* [PATCH] mt76: mt7921: fix firmware usage of RA info using legacy rates
@ 2021-08-11 5:58 sean.wang
0 siblings, 0 replies; only message in thread
From: sean.wang @ 2021-08-11 5:58 UTC (permalink / raw)
To: nbd, lorenzo.bianconi
Cc: sean.wang, Soul.Huang, YN.Chen, Leon.Yen, Eric-SY.Chang,
Deren.Wu, km.lin, robin.chiu, ch.yeh, posh.sun, Eric.Liang,
Stella.Chang, jemele, yenlinlai, linux-wireless, linux-mediatek
From: Sean Wang <sean.wang@mediatek.com>
According to the firmware usage, OFDM rates should fill out bit 6 - 13
while CCK rates should fill out bit 0 - 3 in legacy field of RA info to
make the rate adaption runs propertly. Otherwise, a unicast frame might be
picking up the unsupported rate to send out.
Fixes: 1c099ab44727 ("mt76: mt7921: add MCU support")
Reported-by: Joshua Emele <jemele@chromium.org>
Co-developed-by: YN Chen <YN.Chen@mediatek.com>
Signed-off-by: YN Chen <YN.Chen@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
---
drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.c | 11 ++++++++++-
drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.h | 2 ++
2 files changed, 12 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.c b/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.c
index a2555dc0f003..27e45f4fc05f 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.c
+++ b/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.c
@@ -719,6 +719,7 @@ void mt76_connac_mcu_sta_tlv(struct mt76_phy *mphy, struct sk_buff *skb,
struct sta_rec_state *state;
struct sta_rec_phy *phy;
struct tlv *tlv;
+ u16 supp_rates;
/* starec ht */
if (sta->ht_cap.ht_supported) {
@@ -767,7 +768,15 @@ void mt76_connac_mcu_sta_tlv(struct mt76_phy *mphy, struct sk_buff *skb,
tlv = mt76_connac_mcu_add_tlv(skb, STA_REC_RA, sizeof(*ra_info));
ra_info = (struct sta_rec_ra_info *)tlv;
- ra_info->legacy = cpu_to_le16((u16)sta->supp_rates[band]);
+
+ supp_rates = sta->supp_rates[band];
+ if (band == NL80211_BAND_2GHZ)
+ supp_rates = FIELD_PREP(RA_LEGACY_OFDM, supp_rates >> 4) |
+ FIELD_PREP(RA_LEGACY_CCK, supp_rates & 0xf);
+ else
+ supp_rates = FIELD_PREP(RA_LEGACY_OFDM, supp_rates);
+
+ ra_info->legacy = cpu_to_le16(supp_rates);
if (sta->ht_cap.ht_supported)
memcpy(ra_info->rx_mcs_bitmask, sta->ht_cap.mcs.rx_mask,
diff --git a/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.h b/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.h
index ab77289c0541..9dfdf7625844 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.h
+++ b/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.h
@@ -124,6 +124,8 @@ struct sta_rec_state {
u8 rsv[1];
} __packed;
+#define RA_LEGACY_OFDM GENMASK(13, 6)
+#define RA_LEGACY_CCK GENMASK(3, 0)
#define HT_MCS_MASK_NUM 10
struct sta_rec_ra_info {
__le16 tag;
--
2.25.1
^ permalink raw reply related [flat|nested] only message in thread
only message in thread, other threads:[~2021-08-11 5:58 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-08-11 5:58 [PATCH] mt76: mt7921: fix firmware usage of RA info using legacy rates sean.wang
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).