From: Christophe Leroy <christophe.leroy@c-s.fr>
To: Benjamin Herrenschmidt <benh@kernel.crashing.org>,
Paul Mackerras <paulus@samba.org>,
Michael Ellerman <mpe@ellerman.id.au>,
oss@buserror.net
Cc: linuxppc-dev@lists.ozlabs.org, linux-kernel@vger.kernel.org
Subject: [PATCH v3 01/10] powerpc/8xx: move CPM1 related files from sysdev/ to platforms/8xx
Date: Fri, 14 Jun 2019 06:41:38 +0000 (UTC) [thread overview]
Message-ID: <04852442b540e73be0a20e13f69ab8427fd102e0.1560494348.git.christophe.leroy@c-s.fr> (raw)
Only 8xx selects CPM1 and related CONFIG options are already
in platforms/8xx/Kconfig
Move the related C files to platforms/8xx/.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
---
v3: cpm_gpio is also used by CPM2, so it has to remain in sysdev for now ; no change to other patches of the series.
v2: added several patches in the series to clean up the microcode patching.
arch/powerpc/platforms/8xx/Makefile | 2 ++
arch/powerpc/{sysdev => platforms/8xx}/cpm1.c | 0
arch/powerpc/{sysdev => platforms/8xx}/micropatch.c | 0
arch/powerpc/sysdev/Makefile | 2 --
4 files changed, 2 insertions(+), 2 deletions(-)
rename arch/powerpc/{sysdev => platforms/8xx}/cpm1.c (100%)
rename arch/powerpc/{sysdev => platforms/8xx}/micropatch.c (100%)
diff --git a/arch/powerpc/platforms/8xx/Makefile b/arch/powerpc/platforms/8xx/Makefile
index 708ab099e886..27a7c6f828e0 100644
--- a/arch/powerpc/platforms/8xx/Makefile
+++ b/arch/powerpc/platforms/8xx/Makefile
@@ -3,6 +3,8 @@
# Makefile for the PowerPC 8xx linux kernel.
#
obj-y += m8xx_setup.o machine_check.o pic.o
+obj-$(CONFIG_CPM1) += cpm1.o
+obj-$(CONFIG_UCODE_PATCH) += micropatch.o
obj-$(CONFIG_MPC885ADS) += mpc885ads_setup.o
obj-$(CONFIG_MPC86XADS) += mpc86xads_setup.o
obj-$(CONFIG_PPC_EP88XC) += ep88xc.o
diff --git a/arch/powerpc/sysdev/cpm1.c b/arch/powerpc/platforms/8xx/cpm1.c
similarity index 100%
rename from arch/powerpc/sysdev/cpm1.c
rename to arch/powerpc/platforms/8xx/cpm1.c
diff --git a/arch/powerpc/sysdev/micropatch.c b/arch/powerpc/platforms/8xx/micropatch.c
similarity index 100%
rename from arch/powerpc/sysdev/micropatch.c
rename to arch/powerpc/platforms/8xx/micropatch.c
diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile
index aaf23283ba0c..9d73dfddf060 100644
--- a/arch/powerpc/sysdev/Makefile
+++ b/arch/powerpc/sysdev/Makefile
@@ -37,12 +37,10 @@ obj-$(CONFIG_XILINX_PCI) += xilinx_pci.o
obj-$(CONFIG_OF_RTC) += of_rtc.o
obj-$(CONFIG_CPM) += cpm_common.o
-obj-$(CONFIG_CPM1) += cpm1.o
obj-$(CONFIG_CPM2) += cpm2.o cpm2_pic.o cpm_gpio.o
obj-$(CONFIG_8xx_GPIO) += cpm_gpio.o
obj-$(CONFIG_QUICC_ENGINE) += cpm_common.o
obj-$(CONFIG_PPC_DCR) += dcr.o
-obj-$(CONFIG_UCODE_PATCH) += micropatch.o
obj-$(CONFIG_PPC_MPC512x) += mpc5xxx_clocks.o
obj-$(CONFIG_PPC_MPC52xx) += mpc5xxx_clocks.o
--
2.13.3
next reply other threads:[~2019-06-14 6:45 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-06-14 6:41 Christophe Leroy [this message]
2019-06-14 6:41 ` [PATCH v3 02/10] powerpc/8xx: drop verify_patch() Christophe Leroy
2019-06-14 6:41 ` [PATCH v3 03/10] powerpc/8xx: compact microcode arrays Christophe Leroy
2019-06-14 6:41 ` [PATCH v3 04/10] powerpc/8xx: refactor writing of CPM " Christophe Leroy
2019-06-14 6:41 ` [PATCH v3 05/10] powerpc/8xx: Refactor microcode write Christophe Leroy
2019-06-14 6:41 ` [PATCH v3 06/10] powerpc/8xx: refactor printing of microcode patch name Christophe Leroy
2019-06-14 6:41 ` [PATCH v3 07/10] powerpc/8xx: refactor programming of microcode CPM params Christophe Leroy
2019-06-14 6:41 ` [PATCH v3 08/10] powerpc/8xx: replace #ifdefs by IS_ENABLED() in microcode.c Christophe Leroy
2019-06-14 6:41 ` [PATCH v3 09/10] powerpc/8xx: Use IO accessors in microcode programming Christophe Leroy
2019-06-14 6:41 ` [PATCH v3 10/10] powerpc/8xx: Add microcode patch to move SMC parameter RAM Christophe Leroy
2019-07-08 1:19 ` [PATCH v3 01/10] powerpc/8xx: move CPM1 related files from sysdev/ to platforms/8xx Michael Ellerman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=04852442b540e73be0a20e13f69ab8427fd102e0.1560494348.git.christophe.leroy@c-s.fr \
--to=christophe.leroy@c-s.fr \
--cc=benh@kernel.crashing.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=mpe@ellerman.id.au \
--cc=oss@buserror.net \
--cc=paulus@samba.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).