From: Jouni Malinen <jouni@codeaurora.org>
To: Kalle Valo <kvalo@codeaurora.org>
Cc: ath11k@lists.infradead.org, linux-wireless@vger.kernel.org,
Anilkumar Kolli <akolli@codeaurora.org>,
Jouni Malinen <jouni@codeaurora.org>
Subject: [PATCH 1/4] ath11k: use hw_params to access board_size and cal_offset
Date: Wed, 21 Jul 2021 23:19:24 +0300 [thread overview]
Message-ID: <20210721201927.100369-2-jouni@codeaurora.org> (raw)
In-Reply-To: <20210721201927.100369-1-jouni@codeaurora.org>
From: Anilkumar Kolli <akolli@codeaurora.org>
Reuse board_size from hw_params, add cal_offset to hw params.
This patch is clean up only, there is no change in functionality.
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-00009-QCAHKSWPL_SILICONZ-1
Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.4.0.1-01838-QCAHKSWPL_SILICONZ-1
Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org>
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
---
drivers/net/wireless/ath/ath11k/core.c | 10 +++++-----
drivers/net/wireless/ath/ath11k/hw.h | 2 +-
drivers/net/wireless/ath/ath11k/qmi.c | 4 ++--
drivers/net/wireless/ath/ath11k/qmi.h | 2 --
4 files changed, 8 insertions(+), 10 deletions(-)
diff --git a/drivers/net/wireless/ath/ath11k/core.c b/drivers/net/wireless/ath/ath11k/core.c
index c97830633f1f..d2ab3b134632 100644
--- a/drivers/net/wireless/ath/ath11k/core.c
+++ b/drivers/net/wireless/ath/ath11k/core.c
@@ -37,7 +37,7 @@ static const struct ath11k_hw_params ath11k_hw_params[] = {
.fw = {
.dir = "IPQ8074/hw2.0",
.board_size = 256 * 1024,
- .cal_size = 256 * 1024,
+ .cal_offset = 128 * 1024,
},
.max_radios = 3,
.bdf_addr = 0x4B0C0000,
@@ -87,7 +87,7 @@ static const struct ath11k_hw_params ath11k_hw_params[] = {
.fw = {
.dir = "IPQ6018/hw1.0",
.board_size = 256 * 1024,
- .cal_size = 256 * 1024,
+ .cal_offset = 128 * 1024,
},
.max_radios = 2,
.bdf_addr = 0x4ABC0000,
@@ -134,7 +134,7 @@ static const struct ath11k_hw_params ath11k_hw_params[] = {
.fw = {
.dir = "QCA6390/hw2.0",
.board_size = 256 * 1024,
- .cal_size = 256 * 1024,
+ .cal_offset = 128 * 1024,
},
.max_radios = 3,
.bdf_addr = 0x4B0C0000,
@@ -180,7 +180,7 @@ static const struct ath11k_hw_params ath11k_hw_params[] = {
.fw = {
.dir = "QCN9074/hw1.0",
.board_size = 256 * 1024,
- .cal_size = 256 * 1024,
+ .cal_offset = 128 * 1024,
},
.max_radios = 1,
.single_pdev_only = false,
@@ -226,7 +226,7 @@ static const struct ath11k_hw_params ath11k_hw_params[] = {
.fw = {
.dir = "WCN6855/hw2.0",
.board_size = 256 * 1024,
- .cal_size = 256 * 1024,
+ .cal_offset = 128 * 1024,
},
.max_radios = 3,
.bdf_addr = 0x4B0C0000,
diff --git a/drivers/net/wireless/ath/ath11k/hw.h b/drivers/net/wireless/ath/ath11k/hw.h
index 5d150cd793b2..3a03e09563e7 100644
--- a/drivers/net/wireless/ath/ath11k/hw.h
+++ b/drivers/net/wireless/ath/ath11k/hw.h
@@ -128,7 +128,7 @@ struct ath11k_hw_params {
struct {
const char *dir;
size_t board_size;
- size_t cal_size;
+ size_t cal_offset;
} fw;
const struct ath11k_hw_ops *hw_ops;
diff --git a/drivers/net/wireless/ath/ath11k/qmi.c b/drivers/net/wireless/ath/ath11k/qmi.c
index b5e34d670715..cc82a431c8b7 100644
--- a/drivers/net/wireless/ath/ath11k/qmi.c
+++ b/drivers/net/wireless/ath/ath11k/qmi.c
@@ -1953,7 +1953,7 @@ ath11k_qmi_prepare_bdf_download(struct ath11k_base *ab, int type,
fw_size = min_t(u32, ab->hw_params.fw.board_size,
fw_entry->size);
- memcpy_toio(bdf_addr + ATH11K_QMI_CALDATA_OFFSET,
+ memcpy_toio(bdf_addr + ab->hw_params.fw.cal_offset,
fw_entry->data, fw_size);
release_firmware(fw_entry);
@@ -1979,7 +1979,7 @@ static int ath11k_qmi_load_bdf_fixed_addr(struct ath11k_base *ab)
return -ENOMEM;
memset(&resp, 0, sizeof(resp));
- bdf_addr = ioremap(ab->hw_params.bdf_addr, ATH11K_QMI_BDF_MAX_SIZE);
+ bdf_addr = ioremap(ab->hw_params.bdf_addr, ab->hw_params.fw.board_size);
if (!bdf_addr) {
ath11k_warn(ab, "failed ioremap for board file\n");
ret = -EIO;
diff --git a/drivers/net/wireless/ath/ath11k/qmi.h b/drivers/net/wireless/ath/ath11k/qmi.h
index 3d5930330703..30236c5d26e2 100644
--- a/drivers/net/wireless/ath/ath11k/qmi.h
+++ b/drivers/net/wireless/ath/ath11k/qmi.h
@@ -13,8 +13,6 @@
#define ATH11K_QMI_WLANFW_TIMEOUT_MS 5000
#define ATH11K_QMI_MAX_BDF_FILE_NAME_SIZE 64
#define ATH11K_QMI_CALDB_ADDRESS 0x4BA00000
-#define ATH11K_QMI_BDF_MAX_SIZE (256 * 1024)
-#define ATH11K_QMI_CALDATA_OFFSET (128 * 1024)
#define ATH11K_QMI_WLANFW_MAX_BUILD_ID_LEN_V01 128
#define ATH11K_QMI_WLFW_SERVICE_ID_V01 0x45
#define ATH11K_QMI_WLFW_SERVICE_VERS_V01 0x01
--
2.25.1
next prev parent reply other threads:[~2021-07-21 20:20 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-07-21 20:19 [PATCH 0/4] ath11k: Add caldata download support from file/EEPROM Jouni Malinen
2021-07-21 20:19 ` Jouni Malinen [this message]
2021-09-24 14:49 ` [PATCH 1/4] ath11k: use hw_params to access board_size and cal_offset Kalle Valo
2021-09-27 4:21 ` akolli
2021-09-28 10:50 ` Kalle Valo
2021-07-21 20:19 ` [PATCH 2/4] ath11k: clean up BDF download functions Jouni Malinen
2021-07-21 20:19 ` [PATCH 3/4] ath11k: add caldata file for multiple radios Jouni Malinen
2021-07-21 20:19 ` [PATCH 4/4] ath11k: add caldata download support from EEPROM Jouni Malinen
2021-09-24 15:04 ` Kalle Valo
2021-09-27 4:42 ` Anilkumar Kolli
2021-09-28 9:24 ` Kalle Valo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210721201927.100369-2-jouni@codeaurora.org \
--to=jouni@codeaurora.org \
--cc=akolli@codeaurora.org \
--cc=ath11k@lists.infradead.org \
--cc=kvalo@codeaurora.org \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).