From: John Garry <john.g.garry@oracle.com>
To: axboe@kernel.dk, kbusch@kernel.org, hch@lst.de, sagi@grimberg.me,
jejb@linux.ibm.com, martin.petersen@oracle.com,
djwong@kernel.org, viro@zeniv.linux.org.uk, brauner@kernel.org,
chandan.babu@oracle.com, dchinner@redhat.com
Cc: linux-block@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-nvme@lists.infradead.org, linux-xfs@vger.kernel.org,
linux-fsdevel@vger.kernel.org, tytso@mit.edu, jbongio@google.com,
linux-api@vger.kernel.org, John Garry <john.g.garry@oracle.com>
Subject: [PATCH 15/21] fs: xfs: Support atomic write for statx
Date: Fri, 29 Sep 2023 10:27:20 +0000 [thread overview]
Message-ID: <20230929102726.2985188-16-john.g.garry@oracle.com> (raw)
In-Reply-To: <20230929102726.2985188-1-john.g.garry@oracle.com>
Support providing info on atomic write unit min and max for an inode.
For simplicity, currently we limit the min at the FS block size, but a
lower limit could be supported in future.
The atomic write unit min and max is limited by the guaranteed extent
alignment for the inode.
Signed-off-by: John Garry <john.g.garry@oracle.com>
---
fs/xfs/xfs_iops.c | 51 +++++++++++++++++++++++++++++++++++++++++++++++
fs/xfs/xfs_iops.h | 4 ++++
2 files changed, 55 insertions(+)
diff --git a/fs/xfs/xfs_iops.c b/fs/xfs/xfs_iops.c
index 1c1e6171209d..5bff80748223 100644
--- a/fs/xfs/xfs_iops.c
+++ b/fs/xfs/xfs_iops.c
@@ -546,6 +546,46 @@ xfs_stat_blksize(
return PAGE_SIZE;
}
+void xfs_ip_atomic_write_attr(struct xfs_inode *ip,
+ xfs_filblks_t *unit_min_fsb,
+ xfs_filblks_t *unit_max_fsb)
+{
+ xfs_extlen_t extsz_hint = xfs_get_extsz_hint(ip);
+ struct xfs_buftarg *target = xfs_inode_buftarg(ip);
+ struct block_device *bdev = target->bt_bdev;
+ struct xfs_mount *mp = ip->i_mount;
+ xfs_filblks_t atomic_write_unit_min,
+ atomic_write_unit_max,
+ align;
+
+ atomic_write_unit_min = XFS_B_TO_FSB(mp,
+ queue_atomic_write_unit_min_bytes(bdev->bd_queue));
+ atomic_write_unit_max = XFS_B_TO_FSB(mp,
+ queue_atomic_write_unit_max_bytes(bdev->bd_queue));
+
+ /* for RT, unset extsize gives hint of 1 */
+ /* for !RT, unset extsize gives hint of 0 */
+ if (extsz_hint && (XFS_IS_REALTIME_INODE(ip) ||
+ (ip->i_diflags2 & XFS_DIFLAG2_FORCEALIGN)))
+ align = extsz_hint;
+ else
+ align = 1;
+
+ if (atomic_write_unit_max == 0) {
+ *unit_min_fsb = 0;
+ *unit_max_fsb = 0;
+ } else if (atomic_write_unit_min == 0) {
+ *unit_min_fsb = 1;
+ *unit_max_fsb = min_t(xfs_filblks_t, atomic_write_unit_max,
+ align);
+ } else {
+ *unit_min_fsb = min_t(xfs_filblks_t, atomic_write_unit_min,
+ align);
+ *unit_max_fsb = min_t(xfs_filblks_t, atomic_write_unit_max,
+ align);
+ }
+}
+
STATIC int
xfs_vn_getattr(
struct mnt_idmap *idmap,
@@ -614,6 +654,17 @@ xfs_vn_getattr(
stat->dio_mem_align = bdev_dma_alignment(bdev) + 1;
stat->dio_offset_align = bdev_logical_block_size(bdev);
}
+ if (request_mask & STATX_WRITE_ATOMIC) {
+ xfs_filblks_t unit_min_fsb, unit_max_fsb;
+
+ xfs_ip_atomic_write_attr(ip, &unit_min_fsb,
+ &unit_max_fsb);
+ stat->atomic_write_unit_min = XFS_FSB_TO_B(mp, unit_min_fsb);
+ stat->atomic_write_unit_max = XFS_FSB_TO_B(mp, unit_max_fsb);
+ stat->attributes |= STATX_ATTR_WRITE_ATOMIC;
+ stat->attributes_mask |= STATX_ATTR_WRITE_ATOMIC;
+ stat->result_mask |= STATX_WRITE_ATOMIC;
+ }
fallthrough;
default:
stat->blksize = xfs_stat_blksize(ip);
diff --git a/fs/xfs/xfs_iops.h b/fs/xfs/xfs_iops.h
index 7f84a0843b24..b1e683b04301 100644
--- a/fs/xfs/xfs_iops.h
+++ b/fs/xfs/xfs_iops.h
@@ -19,4 +19,8 @@ int xfs_vn_setattr_size(struct mnt_idmap *idmap,
int xfs_inode_init_security(struct inode *inode, struct inode *dir,
const struct qstr *qstr);
+void xfs_ip_atomic_write_attr(struct xfs_inode *ip,
+ xfs_filblks_t *unit_min_fsb,
+ xfs_filblks_t *unit_max_fsb);
+
#endif /* __XFS_IOPS_H__ */
--
2.31.1
next prev parent reply other threads:[~2023-09-29 10:29 UTC|newest]
Thread overview: 124+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-09-29 10:27 [PATCH 00/21] block atomic writes John Garry
2023-09-29 10:27 ` [PATCH 01/21] block: Add atomic write operations to request_queue limits John Garry
2023-10-03 16:40 ` Bart Van Assche
2023-10-04 3:00 ` Martin K. Petersen
2023-10-04 17:28 ` Bart Van Assche
2023-10-04 18:26 ` Martin K. Petersen
2023-10-04 21:00 ` Bart Van Assche
2023-10-05 8:22 ` John Garry
2023-11-09 15:10 ` Christoph Hellwig
2023-11-09 17:01 ` John Garry
2023-11-10 6:23 ` Christoph Hellwig
2023-11-10 9:04 ` John Garry
2023-09-29 10:27 ` [PATCH 02/21] block: Limit atomic writes according to bio and queue limits John Garry
2023-11-09 15:13 ` Christoph Hellwig
2023-11-09 17:41 ` John Garry
2023-12-04 3:19 ` Ming Lei
2023-12-04 3:55 ` Ming Lei
2023-12-04 9:35 ` John Garry
2023-09-29 10:27 ` [PATCH 03/21] fs/bdev: Add atomic write support info to statx John Garry
2023-09-29 22:49 ` Eric Biggers
2023-10-01 13:23 ` Bart Van Assche
2023-10-02 9:51 ` John Garry
2023-10-02 18:39 ` Bart Van Assche
2023-10-03 0:28 ` Martin K. Petersen
2023-11-09 15:15 ` Christoph Hellwig
2023-10-03 1:51 ` Dave Chinner
2023-10-03 2:57 ` Darrick J. Wong
2023-10-03 7:23 ` John Garry
2023-10-03 15:46 ` Darrick J. Wong
2023-10-04 14:19 ` John Garry
2023-09-29 10:27 ` [PATCH 04/21] fs: Add RWF_ATOMIC and IOCB_ATOMIC flags for atomic write support John Garry
2023-10-06 18:15 ` Jeremy Bongio
2023-10-09 22:02 ` Dave Chinner
2023-09-29 10:27 ` [PATCH 05/21] block: Add REQ_ATOMIC flag John Garry
2023-09-29 10:27 ` [PATCH 06/21] block: Pass blk_queue_get_max_sectors() a request pointer John Garry
2023-09-29 10:27 ` [PATCH 07/21] block: Limit atomic write IO size according to atomic_write_max_sectors John Garry
2023-09-29 10:27 ` [PATCH 08/21] block: Error an attempt to split an atomic write bio John Garry
2023-09-29 10:27 ` [PATCH 09/21] block: Add checks to merging of atomic writes John Garry
2023-09-30 13:40 ` kernel test robot
2023-10-02 22:50 ` Nathan Chancellor
2023-10-04 11:40 ` John Garry
2023-09-29 10:27 ` [PATCH 10/21] block: Add fops atomic write support John Garry
2023-09-29 17:51 ` Bart Van Assche
2023-10-02 10:10 ` John Garry
2023-10-02 19:12 ` Bart Van Assche
2023-10-03 0:48 ` Martin K. Petersen
2023-10-03 16:55 ` Bart Van Assche
2023-10-04 2:53 ` Martin K. Petersen
2023-10-04 17:22 ` Bart Van Assche
2023-10-04 18:17 ` Martin K. Petersen
2023-10-05 17:10 ` Bart Van Assche
2023-10-05 22:36 ` Dave Chinner
2023-10-05 22:58 ` Bart Van Assche
2023-10-06 4:31 ` Dave Chinner
2023-10-06 17:22 ` Bart Van Assche
2023-10-07 1:21 ` Martin K. Petersen
2023-10-03 8:37 ` John Garry
2023-10-03 16:45 ` Bart Van Assche
2023-10-04 9:14 ` John Garry
2023-10-04 17:34 ` Bart Van Assche
2023-10-04 21:59 ` Dave Chinner
2023-12-04 2:30 ` Ming Lei
2023-12-04 9:27 ` John Garry
2023-12-04 12:18 ` Ming Lei
2023-12-04 13:13 ` John Garry
2023-12-05 1:45 ` Ming Lei
2023-12-05 10:49 ` John Garry
2023-09-29 10:27 ` [PATCH 11/21] fs: xfs: Don't use low-space allocator for alignment > 1 John Garry
2023-10-03 1:16 ` Dave Chinner
2023-10-03 3:00 ` Darrick J. Wong
2023-10-03 4:34 ` Dave Chinner
2023-10-03 10:22 ` John Garry
2023-09-29 10:27 ` [PATCH 12/21] fs: xfs: Introduce FORCEALIGN inode flag John Garry
2023-11-09 15:24 ` Christoph Hellwig
2023-09-29 10:27 ` [PATCH 13/21] fs: xfs: Make file data allocations observe the 'forcealign' flag John Garry
2023-10-03 1:42 ` Dave Chinner
2023-10-03 10:13 ` John Garry
2023-09-29 10:27 ` [PATCH 14/21] fs: xfs: Enable file data forcealign feature John Garry
2023-09-29 10:27 ` John Garry [this message]
2023-10-03 3:32 ` [PATCH 15/21] fs: xfs: Support atomic write for statx Dave Chinner
2023-10-03 10:56 ` John Garry
2023-10-03 16:10 ` Darrick J. Wong
2023-09-29 10:27 ` [PATCH 16/21] fs: iomap: Atomic write support John Garry
2023-10-03 4:24 ` Dave Chinner
2023-10-03 12:55 ` John Garry
2023-10-03 16:47 ` Darrick J. Wong
2023-10-04 1:16 ` Dave Chinner
2023-10-24 12:59 ` John Garry
2023-09-29 10:27 ` [PATCH 17/21] fs: xfs: iomap atomic " John Garry
2023-11-09 15:26 ` Christoph Hellwig
2023-11-10 10:42 ` John Garry
2023-11-28 8:56 ` John Garry
2023-11-28 13:56 ` Christoph Hellwig
2023-11-28 17:42 ` John Garry
2023-11-29 2:45 ` Martin K. Petersen
2023-12-04 13:45 ` Christoph Hellwig
2023-12-04 15:19 ` John Garry
2023-12-04 15:39 ` Christoph Hellwig
2023-12-04 18:06 ` John Garry
2023-12-05 4:55 ` Theodore Ts'o
2023-12-05 11:09 ` John Garry
2023-12-05 13:59 ` Ming Lei
2023-09-29 10:27 ` [PATCH 18/21] scsi: sd: Support reading atomic properties from block limits VPD John Garry
2023-09-29 17:54 ` Bart Van Assche
2023-10-02 11:27 ` John Garry
2023-10-06 17:52 ` Bart Van Assche
2023-10-06 23:48 ` Martin K. Petersen
2023-09-29 10:27 ` [PATCH 19/21] scsi: sd: Add WRITE_ATOMIC_16 support John Garry
2023-09-29 17:59 ` Bart Van Assche
2023-10-02 11:36 ` John Garry
2023-10-02 19:21 ` Bart Van Assche
2023-09-29 10:27 ` [PATCH 20/21] scsi: scsi_debug: Atomic write support John Garry
2023-09-29 10:27 ` [PATCH 21/21] nvme: Support atomic writes John Garry
[not found] ` <CGME20231004113943eucas1p23a51ce5ef06c36459f826101bb7b85fc@eucas1p2.samsung.com>
2023-10-04 11:39 ` Pankaj Raghav
2023-10-05 10:24 ` John Garry
2023-10-05 13:32 ` Pankaj Raghav
2023-10-05 15:05 ` John Garry
2023-11-09 15:36 ` Christoph Hellwig
2023-11-09 15:42 ` Matthew Wilcox
2023-11-09 15:46 ` Christoph Hellwig
2023-11-09 19:08 ` John Garry
2023-11-10 6:29 ` Christoph Hellwig
2023-11-10 8:44 ` John Garry
2023-09-29 14:58 ` [PATCH 00/21] block " Bart Van Assche
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230929102726.2985188-16-john.g.garry@oracle.com \
--to=john.g.garry@oracle.com \
--cc=axboe@kernel.dk \
--cc=brauner@kernel.org \
--cc=chandan.babu@oracle.com \
--cc=dchinner@redhat.com \
--cc=djwong@kernel.org \
--cc=hch@lst.de \
--cc=jbongio@google.com \
--cc=jejb@linux.ibm.com \
--cc=kbusch@kernel.org \
--cc=linux-api@vger.kernel.org \
--cc=linux-block@vger.kernel.org \
--cc=linux-fsdevel@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-nvme@lists.infradead.org \
--cc=linux-xfs@vger.kernel.org \
--cc=martin.petersen@oracle.com \
--cc=sagi@grimberg.me \
--cc=tytso@mit.edu \
--cc=viro@zeniv.linux.org.uk \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).