* [PATCH] ath10k: add spectral scan support to wmi-tlv
@ 2016-11-14 13:26 Michal Kazior
2016-11-23 13:57 ` Kalle Valo
0 siblings, 1 reply; 2+ messages in thread
From: Michal Kazior @ 2016-11-14 13:26 UTC (permalink / raw)
To: ath10k; +Cc: linux-wireless, Michal Kazior
Command structure and event flow doesn't seem to
be any different compared to existing
implementation for other firmware branches.
This patch effectively adds in-driver support for
spectral scanning on QCA61x4 and QCA9377.
Tested QCA9377 w/ WLAN.TF.1.0-00267-1.
Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
---
drivers/net/wireless/ath/ath10k/wmi-tlv.c | 72 +++++++++++++++++++++++++++++++
1 file changed, 72 insertions(+)
diff --git a/drivers/net/wireless/ath/ath10k/wmi-tlv.c b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
index e64f59300a7c..7f9b1185b549 100644
--- a/drivers/net/wireless/ath/ath10k/wmi-tlv.c
+++ b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
@@ -3136,6 +3136,76 @@ ath10k_wmi_tlv_op_gen_echo(struct ath10k *ar, u32 value)
return skb;
}
+static struct sk_buff *
+ath10k_wmi_tlv_op_gen_vdev_spectral_conf(struct ath10k *ar,
+ const struct wmi_vdev_spectral_conf_arg *arg)
+{
+ struct wmi_vdev_spectral_conf_cmd *cmd;
+ struct sk_buff *skb;
+ struct wmi_tlv *tlv;
+ void *ptr;
+ size_t len;
+
+ len = sizeof(*tlv) + sizeof(*cmd);
+ skb = ath10k_wmi_alloc_skb(ar, len);
+ if (!skb)
+ return ERR_PTR(-ENOMEM);
+
+ ptr = (void *)skb->data;
+ tlv = ptr;
+ tlv->tag = __cpu_to_le16(WMI_TLV_TAG_STRUCT_VDEV_SPECTRAL_CONFIGURE_CMD);
+ tlv->len = __cpu_to_le16(sizeof(*cmd));
+ cmd = (void *)tlv->value;
+ cmd->vdev_id = __cpu_to_le32(arg->vdev_id);
+ cmd->scan_count = __cpu_to_le32(arg->scan_count);
+ cmd->scan_period = __cpu_to_le32(arg->scan_period);
+ cmd->scan_priority = __cpu_to_le32(arg->scan_priority);
+ cmd->scan_fft_size = __cpu_to_le32(arg->scan_fft_size);
+ cmd->scan_gc_ena = __cpu_to_le32(arg->scan_gc_ena);
+ cmd->scan_restart_ena = __cpu_to_le32(arg->scan_restart_ena);
+ cmd->scan_noise_floor_ref = __cpu_to_le32(arg->scan_noise_floor_ref);
+ cmd->scan_init_delay = __cpu_to_le32(arg->scan_init_delay);
+ cmd->scan_nb_tone_thr = __cpu_to_le32(arg->scan_nb_tone_thr);
+ cmd->scan_str_bin_thr = __cpu_to_le32(arg->scan_str_bin_thr);
+ cmd->scan_wb_rpt_mode = __cpu_to_le32(arg->scan_wb_rpt_mode);
+ cmd->scan_rssi_rpt_mode = __cpu_to_le32(arg->scan_rssi_rpt_mode);
+ cmd->scan_rssi_thr = __cpu_to_le32(arg->scan_rssi_thr);
+ cmd->scan_pwr_format = __cpu_to_le32(arg->scan_pwr_format);
+ cmd->scan_rpt_mode = __cpu_to_le32(arg->scan_rpt_mode);
+ cmd->scan_bin_scale = __cpu_to_le32(arg->scan_bin_scale);
+ cmd->scan_dbm_adj = __cpu_to_le32(arg->scan_dbm_adj);
+ cmd->scan_chn_mask = __cpu_to_le32(arg->scan_chn_mask);
+
+ return skb;
+}
+
+static struct sk_buff *
+ath10k_wmi_tlv_op_gen_vdev_spectral_enable(struct ath10k *ar, u32 vdev_id,
+ u32 trigger, u32 enable)
+{
+ struct wmi_vdev_spectral_enable_cmd *cmd;
+ struct sk_buff *skb;
+ struct wmi_tlv *tlv;
+ void *ptr;
+ size_t len;
+
+ len = sizeof(*tlv) + sizeof(*cmd);
+ skb = ath10k_wmi_alloc_skb(ar, len);
+ if (!skb)
+ return ERR_PTR(-ENOMEM);
+
+ ptr = (void *)skb->data;
+ tlv = ptr;
+ tlv->tag = __cpu_to_le16(WMI_TLV_TAG_STRUCT_VDEV_SPECTRAL_ENABLE_CMD);
+ tlv->len = __cpu_to_le16(sizeof(*cmd));
+ cmd = (void *)tlv->value;
+ cmd->vdev_id = __cpu_to_le32(vdev_id);
+ cmd->trigger_cmd = __cpu_to_le32(trigger);
+ cmd->enable_cmd = __cpu_to_le32(enable);
+
+ return skb;
+}
+
/****************/
/* TLV mappings */
/****************/
@@ -3542,6 +3612,8 @@ static const struct wmi_ops wmi_tlv_ops = {
.fw_stats_fill = ath10k_wmi_main_op_fw_stats_fill,
.get_vdev_subtype = ath10k_wmi_op_get_vdev_subtype,
.gen_echo = ath10k_wmi_tlv_op_gen_echo,
+ .gen_vdev_spectral_conf = ath10k_wmi_tlv_op_gen_vdev_spectral_conf,
+ .gen_vdev_spectral_enable = ath10k_wmi_tlv_op_gen_vdev_spectral_enable,
};
static const struct wmi_peer_flags_map wmi_tlv_peer_flags_map = {
--
2.1.4
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: ath10k: add spectral scan support to wmi-tlv
2016-11-14 13:26 [PATCH] ath10k: add spectral scan support to wmi-tlv Michal Kazior
@ 2016-11-23 13:57 ` Kalle Valo
0 siblings, 0 replies; 2+ messages in thread
From: Kalle Valo @ 2016-11-23 13:57 UTC (permalink / raw)
To: Michal Kazior; +Cc: ath10k, linux-wireless, Michal Kazior
Michal Kazior <michal.kazior@tieto.com> wrote:
> Command structure and event flow doesn't seem to
> be any different compared to existing
> implementation for other firmware branches.
>
> This patch effectively adds in-driver support for
> spectral scanning on QCA61x4 and QCA9377.
>
> Tested QCA9377 w/ WLAN.TF.1.0-00267-1.
>
> Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Patch applied to ath-next branch of ath.git, thanks.
5a401f36ba30 ath10k: add spectral scan support to wmi-tlv
--
https://patchwork.kernel.org/patch/9427503/
Documentation about submitting wireless patches and checking status
from patchwork:
https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2016-11-23 13:57 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-11-14 13:26 [PATCH] ath10k: add spectral scan support to wmi-tlv Michal Kazior
2016-11-23 13:57 ` Kalle Valo
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).