[PATCH v3 1/4] mt76: mt7915: enable HE UL MU-MIMO

[PATCH v3 1/4] mt76: mt7915: enable HE UL MU-MIMO

[Shayne Chen]

Enable HE UL MU-MIMO in sta_rec_muru, which works on both ap and station
mode.

For sending trigger frames, one of the conditions fw uses is to check if
mib rx airtime meets the threshold.
There's a main control of mib rx airtime report register in fw, so we
need to enable the register by mcu cmd instead of directly writing it,
otherwise it will still be disabled by fw.

Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
---
v2: refine mt7915_mcu_sta_muru_tlv()
v3: split patches and rebase to staging tree
---
 .../net/wireless/mediatek/mt76/mt7915/init.c  |  2 -
 .../net/wireless/mediatek/mt76/mt7915/mcu.c   | 46 +++++++++++++++++++
 .../net/wireless/mediatek/mt76/mt7915/mcu.h   |  1 +
 .../net/wireless/mediatek/mt76/mt7915/regs.h  |  1 -
 4 files changed, 47 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/init.c b/drivers/net/wireless/mediatek/mt76/mt7915/init.c
index ffe744e69482..cedecf2c693d 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7915/init.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7915/init.c
@@ -386,8 +386,6 @@ mt7915_mac_init_band(struct mt7915_dev *dev, u8 band)
 	      FIELD_PREP(MT_MDP_RCFR1_RX_DROPPED_MCAST, MT_MDP_TO_HIF);
 	mt76_rmw(dev, MT_MDP_BNRCFR1(band), mask, set);
 
-	mt76_set(dev, MT_WF_RMAC_MIB_AIRTIME0(band), MT_WF_RMAC_MIB_RXTIME_EN);
-
 	mt76_rmw_field(dev, MT_DMA_DCR0(band), MT_DMA_DCR0_MAX_RX_LEN, 1536);
 	/* disable rx rate report by default due to hw issues */
 	mt76_clear(dev, MT_DMA_DCR0(band), MT_DMA_DCR0_RXD_G5_EN);
diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c b/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c
index d4c8759bedd8..8ba60b66e4a9 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c
@@ -1534,6 +1534,7 @@ mt7915_mcu_sta_muru_tlv(struct sk_buff *skb, struct ieee80211_sta *sta,
 			       mvif->cap.he_mu_ebfer ||
 			       mvif->cap.vht_mu_ebfer ||
 			       mvif->cap.vht_mu_ebfee;
+	muru->cfg.mimo_ul_en = true;
 
 	muru->ofdma_dl.punc_pream_rx =
 		HE_PHY(CAP1_PREAMBLE_PUNC_RX_MASK, elem->phy_cap_info[1]);
@@ -2921,6 +2922,47 @@ int mt7915_mcu_set_muru_ctrl(struct mt7915_dev *dev, u32 cmd, u32 val)
 				 sizeof(req), false);
 }
 
+static int
+mt7915_mcu_init_rx_airtime(struct mt7915_dev *dev)
+{
+#define RX_AIRTIME_FEATURE_CTRL		1
+#define RX_AIRTIME_BITWISE_CTRL		2
+#define RX_AIRTIME_CLEAR_EN	1
+	struct {
+		__le16 field;
+		__le16 sub_field;
+		__le32 set_status;
+		__le32 get_status;
+		u8 _rsv[12];
+
+		bool airtime_en;
+		bool mibtime_en;
+		bool earlyend_en;
+		u8 _rsv1[9];
+
+		bool airtime_clear;
+		bool mibtime_clear;
+		u8 _rsv2[98];
+	} __packed req = {
+		.field = cpu_to_le16(RX_AIRTIME_BITWISE_CTRL),
+		.sub_field = cpu_to_le16(RX_AIRTIME_CLEAR_EN),
+		.airtime_clear = true,
+	};
+	int ret;
+
+	ret = mt76_mcu_send_msg(&dev->mt76, MCU_EXT_CMD(RX_AIRTIME_CTRL), &req,
+				sizeof(req), true);
+	if (ret)
+		return ret;
+
+	req.field = cpu_to_le16(RX_AIRTIME_FEATURE_CTRL);
+	req.sub_field = cpu_to_le16(RX_AIRTIME_CLEAR_EN);
+	req.airtime_en = true;
+
+	return mt76_mcu_send_msg(&dev->mt76, MCU_EXT_CMD(RX_AIRTIME_CTRL), &req,
+				 sizeof(req), true);
+}
+
 int mt7915_mcu_init(struct mt7915_dev *dev)
 {
 	static const struct mt76_mcu_ops mt7915_mcu_ops = {
@@ -2955,6 +2997,10 @@ int mt7915_mcu_init(struct mt7915_dev *dev)
 	if (ret)
 		return ret;
 
+	ret = mt7915_mcu_init_rx_airtime(dev);
+	if (ret)
+		return ret;
+
 	return mt7915_mcu_wa_cmd(dev, MCU_WA_PARAM_CMD(SET),
 				 MCU_WA_PARAM_RED, 0, 0);
 }
diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/mcu.h b/drivers/net/wireless/mediatek/mt76/mt7915/mcu.h
index 4043cf547c9e..d66918d914da 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7915/mcu.h
+++ b/drivers/net/wireless/mediatek/mt76/mt7915/mcu.h
@@ -271,6 +271,7 @@ enum {
 	MCU_EXT_CMD_MAC_INIT_CTRL = 0x46,
 	MCU_EXT_CMD_RX_HDR_TRANS = 0x47,
 	MCU_EXT_CMD_MUAR_UPDATE = 0x48,
+	MCU_EXT_CMD_RX_AIRTIME_CTRL = 0x4a,
 	MCU_EXT_CMD_SET_RX_PATH = 0x4e,
 	MCU_EXT_CMD_TX_POWER_FEATURE_CTRL = 0x58,
 	MCU_EXT_CMD_GET_MIB_INFO = 0x5a,
diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/regs.h b/drivers/net/wireless/mediatek/mt76/mt7915/regs.h
index 6771870a867c..a2e98788f421 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7915/regs.h
+++ b/drivers/net/wireless/mediatek/mt76/mt7915/regs.h
@@ -364,7 +364,6 @@
 
 #define MT_WF_RMAC_MIB_AIRTIME0(_band)	MT_WF_RMAC(_band, 0x0380)
 #define MT_WF_RMAC_MIB_RXTIME_CLR	BIT(31)
-#define MT_WF_RMAC_MIB_RXTIME_EN	BIT(30)
 
 /* WFDMA0 */
 #define MT_WFDMA0_BASE			0xd4000
-- 
2.29.2

[PATCH v3 2/4] mt76: mt7915: rework mt7915_mcu_sta_muru_tlv()

[Shayne Chen]

Re-order and modify conditions for MU DL/UL and ofdma DL fields, and
also clean up some unnecessary zero settings.

Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
---
 .../net/wireless/mediatek/mt76/mt7915/mcu.c   | 42 +++++++++----------
 1 file changed, 21 insertions(+), 21 deletions(-)

diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c b/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c
index 8ba60b66e4a9..4c687380120e 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c
@@ -1520,22 +1520,37 @@ mt7915_mcu_sta_muru_tlv(struct sk_buff *skb, struct ieee80211_sta *sta,
 	struct sta_rec_muru *muru;
 	struct tlv *tlv;
 
-	if (!sta->vht_cap.vht_supported && !sta->he_cap.has_he)
+	if (vif->type != NL80211_IFTYPE_STATION &&
+	    vif->type != NL80211_IFTYPE_AP)
+		return;
+
+	if (!sta->vht_cap.vht_supported)
 		return;
 
 	tlv = mt7915_mcu_add_tlv(skb, STA_REC_MURU, sizeof(*muru));
 
 	muru = (struct sta_rec_muru *)tlv;
-	muru->cfg.ofdma_dl_en = true;
 
-	/* A non-AP HE station must support MU beamformee */
-	muru->cfg.mimo_dl_en = (vif->type == NL80211_IFTYPE_STATION &&
-				vif->bss_conf.he_support) ||
-			       mvif->cap.he_mu_ebfer ||
+	muru->cfg.mimo_dl_en = mvif->cap.he_mu_ebfer ||
 			       mvif->cap.vht_mu_ebfer ||
 			       mvif->cap.vht_mu_ebfee;
+
+	muru->mimo_dl.vht_mu_bfee =
+		!!(sta->vht_cap.cap & IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE);
+
+	if (!sta->he_cap.has_he)
+		return;
+
+	muru->mimo_dl.partial_bw_dl_mimo =
+		HE_PHY(CAP6_PARTIAL_BANDWIDTH_DL_MUMIMO, elem->phy_cap_info[6]);
+
 	muru->cfg.mimo_ul_en = true;
+	muru->mimo_ul.full_ul_mimo =
+		HE_PHY(CAP2_UL_MU_FULL_MU_MIMO, elem->phy_cap_info[2]);
+	muru->mimo_ul.partial_ul_mimo =
+		HE_PHY(CAP2_UL_MU_PARTIAL_MU_MIMO, elem->phy_cap_info[2]);
 
+	muru->cfg.ofdma_dl_en = true;
 	muru->ofdma_dl.punc_pream_rx =
 		HE_PHY(CAP1_PREAMBLE_PUNC_RX_MASK, elem->phy_cap_info[1]);
 	muru->ofdma_dl.he_20m_in_40m_2g =
@@ -1544,9 +1559,6 @@ mt7915_mcu_sta_muru_tlv(struct sk_buff *skb, struct ieee80211_sta *sta,
 		HE_PHY(CAP8_20MHZ_IN_160MHZ_HE_PPDU, elem->phy_cap_info[8]);
 	muru->ofdma_dl.he_80m_in_160m =
 		HE_PHY(CAP8_80MHZ_IN_160MHZ_HE_PPDU, elem->phy_cap_info[8]);
-	muru->ofdma_dl.lt16_sigb = 0;
-	muru->ofdma_dl.rx_su_comp_sigb = 0;
-	muru->ofdma_dl.rx_su_non_comp_sigb = 0;
 
 	muru->ofdma_ul.t_frame_dur =
 		HE_MAC(CAP1_TF_MAC_PAD_DUR_MASK, elem->mac_cap_info[1]);
@@ -1554,18 +1566,6 @@ mt7915_mcu_sta_muru_tlv(struct sk_buff *skb, struct ieee80211_sta *sta,
 		HE_MAC(CAP2_MU_CASCADING, elem->mac_cap_info[2]);
 	muru->ofdma_ul.uo_ra =
 		HE_MAC(CAP3_OFDMA_RA, elem->mac_cap_info[3]);
-	muru->ofdma_ul.he_2x996_tone = 0;
-	muru->ofdma_ul.rx_t_frame_11ac = 0;
-
-	muru->mimo_dl.vht_mu_bfee =
-		!!(sta->vht_cap.cap & IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE);
-	muru->mimo_dl.partial_bw_dl_mimo =
-		HE_PHY(CAP6_PARTIAL_BANDWIDTH_DL_MUMIMO, elem->phy_cap_info[6]);
-
-	muru->mimo_ul.full_ul_mimo =
-		HE_PHY(CAP2_UL_MU_FULL_MU_MIMO, elem->phy_cap_info[2]);
-	muru->mimo_ul.partial_ul_mimo =
-		HE_PHY(CAP2_UL_MU_PARTIAL_MU_MIMO, elem->phy_cap_info[2]);
 }
 
 static void
-- 
2.29.2

[PATCH v3 3/4] mt76: mt7915: fix missing HE phy cap

[Shayne Chen]

Fix missing HE phy cap related to vif and starec setting.

Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
---
 drivers/net/wireless/mediatek/mt76/mt7915/init.c | 12 +++++++++---
 drivers/net/wireless/mediatek/mt76/mt7915/mcu.c  |  8 ++++----
 2 files changed, 13 insertions(+), 7 deletions(-)

diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/init.c b/drivers/net/wireless/mediatek/mt76/mt7915/init.c
index cedecf2c693d..274b30a58f05 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7915/init.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7915/init.c
@@ -626,7 +626,6 @@ mt7915_set_stream_he_txbf_caps(struct ieee80211_sta_he_cap *he_cap,
 			       int vif, int nss)
 {
 	struct ieee80211_he_cap_elem *elem = &he_cap->he_cap_elem;
-	struct ieee80211_he_mcs_nss_supp *mcs = &he_cap->he_mcs_nss_supp;
 	u8 c;
 
 #ifdef CONFIG_MAC80211_MESH
@@ -678,8 +677,11 @@ mt7915_set_stream_he_txbf_caps(struct ieee80211_sta_he_cap *he_cap,
 	elem->phy_cap_info[3] |= IEEE80211_HE_PHY_CAP3_SU_BEAMFORMER;
 	elem->phy_cap_info[4] |= IEEE80211_HE_PHY_CAP4_MU_BEAMFORMER;
 
-	/* num_snd_dim */
-	c = (nss - 1) | (max_t(int, le16_to_cpu(mcs->tx_mcs_160), 1) << 3);
+	/* num_snd_dim
+	 * for mt7915, max supported nss is 2 for bw > 80MHz
+	 */
+	c = (nss - 1) |
+	    IEEE80211_HE_PHY_CAP5_BEAMFORMEE_NUM_SND_DIM_ABOVE_80MHZ_2;
 	elem->phy_cap_info[5] |= c;
 
 	c = IEEE80211_HE_PHY_CAP6_TRIG_SU_BEAMFORMING_FB |
@@ -787,7 +789,11 @@ mt7915_init_he_caps(struct mt7915_phy *phy, enum nl80211_band band,
 				IEEE80211_HE_PHY_CAP3_DCM_MAX_CONST_TX_QPSK |
 				IEEE80211_HE_PHY_CAP3_DCM_MAX_CONST_RX_QPSK;
 			he_cap_elem->phy_cap_info[6] |=
+				IEEE80211_HE_PHY_CAP6_PARTIAL_BW_EXT_RANGE |
 				IEEE80211_HE_PHY_CAP6_PPE_THRESHOLD_PRESENT;
+			he_cap_elem->phy_cap_info[9] |=
+				IEEE80211_HE_PHY_CAP9_TX_1024_QAM_LESS_THAN_242_TONE_RU |
+				IEEE80211_HE_PHY_CAP9_RX_1024_QAM_LESS_THAN_242_TONE_RU;
 			break;
 		case NL80211_IFTYPE_STATION:
 			he_cap_elem->mac_cap_info[1] |=
diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c b/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c
index 4c687380120e..b4cc4cb35762 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c
@@ -1396,6 +1396,10 @@ mt7915_mcu_sta_he_tlv(struct sk_buff *skb, struct ieee80211_sta *sta,
 	    IEEE80211_HE_PHY_CAP2_STBC_RX_UNDER_80MHZ)
 		cap |= STA_REC_HE_CAP_LE_EQ_80M_RX_STBC;
 
+	if (elem->phy_cap_info[6] &
+	    IEEE80211_HE_PHY_CAP6_TRIG_CQI_FB)
+		cap |= STA_REC_HE_CAP_TRIG_CQI_FK;
+
 	if (elem->phy_cap_info[6] &
 	    IEEE80211_HE_PHY_CAP6_PARTIAL_BW_EXT_RANGE)
 		cap |= STA_REC_HE_CAP_PARTIAL_BW_EXT_RANGE;
@@ -1420,10 +1424,6 @@ mt7915_mcu_sta_he_tlv(struct sk_buff *skb, struct ieee80211_sta *sta,
 	    IEEE80211_HE_PHY_CAP8_HE_ER_SU_1XLTF_AND_08_US_GI)
 		cap |= STA_REC_HE_CAP_ER_SU_PPDU_1LTF_8US_GI;
 
-	if (elem->phy_cap_info[9] &
-	    IEEE80211_HE_PHY_CAP9_NON_TRIGGERED_CQI_FEEDBACK)
-		cap |= STA_REC_HE_CAP_TRIG_CQI_FK;
-
 	if (elem->phy_cap_info[9] &
 	    IEEE80211_HE_PHY_CAP9_TX_1024_QAM_LESS_THAN_242_TONE_RU)
 		cap |= STA_REC_HE_CAP_TX_1024QAM_UNDER_RU242;
-- 
2.29.2

[PATCH v3 4/4] mt76: mt7915: change max rx len limit of hw modules

[Shayne Chen]

Update max rx len of some hw modules, which aligns out vendor SDK.
In normal modes, we exchange MPDU 7991 cap with peers; however, this
won't play a part in sniffer mode.
To prevent packets which exceed the max MPDU size from entering specific
rx path in hw, we need to set a proper limit to filter them out.

Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
---
 drivers/net/wireless/mediatek/mt76/mt7915/init.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/init.c b/drivers/net/wireless/mediatek/mt76/mt7915/init.c
index 274b30a58f05..b77647b4575e 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7915/init.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7915/init.c
@@ -386,7 +386,7 @@ mt7915_mac_init_band(struct mt7915_dev *dev, u8 band)
 	      FIELD_PREP(MT_MDP_RCFR1_RX_DROPPED_MCAST, MT_MDP_TO_HIF);
 	mt76_rmw(dev, MT_MDP_BNRCFR1(band), mask, set);
 
-	mt76_rmw_field(dev, MT_DMA_DCR0(band), MT_DMA_DCR0_MAX_RX_LEN, 1536);
+	mt76_rmw_field(dev, MT_DMA_DCR0(band), MT_DMA_DCR0_MAX_RX_LEN, 0x680);
 	/* disable rx rate report by default due to hw issues */
 	mt76_clear(dev, MT_DMA_DCR0(band), MT_DMA_DCR0_RXD_G5_EN);
 }
@@ -395,7 +395,7 @@ static void mt7915_mac_init(struct mt7915_dev *dev)
 {
 	int i;
 
-	mt76_rmw_field(dev, MT_MDP_DCR1, MT_MDP_DCR1_MAX_RX_LEN, 1536);
+	mt76_rmw_field(dev, MT_MDP_DCR1, MT_MDP_DCR1_MAX_RX_LEN, 0x400);
 	/* enable hardware de-agg */
 	mt76_set(dev, MT_MDP_DCR0, MT_MDP_DCR0_DAMSDU_EN);
 
-- 
2.29.2