* [PATCH v2] mt76: mt7921: introduce 160 MHz channel bandwidth support
@ 2021-11-08 14:41 Deren Wu
2021-11-12 19:12 ` Ryder Lee
0 siblings, 1 reply; 6+ messages in thread
From: Deren Wu @ 2021-11-08 14:41 UTC (permalink / raw)
To: Felix Fietkau, Lorenzo Bianconi
Cc: Sean Wang, Soul Huang, YN Chen, Leon Yen, Eric-SY Chang,
Deren Wu, KM Lin, Robin Chiu, CH Yeh, Posh Sun, Eric Liang,
Stella Chang, Evelyn Tsai, Ryder Lee, Shayne Chen,
linux-wireless, linux-mediatek, Deren Wu
From: Deren Wu <deren.wu@mediatek.com>
Introduce the basic configuration for chips with BW160 capability
Signed-off-by: Deren Wu <deren.wu@mediatek.com>
---
drivers/net/wireless/mediatek/mt76/mt76.h | 1 +
drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.c | 1 +
drivers/net/wireless/mediatek/mt76/mt7921/init.c | 4 ++++
drivers/net/wireless/mediatek/mt76/mt7921/main.c | 12 ++++++++++++
4 files changed, 18 insertions(+)
diff --git a/drivers/net/wireless/mediatek/mt76/mt76.h b/drivers/net/wireless/mediatek/mt76/mt76.h
index e2da720a91b6..babca8086027 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76.h
+++ b/drivers/net/wireless/mediatek/mt76/mt76.h
@@ -346,6 +346,7 @@ struct mt76_hw_cap {
bool has_2ghz;
bool has_5ghz;
bool has_6ghz;
+ bool has_bw160;
};
#define MT_DRV_TXWI_NO_FREE BIT(0)
diff --git a/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.c b/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.c
index 26b4b875dcc0..3b42e1e8e970 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.c
+++ b/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.c
@@ -1775,6 +1775,7 @@ static void mt76_connac_mcu_parse_phy_cap(struct mt76_dev *dev,
dev->phy.chainmask = dev->phy.antenna_mask;
dev->phy.cap.has_2ghz = cap->hw_path & BIT(WF0_24G);
dev->phy.cap.has_5ghz = cap->hw_path & BIT(WF0_5G);
+ dev->phy.cap.has_bw160 = cap->max_bw == IEEE80211_STA_RX_BW_160;
}
int mt76_connac_mcu_get_nic_capability(struct mt76_phy *phy)
diff --git a/drivers/net/wireless/mediatek/mt76/mt7921/init.c b/drivers/net/wireless/mediatek/mt76/mt7921/init.c
index 210998f086ab..30c0246fba3a 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7921/init.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7921/init.c
@@ -264,6 +264,10 @@ int mt7921_register_device(struct mt7921_dev *dev)
IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE |
IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE |
(3 << IEEE80211_VHT_CAP_BEAMFORMEE_STS_SHIFT);
+ if (dev->mt76.phy.cap.has_bw160)
+ dev->mphy.sband_5g.sband.vht_cap.cap |=
+ IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ |
+ IEEE80211_VHT_CAP_SHORT_GI_160;
dev->mphy.hw->wiphy->available_antennas_rx = dev->mphy.chainmask;
dev->mphy.hw->wiphy->available_antennas_tx = dev->mphy.chainmask;
diff --git a/drivers/net/wireless/mediatek/mt76/mt7921/main.c b/drivers/net/wireless/mediatek/mt76/mt7921/main.c
index 633c6d2a57ac..af8c675f909f 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7921/main.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7921/main.c
@@ -128,11 +128,23 @@ mt7921_init_he_caps(struct mt7921_phy *phy, enum nl80211_band band,
IEEE80211_HE_PHY_CAP9_RX_1024_QAM_LESS_THAN_242_TONE_RU |
IEEE80211_HE_PHY_CAP9_RX_FULL_BW_SU_USING_MU_WITH_COMP_SIGB |
IEEE80211_HE_PHY_CAP9_RX_FULL_BW_SU_USING_MU_WITH_NON_COMP_SIGB;
+
+ if (phy->mt76->cap.has_bw160) {
+ he_cap_elem->phy_cap_info[0] |=
+ IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_160MHZ_IN_5G;
+ he_cap_elem->phy_cap_info[8] |=
+ IEEE80211_HE_PHY_CAP8_20MHZ_IN_160MHZ_HE_PPDU |
+ IEEE80211_HE_PHY_CAP8_80MHZ_IN_160MHZ_HE_PPDU;
+ }
break;
}
he_mcs->rx_mcs_80 = cpu_to_le16(mcs_map);
he_mcs->tx_mcs_80 = cpu_to_le16(mcs_map);
+ if (phy->mt76->cap.has_bw160) {
+ he_mcs->rx_mcs_160 = cpu_to_le16(mcs_map);
+ he_mcs->tx_mcs_160 = cpu_to_le16(mcs_map);
+ }
memset(he_cap->ppe_thres, 0, sizeof(he_cap->ppe_thres));
if (he_cap_elem->phy_cap_info[6] &
--
2.18.0
^ permalink raw reply related [flat|nested] 6+ messages in thread* Re: [PATCH v2] mt76: mt7921: introduce 160 MHz channel bandwidth support
2021-11-08 14:41 [PATCH v2] mt76: mt7921: introduce 160 MHz channel bandwidth support Deren Wu
@ 2021-11-12 19:12 ` Ryder Lee
2021-11-13 3:39 ` Deren Wu
0 siblings, 1 reply; 6+ messages in thread
From: Ryder Lee @ 2021-11-12 19:12 UTC (permalink / raw)
To: Deren Wu, Felix Fietkau, Lorenzo Bianconi
Cc: Sean Wang, Soul Huang, YN Chen, Leon Yen, Eric-SY Chang, KM Lin,
Robin Chiu, CH Yeh, Posh Sun, Eric Liang, Stella Chang,
Evelyn Tsai, Shayne Chen, linux-wireless, linux-mediatek
On Mon, 2021-11-08 at 22:41 +0800, Deren Wu wrote:
> From: Deren Wu <deren.wu@mediatek.com>
>
> Introduce the basic configuration for chips with BW160 capability
>
> Signed-off-by: Deren Wu <deren.wu@mediatek.com>
> ---
> drivers/net/wireless/mediatek/mt76/mt76.h | 1 +
> drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.c | 1 +
> drivers/net/wireless/mediatek/mt76/mt7921/init.c | 4 ++++
> drivers/net/wireless/mediatek/mt76/mt7921/main.c | 12
> ++++++++++++
> 4 files changed, 18 insertions(+)
>
> diff --git a/drivers/net/wireless/mediatek/mt76/mt76.h
> b/drivers/net/wireless/mediatek/mt76/mt76.h
> index e2da720a91b6..babca8086027 100644
> --- a/drivers/net/wireless/mediatek/mt76/mt76.h
> +++ b/drivers/net/wireless/mediatek/mt76/mt76.h
> @@ -346,6 +346,7 @@ struct mt76_hw_cap {
> bool has_2ghz;
> bool has_5ghz;
> bool has_6ghz;
> + bool has_bw160;
> };
>
> #define MT_DRV_TXWI_NO_FREE BIT(0)
> diff --git a/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.c
> b/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.c
> index 26b4b875dcc0..3b42e1e8e970 100644
> --- a/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.c
> +++ b/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.c
> @@ -1775,6 +1775,7 @@ static void
> mt76_connac_mcu_parse_phy_cap(struct mt76_dev *dev,
> dev->phy.chainmask = dev->phy.antenna_mask;
> dev->phy.cap.has_2ghz = cap->hw_path & BIT(WF0_24G);
> dev->phy.cap.has_5ghz = cap->hw_path & BIT(WF0_5G);
> + dev->phy.cap.has_bw160 = cap->max_bw ==
> IEEE80211_STA_RX_BW_160;
> }
>
> int mt76_connac_mcu_get_nic_capability(struct mt76_phy *phy)
> diff --git a/drivers/net/wireless/mediatek/mt76/mt7921/init.c
> b/drivers/net/wireless/mediatek/mt76/mt7921/init.c
> index 210998f086ab..30c0246fba3a 100644
> --- a/drivers/net/wireless/mediatek/mt76/mt7921/init.c
> +++ b/drivers/net/wireless/mediatek/mt76/mt7921/init.c
> @@ -264,6 +264,10 @@ int mt7921_register_device(struct mt7921_dev
> *dev)
> IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE |
> IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE |
> (3 << IEEE80211_VHT_CAP_BEAMFORMEE_STS_SHIFT);
> + if (dev->mt76.phy.cap.has_bw160)
> + dev->mphy.sband_5g.sband.vht_cap.cap |=
> + IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ |
> + IEEE80211_VHT_CAP_SHORT_GI_160;
>
> dev->mphy.hw->wiphy->available_antennas_rx = dev-
> >mphy.chainmask;
> dev->mphy.hw->wiphy->available_antennas_tx = dev-
> >mphy.chainmask;
> diff --git a/drivers/net/wireless/mediatek/mt76/mt7921/main.c
> b/drivers/net/wireless/mediatek/mt76/mt7921/main.c
> index 633c6d2a57ac..af8c675f909f 100644
> --- a/drivers/net/wireless/mediatek/mt76/mt7921/main.c
> +++ b/drivers/net/wireless/mediatek/mt76/mt7921/main.c
> @@ -128,11 +128,23 @@ mt7921_init_he_caps(struct mt7921_phy *phy,
> enum nl80211_band band,
> IEEE80211_HE_PHY_CAP9_RX_1024_QAM_LESS_
> THAN_242_TONE_RU |
> IEEE80211_HE_PHY_CAP9_RX_FULL_BW_SU_USI
> NG_MU_WITH_COMP_SIGB |
> IEEE80211_HE_PHY_CAP9_RX_FULL_BW_SU_USI
> NG_MU_WITH_NON_COMP_SIGB;
> +
> + if (phy->mt76->cap.has_bw160) {
> + he_cap_elem->phy_cap_info[0] |=
> + IEEE80211_HE_PHY_CAP0_CHANNEL_W
> IDTH_SET_160MHZ_IN_5G;
> + he_cap_elem->phy_cap_info[8] |=
> + IEEE80211_HE_PHY_CAP8_20MHZ_IN_
> 160MHZ_HE_PPDU |
> + IEEE80211_HE_PHY_CAP8_80MHZ_IN_
> 160MHZ_HE_PPDU;
> + }
> break;
> }
>
> he_mcs->rx_mcs_80 = cpu_to_le16(mcs_map);
> he_mcs->tx_mcs_80 = cpu_to_le16(mcs_map);
> + if (phy->mt76->cap.has_bw160) {
> + he_mcs->rx_mcs_160 = cpu_to_le16(mcs_map);
> + he_mcs->tx_mcs_160 = cpu_to_le16(mcs_map);
> + }
>
But what about 80p80Mhz case?
Ryder
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: [PATCH v2] mt76: mt7921: introduce 160 MHz channel bandwidth support
2021-11-12 19:12 ` Ryder Lee
@ 2021-11-13 3:39 ` Deren Wu
2021-11-13 4:08 ` Ryder Lee
0 siblings, 1 reply; 6+ messages in thread
From: Deren Wu @ 2021-11-13 3:39 UTC (permalink / raw)
To: Ryder Lee, Felix Fietkau, Lorenzo Bianconi
Cc: Sean Wang, Soul Huang, YN Chen, Leon Yen, Eric-SY Chang, KM Lin,
Robin Chiu, CH Yeh, Posh Sun, Eric Liang, Stella Chang,
Evelyn Tsai, Shayne Chen, linux-wireless, linux-mediatek
On Sat, 2021-11-13 at 03:12 +0800, Ryder Lee wrote:
> On Mon, 2021-11-08 at 22:41 +0800, Deren Wu wrote:
> > From: Deren Wu <deren.wu@mediatek.com>
> >
> > Introduce the basic configuration for chips with BW160 capability
> >
> > Signed-off-by: Deren Wu <deren.wu@mediatek.com>
> > ---
> > drivers/net/wireless/mediatek/mt76/mt76.h | 1 +
> > drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.c | 1 +
> > drivers/net/wireless/mediatek/mt76/mt7921/init.c | 4 ++++
> > drivers/net/wireless/mediatek/mt76/mt7921/main.c | 12
> > ++++++++++++
> > 4 files changed, 18 insertions(+)
> >
> > diff --git a/drivers/net/wireless/mediatek/mt76/mt76.h
> > b/drivers/net/wireless/mediatek/mt76/mt76.h
> > index e2da720a91b6..babca8086027 100644
> > --- a/drivers/net/wireless/mediatek/mt76/mt76.h
> > +++ b/drivers/net/wireless/mediatek/mt76/mt76.h
> > @@ -346,6 +346,7 @@ struct mt76_hw_cap {
> > bool has_2ghz;
> > bool has_5ghz;
> > bool has_6ghz;
> > + bool has_bw160;
> > };
> >
> > #define MT_DRV_TXWI_NO_FREE BIT(0)
> > diff --git a/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.c
> > b/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.c
> > index 26b4b875dcc0..3b42e1e8e970 100644
> > --- a/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.c
> > +++ b/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.c
> > @@ -1775,6 +1775,7 @@ static void
> > mt76_connac_mcu_parse_phy_cap(struct mt76_dev *dev,
> > dev->phy.chainmask = dev->phy.antenna_mask;
> > dev->phy.cap.has_2ghz = cap->hw_path & BIT(WF0_24G);
> > dev->phy.cap.has_5ghz = cap->hw_path & BIT(WF0_5G);
> > + dev->phy.cap.has_bw160 = cap->max_bw ==
> > IEEE80211_STA_RX_BW_160;
> > }
> >
> > int mt76_connac_mcu_get_nic_capability(struct mt76_phy *phy)
> > diff --git a/drivers/net/wireless/mediatek/mt76/mt7921/init.c
> > b/drivers/net/wireless/mediatek/mt76/mt7921/init.c
> > index 210998f086ab..30c0246fba3a 100644
> > --- a/drivers/net/wireless/mediatek/mt76/mt7921/init.c
> > +++ b/drivers/net/wireless/mediatek/mt76/mt7921/init.c
> > @@ -264,6 +264,10 @@ int mt7921_register_device(struct mt7921_dev
> > *dev)
> > IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE |
> > IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE |
> > (3 << IEEE80211_VHT_CAP_BEAMFORMEE_STS_SHIFT);
> > + if (dev->mt76.phy.cap.has_bw160)
> > + dev->mphy.sband_5g.sband.vht_cap.cap |=
> > + IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ |
> > + IEEE80211_VHT_CAP_SHORT_GI_160;
> >
> > dev->mphy.hw->wiphy->available_antennas_rx = dev-
> > > mphy.chainmask;
> >
> > dev->mphy.hw->wiphy->available_antennas_tx = dev-
> > > mphy.chainmask;
> >
> > diff --git a/drivers/net/wireless/mediatek/mt76/mt7921/main.c
> > b/drivers/net/wireless/mediatek/mt76/mt7921/main.c
> > index 633c6d2a57ac..af8c675f909f 100644
> > --- a/drivers/net/wireless/mediatek/mt76/mt7921/main.c
> > +++ b/drivers/net/wireless/mediatek/mt76/mt7921/main.c
> > @@ -128,11 +128,23 @@ mt7921_init_he_caps(struct mt7921_phy *phy,
> > enum nl80211_band band,
> > IEEE80211_HE_PHY_CAP9_RX_1024_QAM_LESS_
> > THAN_242_TONE_RU |
> > IEEE80211_HE_PHY_CAP9_RX_FULL_BW_SU_USI
> > NG_MU_WITH_COMP_SIGB |
> > IEEE80211_HE_PHY_CAP9_RX_FULL_BW_SU_USI
> > NG_MU_WITH_NON_COMP_SIGB;
> > +
> > + if (phy->mt76->cap.has_bw160) {
> > + he_cap_elem->phy_cap_info[0] |=
> > + IEEE80211_HE_PHY_CAP0_CHANNEL_W
> > IDTH_SET_160MHZ_IN_5G;
> > + he_cap_elem->phy_cap_info[8] |=
> > + IEEE80211_HE_PHY_CAP8_20MHZ_IN_
> > 160MHZ_HE_PPDU |
> > + IEEE80211_HE_PHY_CAP8_80MHZ_IN_
> > 160MHZ_HE_PPDU;
> > + }
> > break;
> > }
> >
> > he_mcs->rx_mcs_80 = cpu_to_le16(mcs_map);
> > he_mcs->tx_mcs_80 = cpu_to_le16(mcs_map);
> > + if (phy->mt76->cap.has_bw160) {
> > + he_mcs->rx_mcs_160 = cpu_to_le16(mcs_map);
> > + he_mcs->tx_mcs_160 = cpu_to_le16(mcs_map);
> > + }
> >
>
> But what about 80p80Mhz case?
>
> Ryder
>
Since 80p80MHz is not supprted in mt7921, we should not register this
capability to mac80211. When the feature coming, we may have a new
config cap.has_bw80p80 to adapte the new flow.
Regards,
Deren
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: [PATCH v2] mt76: mt7921: introduce 160 MHz channel bandwidth support
2021-11-13 3:39 ` Deren Wu
@ 2021-11-13 4:08 ` Ryder Lee
2021-11-14 2:34 ` Deren Wu
0 siblings, 1 reply; 6+ messages in thread
From: Ryder Lee @ 2021-11-13 4:08 UTC (permalink / raw)
To: Deren Wu, Felix Fietkau, Lorenzo Bianconi
Cc: Sean Wang, Soul Huang, YN Chen, Leon Yen, Eric-SY Chang, KM Lin,
Robin Chiu, CH Yeh, Posh Sun, Eric Liang, Stella Chang,
Evelyn Tsai, Shayne Chen, linux-wireless, linux-mediatek
On Sat, 2021-11-13 at 11:39 +0800, Deren Wu wrote:
> On Sat, 2021-11-13 at 03:12 +0800, Ryder Lee wrote:
> > On Mon, 2021-11-08 at 22:41 +0800, Deren Wu wrote:
> > > From: Deren Wu <deren.wu@mediatek.com>
> > >
> > > Introduce the basic configuration for chips with BW160 capability
> > >
> > > Signed-off-by: Deren Wu <deren.wu@mediatek.com>
> > > ---
> > > drivers/net/wireless/mediatek/mt76/mt76.h | 1 +
> > > drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.c | 1 +
> > > drivers/net/wireless/mediatek/mt76/mt7921/init.c | 4 ++++
> > > drivers/net/wireless/mediatek/mt76/mt7921/main.c | 12
> > > ++++++++++++
> > > 4 files changed, 18 insertions(+)
> > >
> > > diff --git a/drivers/net/wireless/mediatek/mt76/mt76.h
> > > b/drivers/net/wireless/mediatek/mt76/mt76.h
> > > index e2da720a91b6..babca8086027 100644
> > > --- a/drivers/net/wireless/mediatek/mt76/mt76.h
> > > +++ b/drivers/net/wireless/mediatek/mt76/mt76.h
> > > @@ -346,6 +346,7 @@ struct mt76_hw_cap {
> > > bool has_2ghz;
> > > bool has_5ghz;
> > > bool has_6ghz;
> > > + bool has_bw160;
> > > };
> > >
> > > #define MT_DRV_TXWI_NO_FREE BIT(0)
> > > diff --git a/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.c
> > > b/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.c
> > > index 26b4b875dcc0..3b42e1e8e970 100644
> > > --- a/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.c
> > > +++ b/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.c
> > > @@ -1775,6 +1775,7 @@ static void
> > > mt76_connac_mcu_parse_phy_cap(struct mt76_dev *dev,
> > > dev->phy.chainmask = dev->phy.antenna_mask;
> > > dev->phy.cap.has_2ghz = cap->hw_path & BIT(WF0_24G);
> > > dev->phy.cap.has_5ghz = cap->hw_path & BIT(WF0_5G);
> > > + dev->phy.cap.has_bw160 = cap->max_bw ==
> > > IEEE80211_STA_RX_BW_160;
> > > }
> > >
> > > int mt76_connac_mcu_get_nic_capability(struct mt76_phy *phy)
> > > diff --git a/drivers/net/wireless/mediatek/mt76/mt7921/init.c
> > > b/drivers/net/wireless/mediatek/mt76/mt7921/init.c
> > > index 210998f086ab..30c0246fba3a 100644
> > > --- a/drivers/net/wireless/mediatek/mt76/mt7921/init.c
> > > +++ b/drivers/net/wireless/mediatek/mt76/mt7921/init.c
> > > @@ -264,6 +264,10 @@ int mt7921_register_device(struct mt7921_dev
> > > *dev)
> > > IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE |
> > > IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE |
> > > (3 << IEEE80211_VHT_CAP_BEAMFORMEE_STS_SHIFT);
> > > + if (dev->mt76.phy.cap.has_bw160)
> > > + dev->mphy.sband_5g.sband.vht_cap.cap |=
> > > + IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ |
> > > + IEEE80211_VHT_CAP_SHORT_GI_160;
> > >
> > > dev->mphy.hw->wiphy->available_antennas_rx = dev-
> > > > mphy.chainmask;
> > >
> > > dev->mphy.hw->wiphy->available_antennas_tx = dev-
> > > > mphy.chainmask;
> > >
> > > diff --git a/drivers/net/wireless/mediatek/mt76/mt7921/main.c
> > > b/drivers/net/wireless/mediatek/mt76/mt7921/main.c
> > > index 633c6d2a57ac..af8c675f909f 100644
> > > --- a/drivers/net/wireless/mediatek/mt76/mt7921/main.c
> > > +++ b/drivers/net/wireless/mediatek/mt76/mt7921/main.c
> > > @@ -128,11 +128,23 @@ mt7921_init_he_caps(struct mt7921_phy *phy,
> > > enum nl80211_band band,
> > > IEEE80211_HE_PHY_CAP9_RX_1024_QAM_LESS_
> > > THAN_242_TONE_RU |
> > > IEEE80211_HE_PHY_CAP9_RX_FULL_BW_SU_USI
> > > NG_MU_WITH_COMP_SIGB |
> > > IEEE80211_HE_PHY_CAP9_RX_FULL_BW_SU_USI
> > > NG_MU_WITH_NON_COMP_SIGB;
> > > +
> > > + if (phy->mt76->cap.has_bw160) {
> > > + he_cap_elem->phy_cap_info[0] |=
> > > + IEEE80211_HE_PHY_CAP0_CHANNEL_W
> > > IDTH_SET_160MHZ_IN_5G;
> > > + he_cap_elem->phy_cap_info[8] |=
> > > + IEEE80211_HE_PHY_CAP8_20MHZ_IN_
> > > 160MHZ_HE_PPDU |
> > > + IEEE80211_HE_PHY_CAP8_80MHZ_IN_
> > > 160MHZ_HE_PPDU;
> > > + }
> > > break;
> > > }
> > >
> > > he_mcs->rx_mcs_80 = cpu_to_le16(mcs_map);
> > > he_mcs->tx_mcs_80 = cpu_to_le16(mcs_map);
> > > + if (phy->mt76->cap.has_bw160) {
> > > + he_mcs->rx_mcs_160 = cpu_to_le16(mcs_map);
> > > + he_mcs->tx_mcs_160 = cpu_to_le16(mcs_map);
> > > + }
> > >
> >
> > But what about 80p80Mhz case?
> >
> > Ryder
> >
>
> Since 80p80MHz is not supprted in mt7921, we should not register this
> capability to mac80211. When the feature coming, we may have a new
> config cap.has_bw80p80 to adapte the new flow.
>
Then, how to tell 80p80M and 160M apart with only checking
IEEE80211_STA_RX_BW_160?
* @IEEE80211_STA_RX_BW_160: station can receive up to 160 MHz
* (including 80+80 MHz)
Maybe move has_bw80p80 into mt7921_dev as it is not generic to me?
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: [PATCH v2] mt76: mt7921: introduce 160 MHz channel bandwidth support
2021-11-13 4:08 ` Ryder Lee
@ 2021-11-14 2:34 ` Deren Wu
2021-11-14 5:34 ` Ryder Lee
0 siblings, 1 reply; 6+ messages in thread
From: Deren Wu @ 2021-11-14 2:34 UTC (permalink / raw)
To: Ryder Lee, Felix Fietkau, Lorenzo Bianconi
Cc: Sean Wang, Soul Huang, YN Chen, Leon Yen, Eric-SY Chang, KM Lin,
Robin Chiu, CH Yeh, Posh Sun, Eric Liang, Stella Chang,
Evelyn Tsai, Shayne Chen, linux-wireless, linux-mediatek
Hi Ryder,
On Sat, 2021-11-13 at 12:08 +0800, Ryder Lee wrote:
> On Sat, 2021-11-13 at 11:39 +0800, Deren Wu wrote:
> > On Sat, 2021-11-13 at 03:12 +0800, Ryder Lee wrote:
> > > On Mon, 2021-11-08 at 22:41 +0800, Deren Wu wrote:
> > > > From: Deren Wu <deren.wu@mediatek.com>
> > > >
> > > > Introduce the basic configuration for chips with BW160
> > > > capability
> > > >
> > > > Signed-off-by: Deren Wu <deren.wu@mediatek.com>
> > > > ---
> > > > drivers/net/wireless/mediatek/mt76/mt76.h | 1 +
> > > > drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.c | 1 +
> > > > drivers/net/wireless/mediatek/mt76/mt7921/init.c | 4 ++++
> > > > drivers/net/wireless/mediatek/mt76/mt7921/main.c | 12
> > > > ++++++++++++
> > > > 4 files changed, 18 insertions(+)
> > > >
> > > > diff --git a/drivers/net/wireless/mediatek/mt76/mt76.h
> > > > b/drivers/net/wireless/mediatek/mt76/mt76.h
> > > > index e2da720a91b6..babca8086027 100644
> > > > --- a/drivers/net/wireless/mediatek/mt76/mt76.h
> > > > +++ b/drivers/net/wireless/mediatek/mt76/mt76.h
> > > > @@ -346,6 +346,7 @@ struct mt76_hw_cap {
> > > > bool has_2ghz;
> > > > bool has_5ghz;
> > > > bool has_6ghz;
> > > > + bool has_bw160;
> > > > };
> > > >
> > > > #define MT_DRV_TXWI_NO_FREE BIT(0)
> > > > diff --git
> > > > a/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.c
> > > > b/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.c
> > > > index 26b4b875dcc0..3b42e1e8e970 100644
> > > > --- a/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.c
> > > > +++ b/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.c
> > > > @@ -1775,6 +1775,7 @@ static void
> > > > mt76_connac_mcu_parse_phy_cap(struct mt76_dev *dev,
> > > > dev->phy.chainmask = dev->phy.antenna_mask;
> > > > dev->phy.cap.has_2ghz = cap->hw_path & BIT(WF0_24G);
> > > > dev->phy.cap.has_5ghz = cap->hw_path & BIT(WF0_5G);
> > > > + dev->phy.cap.has_bw160 = cap->max_bw ==
> > > > IEEE80211_STA_RX_BW_160;
> > > > }
> > > >
> > > > int mt76_connac_mcu_get_nic_capability(struct mt76_phy *phy)
> > > > diff --git a/drivers/net/wireless/mediatek/mt76/mt7921/init.c
> > > > b/drivers/net/wireless/mediatek/mt76/mt7921/init.c
> > > > index 210998f086ab..30c0246fba3a 100644
> > > > --- a/drivers/net/wireless/mediatek/mt76/mt7921/init.c
> > > > +++ b/drivers/net/wireless/mediatek/mt76/mt7921/init.c
> > > > @@ -264,6 +264,10 @@ int mt7921_register_device(struct
> > > > mt7921_dev
> > > > *dev)
> > > > IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE
> > > > |
> > > > IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE
> > > > |
> > > > (3 <<
> > > > IEEE80211_VHT_CAP_BEAMFORMEE_STS_SHIFT);
> > > > + if (dev->mt76.phy.cap.has_bw160)
> > > > + dev->mphy.sband_5g.sband.vht_cap.cap |=
> > > > + IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MH
> > > > Z |
> > > > + IEEE80211_VHT_CAP_SHORT_GI_160;
> > > >
> > > > dev->mphy.hw->wiphy->available_antennas_rx = dev-
> > > > > mphy.chainmask;
> > > >
> > > > dev->mphy.hw->wiphy->available_antennas_tx = dev-
> > > > > mphy.chainmask;
> > > >
> > > > diff --git a/drivers/net/wireless/mediatek/mt76/mt7921/main.c
> > > > b/drivers/net/wireless/mediatek/mt76/mt7921/main.c
> > > > index 633c6d2a57ac..af8c675f909f 100644
> > > > --- a/drivers/net/wireless/mediatek/mt76/mt7921/main.c
> > > > +++ b/drivers/net/wireless/mediatek/mt76/mt7921/main.c
> > > > @@ -128,11 +128,23 @@ mt7921_init_he_caps(struct mt7921_phy
> > > > *phy,
> > > > enum nl80211_band band,
> > > > IEEE80211_HE_PHY_CAP9_RX_1024_Q
> > > > AM_LESS_
> > > > THAN_242_TONE_RU |
> > > > IEEE80211_HE_PHY_CAP9_RX_FULL_B
> > > > W_SU_USI
> > > > NG_MU_WITH_COMP_SIGB |
> > > > IEEE80211_HE_PHY_CAP9_RX_FULL_B
> > > > W_SU_USI
> > > > NG_MU_WITH_NON_COMP_SIGB;
> > > > +
> > > > + if (phy->mt76->cap.has_bw160) {
> > > > + he_cap_elem->phy_cap_info[0] |=
> > > > + IEEE80211_HE_PHY_CAP0_C
> > > > HANNEL_W
> > > > IDTH_SET_160MHZ_IN_5G;
> > > > + he_cap_elem->phy_cap_info[8] |=
> > > > + IEEE80211_HE_PHY_CAP8_2
> > > > 0MHZ_IN_
> > > > 160MHZ_HE_PPDU |
> > > > + IEEE80211_HE_PHY_CAP8_8
> > > > 0MHZ_IN_
> > > > 160MHZ_HE_PPDU;
> > > > + }
> > > > break;
> > > > }
> > > >
> > > > he_mcs->rx_mcs_80 = cpu_to_le16(mcs_map);
> > > > he_mcs->tx_mcs_80 = cpu_to_le16(mcs_map);
> > > > + if (phy->mt76->cap.has_bw160) {
> > > > + he_mcs->rx_mcs_160 =
> > > > cpu_to_le16(mcs_map);
> > > > + he_mcs->tx_mcs_160 =
> > > > cpu_to_le16(mcs_map);
> > > > + }
> > > >
> > >
> > > But what about 80p80Mhz case?
> > >
> > > Ryder
> > >
> >
> > Since 80p80MHz is not supprted in mt7921, we should not register
> > this
> > capability to mac80211. When the feature coming, we may have a new
> > config cap.has_bw80p80 to adapte the new flow.
> >
>
> Then, how to tell 80p80M and 160M apart with only checking
> IEEE80211_STA_RX_BW_160?
>
> * @IEEE80211_STA_RX_BW_160: station can receive up to 160 MHz
> * (including 80+80 MHz)
>
> Maybe move has_bw80p80 into mt7921_dev as it is not generic to me?
>
As you noted, both 80p80M and 160M are included in
IEEE80211_STA_RX_BW_160. We may not check two features
by IEEE80211_STA_RX_BW_160 only. That is why I prefer to have
.has_bw160 and .has_80p80 at next stage.
With the new feature, HW should report different result in the flow of
chip capability check. The check point should start from
mt76_connac_mcu_parse_XXXX_cap() and then we can know the real
capabilities of this HW chip.
Regards,
Deren
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: [PATCH v2] mt76: mt7921: introduce 160 MHz channel bandwidth support
2021-11-14 2:34 ` Deren Wu
@ 2021-11-14 5:34 ` Ryder Lee
0 siblings, 0 replies; 6+ messages in thread
From: Ryder Lee @ 2021-11-14 5:34 UTC (permalink / raw)
To: Deren Wu, Felix Fietkau, Lorenzo Bianconi
Cc: Sean Wang, Soul Huang, YN Chen, Leon Yen, Eric-SY Chang, KM Lin,
Robin Chiu, CH Yeh, Posh Sun, Eric Liang, Stella Chang,
Evelyn Tsai, Shayne Chen, linux-wireless, linux-mediatek
> > >
> > > Since 80p80MHz is not supprted in mt7921, we should not register
> > > this
> > > capability to mac80211. When the feature coming, we may have a
> > > new
> > > config cap.has_bw80p80 to adapte the new flow.
> > >
> >
> > Then, how to tell 80p80M and 160M apart with only checking
> > IEEE80211_STA_RX_BW_160?
> >
> > * @IEEE80211_STA_RX_BW_160: station can receive up to 160 MHz
> > * (including 80+80 MHz)
> >
> > Maybe move has_bw80p80 into mt7921_dev as it is not generic to me?
> >
>
> As you noted, both 80p80M and 160M are included in
> IEEE80211_STA_RX_BW_160. We may not check two features
> by IEEE80211_STA_RX_BW_160 only. That is why I prefer to have
> .has_bw160 and .has_80p80 at next stage.
>
> With the new feature, HW should report different result in the flow
> of
> chip capability check. The check point should start from
> mt76_connac_mcu_parse_XXXX_cap() and then we can know the real
> capabilities of this HW chip.
>
What about using device id? I think we can easily determine the BW
without adding .has_xx in to common core, and it looks more like a 7921specific stuff though.
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2021-11-14 5:34 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-11-08 14:41 [PATCH v2] mt76: mt7921: introduce 160 MHz channel bandwidth support Deren Wu
2021-11-12 19:12 ` Ryder Lee
2021-11-13 3:39 ` Deren Wu
2021-11-13 4:08 ` Ryder Lee
2021-11-14 2:34 ` Deren Wu
2021-11-14 5:34 ` Ryder Lee
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).