* [PATCH] ath11k: set WMI_PEER_40MHZ while peer assoc for 6 GHz
@ 2022-01-13 2:31 Wen Gong
2022-01-17 13:08 ` Kalle Valo
0 siblings, 1 reply; 4+ messages in thread
From: Wen Gong @ 2022-01-13 2:31 UTC (permalink / raw)
To: ath11k; +Cc: linux-wireless, quic_wgong
When station connect to AP of 6 GHz with 40 MHz bandwidth, the TX is
always stay 20 MHz, it is because the flag WMI_PEER_40MHZ is not set
while peer assoc. Add the flag if remote peer is 40 MHz bandwidth.
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-02892.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1
Fixes: 2cdf2b3cdf54 ("ath11k: add 6ghz params in peer assoc command")
Signed-off-by: Wen Gong <quic_wgong@quicinc.com>
---
drivers/net/wireless/ath/ath11k/mac.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/net/wireless/ath/ath11k/mac.c b/drivers/net/wireless/ath/ath11k/mac.c
index 07f499d5ec92..fe4103bcfee3 100644
--- a/drivers/net/wireless/ath/ath11k/mac.c
+++ b/drivers/net/wireless/ath/ath11k/mac.c
@@ -2319,6 +2319,9 @@ static void ath11k_peer_assoc_h_he_6ghz(struct ath11k *ar,
if (!arg->he_flag || band != NL80211_BAND_6GHZ || !sta->he_6ghz_capa.capa)
return;
+ if (sta->bandwidth == IEEE80211_STA_RX_BW_40)
+ arg->bw_40 = true;
+
if (sta->bandwidth == IEEE80211_STA_RX_BW_80)
arg->bw_80 = true;
base-commit: 69a6130e6ab00306fe1552c73eb0d7a0dd4b4c04
--
2.31.1
^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [PATCH] ath11k: set WMI_PEER_40MHZ while peer assoc for 6 GHz
2022-01-13 2:31 [PATCH] ath11k: set WMI_PEER_40MHZ while peer assoc for 6 GHz Wen Gong
@ 2022-01-17 13:08 ` Kalle Valo
2022-01-18 2:43 ` Wen Gong
0 siblings, 1 reply; 4+ messages in thread
From: Kalle Valo @ 2022-01-17 13:08 UTC (permalink / raw)
To: Wen Gong; +Cc: ath11k, linux-wireless, quic_wgong
Wen Gong <quic_wgong@quicinc.com> wrote:
> When station connect to AP of 6 GHz with 40 MHz bandwidth, the TX is
> always stay 20 MHz, it is because the flag WMI_PEER_40MHZ is not set
> while peer assoc. Add the flag if remote peer is 40 MHz bandwidth.
>
> Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-02892.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1
Fixes tag
Fixes: 2cdf2b3cdf54 ("ath11k: add 6ghz params in peer assoc command")
has these problem(s):
- Target SHA1 does not exist
Did you mean:
Fixes: c3a7d7eb4c98 ("ath11k: add 6 GHz params in peer assoc command")
--
https://patchwork.kernel.org/project/linux-wireless/patch/20220113023145.14292-1-quic_wgong@quicinc.com/
https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH] ath11k: set WMI_PEER_40MHZ while peer assoc for 6 GHz
2022-01-17 13:08 ` Kalle Valo
@ 2022-01-18 2:43 ` Wen Gong
2022-01-18 6:33 ` Kalle Valo
0 siblings, 1 reply; 4+ messages in thread
From: Wen Gong @ 2022-01-18 2:43 UTC (permalink / raw)
To: Kalle Valo; +Cc: ath11k, linux-wireless
On 1/17/2022 9:08 PM, Kalle Valo wrote:
> Wen Gong <quic_wgong@quicinc.com> wrote:
>
>> When station connect to AP of 6 GHz with 40 MHz bandwidth, the TX is
>> always stay 20 MHz, it is because the flag WMI_PEER_40MHZ is not set
>> while peer assoc. Add the flag if remote peer is 40 MHz bandwidth.
>>
>> Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-02892.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1
> Fixes tag
>
> Fixes: 2cdf2b3cdf54 ("ath11k: add 6ghz params in peer assoc command")
>
> has these problem(s):
>
> - Target SHA1 does not exist
>
> Did you mean:
>
> Fixes: c3a7d7eb4c98 ("ath11k: add 6 GHz params in peer assoc command")
Thanks.
yes, it is.
I see you have already changed it in master-pending.
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH] ath11k: set WMI_PEER_40MHZ while peer assoc for 6 GHz
2022-01-18 2:43 ` Wen Gong
@ 2022-01-18 6:33 ` Kalle Valo
0 siblings, 0 replies; 4+ messages in thread
From: Kalle Valo @ 2022-01-18 6:33 UTC (permalink / raw)
To: Wen Gong; +Cc: ath11k, linux-wireless
Wen Gong <quic_wgong@quicinc.com> writes:
> On 1/17/2022 9:08 PM, Kalle Valo wrote:
>> Wen Gong <quic_wgong@quicinc.com> wrote:
>>
>>> When station connect to AP of 6 GHz with 40 MHz bandwidth, the TX is
>>> always stay 20 MHz, it is because the flag WMI_PEER_40MHZ is not set
>>> while peer assoc. Add the flag if remote peer is 40 MHz bandwidth.
>>>
>>> Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-02892.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1
>> Fixes tag
>>
>> Fixes: 2cdf2b3cdf54 ("ath11k: add 6ghz params in peer assoc command")
>>
>> has these problem(s):
>>
>> - Target SHA1 does not exist
>>
>> Did you mean:
>>
>> Fixes: c3a7d7eb4c98 ("ath11k: add 6 GHz params in peer assoc command")
>
> Thanks.
>
> yes, it is.
>
> I see you have already changed it in master-pending.
Yeah, so no need to resend because of this.
--
https://patchwork.kernel.org/project/linux-wireless/list/
https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2022-01-18 6:33 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-01-13 2:31 [PATCH] ath11k: set WMI_PEER_40MHZ while peer assoc for 6 GHz Wen Gong
2022-01-17 13:08 ` Kalle Valo
2022-01-18 2:43 ` Wen Gong
2022-01-18 6:33 ` Kalle Valo
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).