* iwl3945: Network dropouts w/ flash-stream in firefox
@ 2010-04-15 17:31 Sedat Dilek
0 siblings, 0 replies; only message in thread
From: Sedat Dilek @ 2010-04-15 17:31 UTC (permalink / raw)
To: wireless; +Cc: Reinette Chatre, Johannes Berg
Hi,
I have here reproduceable network dropouts with my iwl3945 wlan device
when watching flash10 A/V streams in firefox-3.6.3.
My Linux-kernel is 2.6.34-rc4-git3 enriched with "iwlwifi: work around
bogus active chains detection" patch from wireless-2.6 GIT branch,
so-to-say I am on version as-of master-2010-04-12.
Furthermore, I also did a reboot of my xDSL-router-modem and a
coldstart of my notebook.
Some additional informations:
$ dpkg -l | egrep 'wpa|crda|regdb'
ii crda
1.1.1-0~svnr1515.3 wireless Central Regulatory
Domain Agent
ii wireless-regdb
2009.11.25-0+c0.sidux.2 wireless regulatory database
ii wpagui
0.7.1-1~dileX+1 graphical user interface for
wpa_supplicant
ii wpasupplicant
0.7.1-1~dileX+1 client support for WPA and
WPA2 (IEEE 802.11i)
Need more infos?
Any hints? Any ideas?
Kind Regards,
- Sedat -
[dmesg]
...
[ 267.204048] No probe response from AP 00:04:0e:e4:00:3d after
500ms, disconnecting.
[ 267.704053] iwl3945 0000:10:00.0: Error sending REPLY_RXON: time
out after 500ms.
[ 267.704062] iwl3945 0000:10:00.0: Error setting new configuration (-110).
[ 268.206048] iwl3945 0000:10:00.0: Error sending REPLY_RXON: time
out after 500ms.
[ 268.206057] iwl3945 0000:10:00.0: Error setting new configuration (-110).
[ 268.208045] cfg80211: Calling CRDA to update world regulatory domain
[ 268.213286] cfg80211: World regulatory domain updated:
[ 268.213291] (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp)
[ 268.213298] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 268.213304] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 268.213310] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 268.213316] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 268.213322] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 268.806083] iwl3945 0000:10:00.0: Error sending REPLY_RXON: time
out after 500ms.
[ 268.806091] iwl3945 0000:10:00.0: Error setting new configuration (-110).
[ 269.306299] iwl3945 0000:10:00.0: Error sending REPLY_SCAN_CMD:
time out after 500ms.
[ 269.806072] iwl3945 0000:10:00.0: Error sending
REPLY_TX_PWR_TABLE_CMD: time out after 500ms.
[ 270.306060] iwl3945 0000:10:00.0: Error sending REPLY_SCAN_CMD:
time out after 500ms.
[ 270.806052] iwl3945 0000:10:00.0: Error sending REPLY_RXON: time
out after 500ms.
[ 270.806061] iwl3945 0000:10:00.0: Error setting new configuration (-110).
[ 271.306074] iwl3945 0000:10:00.0: Error sending REPLY_RXON: time
out after 500ms.
[ 271.306083] iwl3945 0000:10:00.0: Error setting new configuration (-110).
[ 271.806074] iwl3945 0000:10:00.0: Error sending
REPLY_TX_PWR_TABLE_CMD: time out after 500ms.
[ 275.811047] iwl3945 0000:10:00.0: Error sending REPLY_RXON: time
out after 500ms.
[ 275.811056] iwl3945 0000:10:00.0: Error setting new configuration (-110).
[ 276.311074] iwl3945 0000:10:00.0: Error sending REPLY_SCAN_CMD:
time out after 500ms.
[ 276.811068] iwl3945 0000:10:00.0: Error sending
REPLY_TX_PWR_TABLE_CMD: time out after 500ms.
[ 277.311068] iwl3945 0000:10:00.0: Error sending REPLY_SCAN_CMD:
time out after 500ms.
[ 277.811080] iwl3945 0000:10:00.0: Error sending REPLY_RXON: time
out after 500ms.
[ 277.811089] iwl3945 0000:10:00.0: Error setting new configuration (-110).
[ 278.311064] iwl3945 0000:10:00.0: Error sending REPLY_RXON: time
out after 500ms.
[ 278.311073] iwl3945 0000:10:00.0: Error setting new configuration (-110).
[ 278.811074] iwl3945 0000:10:00.0: Error sending
REPLY_TX_PWR_TABLE_CMD: time out after 500ms.
[ 282.814051] iwl3945 0000:10:00.0: Error sending REPLY_RXON: time
out after 500ms.
[ 282.814060] iwl3945 0000:10:00.0: Error setting new configuration (-110).
[ 283.314067] iwl3945 0000:10:00.0: Error sending REPLY_SCAN_CMD:
time out after 500ms.
[ 283.814063] iwl3945 0000:10:00.0: Error sending
REPLY_TX_PWR_TABLE_CMD: time out after 500ms.
[ 284.314063] iwl3945 0000:10:00.0: Error sending REPLY_SCAN_CMD:
time out after 500ms.
[ 284.814054] iwl3945 0000:10:00.0: Error sending REPLY_RXON: time
out after 500ms.
[ 284.814063] iwl3945 0000:10:00.0: Error setting new configuration (-110).
[ 285.314056] iwl3945 0000:10:00.0: Error sending REPLY_RXON: time
out after 500ms.
[ 285.314065] iwl3945 0000:10:00.0: Error setting new configuration (-110).
[ 285.814074] iwl3945 0000:10:00.0: Error sending
REPLY_TX_PWR_TABLE_CMD: time out after 500ms.
[ 287.814202] hda_codec_cleanup_stream: NID=0x3
[ 289.814060] iwl3945 0000:10:00.0: Error sending REPLY_RXON: time
out after 500ms.
[ 289.814068] iwl3945 0000:10:00.0: Error setting new configuration (-110).
[ 289.814107] iwl3945 0000:10:00.0: No space in command queue
[ 289.814113] iwl3945 0000:10:00.0: Restarting adapter due to queue full
[ 289.814120] iwl3945 0000:10:00.0: Error sending REPLY_SCAN_CMD:
enqueue_hcmd failed: -28
[ 298.367489] wlan0: authenticate with 00:04:0e:e4:00:3d (try 1)
[ 298.369762] wlan0: authenticated
[ 298.369861] wlan0: associate with 00:04:0e:e4:00:3d (try 1)
[ 298.374873] wlan0: RX ReassocResp from 00:04:0e:e4:00:3d
(capab=0x411 status=0 aid=1)
[ 298.374879] wlan0: associated
...
[/dmesg]
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2010-04-15 17:31 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2010-04-15 17:31 iwl3945: Network dropouts w/ flash-stream in firefox Sedat Dilek
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).