* [PATCH 13/18] wl1251: rework configure_filter() callback
@ 2011-01-30 17:54 David Gnedt
2011-01-30 19:11 ` David Gnedt
0 siblings, 1 reply; 3+ messages in thread
From: David Gnedt @ 2011-01-30 17:54 UTC (permalink / raw)
To: John W. Linville
Cc: linux-wireless, Kalle Valo, Grazvydas Ignotas,
Denis 'GNUtoo' Carikli
The configure_filter() callback function no longer needs to be atomic.
Remove the scheduled work structure and call firmware functions directly.
Add filter support for monitor mode and fix flag mapping for
FIF_PROMISC_IN_BSS and FIF_OTHER_BSS.
Fix BSSID filter config for changed BSSID handling since commit 9cef8737
"mac80211: fix managed mode BSSID handling" and remove workaround.
Signed-off-by: David Gnedt <david.gnedt@davizone.at>
---
drivers/net/wireless/wl1251/cmd.c | 9 ----
drivers/net/wireless/wl1251/main.c | 88 ++++++++++++++++++----------------
drivers/net/wireless/wl1251/wl1251.h | 5 +--
3 files changed, 48 insertions(+), 54 deletions(-)
diff --git a/drivers/net/wireless/wl1251/cmd.c b/drivers/net/wireless/wl1251/cmd.c
index 886da13..e70ec79 100644
--- a/drivers/net/wireless/wl1251/cmd.c
+++ b/drivers/net/wireless/wl1251/cmd.c
@@ -300,15 +300,6 @@ int wl1251_cmd_join(struct wl1251 *wl, u8 bss_type, u8 channel,
join->rx_config_options = wl->rx_config;
join->rx_filter_options = wl->rx_filter;
- /*
- * FIXME: disable temporarily all filters because after commit
- * 9cef8737 "mac80211: fix managed mode BSSID handling" broke
- * association. The filter logic needs to be implemented properly
- * and once that is done, this hack can be removed.
- */
- join->rx_config_options = 0;
- join->rx_filter_options = WL1251_DEFAULT_RX_FILTER;
-
join->basic_rate_set = RATE_MASK_1MBPS | RATE_MASK_2MBPS |
RATE_MASK_5_5MBPS | RATE_MASK_11MBPS;
diff --git a/drivers/net/wireless/wl1251/main.c
b/drivers/net/wireless/wl1251/main.c
index 5078705..cc49e2b 100644
--- a/drivers/net/wireless/wl1251/main.c
+++ b/drivers/net/wireless/wl1251/main.c
@@ -349,33 +349,6 @@ out:
return ret;
}
-static void wl1251_filter_work(struct work_struct *work)
-{
- struct wl1251 *wl =
- container_of(work, struct wl1251, filter_work);
- int ret;
-
- mutex_lock(&wl->mutex);
-
- if (wl->state == WL1251_STATE_OFF)
- goto out;
-
- ret = wl1251_ps_elp_wakeup(wl);
- if (ret < 0)
- goto out;
-
- ret = wl1251_join(wl, wl->bss_type, wl->channel, wl->beacon_int,
- wl->dtim_period);
- if (ret < 0)
- goto out_sleep;
-
-out_sleep:
- wl1251_ps_elp_sleep(wl);
-
-out:
- mutex_unlock(&wl->mutex);
-}
-
static int wl1251_op_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
{
struct wl1251 *wl = hw->priv;
@@ -481,7 +454,6 @@ static void wl1251_op_stop(struct ieee80211_hw *hw)
cancel_work_sync(&wl->irq_work);
cancel_work_sync(&wl->tx_work);
- cancel_work_sync(&wl->filter_work);
mutex_lock(&wl->mutex);
@@ -622,6 +594,16 @@ static int wl1251_op_config(struct ieee80211_hw *hw, u32
changed)
ret = wl1251_acx_feature_cfg(wl, mode);
if (ret < 0)
goto out_sleep;
+
+ if (wl->monitor_present)
+ wl->rx_config |= CFG_RX_ALL_GOOD;
+ else
+ wl->rx_config &= ~CFG_RX_ALL_GOOD;
+
+ /* update filters immediately */
+ ret = wl1251_acx_rx_config(wl, wl->rx_config, wl->rx_filter);
+ if (ret < 0)
+ goto out_sleep;
}
if (channel != wl->channel) {
@@ -691,6 +673,7 @@ static void wl1251_op_configure_filter(struct ieee80211_hw *hw,
unsigned int *total,u64 multicast)
{
struct wl1251 *wl = hw->priv;
+ int ret;
wl1251_debug(DEBUG_MAC80211, "mac80211 configure filter");
@@ -701,15 +684,22 @@ static void wl1251_op_configure_filter(struct
ieee80211_hw *hw,
/* no filters which we support changed */
return;
- /* FIXME: wl->rx_config and wl->rx_filter are not protected */
+ mutex_lock(&wl->mutex);
+
+ if (wl->state == WL1251_STATE_OFF)
+ goto out;
+
+ ret = wl1251_ps_elp_wakeup(wl);
+ if (ret < 0)
+ goto out;
wl->rx_config = WL1251_DEFAULT_RX_CONFIG;
wl->rx_filter = WL1251_DEFAULT_RX_FILTER;
- if (*total & FIF_PROMISC_IN_BSS) {
+ if (!is_zero_ether_addr(wl->bssid))
wl->rx_config |= CFG_BSSID_FILTER_EN;
- wl->rx_config |= CFG_RX_ALL_GOOD;
- }
+ if (*total & FIF_PROMISC_IN_BSS)
+ wl->rx_config &= ~CFG_UNI_FILTER_EN;
if (*total & FIF_ALLMULTI)
/*
* CFG_MC_FILTER_EN in rx_config needs to be 0 to receive
@@ -724,15 +714,27 @@ static void wl1251_op_configure_filter(struct ieee80211_hw
*hw,
}
if (*total & FIF_CONTROL)
wl->rx_filter |= CFG_RX_CTL_EN;
- if (*total & FIF_OTHER_BSS)
- wl->rx_filter &= ~CFG_BSSID_FILTER_EN;
+ if (*total & FIF_OTHER_BSS) {
+ wl->rx_config &= ~CFG_BSSID_FILTER_EN;
+ wl->rx_config &= ~CFG_SSID_FILTER_EN;
+ }
+ if (wl->monitor_present)
+ wl->rx_config |= CFG_RX_ALL_GOOD;
- /*
- * FIXME: workqueues need to be properly cancelled on stop(), for
- * now let's just disable changing the filter settings. They will
- * be updated any on config().
- */
- /* schedule_work(&wl->filter_work); */
+ wl1251_debug(DEBUG_MAC80211, "mac80211 filter total 0x%02x"
+ " changed 0x%02x rx_config 0x%02x rx_filter 0x%02x",
+ *total, changed, wl->rx_config, wl->rx_filter);
+
+ /* apply configured filters */
+ ret = wl1251_acx_rx_config(wl, wl->rx_config, wl->rx_filter);
+ if (ret < 0)
+ goto out_sleep;
+
+out_sleep:
+ wl1251_ps_elp_sleep(wl);
+
+out:
+ mutex_unlock(&wl->mutex);
}
/* HW encryption */
@@ -999,6 +1001,11 @@ static void wl1251_op_bss_info_changed(struct ieee80211_hw
*hw,
if (changed & BSS_CHANGED_BSSID) {
memcpy(wl->bssid, bss_conf->bssid, ETH_ALEN);
+ if (is_zero_ether_addr(wl->bssid))
+ wl->rx_config &= ~CFG_BSSID_FILTER_EN;
+ else
+ wl->rx_config |= CFG_BSSID_FILTER_EN;
+
skb = ieee80211_nullfunc_get(wl->hw, wl->vif);
if (!skb)
goto out_sleep;
@@ -1513,7 +1520,6 @@ struct ieee80211_hw *wl1251_alloc_hw(void)
skb_queue_head_init(&wl->tx_queue);
- INIT_WORK(&wl->filter_work, wl1251_filter_work);
INIT_DELAYED_WORK(&wl->elp_work, wl1251_elp_work);
wl->channel = WL1251_DEFAULT_CHANNEL;
wl->monitor_present = false;
diff --git a/drivers/net/wireless/wl1251/wl1251.h
b/drivers/net/wireless/wl1251/wl1251.h
index 875c1bf..1f9579c 100644
--- a/drivers/net/wireless/wl1251/wl1251.h
+++ b/drivers/net/wireless/wl1251/wl1251.h
@@ -92,13 +92,11 @@ enum {
true); \
} while (0)
-#define WL1251_DEFAULT_RX_CONFIG (CFG_UNI_FILTER_EN | \
- CFG_BSSID_FILTER_EN)
+#define WL1251_DEFAULT_RX_CONFIG (CFG_UNI_FILTER_EN)
#define WL1251_DEFAULT_RX_FILTER (CFG_RX_PRSP_EN | \
CFG_RX_MGMT_EN | \
CFG_RX_DATA_EN | \
- CFG_RX_CTL_EN | \
CFG_RX_BCN_EN | \
CFG_RX_AUTH_EN | \
CFG_RX_ASSOC_EN)
@@ -316,7 +314,6 @@ struct wl1251 {
bool tx_queue_stopped;
struct work_struct tx_work;
- struct work_struct filter_work;
/* Pending TX frames */
struct sk_buff *tx_frames[16];
--
1.7.0.4
^ permalink raw reply related [flat|nested] 3+ messages in thread
* [PATCH 13/18] wl1251: rework configure_filter() callback
2011-01-30 17:54 [PATCH 13/18] wl1251: rework configure_filter() callback David Gnedt
@ 2011-01-30 19:11 ` David Gnedt
2011-02-08 9:56 ` Kalle Valo
0 siblings, 1 reply; 3+ messages in thread
From: David Gnedt @ 2011-01-30 19:11 UTC (permalink / raw)
To: John W. Linville
Cc: linux-wireless, Kalle Valo, Grazvydas Ignotas,
Denis 'GNUtoo' Carikli
The configure_filter() callback function no longer needs to be atomic.
Remove the scheduled work structure and call firmware functions directly.
Add filter support for monitor mode and fix flag mapping for
FIF_PROMISC_IN_BSS and FIF_OTHER_BSS.
Fix BSSID filter config for changed BSSID handling since commit 9cef8737
"mac80211: fix managed mode BSSID handling" and remove workaround.
Signed-off-by: David Gnedt <david.gnedt@davizone.at>
---
Sorry for the partly broken patches, I thought I configured my client the
right way. I tried to stop the mails at my mailserver, but it was mostly
already too late.
---
drivers/net/wireless/wl1251/cmd.c | 9 ----
drivers/net/wireless/wl1251/main.c | 88 ++++++++++++++++++----------------
drivers/net/wireless/wl1251/wl1251.h | 5 +--
3 files changed, 48 insertions(+), 54 deletions(-)
diff --git a/drivers/net/wireless/wl1251/cmd.c b/drivers/net/wireless/wl1251/cmd.c
index 886da13..e70ec79 100644
--- a/drivers/net/wireless/wl1251/cmd.c
+++ b/drivers/net/wireless/wl1251/cmd.c
@@ -300,15 +300,6 @@ int wl1251_cmd_join(struct wl1251 *wl, u8 bss_type, u8 channel,
join->rx_config_options = wl->rx_config;
join->rx_filter_options = wl->rx_filter;
- /*
- * FIXME: disable temporarily all filters because after commit
- * 9cef8737 "mac80211: fix managed mode BSSID handling" broke
- * association. The filter logic needs to be implemented properly
- * and once that is done, this hack can be removed.
- */
- join->rx_config_options = 0;
- join->rx_filter_options = WL1251_DEFAULT_RX_FILTER;
-
join->basic_rate_set = RATE_MASK_1MBPS | RATE_MASK_2MBPS |
RATE_MASK_5_5MBPS | RATE_MASK_11MBPS;
diff --git a/drivers/net/wireless/wl1251/main.c b/drivers/net/wireless/wl1251/main.c
index 5078705..cc49e2b 100644
--- a/drivers/net/wireless/wl1251/main.c
+++ b/drivers/net/wireless/wl1251/main.c
@@ -349,33 +349,6 @@ out:
return ret;
}
-static void wl1251_filter_work(struct work_struct *work)
-{
- struct wl1251 *wl =
- container_of(work, struct wl1251, filter_work);
- int ret;
-
- mutex_lock(&wl->mutex);
-
- if (wl->state == WL1251_STATE_OFF)
- goto out;
-
- ret = wl1251_ps_elp_wakeup(wl);
- if (ret < 0)
- goto out;
-
- ret = wl1251_join(wl, wl->bss_type, wl->channel, wl->beacon_int,
- wl->dtim_period);
- if (ret < 0)
- goto out_sleep;
-
-out_sleep:
- wl1251_ps_elp_sleep(wl);
-
-out:
- mutex_unlock(&wl->mutex);
-}
-
static int wl1251_op_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
{
struct wl1251 *wl = hw->priv;
@@ -481,7 +454,6 @@ static void wl1251_op_stop(struct ieee80211_hw *hw)
cancel_work_sync(&wl->irq_work);
cancel_work_sync(&wl->tx_work);
- cancel_work_sync(&wl->filter_work);
mutex_lock(&wl->mutex);
@@ -622,6 +594,16 @@ static int wl1251_op_config(struct ieee80211_hw *hw, u32 changed)
ret = wl1251_acx_feature_cfg(wl, mode);
if (ret < 0)
goto out_sleep;
+
+ if (wl->monitor_present)
+ wl->rx_config |= CFG_RX_ALL_GOOD;
+ else
+ wl->rx_config &= ~CFG_RX_ALL_GOOD;
+
+ /* update filters immediately */
+ ret = wl1251_acx_rx_config(wl, wl->rx_config, wl->rx_filter);
+ if (ret < 0)
+ goto out_sleep;
}
if (channel != wl->channel) {
@@ -691,6 +673,7 @@ static void wl1251_op_configure_filter(struct ieee80211_hw *hw,
unsigned int *total,u64 multicast)
{
struct wl1251 *wl = hw->priv;
+ int ret;
wl1251_debug(DEBUG_MAC80211, "mac80211 configure filter");
@@ -701,15 +684,22 @@ static void wl1251_op_configure_filter(struct ieee80211_hw *hw,
/* no filters which we support changed */
return;
- /* FIXME: wl->rx_config and wl->rx_filter are not protected */
+ mutex_lock(&wl->mutex);
+
+ if (wl->state == WL1251_STATE_OFF)
+ goto out;
+
+ ret = wl1251_ps_elp_wakeup(wl);
+ if (ret < 0)
+ goto out;
wl->rx_config = WL1251_DEFAULT_RX_CONFIG;
wl->rx_filter = WL1251_DEFAULT_RX_FILTER;
- if (*total & FIF_PROMISC_IN_BSS) {
+ if (!is_zero_ether_addr(wl->bssid))
wl->rx_config |= CFG_BSSID_FILTER_EN;
- wl->rx_config |= CFG_RX_ALL_GOOD;
- }
+ if (*total & FIF_PROMISC_IN_BSS)
+ wl->rx_config &= ~CFG_UNI_FILTER_EN;
if (*total & FIF_ALLMULTI)
/*
* CFG_MC_FILTER_EN in rx_config needs to be 0 to receive
@@ -724,15 +714,27 @@ static void wl1251_op_configure_filter(struct ieee80211_hw *hw,
}
if (*total & FIF_CONTROL)
wl->rx_filter |= CFG_RX_CTL_EN;
- if (*total & FIF_OTHER_BSS)
- wl->rx_filter &= ~CFG_BSSID_FILTER_EN;
+ if (*total & FIF_OTHER_BSS) {
+ wl->rx_config &= ~CFG_BSSID_FILTER_EN;
+ wl->rx_config &= ~CFG_SSID_FILTER_EN;
+ }
+ if (wl->monitor_present)
+ wl->rx_config |= CFG_RX_ALL_GOOD;
- /*
- * FIXME: workqueues need to be properly cancelled on stop(), for
- * now let's just disable changing the filter settings. They will
- * be updated any on config().
- */
- /* schedule_work(&wl->filter_work); */
+ wl1251_debug(DEBUG_MAC80211, "mac80211 filter total 0x%02x"
+ " changed 0x%02x rx_config 0x%02x rx_filter 0x%02x",
+ *total, changed, wl->rx_config, wl->rx_filter);
+
+ /* apply configured filters */
+ ret = wl1251_acx_rx_config(wl, wl->rx_config, wl->rx_filter);
+ if (ret < 0)
+ goto out_sleep;
+
+out_sleep:
+ wl1251_ps_elp_sleep(wl);
+
+out:
+ mutex_unlock(&wl->mutex);
}
/* HW encryption */
@@ -999,6 +1001,11 @@ static void wl1251_op_bss_info_changed(struct ieee80211_hw *hw,
if (changed & BSS_CHANGED_BSSID) {
memcpy(wl->bssid, bss_conf->bssid, ETH_ALEN);
+ if (is_zero_ether_addr(wl->bssid))
+ wl->rx_config &= ~CFG_BSSID_FILTER_EN;
+ else
+ wl->rx_config |= CFG_BSSID_FILTER_EN;
+
skb = ieee80211_nullfunc_get(wl->hw, wl->vif);
if (!skb)
goto out_sleep;
@@ -1513,7 +1520,6 @@ struct ieee80211_hw *wl1251_alloc_hw(void)
skb_queue_head_init(&wl->tx_queue);
- INIT_WORK(&wl->filter_work, wl1251_filter_work);
INIT_DELAYED_WORK(&wl->elp_work, wl1251_elp_work);
wl->channel = WL1251_DEFAULT_CHANNEL;
wl->monitor_present = false;
diff --git a/drivers/net/wireless/wl1251/wl1251.h b/drivers/net/wireless/wl1251/wl1251.h
index 875c1bf..1f9579c 100644
--- a/drivers/net/wireless/wl1251/wl1251.h
+++ b/drivers/net/wireless/wl1251/wl1251.h
@@ -92,13 +92,11 @@ enum {
true); \
} while (0)
-#define WL1251_DEFAULT_RX_CONFIG (CFG_UNI_FILTER_EN | \
- CFG_BSSID_FILTER_EN)
+#define WL1251_DEFAULT_RX_CONFIG (CFG_UNI_FILTER_EN)
#define WL1251_DEFAULT_RX_FILTER (CFG_RX_PRSP_EN | \
CFG_RX_MGMT_EN | \
CFG_RX_DATA_EN | \
- CFG_RX_CTL_EN | \
CFG_RX_BCN_EN | \
CFG_RX_AUTH_EN | \
CFG_RX_ASSOC_EN)
@@ -316,7 +314,6 @@ struct wl1251 {
bool tx_queue_stopped;
struct work_struct tx_work;
- struct work_struct filter_work;
/* Pending TX frames */
struct sk_buff *tx_frames[16];
--
1.7.0.4
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH 13/18] wl1251: rework configure_filter() callback
2011-01-30 19:11 ` David Gnedt
@ 2011-02-08 9:56 ` Kalle Valo
0 siblings, 0 replies; 3+ messages in thread
From: Kalle Valo @ 2011-02-08 9:56 UTC (permalink / raw)
To: David Gnedt
Cc: John W. Linville, linux-wireless, Grazvydas Ignotas,
Denis 'GNUtoo' Carikli
David Gnedt <david.gnedt@davizone.at> writes:
> The configure_filter() callback function no longer needs to be atomic.
> Remove the scheduled work structure and call firmware functions directly.
> Add filter support for monitor mode and fix flag mapping for
> FIF_PROMISC_IN_BSS and FIF_OTHER_BSS.
> Fix BSSID filter config for changed BSSID handling since commit 9cef8737
> "mac80211: fix managed mode BSSID handling" and remove workaround.
Thanks, looks good to me.
> Signed-off-by: David Gnedt <david.gnedt@davizone.at>
Acked-by: Kalle Valo <kvalo@adurom.com>
--
Kalle Valo
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2011-02-08 9:56 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2011-01-30 17:54 [PATCH 13/18] wl1251: rework configure_filter() callback David Gnedt
2011-01-30 19:11 ` David Gnedt
2011-02-08 9:56 ` Kalle Valo
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).