[PATCH v2] brcmfmac: Add WPA3 Personal with FT to supported cipher suites

* [PATCH v2] brcmfmac: Add WPA3 Personal with FT to supported cipher suites
@ 2021-08-24 22:13 Paweł Drewniak
  2021-08-29  8:33 ` Kalle Valo
  0 siblings, 1 reply; 2+ messages in thread
From: Paweł Drewniak @ 2021-08-24 22:13 UTC (permalink / raw)
  To: linux-wireless
  Cc: brcm80211-dev-list.pdl, SHA-cyfmac-dev-list, Arend van Spriel,
	Franky Lin, Hante Meuleman, Chi-hsien Lin, Wright Feng,
	Chung-hsien Hsu, Paweł Drewniak

This allows the driver to connect to BSSIDs supporting SAE with 802.11r.
Tested on Raspberry Pi 4 Model B (STA) and UniFi 6LR/OpenWRT 21.02.0-rc2.
AP was set to 'sae-mixed' (WPA2/3 Personal).

Signed-off-by: Paweł Drewniak <czajernia@gmail.com>
---
Changes in v2:
- rebase on top of wireless-drivers-next
---
 .../net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c   | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
index cedba56fc..f7b96cd69 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
@@ -1829,6 +1829,14 @@ brcmf_set_key_mgmt(struct net_device *ndev, struct cfg80211_connect_params *sme)
 				profile->use_fwsup = BRCMF_PROFILE_FWSUP_SAE;
 			}
 			break;
+		case WLAN_AKM_SUITE_FT_OVER_SAE:
+			val = WPA3_AUTH_SAE_PSK | WPA2_AUTH_FT;
+			profile->is_ft = true;
+			if (sme->crypto.sae_pwd) {
+				brcmf_dbg(INFO, "using SAE offload\n");
+				profile->use_fwsup = BRCMF_PROFILE_FWSUP_SAE;
+			}
+			break;
 		default:
 			bphy_err(drvr, "invalid cipher group (%d)\n",
 				 sme->crypto.cipher_group);
-- 
2.30.2


^ permalink raw reply related	[flat|nested] 2+ messages in thread