* [PATCH 1/2] cfg80211: add support to probe unexercised mesh link
2019-02-14 13:56 [PATCH 0/2] wireless: Add support to probe unexercised mesh link Rajkumar Manoharan
@ 2019-02-14 13:56 ` Rajkumar Manoharan
2019-02-15 10:45 ` Johannes Berg
2019-02-14 13:56 ` [PATCH 2/2] mac80211: probe unexercised mesh links Rajkumar Manoharan
1 sibling, 1 reply; 6+ messages in thread
From: Rajkumar Manoharan @ 2019-02-14 13:56 UTC (permalink / raw)
To: johannes; +Cc: linux-wireless, kevinhayes, julanhsu, Rajkumar Manoharan
Adding support to allow mesh HWMP to measure link metrics on unexercised
direct mesh path by sending some data frames to other mesh points which
are not currently selected as a primary traffic path but only 1 hop away.
The absence of the primary path to the chosen node makes it necessary to
apply some form of marking on a chosen packet stream so that the packets
can be properly steered to the selected node for testing, and not by the
regular mesh path lookup.
Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org>
---
include/net/cfg80211.h | 6 ++++++
include/uapi/linux/nl80211.h | 15 +++++++++++++++
net/wireless/nl80211.c | 45 ++++++++++++++++++++++++++++++++++++++++++++
net/wireless/rdev-ops.h | 13 +++++++++++++
net/wireless/trace.h | 19 +++++++++++++++++++
5 files changed, 98 insertions(+)
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index e0c41eb1c860..d89ad87ec17a 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -3379,6 +3379,9 @@ struct cfg80211_pmsr_request {
* Statistics should be cumulative, currently no way to reset is provided.
* @start_pmsr: start peer measurement (e.g. FTM)
* @abort_pmsr: abort peer measurement
+ *
+ * @probe_mesh_link: Probe direct Mesh peer's link quality by sending data frame
+ * and overrule HWMP path selection algorithm.
*/
struct cfg80211_ops {
int (*suspend)(struct wiphy *wiphy, struct cfg80211_wowlan *wow);
@@ -3693,6 +3696,9 @@ struct cfg80211_ops {
struct cfg80211_pmsr_request *request);
void (*abort_pmsr)(struct wiphy *wiphy, struct wireless_dev *wdev,
struct cfg80211_pmsr_request *request);
+
+ int (*probe_mesh_link)(struct wiphy *wiphy, struct net_device *dev,
+ const u8 *dest, const u8 *buf, size_t len);
};
/*
diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h
index 31ae5c7f10e3..a9169bd02099 100644
--- a/include/uapi/linux/nl80211.h
+++ b/include/uapi/linux/nl80211.h
@@ -1065,6 +1065,20 @@
* indicated by %NL80211_ATTR_WIPHY_FREQ and other attributes
* determining the width and type.
*
+ * @NL80211_CMD_PROBE_MESH_LINK: The requirement for mesh link metric
+ * refreshing, is that from one mesh point we be able to send some data
+ * frames to other mesh points which are not currently selected as a
+ * primary traffic path, but which are only 1 hop away. The absence of
+ * the primary path to the chosen node makes it necessary to apply some
+ * form of marking on a chosen packet stream so that the packets can be
+ * properly steered to the selected node for testing, and not by the
+ * regular mesh path lookup. Further, the packets must be of type data
+ * so that the rate control (often embedded in firmware) is used for
+ * rate selection.
+ *
+ * Uses %NL80211_ATTR_MAC and %NL80211_ATTR_FRAME attributes. The frame
+ * content here is ethernet data.
+ *
* @NL80211_CMD_MAX: highest used command number
* @__NL80211_CMD_AFTER_LAST: internal use
*/
@@ -1284,6 +1298,7 @@ enum nl80211_commands {
NL80211_CMD_PEER_MEASUREMENT_COMPLETE,
NL80211_CMD_NOTIFY_RADAR,
+ NL80211_CMD_PROBE_MESH_LINK,
/* add new commands above here */
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index d91a408db113..23d8cba787a0 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -13205,6 +13205,43 @@ static int nl80211_get_ftm_responder_stats(struct sk_buff *skb,
return -ENOBUFS;
}
+static int nl80211_probe_mesh_link(struct sk_buff *skb, struct genl_info *info)
+{
+ struct cfg80211_registered_device *rdev = info->user_ptr[0];
+ struct net_device *dev = info->user_ptr[1];
+ struct wireless_dev *wdev = dev->ieee80211_ptr;
+ const u8 *buf;
+ size_t len;
+ u8 *dest;
+ int err;
+
+ if (!rdev->ops->probe_mesh_link)
+ return -EOPNOTSUPP;
+
+ if (!info->attrs[NL80211_ATTR_MAC] ||
+ !info->attrs[NL80211_ATTR_FRAME]) {
+ GENL_SET_ERR_MSG(info, "Frame or MAC missing");
+ return -EINVAL;
+ }
+
+ wdev_lock(wdev);
+ if (wdev->iftype != NL80211_IFTYPE_MESH_POINT) {
+ err = -EOPNOTSUPP;
+ goto out;
+ }
+ wdev_unlock(wdev);
+
+ dest = nla_data(info->attrs[NL80211_ATTR_MAC]);
+ buf = nla_data(info->attrs[NL80211_ATTR_FRAME]);
+ len = nla_len(info->attrs[NL80211_ATTR_FRAME]);
+
+ return rdev_probe_mesh_link(rdev, dev, dest, buf, len);
+
+ out:
+ wdev_unlock(wdev);
+ return err;
+}
+
#define NL80211_FLAG_NEED_WIPHY 0x01
#define NL80211_FLAG_NEED_NETDEV 0x02
#define NL80211_FLAG_NEED_RTNL 0x04
@@ -14139,6 +14176,14 @@ static void nl80211_post_doit(const struct genl_ops *ops, struct sk_buff *skb,
.internal_flags = NL80211_FLAG_NEED_NETDEV_UP |
NL80211_FLAG_NEED_RTNL,
},
+ {
+ .cmd = NL80211_CMD_PROBE_MESH_LINK,
+ .doit = nl80211_probe_mesh_link,
+ .policy = nl80211_policy,
+ .flags = GENL_UNS_ADMIN_PERM,
+ .internal_flags = NL80211_FLAG_NEED_NETDEV_UP |
+ NL80211_FLAG_NEED_RTNL,
+ },
};
static struct genl_family nl80211_fam __ro_after_init = {
diff --git a/net/wireless/rdev-ops.h b/net/wireless/rdev-ops.h
index 5cb48d135fab..2d8d00bea2ef 100644
--- a/net/wireless/rdev-ops.h
+++ b/net/wireless/rdev-ops.h
@@ -1272,4 +1272,17 @@ static inline int rdev_del_pmk(struct cfg80211_registered_device *rdev,
trace_rdev_return_void(&rdev->wiphy);
}
+static inline int
+rdev_probe_mesh_link(struct cfg80211_registered_device *rdev,
+ struct net_device *dev, const u8 *dest,
+ const void *buf, size_t len)
+{
+ int ret;
+
+ trace_rdev_probe_mesh_link(&rdev->wiphy, dev, dest, buf, len);
+ ret = rdev->ops->probe_mesh_link(&rdev->wiphy, dev, dest, buf, len);
+ trace_rdev_return_int(&rdev->wiphy, ret);
+ return ret;
+}
+
#endif /* __CFG80211_RDEV_OPS */
diff --git a/net/wireless/trace.h b/net/wireless/trace.h
index 44b2ce1bb13a..274a844c7ea9 100644
--- a/net/wireless/trace.h
+++ b/net/wireless/trace.h
@@ -3362,6 +3362,25 @@
WIPHY_PR_ARG, WDEV_PR_ARG,
(unsigned long long)__entry->cookie)
);
+
+TRACE_EVENT(rdev_probe_mesh_link,
+ TP_PROTO(struct wiphy *wiphy, struct net_device *netdev,
+ const u8 *dest, const u8 *buf, size_t len),
+ TP_ARGS(wiphy, netdev, dest, buf, len),
+ TP_STRUCT__entry(
+ WIPHY_ENTRY
+ NETDEV_ENTRY
+ MAC_ENTRY(dest)
+ ),
+ TP_fast_assign(
+ WIPHY_ASSIGN;
+ NETDEV_ASSIGN;
+ MAC_ASSIGN(dest, dest);
+ ),
+ TP_printk(WIPHY_PR_FMT ", " NETDEV_PR_FMT ", " MAC_PR_FMT,
+ WIPHY_PR_ARG, NETDEV_PR_ARG, MAC_PR_ARG(dest))
+);
+
#endif /* !__RDEV_OPS_TRACE || TRACE_HEADER_MULTI_READ */
#undef TRACE_INCLUDE_PATH
--
1.9.1
^ permalink raw reply related [flat|nested] 6+ messages in thread* [PATCH 2/2] mac80211: probe unexercised mesh links
2019-02-14 13:56 [PATCH 0/2] wireless: Add support to probe unexercised mesh link Rajkumar Manoharan
2019-02-14 13:56 ` [PATCH 1/2] cfg80211: add " Rajkumar Manoharan
@ 2019-02-14 13:56 ` Rajkumar Manoharan
2019-02-15 10:44 ` Johannes Berg
1 sibling, 1 reply; 6+ messages in thread
From: Rajkumar Manoharan @ 2019-02-14 13:56 UTC (permalink / raw)
To: johannes; +Cc: linux-wireless, kevinhayes, julanhsu, Rajkumar Manoharan
The requirement for mesh link metric refreshing, is that from one
mesh point we be able to send some data frames to other mesh points
which are not currently selected as a primary traffic path, but which
are only 1 hop away. The absence of the primary path to the chosen node
makes it necessary to apply some form of marking on a chosen packet
stream so that the packets can be properly steered to the selected node
for testing, and not by the regular mesh path lookup.
Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org>
---
include/net/mac80211.h | 2 ++
net/mac80211/cfg.c | 1 +
net/mac80211/ieee80211_i.h | 5 +++-
net/mac80211/mesh_hwmp.c | 4 +++
net/mac80211/tdls.c | 2 +-
net/mac80211/tx.c | 66 +++++++++++++++++++++++++++++++++++++++++-----
6 files changed, 71 insertions(+), 9 deletions(-)
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index 88219cc137c3..65a5889be6b0 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -786,6 +786,7 @@ enum mac80211_tx_info_flags {
* @IEEE80211_TX_CTRL_RATE_INJECT: This frame is injected with rate information
* @IEEE80211_TX_CTRL_AMSDU: This frame is an A-MSDU frame
* @IEEE80211_TX_CTRL_FAST_XMIT: This frame is going through the fast_xmit path
+ * @IEEE80211_TX_CTRL_SKIP_MPATH_LOOKUP: This frame skips mesh path lookup
*
* These flags are used in tx_info->control.flags.
*/
@@ -795,6 +796,7 @@ enum mac80211_tx_control_flags {
IEEE80211_TX_CTRL_RATE_INJECT = BIT(2),
IEEE80211_TX_CTRL_AMSDU = BIT(3),
IEEE80211_TX_CTRL_FAST_XMIT = BIT(4),
+ IEEE80211_TX_CTRL_SKIP_MPATH_LOOKUP = BIT(5),
};
/*
diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index 2493c74c2d37..ceddf7a982f7 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -3974,4 +3974,5 @@ static int ieee80211_get_txq_stats(struct wiphy *wiphy,
.get_ftm_responder_stats = ieee80211_get_ftm_responder_stats,
.start_pmsr = ieee80211_start_pmsr,
.abort_pmsr = ieee80211_abort_pmsr,
+ .probe_mesh_link = ieee80211_probe_mesh_link,
};
diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h
index 7dfb4e2f98b2..2986da5d4fb0 100644
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -1736,7 +1736,8 @@ netdev_tx_t ieee80211_subif_start_xmit(struct sk_buff *skb,
struct net_device *dev);
void __ieee80211_subif_start_xmit(struct sk_buff *skb,
struct net_device *dev,
- u32 info_flags);
+ u32 info_flags,
+ u32 ctrl_flags);
void ieee80211_purge_tx_queue(struct ieee80211_hw *hw,
struct sk_buff_head *skbs);
struct sk_buff *
@@ -1753,6 +1754,8 @@ void ieee80211_tx_monitor(struct ieee80211_local *local, struct sk_buff *skb,
int ieee80211_tx_control_port(struct wiphy *wiphy, struct net_device *dev,
const u8 *buf, size_t len,
const u8 *dest, __be16 proto, bool unencrypted);
+int ieee80211_probe_mesh_link(struct wiphy *wiphy, struct net_device *dev,
+ const u8 *dest, const u8 *buf, size_t len);
/* HT */
void ieee80211_apply_htcap_overrides(struct ieee80211_sub_if_data *sdata,
diff --git a/net/mac80211/mesh_hwmp.c b/net/mac80211/mesh_hwmp.c
index 6950cd0bf594..fe11bbd137ef 100644
--- a/net/mac80211/mesh_hwmp.c
+++ b/net/mac80211/mesh_hwmp.c
@@ -1118,6 +1118,10 @@ int mesh_nexthop_resolve(struct ieee80211_sub_if_data *sdata,
if (ieee80211_is_qos_nullfunc(hdr->frame_control))
return 0;
+ /* Allow injected packets to bypass mesh routing */
+ if (info->control.flags & IEEE80211_TX_CTRL_SKIP_MPATH_LOOKUP)
+ return 0;
+
rcu_read_lock();
err = mesh_nexthop_lookup(sdata, skb);
if (!err)
diff --git a/net/mac80211/tdls.c b/net/mac80211/tdls.c
index 6c647f425e05..044dad3e0423 100644
--- a/net/mac80211/tdls.c
+++ b/net/mac80211/tdls.c
@@ -1055,7 +1055,7 @@ static void ieee80211_tdls_add_ies(struct ieee80211_sub_if_data *sdata,
/* disable bottom halves when entering the Tx path */
local_bh_disable();
- __ieee80211_subif_start_xmit(skb, dev, flags);
+ __ieee80211_subif_start_xmit(skb, dev, flags, 0);
local_bh_enable();
return ret;
diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c
index 928f13a208b0..77ae4026aa0b 100644
--- a/net/mac80211/tx.c
+++ b/net/mac80211/tx.c
@@ -2424,6 +2424,7 @@ static int ieee80211_lookup_ra_sta(struct ieee80211_sub_if_data *sdata,
* @sdata: virtual interface to build the header for
* @skb: the skb to build the header in
* @info_flags: skb flags to set
+ * @ctrl_flags: info control flags to set
*
* This function takes the skb with 802.3 header and reformats the header to
* the appropriate IEEE 802.11 header based on which interface the packet is
@@ -2439,7 +2440,7 @@ static int ieee80211_lookup_ra_sta(struct ieee80211_sub_if_data *sdata,
*/
static struct sk_buff *ieee80211_build_hdr(struct ieee80211_sub_if_data *sdata,
struct sk_buff *skb, u32 info_flags,
- struct sta_info *sta)
+ struct sta_info *sta, u32 ctrl_flags)
{
struct ieee80211_local *local = sdata->local;
struct ieee80211_tx_info *info;
@@ -2811,6 +2812,7 @@ static struct sk_buff *ieee80211_build_hdr(struct ieee80211_sub_if_data *sdata,
info->flags = info_flags;
info->ack_frame_id = info_id;
info->band = band;
+ info->control.flags = ctrl_flags;
return skb;
free:
@@ -3638,7 +3640,8 @@ struct sk_buff *ieee80211_tx_dequeue(struct ieee80211_hw *hw,
void __ieee80211_subif_start_xmit(struct sk_buff *skb,
struct net_device *dev,
- u32 info_flags)
+ u32 info_flags,
+ u32 ctrl_flags)
{
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
struct sta_info *sta;
@@ -3703,7 +3706,8 @@ void __ieee80211_subif_start_xmit(struct sk_buff *skb,
skb->prev = NULL;
skb->next = NULL;
- skb = ieee80211_build_hdr(sdata, skb, info_flags, sta);
+ skb = ieee80211_build_hdr(sdata, skb, info_flags,
+ sta, ctrl_flags);
if (IS_ERR(skb))
goto out;
@@ -3843,9 +3847,9 @@ netdev_tx_t ieee80211_subif_start_xmit(struct sk_buff *skb,
__skb_queue_head_init(&queue);
ieee80211_convert_to_unicast(skb, dev, &queue);
while ((skb = __skb_dequeue(&queue)))
- __ieee80211_subif_start_xmit(skb, dev, 0);
+ __ieee80211_subif_start_xmit(skb, dev, 0, 0);
} else {
- __ieee80211_subif_start_xmit(skb, dev, 0);
+ __ieee80211_subif_start_xmit(skb, dev, 0, 0);
}
return NETDEV_TX_OK;
@@ -3870,7 +3874,7 @@ struct sk_buff *
goto out;
}
- skb = ieee80211_build_hdr(sdata, skb, info_flags, sta);
+ skb = ieee80211_build_hdr(sdata, skb, info_flags, sta, 0);
if (IS_ERR(skb))
goto out;
@@ -4907,7 +4911,55 @@ int ieee80211_tx_control_port(struct wiphy *wiphy, struct net_device *dev,
skb_reset_mac_header(skb);
local_bh_disable();
- __ieee80211_subif_start_xmit(skb, skb->dev, flags);
+ __ieee80211_subif_start_xmit(skb, skb->dev, flags, 0);
+ local_bh_enable();
+
+ return 0;
+}
+
+int ieee80211_probe_mesh_link(struct wiphy *wiphy, struct net_device *dev,
+ const u8 *dest, const u8 *buf, size_t len)
+{
+ struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+ struct ieee80211_local *local = sdata->local;
+ struct sta_info *sta;
+ struct sk_buff *skb;
+ struct ethhdr *ehdr;
+
+ if (len < sizeof(*ehdr))
+ return -EINVAL;
+
+ mutex_lock(&local->sta_mtx);
+ sta = sta_info_get_bss(sdata, dest);
+ mutex_unlock(&local->sta_mtx);
+
+ if (!sta)
+ return -ENOENT;
+
+ ehdr = (struct ethhdr *)buf;
+ if (!ether_addr_equal(ehdr->h_dest, dest) ||
+ !ether_addr_equal(ehdr->h_source, sdata->vif.addr) ||
+ is_multicast_ether_addr(ehdr->h_dest))
+ return -EINVAL;
+
+ if (ehdr->h_proto != htons(ETH_P_802_3))
+ return -EINVAL;
+
+ skb = dev_alloc_skb(local->hw.extra_tx_headroom + len);
+ if (!skb)
+ return -ENOMEM;
+
+ skb_reserve(skb, local->hw.extra_tx_headroom);
+ skb_put_data(skb, buf, len);
+
+ skb->dev = dev;
+ skb->protocol = htons(ETH_P_802_3);
+ skb_reset_network_header(skb);
+ skb_reset_mac_header(skb);
+
+ local_bh_disable();
+ __ieee80211_subif_start_xmit(skb, skb->dev, 0,
+ IEEE80211_TX_CTRL_SKIP_MPATH_LOOKUP);
local_bh_enable();
return 0;
--
1.9.1
^ permalink raw reply related [flat|nested] 6+ messages in thread