linux-wireless.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Alexander Duyck <alexander.h.duyck@linux.intel.com>
To: Stanislaw Gruszka <sgruszka@redhat.com>,
	Rosen Penev <rosenp@gmail.com>, Joerg Roedel <joro@8bytes.org>
Cc: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>,
	linux-wireless <linux-wireless@vger.kernel.org>,
	Samuel Sieb <samuel@sieb.net>,
	iommu@lists.linux-foundation.org, linux-kernel@vger.kernel.org,
	linux-nvme@lists.infradead.org, jan.viktorin@gmail.com
Subject: Re: [PATCH] iommu/amd: fix sg->dma_address for sg->offset bigger than PAGE_SIZE
Date: Mon, 11 Mar 2019 08:47:44 -0700	[thread overview]
Message-ID: <e0630ae9d9bee73d8a1ce3499ea9f77900e9cdfa.camel@linux.intel.com> (raw)
In-Reply-To: <20190311090314.GB3310@redhat.com>

On Mon, 2019-03-11 at 10:03 +0100, Stanislaw Gruszka wrote:
> Take into account that sg->offset can be bigger than PAGE_SIZE when
> setting segment sg->dma_address. Otherwise sg->dma_address will point
> at diffrent page, what makes DMA not possible with erros like this:
> 
> xhci_hcd 0000:38:00.3: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0000 address=0x00000000fdaa70c0 flags=0x0020]
> xhci_hcd 0000:38:00.3: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0000 address=0x00000000fdaa7040 flags=0x0020]
> xhci_hcd 0000:38:00.3: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0000 address=0x00000000fdaa7080 flags=0x0020]
> xhci_hcd 0000:38:00.3: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0000 address=0x00000000fdaa7100 flags=0x0020]
> xhci_hcd 0000:38:00.3: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0000 address=0x00000000fdaa7000 flags=0x0020]
> 
> Additinally with wrong sg->dma_address unmap_sg will free wrong pages,
> what what can cause crashes like this:
> 
> Feb 28 19:27:45 kernel: BUG: Bad page state in process cinnamon  pfn:39e8b1
> Feb 28 19:27:45 kernel: Disabling lock debugging due to kernel taint
> Feb 28 19:27:45 kernel: flags: 0x2ffff0000000000()
> Feb 28 19:27:45 kernel: raw: 02ffff0000000000 0000000000000000 ffffffff00000301 0000000000000000
> Feb 28 19:27:45 kernel: raw: 0000000000000000 0000000000000000 00000001ffffffff 0000000000000000
> Feb 28 19:27:45 kernel: page dumped because: nonzero _refcount
> Feb 28 19:27:45 kernel: Modules linked in: ccm fuse arc4 nct6775 hwmon_vid amdgpu nls_iso8859_1 nls_cp437 edac_mce_amd vfat fat kvm_amd ccp rng_core kvm mt76x0u mt76x0_common mt76x02_usb irqbypass mt76_usb mt76x02_lib mt76 crct10dif_pclmul crc32_pclmul chash mac80211 amd_iommu_v2 ghash_clmulni_intel gpu_sched i2c_algo_bit ttm wmi_bmof snd_hda_codec_realtek snd_hda_codec_generic drm_kms_helper snd_hda_codec_hdmi snd_hda_intel drm snd_hda_codec aesni_intel snd_hda_core snd_hwdep aes_x86_64 crypto_simd snd_pcm cfg80211 cryptd mousedev snd_timer glue_helper pcspkr r8169 input_leds realtek agpgart libphy rfkill snd syscopyarea sysfillrect sysimgblt fb_sys_fops soundcore sp5100_tco k10temp i2c_piix4 wmi evdev gpio_amdpt pinctrl_amd mac_hid pcc_cpufreq acpi_cpufreq sg ip_tables x_tables ext4(E) crc32c_generic(E) crc16(E) mbcache(E) jbd2(E) fscrypto(E) sd_mod(E) hid_generic(E) usbhid(E) hid(E) dm_mod(E) serio_raw(E) atkbd(E) libps2(E) crc32c_intel(E) ahci(E) libahci(E) libata(E) xhci_pci(E
 ) xhci_hcd(E)
> Feb 28 19:27:45 kernel:  scsi_mod(E) i8042(E) serio(E) bcache(E) crc64(E)
> Feb 28 19:27:45 kernel: CPU: 2 PID: 896 Comm: cinnamon Tainted: G    B   W   E     4.20.12-arch1-1-custom #1
> Feb 28 19:27:45 kernel: Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./B450M Pro4, BIOS P1.20 06/26/2018
> Feb 28 19:27:45 kernel: Call Trace:
> Feb 28 19:27:45 kernel:  dump_stack+0x5c/0x80
> Feb 28 19:27:45 kernel:  bad_page.cold.29+0x7f/0xb2
> Feb 28 19:27:45 kernel:  __free_pages_ok+0x2c0/0x2d0
> Feb 28 19:27:45 kernel:  skb_release_data+0x96/0x180
> Feb 28 19:27:45 kernel:  __kfree_skb+0xe/0x20
> Feb 28 19:27:45 kernel:  tcp_recvmsg+0x894/0xc60
> Feb 28 19:27:45 kernel:  ? reuse_swap_page+0x120/0x340
> Feb 28 19:27:45 kernel:  ? ptep_set_access_flags+0x23/0x30
> Feb 28 19:27:45 kernel:  inet_recvmsg+0x5b/0x100
> Feb 28 19:27:45 kernel:  __sys_recvfrom+0xc3/0x180
> Feb 28 19:27:45 kernel:  ? handle_mm_fault+0x10a/0x250
> Feb 28 19:27:45 kernel:  ? syscall_trace_enter+0x1d3/0x2d0
> Feb 28 19:27:45 kernel:  ? __audit_syscall_exit+0x22a/0x290
> Feb 28 19:27:45 kernel:  __x64_sys_recvfrom+0x24/0x30
> Feb 28 19:27:45 kernel:  do_syscall_64+0x5b/0x170
> Feb 28 19:27:45 kernel:  entry_SYSCALL_64_after_hwframe+0x44/0xa9
> 
> Cc: stable@vger.kernel.org
> Reported-and-tested-by: jan.viktorin@gmail.com
> Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
> ---
>  drivers/iommu/amd_iommu.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/iommu/amd_iommu.c b/drivers/iommu/amd_iommu.c
> index 6b0760dafb3e..949621f33624 100644
> --- a/drivers/iommu/amd_iommu.c
> +++ b/drivers/iommu/amd_iommu.c
> @@ -2604,7 +2604,7 @@ static int map_sg(struct device *dev, struct scatterlist *sglist,
>  
>  	/* Everything is mapped - write the right values into s->dma_address */
>  	for_each_sg(sglist, s, nelems, i) {
> -		s->dma_address += address + s->offset;
> +		s->dma_address += address + (s->offset & ~PAGE_MASK);
>  		s->dma_length   = s->length;
>  	}
>  

You should add a comment calling out that this is needed because the
sg_phys(s) call above this is masked with PAGE_MASK. Then this makes
much more sense. Otherwise I would have assumed you needed either the
full offset or none.

Other than that, from that I can tell the code itself looks to be
correct, but just difficult to read.

Reviewed-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>


  reply	other threads:[~2019-03-11 15:47 UTC|newest]

Thread overview: 33+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-01-10 22:55 MT76x2U crashes XHCI driver on AMD Ryzen system Rosen Penev
2019-01-11 17:29 ` Lorenzo Bianconi
2019-01-11 19:01   ` Rosen Penev
2019-01-13 13:33     ` Lorenzo Bianconi
     [not found]       ` <1547404075.1582.0@smtp.gmail.com>
2019-01-13 19:00         ` Lorenzo Bianconi
2019-01-14  2:20           ` Rosen Penev
2019-01-14  3:13             ` Samuel Sieb
2019-01-14  9:18             ` Lorenzo Bianconi
2019-01-14  9:22               ` Tom Psyborg
2019-01-14 20:06               ` Rosen Penev
2019-01-15  9:04                 ` Lorenzo Bianconi
2019-02-18 14:37                   ` Stanislaw Gruszka
2019-02-18 15:15                     ` Lorenzo Bianconi
2019-02-18 17:01                     ` Robin Murphy
2019-02-19 11:08                       ` Stanislaw Gruszka
2019-02-26 10:05                     ` Joerg Roedel
2019-02-26 10:34                       ` Stanislaw Gruszka
2019-02-26 10:44                         ` Joerg Roedel
2019-02-26 11:24                           ` Stanislaw Gruszka
2019-02-28  9:04                             ` Stanislaw Gruszka
2019-02-28 10:42                               ` Stanislaw Gruszka
2019-02-28 12:19                                 ` Stanislaw Gruszka
2019-02-28 13:40                                   ` Joerg Roedel
2019-03-04  7:10                                     ` Stanislaw Gruszka
2019-03-04  7:20                                       ` Rosen Penev
2019-03-11  8:43                                         ` Stanislaw Gruszka
2019-03-11  9:03                                           ` [PATCH] iommu/amd: fix sg->dma_address for sg->offset bigger than PAGE_SIZE Stanislaw Gruszka
2019-03-11 15:47                                             ` Alexander Duyck [this message]
2019-03-12  7:08                                               ` Stanislaw Gruszka
2019-03-12 15:18                                                 ` Alexander Duyck
2019-03-13  9:03                                                   ` [PATCH v2] " Stanislaw Gruszka
2019-03-18 10:17                                                     ` Joerg Roedel
2019-03-12  7:13                                           ` MT76x2U crashes XHCI driver on AMD Ryzen system Stanislaw Gruszka

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=e0630ae9d9bee73d8a1ce3499ea9f77900e9cdfa.camel@linux.intel.com \
    --to=alexander.h.duyck@linux.intel.com \
    --cc=iommu@lists.linux-foundation.org \
    --cc=jan.viktorin@gmail.com \
    --cc=joro@8bytes.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-nvme@lists.infradead.org \
    --cc=linux-wireless@vger.kernel.org \
    --cc=lorenzo.bianconi@redhat.com \
    --cc=rosenp@gmail.com \
    --cc=samuel@sieb.net \
    --cc=sgruszka@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).