linux-wireless.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Matt Chen <mattsled@gmail.com>
To: darklight wu <darklightwu@gmail.com>
Cc: linux-wireless <linux-wireless@vger.kernel.org>,
	Emmanuel Grumbach <egrumbach@gmail.com>
Subject: Re: Failed to capture data packets using Monitor mode with Intel 7260 card. (Under Ubuntu 14.04)
Date: Wed, 20 May 2015 11:43:49 +0800	[thread overview]
Message-ID: <CALx5=V891GJAH499qLV+RiJPg3vftt5yrp_rdKyOyn+1aidtpw@mail.gmail.com> (raw)
In-Reply-To: <CANUX_P0rRqbks5LDiUjekTEjXV5nQoc1iSr4PhWd0cek7AnWQQ@mail.gmail.com>

probably you need to disable your NetworkManager and wpa_supplicant.
Then switch/change your mode to monitor. Make sure the command "iw
[interface_name] info" shows you the type is monitor.

2015-05-20 1:41 GMT+08:00 Emmanuel Grumbach <egrumbach@gmail.com>:
> On Tue, May 19, 2015 at 7:44 PM, darklight wu <darklightwu@gmail.com> wrote:
>> On Mon, May 18, 2015 at 3:26 PM, Emmanuel Grumbach <egrumbach@gmail.com> wrote:
>>> On Mon, May 18, 2015 at 10:01 AM, darklight wu <darklightwu@gmail.com> wrote:
>>>> Hi, All:
>>>>
>>>> I configured the Wifi Monitor mode with Intel 7260 card under
>>>> Ubuntu14.04 and then used Wireshark to capture packets from air. But I
>>>> could only get management/control packets but no data packets. I tried
>>>> different channels and also with HT20 or HT40+/-.
>>>>
>>>> The commands I used were:
>>>>
>>>> iw dev wlan0 interface add mon0 type monitor
>>>> iw dev wlan0 del  //I googled and was told I needed to delete the
>>>> wlan0 first. Or else I got device busy (-16) error
>>>> ifconfig mon0 up
>>>> iw dev mon0 set channel 1
>>>>
>>>> I also tried to use other ways like "airmon-ng start wlan0". All the
>>>> observations were same, no data packets. It's weird! Anyone has a
>>>> clue?
>>>>
>>>
>>> This is weird. But I recommend to add power_scheme=1 as a module
>>> parameter to iwlmvm. Since iwlmvm is loaded automatically, you'll need
>>> to add that to /etc/modprobe.d/iwlwifi.conf.
>>> 14.04 ships 3.13 and I remember we had issues with monitor mode at
>>> that time. You may want to try a newer kernel.
>>
>> I tried again today with "power_scheme=1" and also booted with Ubuntu
>> 15.04. Both still failed to work in monitor mode. And with Ubuntu
>> 15.04, I event could not configure the nic to work on monitor mode.
>> The same commands at least can set the monitor mode under 14.04.
>> Meanwhile, I just want to clarify, the nic could capture data packets
>> to/from itself but could not capture others that were not belongs to
>> it. My co-worker tried on another machine with Ubuntu 14.04, he was
>> also failed.
>>
>> Any tricks here?
>
> You must not have any interface besides the monitor interface. I bet
> you still have the wpa_supplicant running and this is why you only
> have a virtual monitor interface that catches the packet from your
> managed interface only.
> --
> To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

  reply	other threads:[~2015-05-20  3:43 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-05-18  7:01 Failed to capture data packets using Monitor mode with Intel 7260 card. (Under Ubuntu 14.04) darklight wu
2015-05-18  7:26 ` Emmanuel Grumbach
2015-05-19 16:44   ` darklight wu
2015-05-19 17:41     ` Emmanuel Grumbach
2015-05-20  3:43       ` Matt Chen [this message]
2015-05-20  4:00         ` darklight wu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='CALx5=V891GJAH499qLV+RiJPg3vftt5yrp_rdKyOyn+1aidtpw@mail.gmail.com' \
    --to=mattsled@gmail.com \
    --cc=darklightwu@gmail.com \
    --cc=egrumbach@gmail.com \
    --cc=linux-wireless@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).