Linux-Wireless Archive on lore.kernel.org
 help / color / Atom feed
* [GIT PULL] Add NVRAM files for bcm43455 found on RPi4
@ 2019-11-27 16:23 Matthias Brugger
  2019-12-04  7:50 ` Matthias Brugger
  2019-12-15 12:26 ` Josh Boyer
  0 siblings, 2 replies; 3+ messages in thread
From: Matthias Brugger @ 2019-11-27 16:23 UTC (permalink / raw)
  To: Linux Firmware
  Cc: linux-wireless, serge, Phil Elwell, Arend van Spriel,
	Hans de Goede, Takashi Iwai, Guillaume Gardet

Hi Josh,
Hi all,

This pull request adds the NVRAM config file for BCM43455 as needed by Raspberry
Pi 4. The only difference to the file for RPi3 is the value of boardflags3.

Please have a look and drop me a line, if you have any issues.

Regards,
Matthias

---
The following changes since commit e8a0f4c9314754d8b2cbe9840357d88a861c438a:

  rtl_nic: add firmware rtl8168fp-3 (2019-11-18 16:16:01 -0500)

are available in the Git repository at:


https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux-firmware.git
rpi4-fw

for you to fetch changes up to f93c7a18dbb3705aa1899318c3bf5d3819cd7781:

  brcm: Add BCM43455 NVRAM for Raspberry Pi 4 B (2019-11-27 17:12:39 +0100)

----------------------------------------------------------------
Matthias Brugger (1):
      brcm: Add BCM43455 NVRAM for Raspberry Pi 4 B

 brcm/brcmfmac43455-sdio.raspberrypi,4-model-b.txt | 82 +++++++++++++++++++++++
 1 file changed, 82 insertions(+)
 create mode 100644 brcm/brcmfmac43455-sdio.raspberrypi,4-model-b.txt

^ permalink raw reply	[flat|nested] 3+ messages in thread

* Re: [GIT PULL] Add NVRAM files for bcm43455 found on RPi4
  2019-11-27 16:23 [GIT PULL] Add NVRAM files for bcm43455 found on RPi4 Matthias Brugger
@ 2019-12-04  7:50 ` Matthias Brugger
  2019-12-15 12:26 ` Josh Boyer
  1 sibling, 0 replies; 3+ messages in thread
From: Matthias Brugger @ 2019-12-04  7:50 UTC (permalink / raw)
  To: Linux Firmware
  Cc: linux-wireless, serge, Phil Elwell, Arend van Spriel,
	Hans de Goede, Takashi Iwai, Guillaume Gardet

On 27/11/2019 17:23, Matthias Brugger wrote:
> Hi Josh,
> Hi all,
> 

Friendly reminder, do you have any objections to include this file to the
repository?

Regards,
Matthias

> This pull request adds the NVRAM config file for BCM43455 as needed by Raspberry
> Pi 4. The only difference to the file for RPi3 is the value of boardflags3.
> 
> Please have a look and drop me a line, if you have any issues.
> 
> Regards,
> Matthias
> 
> ---
> The following changes since commit e8a0f4c9314754d8b2cbe9840357d88a861c438a:
> 
>   rtl_nic: add firmware rtl8168fp-3 (2019-11-18 16:16:01 -0500)
> 
> are available in the Git repository at:
> 
> 
> https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux-firmware.git
> rpi4-fw
> 
> for you to fetch changes up to f93c7a18dbb3705aa1899318c3bf5d3819cd7781:
> 
>   brcm: Add BCM43455 NVRAM for Raspberry Pi 4 B (2019-11-27 17:12:39 +0100)
> 
> ----------------------------------------------------------------
> Matthias Brugger (1):
>       brcm: Add BCM43455 NVRAM for Raspberry Pi 4 B
> 
>  brcm/brcmfmac43455-sdio.raspberrypi,4-model-b.txt | 82 +++++++++++++++++++++++
>  1 file changed, 82 insertions(+)
>  create mode 100644 brcm/brcmfmac43455-sdio.raspberrypi,4-model-b.txt
> 


^ permalink raw reply	[flat|nested] 3+ messages in thread

* Re: [GIT PULL] Add NVRAM files for bcm43455 found on RPi4
  2019-11-27 16:23 [GIT PULL] Add NVRAM files for bcm43455 found on RPi4 Matthias Brugger
  2019-12-04  7:50 ` Matthias Brugger
@ 2019-12-15 12:26 ` Josh Boyer
  1 sibling, 0 replies; 3+ messages in thread
From: Josh Boyer @ 2019-12-15 12:26 UTC (permalink / raw)
  To: Matthias Brugger
  Cc: Linux Firmware, linux-wireless, serge, Phil Elwell,
	Arend van Spriel, Hans de Goede, Takashi Iwai, Guillaume Gardet

On Wed, Nov 27, 2019 at 11:23 AM Matthias Brugger
<matthias.bgg@gmail.com> wrote:
>
> Hi Josh,
> Hi all,
>
> This pull request adds the NVRAM config file for BCM43455 as needed by Raspberry
> Pi 4. The only difference to the file for RPi3 is the value of boardflags3.
>
> Please have a look and drop me a line, if you have any issues.
>
> Regards,
> Matthias
>
> ---
> The following changes since commit e8a0f4c9314754d8b2cbe9840357d88a861c438a:
>
>   rtl_nic: add firmware rtl8168fp-3 (2019-11-18 16:16:01 -0500)
>
> are available in the Git repository at:
>
>
> https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux-firmware.git
> rpi4-fw
>
> for you to fetch changes up to f93c7a18dbb3705aa1899318c3bf5d3819cd7781:
>
>   brcm: Add BCM43455 NVRAM for Raspberry Pi 4 B (2019-11-27 17:12:39 +0100)
>
> ----------------------------------------------------------------
> Matthias Brugger (1):
>       brcm: Add BCM43455 NVRAM for Raspberry Pi 4 B
>
>  brcm/brcmfmac43455-sdio.raspberrypi,4-model-b.txt | 82 +++++++++++++++++++++++
>  1 file changed, 82 insertions(+)
>  create mode 100644 brcm/brcmfmac43455-sdio.raspberrypi,4-model-b.txt

Pulled and pushed out.  You didn't update WHENCE, so I added a commit
to correct that.

josh

^ permalink raw reply	[flat|nested] 3+ messages in thread

end of thread, back to index

Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-11-27 16:23 [GIT PULL] Add NVRAM files for bcm43455 found on RPi4 Matthias Brugger
2019-12-04  7:50 ` Matthias Brugger
2019-12-15 12:26 ` Josh Boyer

Linux-Wireless Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-wireless/0 linux-wireless/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-wireless linux-wireless/ https://lore.kernel.org/linux-wireless \
		linux-wireless@vger.kernel.org
	public-inbox-index linux-wireless

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-wireless


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git