[PATCH AUTOSEL 5.4 16/74] mwifiex: Run SET_BSS_MODE when changing from P2P to STATION vif-type

[PATCH AUTOSEL 5.4 16/74] mwifiex: Run SET_BSS_MODE when changing from P2P to STATION vif-type

[Sasha Levin]

From: Jonas Dreßler <verdre@v0yd.nl>

[ Upstream commit c2e9666cdffd347460a2b17988db4cfaf2a68fb9 ]

We currently handle changing from the P2P to the STATION virtual
interface type slightly different than changing from P2P to ADHOC: When
changing to STATION, we don't send the SET_BSS_MODE command. We do send
that command on all other type-changes though, and it probably makes
sense to send the command since after all we just changed our BSS_MODE.
Looking at prior changes to this part of the code, it seems that this is
simply a leftover from old refactorings.

Since sending the SET_BSS_MODE command is the only difference between
mwifiex_change_vif_to_sta_adhoc() and the current code, we can now use
mwifiex_change_vif_to_sta_adhoc() for both switching to ADHOC and
STATION interface type.

This does not fix any particular bug and just "looked right", so there's
a small chance it might be a regression.

Signed-off-by: Jonas Dreßler <verdre@v0yd.nl>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210914195909.36035-4-verdre@v0yd.nl
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../net/wireless/marvell/mwifiex/cfg80211.c   | 22 ++++---------------
 1 file changed, 4 insertions(+), 18 deletions(-)

diff --git a/drivers/net/wireless/marvell/mwifiex/cfg80211.c b/drivers/net/wireless/marvell/mwifiex/cfg80211.c
index 9e6dc289ec3e8..b5134f11fc32b 100644
--- a/drivers/net/wireless/marvell/mwifiex/cfg80211.c
+++ b/drivers/net/wireless/marvell/mwifiex/cfg80211.c
@@ -1233,29 +1233,15 @@ mwifiex_cfg80211_change_virtual_intf(struct wiphy *wiphy,
 		break;
 	case NL80211_IFTYPE_P2P_CLIENT:
 	case NL80211_IFTYPE_P2P_GO:
+		if (mwifiex_cfg80211_deinit_p2p(priv))
+			return -EFAULT;
+
 		switch (type) {
-		case NL80211_IFTYPE_STATION:
-			if (mwifiex_cfg80211_deinit_p2p(priv))
-				return -EFAULT;
-			priv->adapter->curr_iface_comb.p2p_intf--;
-			priv->adapter->curr_iface_comb.sta_intf++;
-			dev->ieee80211_ptr->iftype = type;
-			if (mwifiex_deinit_priv_params(priv))
-				return -1;
-			if (mwifiex_init_new_priv_params(priv, dev, type))
-				return -1;
-			if (mwifiex_sta_init_cmd(priv, false, false))
-				return -1;
-			break;
 		case NL80211_IFTYPE_ADHOC:
-			if (mwifiex_cfg80211_deinit_p2p(priv))
-				return -EFAULT;
+		case NL80211_IFTYPE_STATION:
 			return mwifiex_change_vif_to_sta_adhoc(dev, curr_iftype,
 							       type, params);
-			break;
 		case NL80211_IFTYPE_AP:
-			if (mwifiex_cfg80211_deinit_p2p(priv))
-				return -EFAULT;
 			return mwifiex_change_vif_to_ap(dev, curr_iftype, type,
 							params);
 		case NL80211_IFTYPE_UNSPECIFIED:
-- 
2.33.0

[PATCH AUTOSEL 5.4 17/74] mwifiex: Properly initialize private structure on interface type changes

[Sasha Levin]

From: Jonas Dreßler <verdre@v0yd.nl>

[ Upstream commit c606008b70627a2fc485732a53cc22f0f66d0981 ]

When creating a new virtual interface in mwifiex_add_virtual_intf(), we
update our internal driver states like bss_type, bss_priority, bss_role
and bss_mode to reflect the mode the firmware will be set to.

When switching virtual interface mode using
mwifiex_init_new_priv_params() though, we currently only update bss_mode
and bss_role. In order for the interface mode switch to actually work,
we also need to update bss_type to its proper value, so do that.

This fixes a crash of the firmware (because the driver tries to execute
commands that are invalid in AP mode) when switching from station mode
to AP mode.

Signed-off-by: Jonas Dreßler <verdre@v0yd.nl>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210914195909.36035-9-verdre@v0yd.nl
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/marvell/mwifiex/cfg80211.c | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/marvell/mwifiex/cfg80211.c b/drivers/net/wireless/marvell/mwifiex/cfg80211.c
index b5134f11fc32b..1599ae74b066b 100644
--- a/drivers/net/wireless/marvell/mwifiex/cfg80211.c
+++ b/drivers/net/wireless/marvell/mwifiex/cfg80211.c
@@ -912,16 +912,20 @@ mwifiex_init_new_priv_params(struct mwifiex_private *priv,
 	switch (type) {
 	case NL80211_IFTYPE_STATION:
 	case NL80211_IFTYPE_ADHOC:
-		priv->bss_role =  MWIFIEX_BSS_ROLE_STA;
+		priv->bss_role = MWIFIEX_BSS_ROLE_STA;
+		priv->bss_type = MWIFIEX_BSS_TYPE_STA;
 		break;
 	case NL80211_IFTYPE_P2P_CLIENT:
-		priv->bss_role =  MWIFIEX_BSS_ROLE_STA;
+		priv->bss_role = MWIFIEX_BSS_ROLE_STA;
+		priv->bss_type = MWIFIEX_BSS_TYPE_P2P;
 		break;
 	case NL80211_IFTYPE_P2P_GO:
-		priv->bss_role =  MWIFIEX_BSS_ROLE_UAP;
+		priv->bss_role = MWIFIEX_BSS_ROLE_UAP;
+		priv->bss_type = MWIFIEX_BSS_TYPE_P2P;
 		break;
 	case NL80211_IFTYPE_AP:
 		priv->bss_role = MWIFIEX_BSS_ROLE_UAP;
+		priv->bss_type = MWIFIEX_BSS_TYPE_UAP;
 		break;
 	default:
 		mwifiex_dbg(adapter, ERROR,
-- 
2.33.0

[PATCH AUTOSEL 5.4 18/74] ath10k: high latency fixes for beacon buffer

[Sasha Levin]

From: Alagu Sankar <alagusankar@silex-india.com>

[ Upstream commit e263bdab9c0e8025fb7f41f153709a9cda51f6b6 ]

Beacon buffer for high latency devices does not use DMA. other similar
buffer allocation methods in the driver have already been modified for
high latency path. Fix the beacon buffer allocation left out in the
earlier high latency changes.

Signed-off-by: Alagu Sankar <alagusankar@silex-india.com>
Signed-off-by: Erik Stromdahl <erik.stromdahl@gmail.com>
[fabio: adapt it to use ar->bus_param.dev_type ]
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210818232627.2040121-1-festevam@denx.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath10k/mac.c | 31 ++++++++++++++++++++-------
 1 file changed, 23 insertions(+), 8 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index 20e248fd43642..603f817ae3a59 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -985,8 +985,12 @@ static void ath10k_mac_vif_beacon_cleanup(struct ath10k_vif *arvif)
 	ath10k_mac_vif_beacon_free(arvif);
 
 	if (arvif->beacon_buf) {
-		dma_free_coherent(ar->dev, IEEE80211_MAX_FRAME_LEN,
-				  arvif->beacon_buf, arvif->beacon_paddr);
+		if (ar->bus_param.dev_type == ATH10K_DEV_TYPE_HL)
+			kfree(arvif->beacon_buf);
+		else
+			dma_free_coherent(ar->dev, IEEE80211_MAX_FRAME_LEN,
+					  arvif->beacon_buf,
+					  arvif->beacon_paddr);
 		arvif->beacon_buf = NULL;
 	}
 }
@@ -5251,10 +5255,17 @@ static int ath10k_add_interface(struct ieee80211_hw *hw,
 	if (vif->type == NL80211_IFTYPE_ADHOC ||
 	    vif->type == NL80211_IFTYPE_MESH_POINT ||
 	    vif->type == NL80211_IFTYPE_AP) {
-		arvif->beacon_buf = dma_alloc_coherent(ar->dev,
-						       IEEE80211_MAX_FRAME_LEN,
-						       &arvif->beacon_paddr,
-						       GFP_ATOMIC);
+		if (ar->bus_param.dev_type == ATH10K_DEV_TYPE_HL) {
+			arvif->beacon_buf = kmalloc(IEEE80211_MAX_FRAME_LEN,
+						    GFP_KERNEL);
+			arvif->beacon_paddr = (dma_addr_t)arvif->beacon_buf;
+		} else {
+			arvif->beacon_buf =
+				dma_alloc_coherent(ar->dev,
+						   IEEE80211_MAX_FRAME_LEN,
+						   &arvif->beacon_paddr,
+						   GFP_ATOMIC);
+		}
 		if (!arvif->beacon_buf) {
 			ret = -ENOMEM;
 			ath10k_warn(ar, "failed to allocate beacon buffer: %d\n",
@@ -5469,8 +5480,12 @@ static int ath10k_add_interface(struct ieee80211_hw *hw,
 
 err:
 	if (arvif->beacon_buf) {
-		dma_free_coherent(ar->dev, IEEE80211_MAX_FRAME_LEN,
-				  arvif->beacon_buf, arvif->beacon_paddr);
+		if (ar->bus_param.dev_type == ATH10K_DEV_TYPE_HL)
+			kfree(arvif->beacon_buf);
+		else
+			dma_free_coherent(ar->dev, IEEE80211_MAX_FRAME_LEN,
+					  arvif->beacon_buf,
+					  arvif->beacon_paddr);
 		arvif->beacon_buf = NULL;
 	}
 
-- 
2.33.0