linuxppc-dev.lists.ozlabs.org archive mirror
 help / color / mirror / Atom feed
From: Christophe Leroy <christophe.leroy@c-s.fr>
To: Benjamin Herrenschmidt <benh@kernel.crashing.org>,
	Paul Mackerras <paulus@samba.org>,
	Michael Ellerman <mpe@ellerman.id.au>,
	 oss@buserror.net
Cc: linuxppc-dev@lists.ozlabs.org, linux-kernel@vger.kernel.org
Subject: [PATCH v3 08/10] powerpc/8xx: replace #ifdefs by IS_ENABLED() in microcode.c
Date: Fri, 14 Jun 2019 06:41:45 +0000 (UTC)	[thread overview]
Message-ID: <4537c9b06cec9599ba2c3162ed7fbb6ce085d04b.1560494349.git.christophe.leroy@c-s.fr> (raw)
In-Reply-To: <04852442b540e73be0a20e13f69ab8427fd102e0.1560494348.git.christophe.leroy@c-s.fr>

Reduce #ifdef mess by using IS_ENABLED() instead.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
---
 arch/powerpc/platforms/8xx/micropatch.c | 33 +++++++++++++--------------------
 1 file changed, 13 insertions(+), 20 deletions(-)

diff --git a/arch/powerpc/platforms/8xx/micropatch.c b/arch/powerpc/platforms/8xx/micropatch.c
index 02490c54ebac..252db7c90599 100644
--- a/arch/powerpc/platforms/8xx/micropatch.c
+++ b/arch/powerpc/platforms/8xx/micropatch.c
@@ -243,14 +243,9 @@ static void __init cpm_write_patch(cpm8xx_t *cp, int offset, uint *patch, int le
 void __init cpm_load_patch(cpm8xx_t *cp)
 {
 	volatile cpm8xx_t	*commproc;
-#if defined(CONFIG_I2C_SPI_UCODE_PATCH) || \
-    defined(CONFIG_I2C_SPI_SMC1_UCODE_PATCH)
 	volatile iic_t		*iip;
 	volatile struct spi_pram *spp;
-#ifdef CONFIG_I2C_SPI_SMC1_UCODE_PATCH
 	volatile smc_uart_t	*smp;
-#endif
-#endif
 	commproc = cp;
 
 	commproc->cp_rccr = 0;
@@ -259,24 +254,22 @@ void __init cpm_load_patch(cpm8xx_t *cp)
 	cpm_write_patch(cp, 0xf00, patch_2f00, sizeof(patch_2f00));
 	cpm_write_patch(cp, 0xe00, patch_2e00, sizeof(patch_2e00));
 
-#if defined(CONFIG_I2C_SPI_UCODE_PATCH) || \
-    defined(CONFIG_I2C_SPI_SMC1_UCODE_PATCH)
-
-	iip = (iic_t *)&commproc->cp_dparam[PROFF_IIC];
-# define RPBASE 0x0500
-	iip->iic_rpbase = RPBASE;
+	if (IS_ENABLED(CONFIG_I2C_SPI_UCODE_PATCH) ||
+	    IS_ENABLED(CONFIG_I2C_SPI_SMC1_UCODE_PATCH)) {
+		u16 rpbase = 0x500;
 
-	/* Put SPI above the IIC, also 32-byte aligned.
-	*/
-	spp = (struct spi_pram *)&commproc->cp_dparam[PROFF_SPI];
-	spp->rpbase = (RPBASE + sizeof(iic_t) + 31) & ~31;
+		iip = (iic_t *)&commproc->cp_dparam[PROFF_IIC];
+		iip->iic_rpbase = rpbase;
 
-# if defined(CONFIG_I2C_SPI_SMC1_UCODE_PATCH)
-	smp = (smc_uart_t *)&commproc->cp_dparam[PROFF_SMC1];
-	smp->smc_rpbase = 0x1FC0;
-# endif /* CONFIG_I2C_SPI_SMC1_UCODE_PATCH) */
+		/* Put SPI above the IIC, also 32-byte aligned. */
+		spp = (struct spi_pram *)&commproc->cp_dparam[PROFF_SPI];
+		spp->rpbase = (rpbase + sizeof(iic_t) + 31) & ~31;
 
-#endif /* some variation of the I2C/SPI patch was selected */
+		if (IS_ENABLED(CONFIG_I2C_SPI_SMC1_UCODE_PATCH)) {
+			smp = (smc_uart_t *)&commproc->cp_dparam[PROFF_SMC1];
+			smp->smc_rpbase = 0x1FC0;
+		}
+	}
 
 	commproc->cp_cpmcr1 = patch_params.cpmcr1;
 	commproc->cp_cpmcr2 = patch_params.cpmcr2;
-- 
2.13.3


  parent reply	other threads:[~2019-06-14  6:56 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-06-14  6:41 [PATCH v3 01/10] powerpc/8xx: move CPM1 related files from sysdev/ to platforms/8xx Christophe Leroy
2019-06-14  6:41 ` [PATCH v3 02/10] powerpc/8xx: drop verify_patch() Christophe Leroy
2019-06-14  6:41 ` [PATCH v3 03/10] powerpc/8xx: compact microcode arrays Christophe Leroy
2019-06-14  6:41 ` [PATCH v3 04/10] powerpc/8xx: refactor writing of CPM " Christophe Leroy
2019-06-14  6:41 ` [PATCH v3 05/10] powerpc/8xx: Refactor microcode write Christophe Leroy
2019-06-14  6:41 ` [PATCH v3 06/10] powerpc/8xx: refactor printing of microcode patch name Christophe Leroy
2019-06-14  6:41 ` [PATCH v3 07/10] powerpc/8xx: refactor programming of microcode CPM params Christophe Leroy
2019-06-14  6:41 ` Christophe Leroy [this message]
2019-06-14  6:41 ` [PATCH v3 09/10] powerpc/8xx: Use IO accessors in microcode programming Christophe Leroy
2019-06-14  6:41 ` [PATCH v3 10/10] powerpc/8xx: Add microcode patch to move SMC parameter RAM Christophe Leroy
2019-07-08  1:19 ` [PATCH v3 01/10] powerpc/8xx: move CPM1 related files from sysdev/ to platforms/8xx Michael Ellerman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4537c9b06cec9599ba2c3162ed7fbb6ce085d04b.1560494349.git.christophe.leroy@c-s.fr \
    --to=christophe.leroy@c-s.fr \
    --cc=benh@kernel.crashing.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=mpe@ellerman.id.au \
    --cc=oss@buserror.net \
    --cc=paulus@samba.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).