From: <sean.wang@mediatek.com>
To: <nbd@nbd.name>, <lorenzo.bianconi@redhat.com>
Cc: <sean.wang@mediatek.com>, <Soul.Huang@mediatek.com>,
<YN.Chen@mediatek.com>, <Leon.Yen@mediatek.com>,
<Eric-SY.Chang@mediatek.com>, <Deren.Wu@mediatek.com>,
<km.lin@mediatek.com>, <robin.chiu@mediatek.com>,
<ch.yeh@mediatek.com>, <posh.sun@mediatek.com>,
<Eric.Liang@mediatek.com>, <Stella.Chang@mediatek.com>,
<jemele@google.com>, <yenlinlai@google.com>,
<linux-wireless@vger.kernel.org>,
<linux-mediatek@lists.infradead.org>
Subject: [PATCH] mt76: mt7921: fix firmware usage of RA info using legacy rates
Date: Wed, 11 Aug 2021 13:58:24 +0800 [thread overview]
Message-ID: <4be4378630c93ae32a4db8bc3e0871c7b15150a6.1628661185.git.objelf@gmail.com> (raw)
From: Sean Wang <sean.wang@mediatek.com>
According to the firmware usage, OFDM rates should fill out bit 6 - 13
while CCK rates should fill out bit 0 - 3 in legacy field of RA info to
make the rate adaption runs propertly. Otherwise, a unicast frame might be
picking up the unsupported rate to send out.
Fixes: 1c099ab44727 ("mt76: mt7921: add MCU support")
Reported-by: Joshua Emele <jemele@chromium.org>
Co-developed-by: YN Chen <YN.Chen@mediatek.com>
Signed-off-by: YN Chen <YN.Chen@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
---
drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.c | 11 ++++++++++-
drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.h | 2 ++
2 files changed, 12 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.c b/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.c
index a2555dc0f003..27e45f4fc05f 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.c
+++ b/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.c
@@ -719,6 +719,7 @@ void mt76_connac_mcu_sta_tlv(struct mt76_phy *mphy, struct sk_buff *skb,
struct sta_rec_state *state;
struct sta_rec_phy *phy;
struct tlv *tlv;
+ u16 supp_rates;
/* starec ht */
if (sta->ht_cap.ht_supported) {
@@ -767,7 +768,15 @@ void mt76_connac_mcu_sta_tlv(struct mt76_phy *mphy, struct sk_buff *skb,
tlv = mt76_connac_mcu_add_tlv(skb, STA_REC_RA, sizeof(*ra_info));
ra_info = (struct sta_rec_ra_info *)tlv;
- ra_info->legacy = cpu_to_le16((u16)sta->supp_rates[band]);
+
+ supp_rates = sta->supp_rates[band];
+ if (band == NL80211_BAND_2GHZ)
+ supp_rates = FIELD_PREP(RA_LEGACY_OFDM, supp_rates >> 4) |
+ FIELD_PREP(RA_LEGACY_CCK, supp_rates & 0xf);
+ else
+ supp_rates = FIELD_PREP(RA_LEGACY_OFDM, supp_rates);
+
+ ra_info->legacy = cpu_to_le16(supp_rates);
if (sta->ht_cap.ht_supported)
memcpy(ra_info->rx_mcs_bitmask, sta->ht_cap.mcs.rx_mask,
diff --git a/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.h b/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.h
index ab77289c0541..9dfdf7625844 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.h
+++ b/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.h
@@ -124,6 +124,8 @@ struct sta_rec_state {
u8 rsv[1];
} __packed;
+#define RA_LEGACY_OFDM GENMASK(13, 6)
+#define RA_LEGACY_CCK GENMASK(3, 0)
#define HT_MCS_MASK_NUM 10
struct sta_rec_ra_info {
__le16 tag;
--
2.25.1
reply other threads:[~2021-08-11 5:58 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4be4378630c93ae32a4db8bc3e0871c7b15150a6.1628661185.git.objelf@gmail.com \
--to=sean.wang@mediatek.com \
--cc=Deren.Wu@mediatek.com \
--cc=Eric-SY.Chang@mediatek.com \
--cc=Eric.Liang@mediatek.com \
--cc=Leon.Yen@mediatek.com \
--cc=Soul.Huang@mediatek.com \
--cc=Stella.Chang@mediatek.com \
--cc=YN.Chen@mediatek.com \
--cc=ch.yeh@mediatek.com \
--cc=jemele@google.com \
--cc=km.lin@mediatek.com \
--cc=linux-mediatek@lists.infradead.org \
--cc=linux-wireless@vger.kernel.org \
--cc=lorenzo.bianconi@redhat.com \
--cc=nbd@nbd.name \
--cc=posh.sun@mediatek.com \
--cc=robin.chiu@mediatek.com \
--cc=yenlinlai@google.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).