* [RFC v2] ath9k: allow up to 8 access point vifs on DFS channels
@ 2015-05-19 9:47 Jean-Pierre TOSONI
0 siblings, 0 replies; only message in thread
From: Jean-Pierre TOSONI @ 2015-05-19 9:47 UTC (permalink / raw)
To: linux-wireless
Allow the combination of 8 (AP + mesh) interfaces on radar channels
Tested with hostapd, 2 and 8 BSSIDs, 1 or 2 DFS channels, BW 20 MHz
TODO: test AP+mesh combination
TODO: test 40 MHz BW
---
This patch was done with quilt on Openwrt against compat-wireless
2014-11-04
--- a/drivers/net/wireless/ath/ath9k/init.c
+++ b/drivers/net/wireless/ath/ath9k/init.c
@@ -723,6 +723,14 @@ static const struct ieee80211_iface_limi
BIT(NL80211_IFTYPE_ADHOC) },
};
+static const struct ieee80211_iface_limit if_dfs_limits_mvap[] = {
+ { .max = 8, .types =
+#ifdef CONFIG_MAC80211_MESH
+ BIT(NL80211_IFTYPE_MESH_POINT) |
+#endif
+ BIT(NL80211_IFTYPE_AP) },
+};
+
static const struct ieee80211_iface_combination if_comb[] = {
{
.limits = if_limits,
@@ -746,6 +754,16 @@ static const struct ieee80211_iface_comb
.num_different_channels = 1,
.beacon_int_infra_match = true,
.radar_detect_widths = BIT(NL80211_CHAN_WIDTH_20_NOHT)
|
+ BIT(NL80211_CHAN_WIDTH_20) |
+ BIT(NL80211_CHAN_WIDTH_40),
+ },
+ {
+ .limits = if_dfs_limits_mvap,
+ .n_limits = ARRAY_SIZE(if_dfs_limits_mvap),
+ .max_interfaces = 8,
+ .num_different_channels = 1,
+ .beacon_int_infra_match = true,
+ .radar_detect_widths = BIT(NL80211_CHAN_WIDTH_20_NOHT)
|
BIT(NL80211_CHAN_WIDTH_20) |
BIT(NL80211_CHAN_WIDTH_40),
}
--
quilt
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2015-05-19 9:47 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2015-05-19 9:47 [RFC v2] ath9k: allow up to 8 access point vifs on DFS channels Jean-Pierre TOSONI
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).