* [PATCH v2] generic/050: fix xfsquota configuration failures
@ 2019-11-27 16:34 Darrick J. Wong
2019-11-28 11:01 ` Jan Kara
2019-12-01 3:35 ` Eryu Guan
0 siblings, 2 replies; 3+ messages in thread
From: Darrick J. Wong @ 2019-11-27 16:34 UTC (permalink / raw)
To: Eryu Guan; +Cc: fstests, xfs, Jan Kara
From: Darrick J. Wong <darrick.wong@oracle.com>
The new 'xfsquota' configuration for generic/050 doesn't filter out
SCRATCH_MNT properly and seems to be missing an error message in the
golden output. Fix both of these problems.
Fixes: e088479871 ("generic/050: Handle xfs quota special case with different output")
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
---
v2: don't try the touch if the mount fails
---
tests/generic/050 | 12 +++++++-----
tests/generic/050.out.xfsquota | 5 ++---
2 files changed, 9 insertions(+), 8 deletions(-)
diff --git a/tests/generic/050 b/tests/generic/050
index cf2b9381..7eabc7a7 100755
--- a/tests/generic/050
+++ b/tests/generic/050
@@ -58,9 +58,11 @@ blockdev --setro $SCRATCH_DEV
# Mount it, and make sure we can't write to it, and we can unmount it again
#
echo "mounting read-only block device:"
-_try_scratch_mount 2>&1 | _filter_ro_mount
-echo "touching file on read-only filesystem (should fail)"
-touch $SCRATCH_MNT/foo 2>&1 | _filter_scratch
+_try_scratch_mount 2>&1 | _filter_ro_mount | _filter_scratch
+if [ "${PIPESTATUS[0]}" -eq 0 ]; then
+ echo "touching file on read-only filesystem (should fail)"
+ touch $SCRATCH_MNT/foo 2>&1 | _filter_scratch
+fi
#
# Apparently this used to be broken at some point:
@@ -92,7 +94,7 @@ blockdev --setro $SCRATCH_DEV
# -o norecovery is used.
#
echo "mounting filesystem that needs recovery on a read-only device:"
-_try_scratch_mount 2>&1 | _filter_ro_mount
+_try_scratch_mount 2>&1 | _filter_ro_mount | _filter_scratch
echo "unmounting read-only filesystem"
_scratch_unmount 2>&1 | _filter_scratch | _filter_ending_dot
@@ -103,7 +105,7 @@ _scratch_unmount 2>&1 | _filter_scratch | _filter_ending_dot
# data recovery hack.
#
echo "mounting filesystem with -o norecovery on a read-only device:"
-_try_scratch_mount -o norecovery 2>&1 | _filter_ro_mount
+_try_scratch_mount -o norecovery 2>&1 | _filter_ro_mount | _filter_scratch
echo "unmounting read-only filesystem"
_scratch_unmount 2>&1 | _filter_scratch | _filter_ending_dot
diff --git a/tests/generic/050.out.xfsquota b/tests/generic/050.out.xfsquota
index f204bd2f..35d7bd68 100644
--- a/tests/generic/050.out.xfsquota
+++ b/tests/generic/050.out.xfsquota
@@ -1,8 +1,7 @@
QA output created by 050
setting device read-only
mounting read-only block device:
-mount: /mnt-scratch: permission denied
-touching file on read-only filesystem (should fail)
+mount: SCRATCH_MNT: permission denied
unmounting read-only filesystem
umount: SCRATCH_DEV: not mounted
setting device read-write
@@ -17,7 +16,7 @@ mount: cannot mount device read-only
unmounting read-only filesystem
umount: SCRATCH_DEV: not mounted
mounting filesystem with -o norecovery on a read-only device:
-mount: /mnt-scratch: permission denied
+mount: SCRATCH_MNT: permission denied
unmounting read-only filesystem
umount: SCRATCH_DEV: not mounted
setting device read-write
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH v2] generic/050: fix xfsquota configuration failures
2019-11-27 16:34 [PATCH v2] generic/050: fix xfsquota configuration failures Darrick J. Wong
@ 2019-11-28 11:01 ` Jan Kara
2019-12-01 3:35 ` Eryu Guan
1 sibling, 0 replies; 3+ messages in thread
From: Jan Kara @ 2019-11-28 11:01 UTC (permalink / raw)
To: Darrick J. Wong; +Cc: Eryu Guan, fstests, xfs, Jan Kara
On Wed 27-11-19 08:34:57, Darrick J. Wong wrote:
> From: Darrick J. Wong <darrick.wong@oracle.com>
>
> The new 'xfsquota' configuration for generic/050 doesn't filter out
> SCRATCH_MNT properly and seems to be missing an error message in the
> golden output. Fix both of these problems.
>
> Fixes: e088479871 ("generic/050: Handle xfs quota special case with different output")
> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Thanks! The patch looks good to me. You can add:
Reviewed-by: Jan Kara <jack@suse.cz>
Honza
> ---
> v2: don't try the touch if the mount fails
> ---
> tests/generic/050 | 12 +++++++-----
> tests/generic/050.out.xfsquota | 5 ++---
> 2 files changed, 9 insertions(+), 8 deletions(-)
>
> diff --git a/tests/generic/050 b/tests/generic/050
> index cf2b9381..7eabc7a7 100755
> --- a/tests/generic/050
> +++ b/tests/generic/050
> @@ -58,9 +58,11 @@ blockdev --setro $SCRATCH_DEV
> # Mount it, and make sure we can't write to it, and we can unmount it again
> #
> echo "mounting read-only block device:"
> -_try_scratch_mount 2>&1 | _filter_ro_mount
> -echo "touching file on read-only filesystem (should fail)"
> -touch $SCRATCH_MNT/foo 2>&1 | _filter_scratch
> +_try_scratch_mount 2>&1 | _filter_ro_mount | _filter_scratch
> +if [ "${PIPESTATUS[0]}" -eq 0 ]; then
> + echo "touching file on read-only filesystem (should fail)"
> + touch $SCRATCH_MNT/foo 2>&1 | _filter_scratch
> +fi
>
> #
> # Apparently this used to be broken at some point:
> @@ -92,7 +94,7 @@ blockdev --setro $SCRATCH_DEV
> # -o norecovery is used.
> #
> echo "mounting filesystem that needs recovery on a read-only device:"
> -_try_scratch_mount 2>&1 | _filter_ro_mount
> +_try_scratch_mount 2>&1 | _filter_ro_mount | _filter_scratch
>
> echo "unmounting read-only filesystem"
> _scratch_unmount 2>&1 | _filter_scratch | _filter_ending_dot
> @@ -103,7 +105,7 @@ _scratch_unmount 2>&1 | _filter_scratch | _filter_ending_dot
> # data recovery hack.
> #
> echo "mounting filesystem with -o norecovery on a read-only device:"
> -_try_scratch_mount -o norecovery 2>&1 | _filter_ro_mount
> +_try_scratch_mount -o norecovery 2>&1 | _filter_ro_mount | _filter_scratch
> echo "unmounting read-only filesystem"
> _scratch_unmount 2>&1 | _filter_scratch | _filter_ending_dot
>
> diff --git a/tests/generic/050.out.xfsquota b/tests/generic/050.out.xfsquota
> index f204bd2f..35d7bd68 100644
> --- a/tests/generic/050.out.xfsquota
> +++ b/tests/generic/050.out.xfsquota
> @@ -1,8 +1,7 @@
> QA output created by 050
> setting device read-only
> mounting read-only block device:
> -mount: /mnt-scratch: permission denied
> -touching file on read-only filesystem (should fail)
> +mount: SCRATCH_MNT: permission denied
> unmounting read-only filesystem
> umount: SCRATCH_DEV: not mounted
> setting device read-write
> @@ -17,7 +16,7 @@ mount: cannot mount device read-only
> unmounting read-only filesystem
> umount: SCRATCH_DEV: not mounted
> mounting filesystem with -o norecovery on a read-only device:
> -mount: /mnt-scratch: permission denied
> +mount: SCRATCH_MNT: permission denied
> unmounting read-only filesystem
> umount: SCRATCH_DEV: not mounted
> setting device read-write
--
Jan Kara <jack@suse.com>
SUSE Labs, CR
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH v2] generic/050: fix xfsquota configuration failures
2019-11-27 16:34 [PATCH v2] generic/050: fix xfsquota configuration failures Darrick J. Wong
2019-11-28 11:01 ` Jan Kara
@ 2019-12-01 3:35 ` Eryu Guan
1 sibling, 0 replies; 3+ messages in thread
From: Eryu Guan @ 2019-12-01 3:35 UTC (permalink / raw)
To: Darrick J. Wong; +Cc: fstests, xfs, Jan Kara
On Wed, Nov 27, 2019 at 08:34:57AM -0800, Darrick J. Wong wrote:
> From: Darrick J. Wong <darrick.wong@oracle.com>
>
> The new 'xfsquota' configuration for generic/050 doesn't filter out
> SCRATCH_MNT properly and seems to be missing an error message in the
> golden output. Fix both of these problems.
>
> Fixes: e088479871 ("generic/050: Handle xfs quota special case with different output")
> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Thanks for the fix! And sorry for not noticing such test failure. I did
test xfs/050 but apparently I forget to enable xfsquota..
Thanks!
Eryu
> ---
> v2: don't try the touch if the mount fails
> ---
> tests/generic/050 | 12 +++++++-----
> tests/generic/050.out.xfsquota | 5 ++---
> 2 files changed, 9 insertions(+), 8 deletions(-)
>
> diff --git a/tests/generic/050 b/tests/generic/050
> index cf2b9381..7eabc7a7 100755
> --- a/tests/generic/050
> +++ b/tests/generic/050
> @@ -58,9 +58,11 @@ blockdev --setro $SCRATCH_DEV
> # Mount it, and make sure we can't write to it, and we can unmount it again
> #
> echo "mounting read-only block device:"
> -_try_scratch_mount 2>&1 | _filter_ro_mount
> -echo "touching file on read-only filesystem (should fail)"
> -touch $SCRATCH_MNT/foo 2>&1 | _filter_scratch
> +_try_scratch_mount 2>&1 | _filter_ro_mount | _filter_scratch
> +if [ "${PIPESTATUS[0]}" -eq 0 ]; then
> + echo "touching file on read-only filesystem (should fail)"
> + touch $SCRATCH_MNT/foo 2>&1 | _filter_scratch
> +fi
>
> #
> # Apparently this used to be broken at some point:
> @@ -92,7 +94,7 @@ blockdev --setro $SCRATCH_DEV
> # -o norecovery is used.
> #
> echo "mounting filesystem that needs recovery on a read-only device:"
> -_try_scratch_mount 2>&1 | _filter_ro_mount
> +_try_scratch_mount 2>&1 | _filter_ro_mount | _filter_scratch
>
> echo "unmounting read-only filesystem"
> _scratch_unmount 2>&1 | _filter_scratch | _filter_ending_dot
> @@ -103,7 +105,7 @@ _scratch_unmount 2>&1 | _filter_scratch | _filter_ending_dot
> # data recovery hack.
> #
> echo "mounting filesystem with -o norecovery on a read-only device:"
> -_try_scratch_mount -o norecovery 2>&1 | _filter_ro_mount
> +_try_scratch_mount -o norecovery 2>&1 | _filter_ro_mount | _filter_scratch
> echo "unmounting read-only filesystem"
> _scratch_unmount 2>&1 | _filter_scratch | _filter_ending_dot
>
> diff --git a/tests/generic/050.out.xfsquota b/tests/generic/050.out.xfsquota
> index f204bd2f..35d7bd68 100644
> --- a/tests/generic/050.out.xfsquota
> +++ b/tests/generic/050.out.xfsquota
> @@ -1,8 +1,7 @@
> QA output created by 050
> setting device read-only
> mounting read-only block device:
> -mount: /mnt-scratch: permission denied
> -touching file on read-only filesystem (should fail)
> +mount: SCRATCH_MNT: permission denied
> unmounting read-only filesystem
> umount: SCRATCH_DEV: not mounted
> setting device read-write
> @@ -17,7 +16,7 @@ mount: cannot mount device read-only
> unmounting read-only filesystem
> umount: SCRATCH_DEV: not mounted
> mounting filesystem with -o norecovery on a read-only device:
> -mount: /mnt-scratch: permission denied
> +mount: SCRATCH_MNT: permission denied
> unmounting read-only filesystem
> umount: SCRATCH_DEV: not mounted
> setting device read-write
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2019-12-01 3:35 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-11-27 16:34 [PATCH v2] generic/050: fix xfsquota configuration failures Darrick J. Wong
2019-11-28 11:01 ` Jan Kara
2019-12-01 3:35 ` Eryu Guan
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).