* [PATCH 01/11] powerpc/85xx: Add 'fsl, pq3-gpio' compatiable for GPIO driver
@ 2011-10-22 21:20 Kumar Gala
2011-10-22 21:20 ` [PATCH 02/11] powerpc/85xx: Simplify P1020RDB CAMP dts using includes Kumar Gala
2011-11-03 17:59 ` [PATCH 01/11] powerpc/85xx: Add 'fsl, pq3-gpio' compatiable for GPIO driver Kumar Gala
0 siblings, 2 replies; 19+ messages in thread
From: Kumar Gala @ 2011-10-22 21:20 UTC (permalink / raw)
To: linuxppc-dev
Support MPC85xx platforms outside of MPC8572/MPC8536. The
MPC8572/MPC8536 have an erratum that is worked around based on having
"fsl,mpc8572-gpio" in the compatiable list. All other MPC85xx SoCs
don't require this workaround and thus utilize the 'fsl,pq3-gpio'
compatiable.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
drivers/gpio/gpio-mpc8xxx.c | 1 +
1 files changed, 1 insertions(+), 0 deletions(-)
diff --git a/drivers/gpio/gpio-mpc8xxx.c b/drivers/gpio/gpio-mpc8xxx.c
index fb4963a..d74d19b 100644
--- a/drivers/gpio/gpio-mpc8xxx.c
+++ b/drivers/gpio/gpio-mpc8xxx.c
@@ -310,6 +310,7 @@ static struct of_device_id mpc8xxx_gpio_ids[] __initdata = {
{ .compatible = "fsl,mpc8572-gpio", },
{ .compatible = "fsl,mpc8610-gpio", },
{ .compatible = "fsl,mpc5121-gpio", .data = mpc512x_irq_set_type, },
+ { .compatible = "fsl,pq3-gpio", },
{ .compatible = "fsl,qoriq-gpio", },
{}
};
--
1.7.3.4
^ permalink raw reply related [flat|nested] 19+ messages in thread
* [PATCH 02/11] powerpc/85xx: Simplify P1020RDB CAMP dts using includes
2011-10-22 21:20 [PATCH 01/11] powerpc/85xx: Add 'fsl, pq3-gpio' compatiable for GPIO driver Kumar Gala
@ 2011-10-22 21:20 ` Kumar Gala
2011-10-22 21:20 ` [PATCH 03/11] powerpc/85xx: Rework PCI nodes on P1020RDB Kumar Gala
2011-11-03 17:59 ` [PATCH 01/11] powerpc/85xx: Add 'fsl, pq3-gpio' compatiable for GPIO driver Kumar Gala
1 sibling, 1 reply; 19+ messages in thread
From: Kumar Gala @ 2011-10-22 21:20 UTC (permalink / raw)
To: linuxppc-dev
If we include the p1020rdb.dts instead of p1020si.dts we greatly reduce
duplication and maintenance. We can just list which devices are
disabled for the given core and mpic protected sources.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
arch/powerpc/boot/dts/p1020rdb_camp_core0.dts | 154 +------------------------
arch/powerpc/boot/dts/p1020rdb_camp_core1.dts | 11 +--
2 files changed, 4 insertions(+), 161 deletions(-)
diff --git a/arch/powerpc/boot/dts/p1020rdb_camp_core0.dts b/arch/powerpc/boot/dts/p1020rdb_camp_core0.dts
index f0bf7f4..41b4585 100644
--- a/arch/powerpc/boot/dts/p1020rdb_camp_core0.dts
+++ b/arch/powerpc/boot/dts/p1020rdb_camp_core0.dts
@@ -16,7 +16,7 @@
* option) any later version.
*/
-/include/ "p1020si.dtsi"
+/include/ "p1020rdb.dts"
/ {
model = "fsl,P1020RDB";
@@ -32,7 +32,7 @@
cpus {
PowerPC,P1020@1 {
- status = "disabled";
+ status = "disabled";
};
};
@@ -45,169 +45,19 @@
};
soc@ffe00000 {
- i2c@3000 {
- rtc@68 {
- compatible = "dallas,ds1339";
- reg = <0x68>;
- };
- };
-
serial1: serial@4600 {
status = "disabled";
};
- spi@7000 {
- fsl_m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,espi-flash";
- reg = <0>;
- linux,modalias = "fsl_m25p80";
- spi-max-frequency = <40000000>;
-
- partition@0 {
- /* 512KB for u-boot Bootloader Image */
- reg = <0x0 0x00080000>;
- label = "SPI (RO) U-Boot Image";
- read-only;
- };
-
- partition@80000 {
- /* 512KB for DTB Image */
- reg = <0x00080000 0x00080000>;
- label = "SPI (RO) DTB Image";
- read-only;
- };
-
- partition@100000 {
- /* 4MB for Linux Kernel Image */
- reg = <0x00100000 0x00400000>;
- label = "SPI (RO) Linux Kernel Image";
- read-only;
- };
-
- partition@500000 {
- /* 4MB for Compressed RFS Image */
- reg = <0x00500000 0x00400000>;
- label = "SPI (RO) Compressed RFS Image";
- read-only;
- };
-
- partition@900000 {
- /* 7MB for JFFS2 based RFS */
- reg = <0x00900000 0x00700000>;
- label = "SPI (RW) JFFS2 RFS";
- };
- };
- };
-
- mdio@24000 {
- phy0: ethernet-phy@0 {
- interrupt-parent = <&mpic>;
- interrupts = <3 1>;
- reg = <0x0>;
- };
- phy1: ethernet-phy@1 {
- interrupt-parent = <&mpic>;
- interrupts = <2 1>;
- reg = <0x1>;
- };
- };
-
- mdio@25000 {
- tbi0: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
enet0: ethernet@b0000 {
status = "disabled";
};
- enet1: ethernet@b1000 {
- phy-handle = <&phy0>;
- tbi-handle = <&tbi0>;
- phy-connection-type = "sgmii";
- };
-
- enet2: ethernet@b2000 {
- phy-handle = <&phy1>;
- phy-connection-type = "rgmii-id";
- };
-
- usb@22000 {
- phy_type = "ulpi";
- };
-
- /* USB2 is shared with localbus, so it must be disabled
- by default. We can't put 'status = "disabled";' here
- since U-Boot doesn't clear the status property when
- it enables USB2. OTOH, U-Boot does create a new node
- when there isn't any. So, just comment it out.
- usb@23000 {
- phy_type = "ulpi";
- };
- */
-
mpic: pic@40000 {
protected-sources = <
42 29 30 34 /* serial1, enet0-queue-group0 */
17 18 24 45 /* enet0-queue-group1, crypto */
>;
};
-
- };
-
- pci0: pcie@ffe09000 {
- ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
- 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0x0 0x0 0x1 &mpic 0x4 0x1
- 0000 0x0 0x0 0x2 &mpic 0x5 0x1
- 0000 0x0 0x0 0x3 &mpic 0x6 0x1
- 0000 0x0 0x0 0x4 &mpic 0x7 0x1
- >;
- pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- ranges = <0x2000000 0x0 0xa0000000
- 0x2000000 0x0 0xa0000000
- 0x0 0x20000000
-
- 0x1000000 0x0 0x0
- 0x1000000 0x0 0x0
- 0x0 0x100000>;
- };
- };
-
- pci1: pcie@ffe0a000 {
- ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
- 0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0x0 0x0 0x1 &mpic 0x0 0x1
- 0000 0x0 0x0 0x2 &mpic 0x1 0x1
- 0000 0x0 0x0 0x3 &mpic 0x2 0x1
- 0000 0x0 0x0 0x4 &mpic 0x3 0x1
- >;
- pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- ranges = <0x2000000 0x0 0x80000000
- 0x2000000 0x0 0x80000000
- 0x0 0x20000000
-
- 0x1000000 0x0 0x0
- 0x1000000 0x0 0x0
- 0x0 0x100000>;
- };
};
};
diff --git a/arch/powerpc/boot/dts/p1020rdb_camp_core1.dts b/arch/powerpc/boot/dts/p1020rdb_camp_core1.dts
index 6ec0220..5174538 100644
--- a/arch/powerpc/boot/dts/p1020rdb_camp_core1.dts
+++ b/arch/powerpc/boot/dts/p1020rdb_camp_core1.dts
@@ -15,7 +15,7 @@
* option) any later version.
*/
-/include/ "p1020si.dtsi"
+/include/ "p1020rdb.dts"
/ {
model = "fsl,P1020RDB";
@@ -28,7 +28,7 @@
cpus {
PowerPC,P1020@0 {
- status = "disabled";
+ status = "disabled";
};
};
@@ -85,12 +85,6 @@
status = "disabled";
};
- enet0: ethernet@b0000 {
- fixed-link = <1 1 1000 0 0>;
- phy-connection-type = "rgmii-id";
-
- };
-
enet1: ethernet@b1000 {
status = "disabled";
};
@@ -135,7 +129,6 @@
global-utilities@e0000 { //global utilities block
status = "disabled";
};
-
};
pci0: pcie@ffe09000 {
--
1.7.3.4
^ permalink raw reply related [flat|nested] 19+ messages in thread
* [PATCH 03/11] powerpc/85xx: Rework PCI nodes on P1020RDB
2011-10-22 21:20 ` [PATCH 02/11] powerpc/85xx: Simplify P1020RDB CAMP dts using includes Kumar Gala
@ 2011-10-22 21:20 ` Kumar Gala
2011-10-22 21:20 ` [PATCH 04/11] powerpc/85xx: Update SPI binding to match binding spec for P1020RDB Kumar Gala
2011-10-23 14:37 ` [PATCH 03/11] powerpc/85xx: Rework PCI nodes on P1020RDB Tabi Timur-B04825
0 siblings, 2 replies; 19+ messages in thread
From: Kumar Gala @ 2011-10-22 21:20 UTC (permalink / raw)
To: linuxppc-dev
* Move SoC specific details like irq mapping to SoC dtsi
* Update interrupt property to cover both error interrupt and PCIe
runtime interrupts
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
arch/powerpc/boot/dts/p1020rdb.dts | 26 +---------------------
arch/powerpc/boot/dts/p1020si.dtsi | 40 ++++++++++++++++++++++++++++++++---
2 files changed, 38 insertions(+), 28 deletions(-)
diff --git a/arch/powerpc/boot/dts/p1020rdb.dts b/arch/powerpc/boot/dts/p1020rdb.dts
index d6a8ae4..8b1a7ee 100644
--- a/arch/powerpc/boot/dts/p1020rdb.dts
+++ b/arch/powerpc/boot/dts/p1020rdb.dts
@@ -257,19 +257,8 @@
pci0: pcie@ffe09000 {
ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0x0 0x0 0x1 &mpic 0x4 0x1
- 0000 0x0 0x0 0x2 &mpic 0x5 0x1
- 0000 0x0 0x0 0x3 &mpic 0x6 0x1
- 0000 0x0 0x0 0x4 &mpic 0x7 0x1
- >;
+ reg = <0 0xffe09000 0 0x1000>;
pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
ranges = <0x2000000 0x0 0xa0000000
0x2000000 0x0 0xa0000000
0x0 0x20000000
@@ -281,21 +270,10 @@
};
pci1: pcie@ffe0a000 {
+ reg = <0 0xffe0a000 0 0x1000>;
ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0x0 0x0 0x1 &mpic 0x0 0x1
- 0000 0x0 0x0 0x2 &mpic 0x1 0x1
- 0000 0x0 0x0 0x3 &mpic 0x2 0x1
- 0000 0x0 0x0 0x4 &mpic 0x3 0x1
- >;
pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
ranges = <0x2000000 0x0 0x80000000
0x2000000 0x0 0x80000000
0x0 0x20000000
diff --git a/arch/powerpc/boot/dts/p1020si.dtsi b/arch/powerpc/boot/dts/p1020si.dtsi
index 5c5acb6..58f6b30 100644
--- a/arch/powerpc/boot/dts/p1020si.dtsi
+++ b/arch/powerpc/boot/dts/p1020si.dtsi
@@ -352,26 +352,58 @@
pci0: pcie@ffe09000 {
compatible = "fsl,mpc8548-pcie";
device_type = "pci";
- #interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
- reg = <0 0xffe09000 0 0x1000>;
bus-range = <0 255>;
clock-frequency = <33333333>;
interrupt-parent = <&mpic>;
interrupts = <16 2>;
+
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <16 2>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0x0 0x0 0x1 &mpic 0x4 0x1
+ 0000 0x0 0x0 0x2 &mpic 0x5 0x1
+ 0000 0x0 0x0 0x3 &mpic 0x6 0x1
+ 0000 0x0 0x0 0x4 &mpic 0x7 0x1
+ >;
+ };
+
};
pci1: pcie@ffe0a000 {
compatible = "fsl,mpc8548-pcie";
device_type = "pci";
- #interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
- reg = <0 0xffe0a000 0 0x1000>;
bus-range = <0 255>;
clock-frequency = <33333333>;
interrupt-parent = <&mpic>;
interrupts = <16 2>;
+
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <16 2>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0x0 0x0 0x1 &mpic 0x0 0x1
+ 0000 0x0 0x0 0x2 &mpic 0x1 0x1
+ 0000 0x0 0x0 0x3 &mpic 0x2 0x1
+ 0000 0x0 0x0 0x4 &mpic 0x3 0x1
+ >;
+ };
};
};
--
1.7.3.4
^ permalink raw reply related [flat|nested] 19+ messages in thread
* [PATCH 04/11] powerpc/85xx: Update SPI binding to match binding spec for P1020RDB
2011-10-22 21:20 ` [PATCH 03/11] powerpc/85xx: Rework PCI nodes on P1020RDB Kumar Gala
@ 2011-10-22 21:20 ` Kumar Gala
2011-10-22 21:20 ` [PATCH 05/11] powerpc/85xx: Update P1020 SEC3.3 node to match actual SoC HW Kumar Gala
2011-10-23 14:37 ` [PATCH 03/11] powerpc/85xx: Rework PCI nodes on P1020RDB Tabi Timur-B04825
1 sibling, 1 reply; 19+ messages in thread
From: Kumar Gala @ 2011-10-22 21:20 UTC (permalink / raw)
To: linuxppc-dev
The SPI node is out of date with regards to the binding for fsl-espi and
driver support.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
arch/powerpc/boot/dts/p1020rdb.dts | 30 +++++++++++++-----------------
arch/powerpc/boot/dts/p1020si.dtsi | 5 ++---
2 files changed, 15 insertions(+), 20 deletions(-)
diff --git a/arch/powerpc/boot/dts/p1020rdb.dts b/arch/powerpc/boot/dts/p1020rdb.dts
index 8b1a7ee..b31e7ec 100644
--- a/arch/powerpc/boot/dts/p1020rdb.dts
+++ b/arch/powerpc/boot/dts/p1020rdb.dts
@@ -149,49 +149,45 @@
};
spi@7000 {
-
- fsl_m25p80@0 {
+ flash@0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "fsl,espi-flash";
+ compatible = "spansion,s25sl12801";
reg = <0>;
- linux,modalias = "fsl_m25p80";
- modal = "s25sl128b";
- spi-max-frequency = <50000000>;
- mode = <0>;
+ spi-max-frequency = <40000000>; /* input clock */
- partition@0 {
+ partition@u-boot {
/* 512KB for u-boot Bootloader Image */
reg = <0x0 0x00080000>;
- label = "SPI (RO) U-Boot Image";
+ label = "u-boot";
read-only;
};
- partition@80000 {
+ partition@dtb {
/* 512KB for DTB Image */
reg = <0x00080000 0x00080000>;
- label = "SPI (RO) DTB Image";
+ label = "dtb";
read-only;
};
- partition@100000 {
+ partition@kernel {
/* 4MB for Linux Kernel Image */
reg = <0x00100000 0x00400000>;
- label = "SPI (RO) Linux Kernel Image";
+ label = "kernel";
read-only;
};
- partition@500000 {
+ partition@fs {
/* 4MB for Compressed RFS Image */
reg = <0x00500000 0x00400000>;
- label = "SPI (RO) Compressed RFS Image";
+ label = "file system";
read-only;
};
- partition@900000 {
+ partition@jffs-fs {
/* 7MB for JFFS2 based RFS */
reg = <0x00900000 0x00700000>;
- label = "SPI (RW) JFFS2 RFS";
+ label = "file system jffs2";
};
};
};
diff --git a/arch/powerpc/boot/dts/p1020si.dtsi b/arch/powerpc/boot/dts/p1020si.dtsi
index 58f6b30..25e10cf 100644
--- a/arch/powerpc/boot/dts/p1020si.dtsi
+++ b/arch/powerpc/boot/dts/p1020si.dtsi
@@ -112,14 +112,13 @@
};
spi@7000 {
- cell-index = <0>;
#address-cells = <1>;
#size-cells = <0>;
- compatible = "fsl,espi";
+ compatible = "fsl,p1020-espi", "fsl,mpc8536-espi";
reg = <0x7000 0x1000>;
interrupts = <59 0x2>;
interrupt-parent = <&mpic>;
- mode = "cpu";
+ fsl,espi-num-chipselects = <4>;
};
gpio: gpio-controller@f000 {
--
1.7.3.4
^ permalink raw reply related [flat|nested] 19+ messages in thread
* [PATCH 05/11] powerpc/85xx: Update P1020 SEC3.3 node to match actual SoC HW
2011-10-22 21:20 ` [PATCH 04/11] powerpc/85xx: Update SPI binding to match binding spec for P1020RDB Kumar Gala
@ 2011-10-22 21:20 ` Kumar Gala
2011-10-22 21:20 ` [PATCH 06/11] powerpc/85xx: Add ethernet magic packet property to P1020 device tree Kumar Gala
0 siblings, 1 reply; 19+ messages in thread
From: Kumar Gala @ 2011-10-22 21:20 UTC (permalink / raw)
To: linuxppc-dev
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
arch/powerpc/boot/dts/p1020si.dtsi | 9 +++++----
1 files changed, 5 insertions(+), 4 deletions(-)
diff --git a/arch/powerpc/boot/dts/p1020si.dtsi b/arch/powerpc/boot/dts/p1020si.dtsi
index 25e10cf..5514e1d 100644
--- a/arch/powerpc/boot/dts/p1020si.dtsi
+++ b/arch/powerpc/boot/dts/p1020si.dtsi
@@ -305,15 +305,16 @@
};
crypto@30000 {
- compatible = "fsl,sec3.1", "fsl,sec3.0", "fsl,sec2.4",
- "fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0";
+ compatible = "fsl,sec3.3", "fsl,sec3.1", "fsl,sec3.0",
+ "fsl,sec2.4", "fsl,sec2.2", "fsl,sec2.1",
+ "fsl,sec2.0";
reg = <0x30000 0x10000>;
interrupts = <45 2 58 2>;
interrupt-parent = <&mpic>;
fsl,num-channels = <4>;
fsl,channel-fifo-len = <24>;
- fsl,exec-units-mask = <0xbfe>;
- fsl,descriptor-types-mask = <0x3ab0ebf>;
+ fsl,exec-units-mask = <0x97c>;
+ fsl,descriptor-types-mask = <0x3a30abf>;
};
mpic: pic@40000 {
--
1.7.3.4
^ permalink raw reply related [flat|nested] 19+ messages in thread
* [PATCH 06/11] powerpc/85xx: Add ethernet magic packet property to P1020 device tree
2011-10-22 21:20 ` [PATCH 05/11] powerpc/85xx: Update P1020 SEC3.3 node to match actual SoC HW Kumar Gala
@ 2011-10-22 21:20 ` Kumar Gala
2011-10-22 21:20 ` [PATCH 07/11] powerpc/85xx: p1020si.dtsi update interrupt handling Kumar Gala
2011-10-25 22:19 ` [PATCH 06/11] powerpc/85xx: Add ethernet magic packet property to P1020 " Scott Wood
0 siblings, 2 replies; 19+ messages in thread
From: Kumar Gala @ 2011-10-22 21:20 UTC (permalink / raw)
To: linuxppc-dev
All eTSEC2 controllers support waking on magic packet so fixup device
tree to report that.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
arch/powerpc/boot/dts/p1020si.dtsi | 3 +++
1 files changed, 3 insertions(+), 0 deletions(-)
diff --git a/arch/powerpc/boot/dts/p1020si.dtsi b/arch/powerpc/boot/dts/p1020si.dtsi
index 5514e1d..14dff69 100644
--- a/arch/powerpc/boot/dts/p1020si.dtsi
+++ b/arch/powerpc/boot/dts/p1020si.dtsi
@@ -200,6 +200,7 @@
compatible = "fsl,etsec2";
fsl,num_rx_queues = <0x8>;
fsl,num_tx_queues = <0x8>;
+ fsl,magic-packet;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupt-parent = <&mpic>;
@@ -226,6 +227,7 @@
compatible = "fsl,etsec2";
fsl,num_rx_queues = <0x8>;
fsl,num_tx_queues = <0x8>;
+ fsl,magic-packet;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupt-parent = <&mpic>;
@@ -252,6 +254,7 @@
compatible = "fsl,etsec2";
fsl,num_rx_queues = <0x8>;
fsl,num_tx_queues = <0x8>;
+ fsl,magic-packet;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupt-parent = <&mpic>;
--
1.7.3.4
^ permalink raw reply related [flat|nested] 19+ messages in thread
* [PATCH 07/11] powerpc/85xx: p1020si.dtsi update interrupt handling
2011-10-22 21:20 ` [PATCH 06/11] powerpc/85xx: Add ethernet magic packet property to P1020 device tree Kumar Gala
@ 2011-10-22 21:20 ` Kumar Gala
2011-10-22 21:20 ` [PATCH 08/11] powerpc/85xx: create dts components to build up an SoC Kumar Gala
2011-10-25 22:19 ` [PATCH 06/11] powerpc/85xx: Add ethernet magic packet property to P1020 " Scott Wood
1 sibling, 1 reply; 19+ messages in thread
From: Kumar Gala @ 2011-10-22 21:20 UTC (permalink / raw)
To: linuxppc-dev
* set interrupt-parent at root so its not duplicate in every node
* Add mpic timers
* Move to 4-prop cells for mpic timer
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
arch/powerpc/boot/dts/p1020si.dtsi | 117 +++++++++++++++++-------------------
1 files changed, 56 insertions(+), 61 deletions(-)
diff --git a/arch/powerpc/boot/dts/p1020si.dtsi b/arch/powerpc/boot/dts/p1020si.dtsi
index 14dff69..b08c848 100644
--- a/arch/powerpc/boot/dts/p1020si.dtsi
+++ b/arch/powerpc/boot/dts/p1020si.dtsi
@@ -14,6 +14,7 @@
compatible = "fsl,P1020";
#address-cells = <2>;
#size-cells = <2>;
+ interrupt-parent = <&mpic>;
cpus {
#address-cells = <1>;
@@ -37,8 +38,7 @@
#size-cells = <1>;
compatible = "fsl,p1020-elbc", "fsl,elbc", "simple-bus";
reg = <0 0xffe05000 0 0x1000>;
- interrupts = <19 2>;
- interrupt-parent = <&mpic>;
+ interrupts = <19 2 0 0>;
};
soc@ffe00000 {
@@ -58,15 +58,13 @@
ecm@1000 {
compatible = "fsl,p1020-ecm", "fsl,ecm";
reg = <0x1000 0x1000>;
- interrupts = <16 2>;
- interrupt-parent = <&mpic>;
+ interrupts = <16 2 0 0>;
};
memory-controller@2000 {
compatible = "fsl,p1020-memory-controller";
reg = <0x2000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <16 2>;
+ interrupts = <16 2 0 0>;
};
i2c@3000 {
@@ -75,8 +73,7 @@
cell-index = <0>;
compatible = "fsl-i2c";
reg = <0x3000 0x100>;
- interrupts = <43 2>;
- interrupt-parent = <&mpic>;
+ interrupts = <43 2 0 0>;
dfsrr;
};
@@ -86,8 +83,7 @@
cell-index = <1>;
compatible = "fsl-i2c";
reg = <0x3100 0x100>;
- interrupts = <43 2>;
- interrupt-parent = <&mpic>;
+ interrupts = <43 2 0 0>;
dfsrr;
};
@@ -97,8 +93,7 @@
compatible = "ns16550";
reg = <0x4500 0x100>;
clock-frequency = <0>;
- interrupts = <42 2>;
- interrupt-parent = <&mpic>;
+ interrupts = <42 2 0 0>;
};
serial1: serial@4600 {
@@ -107,8 +102,7 @@
compatible = "ns16550";
reg = <0x4600 0x100>;
clock-frequency = <0>;
- interrupts = <42 2>;
- interrupt-parent = <&mpic>;
+ interrupts = <42 2 0 0>;
};
spi@7000 {
@@ -116,8 +110,7 @@
#size-cells = <0>;
compatible = "fsl,p1020-espi", "fsl,mpc8536-espi";
reg = <0x7000 0x1000>;
- interrupts = <59 0x2>;
- interrupt-parent = <&mpic>;
+ interrupts = <59 0x2 0 0>;
fsl,espi-num-chipselects = <4>;
};
@@ -125,8 +118,7 @@
#gpio-cells = <2>;
compatible = "fsl,mpc8572-gpio";
reg = <0xf000 0x100>;
- interrupts = <47 0x2>;
- interrupt-parent = <&mpic>;
+ interrupts = <47 0x2 0 0>;
gpio-controller;
};
@@ -135,8 +127,7 @@
reg = <0x20000 0x1000>;
cache-line-size = <32>; // 32 bytes
cache-size = <0x40000>; // L2,256K
- interrupt-parent = <&mpic>;
- interrupts = <16 2>;
+ interrupts = <16 2 0 0>;
};
dma@21300 {
@@ -150,29 +141,25 @@
compatible = "fsl,eloplus-dma-channel";
reg = <0x0 0x80>;
cell-index = <0>;
- interrupt-parent = <&mpic>;
- interrupts = <20 2>;
+ interrupts = <20 2 0 0>;
};
dma-channel@80 {
compatible = "fsl,eloplus-dma-channel";
reg = <0x80 0x80>;
cell-index = <1>;
- interrupt-parent = <&mpic>;
- interrupts = <21 2>;
+ interrupts = <21 2 0 0>;
};
dma-channel@100 {
compatible = "fsl,eloplus-dma-channel";
reg = <0x100 0x80>;
cell-index = <2>;
- interrupt-parent = <&mpic>;
- interrupts = <22 2>;
+ interrupts = <22 2 0 0>;
};
dma-channel@180 {
compatible = "fsl,eloplus-dma-channel";
reg = <0x180 0x80>;
cell-index = <3>;
- interrupt-parent = <&mpic>;
- interrupts = <23 2>;
+ interrupts = <23 2 0 0>;
};
};
@@ -202,20 +189,19 @@
fsl,num_tx_queues = <0x8>;
fsl,magic-packet;
local-mac-address = [ 00 00 00 00 00 00 ];
- interrupt-parent = <&mpic>;
queue-group@0 {
#address-cells = <1>;
#size-cells = <1>;
reg = <0xb0000 0x1000>;
- interrupts = <29 2 30 2 34 2>;
+ interrupts = <29 2 0 0 30 2 0 0 34 2 0 0>;
};
queue-group@1 {
#address-cells = <1>;
#size-cells = <1>;
reg = <0xb4000 0x1000>;
- interrupts = <17 2 18 2 24 2>;
+ interrupts = <17 2 0 0 18 2 0 0 24 2 0 0>;
};
};
@@ -229,20 +215,19 @@
fsl,num_tx_queues = <0x8>;
fsl,magic-packet;
local-mac-address = [ 00 00 00 00 00 00 ];
- interrupt-parent = <&mpic>;
queue-group@0 {
#address-cells = <1>;
#size-cells = <1>;
reg = <0xb1000 0x1000>;
- interrupts = <35 2 36 2 40 2>;
+ interrupts = <35 2 0 0 36 2 0 0 40 2 0 0>;
};
queue-group@1 {
#address-cells = <1>;
#size-cells = <1>;
reg = <0xb5000 0x1000>;
- interrupts = <51 2 52 2 67 2>;
+ interrupts = <51 2 0 0 52 2 0 0 67 2 0 0>;
};
};
@@ -256,20 +241,19 @@
fsl,num_tx_queues = <0x8>;
fsl,magic-packet;
local-mac-address = [ 00 00 00 00 00 00 ];
- interrupt-parent = <&mpic>;
queue-group@0 {
#address-cells = <1>;
#size-cells = <1>;
reg = <0xb2000 0x1000>;
- interrupts = <31 2 32 2 33 2>;
+ interrupts = <31 2 0 0 32 2 0 0 33 2 0 0>;
};
queue-group@1 {
#address-cells = <1>;
#size-cells = <1>;
reg = <0xb6000 0x1000>;
- interrupts = <25 2 26 2 27 2>;
+ interrupts = <25 2 0 0 26 2 0 0 27 2 0 0>;
};
};
@@ -278,8 +262,7 @@
#size-cells = <0>;
compatible = "fsl-usb2-dr";
reg = <0x22000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <28 0x2>;
+ interrupts = <28 0x2 0 0>;
};
/* USB2 is shared with localbus, so it must be disabled
@@ -292,8 +275,7 @@
#size-cells = <0>;
compatible = "fsl-usb2-dr";
reg = <0x23000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <46 0x2>;
+ interrupts = <46 0x2 0 0>;
phy_type = "ulpi";
};
*/
@@ -301,8 +283,7 @@
sdhci@2e000 {
compatible = "fsl,p1020-esdhc", "fsl,esdhc";
reg = <0x2e000 0x1000>;
- interrupts = <72 0x2>;
- interrupt-parent = <&mpic>;
+ interrupts = <72 0x2 0 0>;
/* Filled in by U-Boot */
clock-frequency = <0>;
};
@@ -312,8 +293,7 @@
"fsl,sec2.4", "fsl,sec2.2", "fsl,sec2.1",
"fsl,sec2.0";
reg = <0x30000 0x10000>;
- interrupts = <45 2 58 2>;
- interrupt-parent = <&mpic>;
+ interrupts = <45 2 0 0 58 2 0 0>;
fsl,num-channels = <4>;
fsl,channel-fifo-len = <24>;
fsl,exec-units-mask = <0x97c>;
@@ -323,26 +303,43 @@
mpic: pic@40000 {
interrupt-controller;
#address-cells = <0>;
- #interrupt-cells = <2>;
+ #interrupt-cells = <4>;
reg = <0x40000 0x40000>;
compatible = "chrp,open-pic";
device_type = "open-pic";
};
+ timer@41100 {
+ compatible = "fsl,mpic-global-timer";
+ reg = <0x41100 0x100 0x41300 4>;
+ interrupts = <0 0 3 0
+ 1 0 3 0
+ 2 0 3 0
+ 3 0 3 0>;
+ };
+
+ timer@42100 {
+ compatible = "fsl,mpic-global-timer";
+ reg = <0x42100 0x100 0x42300 4>;
+ interrupts = <4 0 3 0
+ 5 0 3 0
+ 6 0 3 0
+ 7 0 3 0>;
+ };
+
msi@41600 {
compatible = "fsl,p1020-msi", "fsl,mpic-msi";
reg = <0x41600 0x80>;
msi-available-ranges = <0 0x100>;
interrupts = <
- 0xe0 0
- 0xe1 0
- 0xe2 0
- 0xe3 0
- 0xe4 0
- 0xe5 0
- 0xe6 0
- 0xe7 0>;
- interrupt-parent = <&mpic>;
+ 0xe0 0 0 0
+ 0xe1 0 0 0
+ 0xe2 0 0 0
+ 0xe3 0 0 0
+ 0xe4 0 0 0
+ 0xe5 0 0 0
+ 0xe6 0 0 0
+ 0xe7 0 0 0>;
};
global-utilities@e0000 { //global utilities block
@@ -359,8 +356,7 @@
#address-cells = <3>;
bus-range = <0 255>;
clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <16 2>;
+ interrupts = <16 2 0 0>;
pcie@0 {
reg = <0 0 0 0 0>;
@@ -368,7 +364,7 @@
#size-cells = <2>;
#address-cells = <3>;
device_type = "pci";
- interrupts = <16 2>;
+ interrupts = <16 2 0 0>;
interrupt-map-mask = <0xf800 0 0 7>;
interrupt-map = <
/* IDSEL 0x0 */
@@ -388,8 +384,7 @@
#address-cells = <3>;
bus-range = <0 255>;
clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <16 2>;
+ interrupts = <16 2 0 0>;
pcie@0 {
reg = <0 0 0 0 0>;
@@ -397,7 +392,7 @@
#size-cells = <2>;
#address-cells = <3>;
device_type = "pci";
- interrupts = <16 2>;
+ interrupts = <16 2 0 0>;
interrupt-map-mask = <0xf800 0 0 7>;
interrupt-map = <
--
1.7.3.4
^ permalink raw reply related [flat|nested] 19+ messages in thread
* [PATCH 08/11] powerpc/85xx: create dts components to build up an SoC
2011-10-22 21:20 ` [PATCH 07/11] powerpc/85xx: p1020si.dtsi update interrupt handling Kumar Gala
@ 2011-10-22 21:20 ` Kumar Gala
2011-10-22 21:20 ` [PATCH 09/11] powerpc/85xx: Rework P1020 SoC device tree Kumar Gala
0 siblings, 1 reply; 19+ messages in thread
From: Kumar Gala @ 2011-10-22 21:20 UTC (permalink / raw)
To: linuxppc-dev
Introduce some common components that we can utilize to build up the
various PQ3/85xx device trees.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
arch/powerpc/boot/dts/fsl/pq3-dma-0.dtsi | 66 ++++++++++++++++++++++
arch/powerpc/boot/dts/fsl/pq3-duart-0.dtsi | 51 +++++++++++++++++
arch/powerpc/boot/dts/fsl/pq3-esdhc-0.dtsi | 41 ++++++++++++++
arch/powerpc/boot/dts/fsl/pq3-espi-0.dtsi | 42 ++++++++++++++
arch/powerpc/boot/dts/fsl/pq3-etsec2-0.dtsi | 67 +++++++++++++++++++++++
arch/powerpc/boot/dts/fsl/pq3-etsec2-1.dtsi | 67 +++++++++++++++++++++++
arch/powerpc/boot/dts/fsl/pq3-etsec2-2.dtsi | 66 ++++++++++++++++++++++
arch/powerpc/boot/dts/fsl/pq3-gpio-0.dtsi | 41 ++++++++++++++
arch/powerpc/boot/dts/fsl/pq3-i2c-0.dtsi | 43 +++++++++++++++
arch/powerpc/boot/dts/fsl/pq3-i2c-1.dtsi | 43 +++++++++++++++
arch/powerpc/boot/dts/fsl/pq3-mpic-timer-B.dtsi | 42 ++++++++++++++
arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi | 66 ++++++++++++++++++++++
arch/powerpc/boot/dts/fsl/pq3-sec3.3-0.dtsi | 45 +++++++++++++++
13 files changed, 680 insertions(+), 0 deletions(-)
create mode 100644 arch/powerpc/boot/dts/fsl/pq3-dma-0.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/pq3-duart-0.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/pq3-esdhc-0.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/pq3-espi-0.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/pq3-etsec2-0.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/pq3-etsec2-1.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/pq3-etsec2-2.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/pq3-gpio-0.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/pq3-i2c-0.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/pq3-i2c-1.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/pq3-mpic-timer-B.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/pq3-sec3.3-0.dtsi
diff --git a/arch/powerpc/boot/dts/fsl/pq3-dma-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-dma-0.dtsi
new file mode 100644
index 0000000..caf0b1e
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-dma-0.dtsi
@@ -0,0 +1,66 @@
+/*
+ * PQ3 DMA device tree stub [ controller @ offset 0x21000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&dma0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,eloplus-dma";
+ reg = <0x21300 0x4>;
+ ranges = <0x0 0x21100 0x200>;
+ cell-index = <0>;
+ dma-channel@0 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x0 0x80>;
+ cell-index = <0>;
+ interrupts = <20 2 0 0>;
+ };
+ dma-channel@80 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x80 0x80>;
+ cell-index = <1>;
+ interrupts = <21 2 0 0>;
+ };
+ dma-channel@100 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x100 0x80>;
+ cell-index = <2>;
+ interrupts = <22 2 0 0>;
+ };
+ dma-channel@180 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x180 0x80>;
+ cell-index = <3>;
+ interrupts = <23 2 0 0>;
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-duart-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-duart-0.dtsi
new file mode 100644
index 0000000..3cd2545
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-duart-0.dtsi
@@ -0,0 +1,51 @@
+/*
+ * PQ3 DUART device tree stub [ controller @ offset 0x4000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&serial0 {
+ cell-index = <0>;
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0x4500 0x100>;
+ clock-frequency = <0>;
+ interrupts = <42 2 0 0>;
+};
+
+&serial1 {
+ cell-index = <1>;
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0x4600 0x100>;
+ clock-frequency = <0>;
+ interrupts = <42 2 0 0>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-esdhc-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-esdhc-0.dtsi
new file mode 100644
index 0000000..b4e428c
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-esdhc-0.dtsi
@@ -0,0 +1,41 @@
+/*
+ * PQ3 eSDHC device tree stub [ controller @ offset 0x2e000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&sdhc0 {
+ compatible = "fsl,esdhc";
+ reg = <0x2e000 0x1000>;
+ interrupts = <72 0x2 0 0>;
+ /* Filled in by U-Boot */
+ clock-frequency = <0>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-espi-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-espi-0.dtsi
new file mode 100644
index 0000000..4a51bce
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-espi-0.dtsi
@@ -0,0 +1,42 @@
+/*
+ * PQ3 eSPI device tree stub [ controller @ offset 0x7000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&spi0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,mpc8536-espi";
+ reg = <0x7000 0x1000>;
+ interrupts = <59 0x2 0 0>;
+ fsl,espi-num-chipselects = <4>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-etsec2-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-etsec2-0.dtsi
new file mode 100644
index 0000000..c65b434
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-etsec2-0.dtsi
@@ -0,0 +1,67 @@
+/*
+ * PQ3 eTSEC2 device tree stub [ @ offsets 0x24000/0xb0000/0xb4000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+
+&mdio0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,etsec2-mdio";
+ reg = <0x24000 0x1000 0xb0030 0x4>;
+};
+
+&enet0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "network";
+ model = "eTSEC";
+ compatible = "fsl,etsec2";
+ fsl,num_rx_queues = <0x8>;
+ fsl,num_tx_queues = <0x8>;
+ fsl,magic-packet;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+
+ queue-group@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0xb0000 0x1000>;
+ interrupts = <29 2 0 0 30 2 0 0 34 2 0 0>;
+ };
+
+ queue-group@1 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0xb4000 0x1000>;
+ interrupts = <17 2 0 0 18 2 0 0 24 2 0 0>;
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-etsec2-1.dtsi b/arch/powerpc/boot/dts/fsl/pq3-etsec2-1.dtsi
new file mode 100644
index 0000000..9490f4f
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-etsec2-1.dtsi
@@ -0,0 +1,67 @@
+/*
+ * PQ3 eTSEC2 device tree stub [ @ offsets 0x25000/0xb1000/0xb5000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+
+&mdio1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,etsec2-tbi";
+ reg = <0x25000 0x1000 0xb1030 0x4>;
+};
+
+&enet1 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "network";
+ model = "eTSEC";
+ compatible = "fsl,etsec2";
+ fsl,num_rx_queues = <0x8>;
+ fsl,num_tx_queues = <0x8>;
+ fsl,magic-packet;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+
+ queue-group@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0xb1000 0x1000>;
+ interrupts = <35 2 0 0 36 2 0 0 40 2 0 0>;
+ };
+
+ queue-group@1 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0xb5000 0x1000>;
+ interrupts = <51 2 0 0 52 2 0 0 67 2 0 0>;
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-etsec2-2.dtsi b/arch/powerpc/boot/dts/fsl/pq3-etsec2-2.dtsi
new file mode 100644
index 0000000..61efc92
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-etsec2-2.dtsi
@@ -0,0 +1,66 @@
+/*
+ * PQ3 eTSEC2 device tree stub [ @ offsets 0x26000/0xb2000/0xb6000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&mdio2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,etsec2-tbi";
+ reg = <0x26000 0x1000 0xb1030 0x4>;
+};
+
+&enet2 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "network";
+ model = "eTSEC";
+ compatible = "fsl,etsec2";
+ fsl,num_rx_queues = <0x8>;
+ fsl,num_tx_queues = <0x8>;
+ fsl,magic-packet;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+
+ queue-group@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0xb2000 0x1000>;
+ interrupts = <31 2 0 0 32 2 0 0 33 2 0 0>;
+ };
+
+ queue-group@1 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0xb6000 0x1000>;
+ interrupts = <25 2 0 0 26 2 0 0 27 2 0 0>;
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-gpio-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-gpio-0.dtsi
new file mode 100644
index 0000000..a62a6d8
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-gpio-0.dtsi
@@ -0,0 +1,41 @@
+/*
+ * PQ3 GPIO device tree stub [ controller @ offset 0xf000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&gpio0 {
+ #gpio-cells = <2>;
+ compatible = "fsl,pq3-gpio";
+ reg = <0xf000 0x100>;
+ interrupts = <47 0x2 0 0>;
+ gpio-controller;
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-i2c-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-i2c-0.dtsi
new file mode 100644
index 0000000..82f5aaa
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-i2c-0.dtsi
@@ -0,0 +1,43 @@
+/*
+ * PQ3 I2C device tree stub [ controller @ offset 0x3000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&i2c0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <0>;
+ compatible = "fsl-i2c";
+ reg = <0x3000 0x100>;
+ interrupts = <43 2 0 0>;
+ dfsrr;
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-i2c-1.dtsi b/arch/powerpc/boot/dts/fsl/pq3-i2c-1.dtsi
new file mode 100644
index 0000000..ac077de
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-i2c-1.dtsi
@@ -0,0 +1,43 @@
+/*
+ * PQ3 I2C device tree stub [ controller @ offset 0x3100 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&i2c1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <1>;
+ compatible = "fsl-i2c";
+ reg = <0x3100 0x100>;
+ interrupts = <43 2 0 0>;
+ dfsrr;
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-mpic-timer-B.dtsi b/arch/powerpc/boot/dts/fsl/pq3-mpic-timer-B.dtsi
new file mode 100644
index 0000000..274b16a
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-mpic-timer-B.dtsi
@@ -0,0 +1,42 @@
+/*
+ * PQ3 MPIC Timer (Group B) device tree stub [ controller @ offset 0x42100 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&timerB {
+ compatible = "fsl,mpic-global-timer";
+ reg = <0x42100 0x100 0x42300 4>;
+ interrupts = <4 0 3 0
+ 5 0 3 0
+ 6 0 3 0
+ 7 0 3 0>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi b/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi
new file mode 100644
index 0000000..94ecd9f
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi
@@ -0,0 +1,66 @@
+/*
+ * PQ3 MPIC device tree stub [ controller @ offset 0x40000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&mpic {
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <4>;
+ reg = <0x40000 0x40000>;
+ compatible = "chrp,open-pic";
+ device_type = "open-pic";
+};
+
+&timerA {
+ compatible = "fsl,mpic-global-timer";
+ reg = <0x41100 0x100 0x41300 4>;
+ interrupts = <0 0 3 0
+ 1 0 3 0
+ 2 0 3 0
+ 3 0 3 0>;
+};
+
+&msiA {
+ compatible = "fsl,mpic-msi";
+ reg = <0x41600 0x80>;
+ msi-available-ranges = <0 0x100>;
+ interrupts = <
+ 0xe0 0 0 0
+ 0xe1 0 0 0
+ 0xe2 0 0 0
+ 0xe3 0 0 0
+ 0xe4 0 0 0
+ 0xe5 0 0 0
+ 0xe6 0 0 0
+ 0xe7 0 0 0>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-sec3.3-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-sec3.3-0.dtsi
new file mode 100644
index 0000000..d06d2c4
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-sec3.3-0.dtsi
@@ -0,0 +1,45 @@
+/*
+ * PQ3 Sec/Crypto 3.3 device tree stub [ controller @ offset 0x30000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&crypto {
+ compatible = "fsl,sec3.3", "fsl,sec3.1", "fsl,sec3.0",
+ "fsl,sec2.4", "fsl,sec2.2", "fsl,sec2.1",
+ "fsl,sec2.0";
+ reg = <0x30000 0x10000>;
+ interrupts = <45 2 0 0 58 2 0 0>;
+ fsl,num-channels = <4>;
+ fsl,channel-fifo-len = <24>;
+ fsl,exec-units-mask = <0x97c>;
+ fsl,descriptor-types-mask = <0x3a30abf>;
+};
--
1.7.3.4
^ permalink raw reply related [flat|nested] 19+ messages in thread
* [PATCH 09/11] powerpc/85xx: Rework P1020 SoC device tree
2011-10-22 21:20 ` [PATCH 08/11] powerpc/85xx: create dts components to build up an SoC Kumar Gala
@ 2011-10-22 21:20 ` Kumar Gala
2011-10-22 21:20 ` [PATCH 10/11] powerpc/85xx: Rework P1020RDB " Kumar Gala
0 siblings, 1 reply; 19+ messages in thread
From: Kumar Gala @ 2011-10-22 21:20 UTC (permalink / raw)
To: linuxppc-dev
Split the P1020 SoC device tree into what we can include as a 'prefix'
to the board device tree and what needs to be included as a 'postfix'.
This allows use more re-use and less duplication between various board
device tree configurations (32-bit address map vs 36-bit address map).
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
arch/powerpc/boot/dts/fsl/p1020si-post.dtsi | 229 +++++++++++++++
arch/powerpc/boot/dts/fsl/p1020si-pre.dtsi | 68 +++++
arch/powerpc/boot/dts/p1020si.dtsi | 407 ---------------------------
3 files changed, 297 insertions(+), 407 deletions(-)
create mode 100644 arch/powerpc/boot/dts/fsl/p1020si-post.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/p1020si-pre.dtsi
delete mode 100644 arch/powerpc/boot/dts/p1020si.dtsi
diff --git a/arch/powerpc/boot/dts/fsl/p1020si-post.dtsi b/arch/powerpc/boot/dts/fsl/p1020si-post.dtsi
new file mode 100644
index 0000000..74538a4
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p1020si-post.dtsi
@@ -0,0 +1,229 @@
+/*
+ * P1020/P1011 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&lbc {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "fsl,p1020-elbc", "fsl,elbc", "simple-bus";
+ interrupts = <19 2 0 0>;
+};
+
+&pci0 {
+ compatible = "fsl,mpc8548-pcie";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0 255>;
+ clock-frequency = <33333333>;
+ interrupts = <16 2 0 0>;
+
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <16 2 0 0>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0x0 0x0 0x1 &mpic 0x4 0x1
+ 0000 0x0 0x0 0x2 &mpic 0x5 0x1
+ 0000 0x0 0x0 0x3 &mpic 0x6 0x1
+ 0000 0x0 0x0 0x4 &mpic 0x7 0x1
+ >;
+ };
+};
+
+&pci1 {
+ compatible = "fsl,mpc8548-pcie";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0 255>;
+ clock-frequency = <33333333>;
+ interrupts = <16 2 0 0>;
+
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <16 2 0 0>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0x0 0x0 0x1 &mpic 0x0 0x1
+ 0000 0x0 0x0 0x2 &mpic 0x1 0x1
+ 0000 0x0 0x0 0x3 &mpic 0x2 0x1
+ 0000 0x0 0x0 0x4 &mpic 0x3 0x1
+ >;
+ };
+};
+
+&soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "soc";
+ compatible = "fsl,p1020-immr", "simple-bus";
+ bus-frequency = <0>; // Filled out by uboot.
+
+ ecm-law@0 {
+ compatible = "fsl,ecm-law";
+ reg = <0x0 0x1000>;
+ fsl,num-laws = <12>;
+ };
+
+ ecm@1000 {
+ compatible = "fsl,p1020-ecm", "fsl,ecm";
+ reg = <0x1000 0x1000>;
+ interrupts = <16 2 0 0>;
+ };
+
+ memory-controller@2000 {
+ compatible = "fsl,p1020-memory-controller";
+ reg = <0x2000 0x1000>;
+ interrupts = <16 2 0 0>;
+ };
+
+ i2c0: i2c@3000 {
+ };
+
+ i2c1: i2c@3100 {
+ };
+
+ serial0: serial@4500 {
+ };
+
+ serial1: serial@4600 {
+ };
+
+ spi0: spi@7000 {
+ };
+
+ gpio0: gpio-controller@f000 {
+ };
+
+ L2: l2-cache-controller@20000 {
+ compatible = "fsl,p1020-l2-cache-controller";
+ reg = <0x20000 0x1000>;
+ cache-line-size = <32>; // 32 bytes
+ cache-size = <0x40000>; // L2,256K
+ interrupts = <16 2 0 0>;
+ };
+
+ dma0: dma@21300 {
+ };
+
+ mdio0: mdio@24000 {
+ };
+
+ mdio1: mdio@25000 {
+ };
+
+ mdio2: mdio@26000 {
+ };
+
+ enet0: ethernet@b0000 {
+ };
+
+ enet1: ethernet@b1000 {
+ };
+
+ enet2: ethernet@b2000 {
+ };
+
+ usb@22000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl-usb2-dr";
+ reg = <0x22000 0x1000>;
+ interrupts = <28 0x2 0 0>;
+ };
+
+ /* USB2 is shared with localbus, so it must be disabled
+ by default. We can't put 'status = "disabled";' here
+ since U-Boot doesn't clear the status property when
+ it enables USB2. OTOH, U-Boot does create a new node
+ when there isn't any. So, just comment it out.
+ usb@23000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl-usb2-dr";
+ reg = <0x23000 0x1000>;
+ interrupts = <46 0x2 0 0>;
+ phy_type = "ulpi";
+ };
+ */
+
+ sdhc0: sdhc@2e000 {
+ };
+
+ crypto: crypto@30000 {
+ };
+
+ mpic: pic@40000 {
+ };
+
+ timerA: timer@41100 {
+ };
+
+ timerB: timer@42100 {
+ };
+
+ msiA: msi@41600 {
+ };
+
+ global-utilities@e0000 {
+ compatible = "fsl,p1020-guts";
+ reg = <0xe0000 0x1000>;
+ fsl,has-rstcr;
+ };
+};
+
+/include/ "pq3-dma-0.dtsi"
+/include/ "pq3-duart-0.dtsi"
+/include/ "pq3-esdhc-0.dtsi"
+/include/ "pq3-espi-0.dtsi"
+/include/ "pq3-etsec2-0.dtsi"
+/include/ "pq3-etsec2-1.dtsi"
+/include/ "pq3-etsec2-2.dtsi"
+/include/ "pq3-gpio-0.dtsi"
+/include/ "pq3-i2c-0.dtsi"
+/include/ "pq3-i2c-1.dtsi"
+/include/ "pq3-mpic.dtsi"
+/include/ "pq3-mpic-timer-B.dtsi"
+/include/ "pq3-sec3.3-0.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/p1020si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p1020si-pre.dtsi
new file mode 100644
index 0000000..6f0376e
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p1020si-pre.dtsi
@@ -0,0 +1,68 @@
+/*
+ * P1020/P1011 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+/ {
+ compatible = "fsl,P1020";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-parent = <&mpic>;
+
+ aliases {
+ serial0 = &serial0;
+ serial1 = &serial1;
+ ethernet0 = &enet0;
+ ethernet1 = &enet1;
+ ethernet2 = &enet2;
+ pci0 = &pci0;
+ pci1 = &pci1;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,P1020@0 {
+ device_type = "cpu";
+ reg = <0x0>;
+ next-level-cache = <&L2>;
+ };
+
+ PowerPC,P1020@1 {
+ device_type = "cpu";
+ reg = <0x1>;
+ next-level-cache = <&L2>;
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/p1020si.dtsi b/arch/powerpc/boot/dts/p1020si.dtsi
deleted file mode 100644
index b08c848..0000000
--- a/arch/powerpc/boot/dts/p1020si.dtsi
+++ /dev/null
@@ -1,407 +0,0 @@
-/*
- * P1020si Device Tree Source
- *
- * Copyright 2011 Freescale Semiconductor Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-/dts-v1/;
-/ {
- compatible = "fsl,P1020";
- #address-cells = <2>;
- #size-cells = <2>;
- interrupt-parent = <&mpic>;
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- PowerPC,P1020@0 {
- device_type = "cpu";
- reg = <0x0>;
- next-level-cache = <&L2>;
- };
-
- PowerPC,P1020@1 {
- device_type = "cpu";
- reg = <0x1>;
- next-level-cache = <&L2>;
- };
- };
-
- localbus@ffe05000 {
- #address-cells = <2>;
- #size-cells = <1>;
- compatible = "fsl,p1020-elbc", "fsl,elbc", "simple-bus";
- reg = <0 0xffe05000 0 0x1000>;
- interrupts = <19 2 0 0>;
- };
-
- soc@ffe00000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "soc";
- compatible = "fsl,p1020-immr", "simple-bus";
- ranges = <0x0 0x0 0xffe00000 0x100000>;
- bus-frequency = <0>; // Filled out by uboot.
-
- ecm-law@0 {
- compatible = "fsl,ecm-law";
- reg = <0x0 0x1000>;
- fsl,num-laws = <12>;
- };
-
- ecm@1000 {
- compatible = "fsl,p1020-ecm", "fsl,ecm";
- reg = <0x1000 0x1000>;
- interrupts = <16 2 0 0>;
- };
-
- memory-controller@2000 {
- compatible = "fsl,p1020-memory-controller";
- reg = <0x2000 0x1000>;
- interrupts = <16 2 0 0>;
- };
-
- i2c@3000 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <0>;
- compatible = "fsl-i2c";
- reg = <0x3000 0x100>;
- interrupts = <43 2 0 0>;
- dfsrr;
- };
-
- i2c@3100 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <1>;
- compatible = "fsl-i2c";
- reg = <0x3100 0x100>;
- interrupts = <43 2 0 0>;
- dfsrr;
- };
-
- serial0: serial@4500 {
- cell-index = <0>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4500 0x100>;
- clock-frequency = <0>;
- interrupts = <42 2 0 0>;
- };
-
- serial1: serial@4600 {
- cell-index = <1>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4600 0x100>;
- clock-frequency = <0>;
- interrupts = <42 2 0 0>;
- };
-
- spi@7000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,p1020-espi", "fsl,mpc8536-espi";
- reg = <0x7000 0x1000>;
- interrupts = <59 0x2 0 0>;
- fsl,espi-num-chipselects = <4>;
- };
-
- gpio: gpio-controller@f000 {
- #gpio-cells = <2>;
- compatible = "fsl,mpc8572-gpio";
- reg = <0xf000 0x100>;
- interrupts = <47 0x2 0 0>;
- gpio-controller;
- };
-
- L2: l2-cache-controller@20000 {
- compatible = "fsl,p1020-l2-cache-controller";
- reg = <0x20000 0x1000>;
- cache-line-size = <32>; // 32 bytes
- cache-size = <0x40000>; // L2,256K
- interrupts = <16 2 0 0>;
- };
-
- dma@21300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,eloplus-dma";
- reg = <0x21300 0x4>;
- ranges = <0x0 0x21100 0x200>;
- cell-index = <0>;
- dma-channel@0 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupts = <20 2 0 0>;
- };
- dma-channel@80 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupts = <21 2 0 0>;
- };
- dma-channel@100 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupts = <22 2 0 0>;
- };
- dma-channel@180 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupts = <23 2 0 0>;
- };
- };
-
- mdio@24000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,etsec2-mdio";
- reg = <0x24000 0x1000 0xb0030 0x4>;
-
- };
-
- mdio@25000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,etsec2-tbi";
- reg = <0x25000 0x1000 0xb1030 0x4>;
-
- };
-
- enet0: ethernet@b0000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "network";
- model = "eTSEC";
- compatible = "fsl,etsec2";
- fsl,num_rx_queues = <0x8>;
- fsl,num_tx_queues = <0x8>;
- fsl,magic-packet;
- local-mac-address = [ 00 00 00 00 00 00 ];
-
- queue-group@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0xb0000 0x1000>;
- interrupts = <29 2 0 0 30 2 0 0 34 2 0 0>;
- };
-
- queue-group@1 {
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0xb4000 0x1000>;
- interrupts = <17 2 0 0 18 2 0 0 24 2 0 0>;
- };
- };
-
- enet1: ethernet@b1000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "network";
- model = "eTSEC";
- compatible = "fsl,etsec2";
- fsl,num_rx_queues = <0x8>;
- fsl,num_tx_queues = <0x8>;
- fsl,magic-packet;
- local-mac-address = [ 00 00 00 00 00 00 ];
-
- queue-group@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0xb1000 0x1000>;
- interrupts = <35 2 0 0 36 2 0 0 40 2 0 0>;
- };
-
- queue-group@1 {
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0xb5000 0x1000>;
- interrupts = <51 2 0 0 52 2 0 0 67 2 0 0>;
- };
- };
-
- enet2: ethernet@b2000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "network";
- model = "eTSEC";
- compatible = "fsl,etsec2";
- fsl,num_rx_queues = <0x8>;
- fsl,num_tx_queues = <0x8>;
- fsl,magic-packet;
- local-mac-address = [ 00 00 00 00 00 00 ];
-
- queue-group@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0xb2000 0x1000>;
- interrupts = <31 2 0 0 32 2 0 0 33 2 0 0>;
- };
-
- queue-group@1 {
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0xb6000 0x1000>;
- interrupts = <25 2 0 0 26 2 0 0 27 2 0 0>;
- };
- };
-
- usb@22000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl-usb2-dr";
- reg = <0x22000 0x1000>;
- interrupts = <28 0x2 0 0>;
- };
-
- /* USB2 is shared with localbus, so it must be disabled
- by default. We can't put 'status = "disabled";' here
- since U-Boot doesn't clear the status property when
- it enables USB2. OTOH, U-Boot does create a new node
- when there isn't any. So, just comment it out.
- usb@23000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl-usb2-dr";
- reg = <0x23000 0x1000>;
- interrupts = <46 0x2 0 0>;
- phy_type = "ulpi";
- };
- */
-
- sdhci@2e000 {
- compatible = "fsl,p1020-esdhc", "fsl,esdhc";
- reg = <0x2e000 0x1000>;
- interrupts = <72 0x2 0 0>;
- /* Filled in by U-Boot */
- clock-frequency = <0>;
- };
-
- crypto@30000 {
- compatible = "fsl,sec3.3", "fsl,sec3.1", "fsl,sec3.0",
- "fsl,sec2.4", "fsl,sec2.2", "fsl,sec2.1",
- "fsl,sec2.0";
- reg = <0x30000 0x10000>;
- interrupts = <45 2 0 0 58 2 0 0>;
- fsl,num-channels = <4>;
- fsl,channel-fifo-len = <24>;
- fsl,exec-units-mask = <0x97c>;
- fsl,descriptor-types-mask = <0x3a30abf>;
- };
-
- mpic: pic@40000 {
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <4>;
- reg = <0x40000 0x40000>;
- compatible = "chrp,open-pic";
- device_type = "open-pic";
- };
-
- timer@41100 {
- compatible = "fsl,mpic-global-timer";
- reg = <0x41100 0x100 0x41300 4>;
- interrupts = <0 0 3 0
- 1 0 3 0
- 2 0 3 0
- 3 0 3 0>;
- };
-
- timer@42100 {
- compatible = "fsl,mpic-global-timer";
- reg = <0x42100 0x100 0x42300 4>;
- interrupts = <4 0 3 0
- 5 0 3 0
- 6 0 3 0
- 7 0 3 0>;
- };
-
- msi@41600 {
- compatible = "fsl,p1020-msi", "fsl,mpic-msi";
- reg = <0x41600 0x80>;
- msi-available-ranges = <0 0x100>;
- interrupts = <
- 0xe0 0 0 0
- 0xe1 0 0 0
- 0xe2 0 0 0
- 0xe3 0 0 0
- 0xe4 0 0 0
- 0xe5 0 0 0
- 0xe6 0 0 0
- 0xe7 0 0 0>;
- };
-
- global-utilities@e0000 { //global utilities block
- compatible = "fsl,p1020-guts","fsl,p2020-guts";
- reg = <0xe0000 0x1000>;
- fsl,has-rstcr;
- };
- };
-
- pci0: pcie@ffe09000 {
- compatible = "fsl,mpc8548-pcie";
- device_type = "pci";
- #size-cells = <2>;
- #address-cells = <3>;
- bus-range = <0 255>;
- clock-frequency = <33333333>;
- interrupts = <16 2 0 0>;
-
- pcie@0 {
- reg = <0 0 0 0 0>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- interrupts = <16 2 0 0>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0x0 0x0 0x1 &mpic 0x4 0x1
- 0000 0x0 0x0 0x2 &mpic 0x5 0x1
- 0000 0x0 0x0 0x3 &mpic 0x6 0x1
- 0000 0x0 0x0 0x4 &mpic 0x7 0x1
- >;
- };
-
- };
-
- pci1: pcie@ffe0a000 {
- compatible = "fsl,mpc8548-pcie";
- device_type = "pci";
- #size-cells = <2>;
- #address-cells = <3>;
- bus-range = <0 255>;
- clock-frequency = <33333333>;
- interrupts = <16 2 0 0>;
-
- pcie@0 {
- reg = <0 0 0 0 0>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- interrupts = <16 2 0 0>;
- interrupt-map-mask = <0xf800 0 0 7>;
-
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0x0 0x0 0x1 &mpic 0x0 0x1
- 0000 0x0 0x0 0x2 &mpic 0x1 0x1
- 0000 0x0 0x0 0x3 &mpic 0x2 0x1
- 0000 0x0 0x0 0x4 &mpic 0x3 0x1
- >;
- };
- };
-};
--
1.7.3.4
^ permalink raw reply related [flat|nested] 19+ messages in thread
* [PATCH 10/11] powerpc/85xx: Rework P1020RDB device tree
2011-10-22 21:20 ` [PATCH 09/11] powerpc/85xx: Rework P1020 SoC device tree Kumar Gala
@ 2011-10-22 21:20 ` Kumar Gala
2011-10-22 21:20 ` [PATCH 11/11] powerpc/85xx: Add P1020RDB 36-bit address map " Kumar Gala
0 siblings, 1 reply; 19+ messages in thread
From: Kumar Gala @ 2011-10-22 21:20 UTC (permalink / raw)
To: linuxppc-dev
We split out the common bits of the P1020RDB device tree such that we
can reuse those bits between a 32-bit or 36-bit address map device tree.
We also update the P1020RDB device tree to utilize the new p1020 SoC dts
includes (fsl/p1020si-pre.dtsi & fsl/p1020si-post.dtsi).
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
arch/powerpc/boot/dts/p1020rdb.dts | 232 ++---------------------------------
arch/powerpc/boot/dts/p1020rdb.dtsi | 208 +++++++++++++++++++++++++++++++
2 files changed, 216 insertions(+), 224 deletions(-)
create mode 100644 arch/powerpc/boot/dts/p1020rdb.dtsi
diff --git a/arch/powerpc/boot/dts/p1020rdb.dts b/arch/powerpc/boot/dts/p1020rdb.dts
index b31e7ec..518bf99 100644
--- a/arch/powerpc/boot/dts/p1020rdb.dts
+++ b/arch/powerpc/boot/dts/p1020rdb.dts
@@ -9,245 +9,26 @@
* option) any later version.
*/
-/include/ "p1020si.dtsi"
-
+/include/ "fsl/p1020si-pre.dtsi"
/ {
model = "fsl,P1020RDB";
compatible = "fsl,P1020RDB";
- aliases {
- serial0 = &serial0;
- serial1 = &serial1;
- ethernet0 = &enet0;
- ethernet1 = &enet1;
- ethernet2 = &enet2;
- pci0 = &pci0;
- pci1 = &pci1;
- };
-
memory {
device_type = "memory";
};
- localbus@ffe05000 {
+ board_lbc: lbc: localbus@ffe05000 {
+ reg = <0 0xffe05000 0 0x1000>;
/* NOR, NAND Flashes and Vitesse 5 port L2 switch */
ranges = <0x0 0x0 0x0 0xef000000 0x01000000
0x1 0x0 0x0 0xffa00000 0x00040000
0x2 0x0 0x0 0xffb00000 0x00020000>;
-
- nor@0,0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "cfi-flash";
- reg = <0x0 0x0 0x1000000>;
- bank-width = <2>;
- device-width = <1>;
-
- partition@0 {
- /* This location must not be altered */
- /* 256KB for Vitesse 7385 Switch firmware */
- reg = <0x0 0x00040000>;
- label = "NOR (RO) Vitesse-7385 Firmware";
- read-only;
- };
-
- partition@40000 {
- /* 256KB for DTB Image */
- reg = <0x00040000 0x00040000>;
- label = "NOR (RO) DTB Image";
- read-only;
- };
-
- partition@80000 {
- /* 3.5 MB for Linux Kernel Image */
- reg = <0x00080000 0x00380000>;
- label = "NOR (RO) Linux Kernel Image";
- read-only;
- };
-
- partition@400000 {
- /* 11MB for JFFS2 based Root file System */
- reg = <0x00400000 0x00b00000>;
- label = "NOR (RW) JFFS2 Root File System";
- };
-
- partition@f00000 {
- /* This location must not be altered */
- /* 512KB for u-boot Bootloader Image */
- /* 512KB for u-boot Environment Variables */
- reg = <0x00f00000 0x00100000>;
- label = "NOR (RO) U-Boot Image";
- read-only;
- };
- };
-
- nand@1,0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,p1020-fcm-nand",
- "fsl,elbc-fcm-nand";
- reg = <0x1 0x0 0x40000>;
-
- partition@0 {
- /* This location must not be altered */
- /* 1MB for u-boot Bootloader Image */
- reg = <0x0 0x00100000>;
- label = "NAND (RO) U-Boot Image";
- read-only;
- };
-
- partition@100000 {
- /* 1MB for DTB Image */
- reg = <0x00100000 0x00100000>;
- label = "NAND (RO) DTB Image";
- read-only;
- };
-
- partition@200000 {
- /* 4MB for Linux Kernel Image */
- reg = <0x00200000 0x00400000>;
- label = "NAND (RO) Linux Kernel Image";
- read-only;
- };
-
- partition@600000 {
- /* 4MB for Compressed Root file System Image */
- reg = <0x00600000 0x00400000>;
- label = "NAND (RO) Compressed RFS Image";
- read-only;
- };
-
- partition@a00000 {
- /* 7MB for JFFS2 based Root file System */
- reg = <0x00a00000 0x00700000>;
- label = "NAND (RW) JFFS2 Root File System";
- };
-
- partition@1100000 {
- /* 15MB for JFFS2 based Root file System */
- reg = <0x01100000 0x00f00000>;
- label = "NAND (RW) Writable User area";
- };
- };
-
- L2switch@2,0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "vitesse-7385";
- reg = <0x2 0x0 0x20000>;
- };
-
};
- soc@ffe00000 {
- i2c@3000 {
- rtc@68 {
- compatible = "dallas,ds1339";
- reg = <0x68>;
- };
- };
-
- spi@7000 {
- flash@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "spansion,s25sl12801";
- reg = <0>;
- spi-max-frequency = <40000000>; /* input clock */
-
- partition@u-boot {
- /* 512KB for u-boot Bootloader Image */
- reg = <0x0 0x00080000>;
- label = "u-boot";
- read-only;
- };
-
- partition@dtb {
- /* 512KB for DTB Image */
- reg = <0x00080000 0x00080000>;
- label = "dtb";
- read-only;
- };
-
- partition@kernel {
- /* 4MB for Linux Kernel Image */
- reg = <0x00100000 0x00400000>;
- label = "kernel";
- read-only;
- };
-
- partition@fs {
- /* 4MB for Compressed RFS Image */
- reg = <0x00500000 0x00400000>;
- label = "file system";
- read-only;
- };
-
- partition@jffs-fs {
- /* 7MB for JFFS2 based RFS */
- reg = <0x00900000 0x00700000>;
- label = "file system jffs2";
- };
- };
- };
-
- mdio@24000 {
-
- phy0: ethernet-phy@0 {
- interrupt-parent = <&mpic>;
- interrupts = <3 1>;
- reg = <0x0>;
- };
-
- phy1: ethernet-phy@1 {
- interrupt-parent = <&mpic>;
- interrupts = <2 1>;
- reg = <0x1>;
- };
- };
-
- mdio@25000 {
-
- tbi0: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
- enet0: ethernet@b0000 {
- fixed-link = <1 1 1000 0 0>;
- phy-connection-type = "rgmii-id";
-
- };
-
- enet1: ethernet@b1000 {
- phy-handle = <&phy0>;
- tbi-handle = <&tbi0>;
- phy-connection-type = "sgmii";
-
- };
-
- enet2: ethernet@b2000 {
- phy-handle = <&phy1>;
- phy-connection-type = "rgmii-id";
-
- };
-
- usb@22000 {
- phy_type = "ulpi";
- };
-
- /* USB2 is shared with localbus, so it must be disabled
- by default. We can't put 'status = "disabled";' here
- since U-Boot doesn't clear the status property when
- it enables USB2. OTOH, U-Boot does create a new node
- when there isn't any. So, just comment it out.
- usb@23000 {
- phy_type = "ulpi";
- };
- */
-
+ board_soc: soc: soc@ffe00000 {
+ ranges = <0x0 0x0 0xffe00000 0x100000>;
};
pci0: pcie@ffe09000 {
@@ -280,3 +61,6 @@
};
};
};
+
+/include/ "p1020rdb.dtsi"
+/include/ "fsl/p1020si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/p1020rdb.dtsi b/arch/powerpc/boot/dts/p1020rdb.dtsi
new file mode 100644
index 0000000..1c50146
--- /dev/null
+++ b/arch/powerpc/boot/dts/p1020rdb.dtsi
@@ -0,0 +1,208 @@
+&board_lbc {
+ nor@0,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "cfi-flash";
+ reg = <0x0 0x0 0x1000000>;
+ bank-width = <2>;
+ device-width = <1>;
+
+ partition@0 {
+ /* This location must not be altered */
+ /* 256KB for Vitesse 7385 Switch firmware */
+ reg = <0x0 0x00040000>;
+ label = "NOR (RO) Vitesse-7385 Firmware";
+ read-only;
+ };
+
+ partition@40000 {
+ /* 256KB for DTB Image */
+ reg = <0x00040000 0x00040000>;
+ label = "NOR (RO) DTB Image";
+ read-only;
+ };
+
+ partition@80000 {
+ /* 3.5 MB for Linux Kernel Image */
+ reg = <0x00080000 0x00380000>;
+ label = "NOR (RO) Linux Kernel Image";
+ read-only;
+ };
+
+ partition@400000 {
+ /* 11MB for JFFS2 based Root file System */
+ reg = <0x00400000 0x00b00000>;
+ label = "NOR (RW) JFFS2 Root File System";
+ };
+
+ partition@f00000 {
+ /* This location must not be altered */
+ /* 512KB for u-boot Bootloader Image */
+ /* 512KB for u-boot Environment Variables */
+ reg = <0x00f00000 0x00100000>;
+ label = "NOR (RO) U-Boot Image";
+ read-only;
+ };
+ };
+
+ nand@1,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,p1020-fcm-nand",
+ "fsl,elbc-fcm-nand";
+ reg = <0x1 0x0 0x40000>;
+
+ partition@0 {
+ /* This location must not be altered */
+ /* 1MB for u-boot Bootloader Image */
+ reg = <0x0 0x00100000>;
+ label = "NAND (RO) U-Boot Image";
+ read-only;
+ };
+
+ partition@100000 {
+ /* 1MB for DTB Image */
+ reg = <0x00100000 0x00100000>;
+ label = "NAND (RO) DTB Image";
+ read-only;
+ };
+
+ partition@200000 {
+ /* 4MB for Linux Kernel Image */
+ reg = <0x00200000 0x00400000>;
+ label = "NAND (RO) Linux Kernel Image";
+ read-only;
+ };
+
+ partition@600000 {
+ /* 4MB for Compressed Root file System Image */
+ reg = <0x00600000 0x00400000>;
+ label = "NAND (RO) Compressed RFS Image";
+ read-only;
+ };
+
+ partition@a00000 {
+ /* 7MB for JFFS2 based Root file System */
+ reg = <0x00a00000 0x00700000>;
+ label = "NAND (RW) JFFS2 Root File System";
+ };
+
+ partition@1100000 {
+ /* 15MB for JFFS2 based Root file System */
+ reg = <0x01100000 0x00f00000>;
+ label = "NAND (RW) Writable User area";
+ };
+ };
+
+ L2switch@2,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "vitesse-7385";
+ reg = <0x2 0x0 0x20000>;
+ };
+};
+
+&board_soc {
+ i2c@3000 {
+ rtc@68 {
+ compatible = "dallas,ds1339";
+ reg = <0x68>;
+ };
+ };
+
+ spi@7000 {
+ flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "spansion,s25sl12801";
+ reg = <0>;
+ spi-max-frequency = <40000000>; /* input clock */
+
+ partition@u-boot {
+ /* 512KB for u-boot Bootloader Image */
+ reg = <0x0 0x00080000>;
+ label = "u-boot";
+ read-only;
+ };
+
+ partition@dtb {
+ /* 512KB for DTB Image */
+ reg = <0x00080000 0x00080000>;
+ label = "dtb";
+ read-only;
+ };
+
+ partition@kernel {
+ /* 4MB for Linux Kernel Image */
+ reg = <0x00100000 0x00400000>;
+ label = "kernel";
+ read-only;
+ };
+
+ partition@fs {
+ /* 4MB for Compressed RFS Image */
+ reg = <0x00500000 0x00400000>;
+ label = "file system";
+ read-only;
+ };
+
+ partition@jffs-fs {
+ /* 7MB for JFFS2 based RFS */
+ reg = <0x00900000 0x00700000>;
+ label = "file system jffs2";
+ };
+ };
+ };
+
+ mdio@24000 {
+ phy0: ethernet-phy@0 {
+ interrupt-parent = <&mpic>;
+ interrupts = <3 1>;
+ reg = <0x0>;
+ };
+
+ phy1: ethernet-phy@1 {
+ interrupt-parent = <&mpic>;
+ interrupts = <2 1>;
+ reg = <0x1>;
+ };
+ };
+
+ mdio@25000 {
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+ enet0: ethernet@b0000 {
+ fixed-link = <1 1 1000 0 0>;
+ phy-connection-type = "rgmii-id";
+
+ };
+
+ enet1: ethernet@b1000 {
+ phy-handle = <&phy0>;
+ tbi-handle = <&tbi0>;
+ phy-connection-type = "sgmii";
+ };
+
+ enet2: ethernet@b2000 {
+ phy-handle = <&phy1>;
+ phy-connection-type = "rgmii-id";
+ };
+
+ usb@22000 {
+ phy_type = "ulpi";
+ };
+
+ /* USB2 is shared with localbus, so it must be disabled
+ by default. We can't put 'status = "disabled";' here
+ since U-Boot doesn't clear the status property when
+ it enables USB2. OTOH, U-Boot does create a new node
+ when there isn't any. So, just comment it out.
+ usb@23000 {
+ phy_type = "ulpi";
+ };
+ */
+};
--
1.7.3.4
^ permalink raw reply related [flat|nested] 19+ messages in thread
* [PATCH 11/11] powerpc/85xx: Add P1020RDB 36-bit address map device tree
2011-10-22 21:20 ` [PATCH 10/11] powerpc/85xx: Rework P1020RDB " Kumar Gala
@ 2011-10-22 21:20 ` Kumar Gala
0 siblings, 0 replies; 19+ messages in thread
From: Kumar Gala @ 2011-10-22 21:20 UTC (permalink / raw)
To: linuxppc-dev
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
arch/powerpc/boot/dts/p1020rdb_36b.dts | 66 ++++++++++++++++++++++++++++++++
1 files changed, 66 insertions(+), 0 deletions(-)
create mode 100644 arch/powerpc/boot/dts/p1020rdb_36b.dts
diff --git a/arch/powerpc/boot/dts/p1020rdb_36b.dts b/arch/powerpc/boot/dts/p1020rdb_36b.dts
new file mode 100644
index 0000000..bdbdb60
--- /dev/null
+++ b/arch/powerpc/boot/dts/p1020rdb_36b.dts
@@ -0,0 +1,66 @@
+/*
+ * P1020 RDB Device Tree Source (36-bit address map)
+ *
+ * Copyright 2009-2011 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/include/ "fsl/p1020si-pre.dtsi"
+/ {
+ model = "fsl,P1020RDB";
+ compatible = "fsl,P1020RDB";
+
+ memory {
+ device_type = "memory";
+ };
+
+ board_lbc: lbc: localbus@fffe05000 {
+ reg = <0xf 0xffe05000 0 0x1000>;
+
+ /* NOR, NAND Flashes and Vitesse 5 port L2 switch */
+ ranges = <0x0 0x0 0xf 0xef000000 0x01000000
+ 0x1 0x0 0xf 0xffa00000 0x00040000
+ 0x2 0x0 0xf 0xffb00000 0x00020000>;
+ };
+
+ board_soc: soc: soc@fffe00000 {
+ ranges = <0x0 0xf 0xffe00000 0x100000>;
+ };
+
+ pci0: pcie@fffe09000 {
+ reg = <0xf 0xffe09000 0 0x1000>;
+ ranges = <0x2000000 0x0 0xc0000000 0xc 0x20000000 0x0 0x20000000
+ 0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>;
+ pcie@0 {
+ ranges = <0x2000000 0x0 0xc0000000
+ 0x2000000 0x0 0xc0000000
+ 0x0 0x20000000
+
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x100000>;
+ };
+ };
+
+ pci1: pcie@fffe0a000 {
+ reg = <0xf 0xffe0a000 0 0x1000>;
+ ranges = <0x2000000 0x0 0x80000000 0xc 0x00000000 0x0 0x20000000
+ 0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>;
+ pcie@0 {
+ ranges = <0x2000000 0x0 0x80000000
+ 0x2000000 0x0 0x80000000
+ 0x0 0x20000000
+
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x100000>;
+ };
+ };
+};
+
+/include/ "p1020rdb.dtsi"
+/include/ "fsl/p1020si-post.dtsi"
--
1.7.3.4
^ permalink raw reply related [flat|nested] 19+ messages in thread
* Re: [PATCH 03/11] powerpc/85xx: Rework PCI nodes on P1020RDB
2011-10-22 21:20 ` [PATCH 03/11] powerpc/85xx: Rework PCI nodes on P1020RDB Kumar Gala
2011-10-22 21:20 ` [PATCH 04/11] powerpc/85xx: Update SPI binding to match binding spec for P1020RDB Kumar Gala
@ 2011-10-23 14:37 ` Tabi Timur-B04825
2011-10-24 14:02 ` Kumar Gala
1 sibling, 1 reply; 19+ messages in thread
From: Tabi Timur-B04825 @ 2011-10-23 14:37 UTC (permalink / raw)
To: Kumar Gala; +Cc: linuxppc-dev
On Sat, Oct 22, 2011 at 4:20 PM, Kumar Gala <galak@kernel.crashing.org> wro=
te:
> * Move SoC specific details like irq mapping to SoC dtsi
> * Update interrupt property to cover both error interrupt and PCIe
> =A0runtime interrupts
Are we going to be doing this for all our device trees? If so, then I
think we need to document what properties the board dts should be
defining when it includes a node from a dtsi. Something like this:
dtsi:
pcie@0 {
/* dts should define 'reg' and 'ranges' */
reg =3D <0 0 0 0 0>;
#interrupt-cells =3D <1>;
I suppose it's obvious that 'reg' and 'ranges' should be defined, so
this isn't the best example. But we should document if any other
properties should be defined.
For example, the SSI nodes contain a bunch of SOC- and board-specific
properties.
--=20
Timur Tabi
Linux kernel developer at Freescale=
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [PATCH 03/11] powerpc/85xx: Rework PCI nodes on P1020RDB
2011-10-23 14:37 ` [PATCH 03/11] powerpc/85xx: Rework PCI nodes on P1020RDB Tabi Timur-B04825
@ 2011-10-24 14:02 ` Kumar Gala
2011-10-24 14:05 ` Timur Tabi
0 siblings, 1 reply; 19+ messages in thread
From: Kumar Gala @ 2011-10-24 14:02 UTC (permalink / raw)
To: Tabi Timur-B04825; +Cc: linuxppc-dev
On Oct 23, 2011, at 9:37 AM, Tabi Timur-B04825 wrote:
> On Sat, Oct 22, 2011 at 4:20 PM, Kumar Gala =
<galak@kernel.crashing.org> wrote:
>> * Move SoC specific details like irq mapping to SoC dtsi
>> * Update interrupt property to cover both error interrupt and PCIe
>> runtime interrupts
>=20
> Are we going to be doing this for all our device trees? If so, then I
> think we need to document what properties the board dts should be
> defining when it includes a node from a dtsi. Something like this:
Yes, I intend we do this as much as possible.
> dtsi:
> pcie@0 {
> /* dts should define 'reg' and 'ranges' */
> reg =3D <0 0 0 0 0>;
> #interrupt-cells =3D <1>;
>=20
> I suppose it's obvious that 'reg' and 'ranges' should be defined, so
> this isn't the best example. But we should document if any other
> properties should be defined.
>=20
> For example, the SSI nodes contain a bunch of SOC- and board-specific
> properties.
I would have hoped the bindings had made it clear already what was board =
info vs what was SoC.
If not, they should be clarify that in the binding specs.
- k=
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [PATCH 03/11] powerpc/85xx: Rework PCI nodes on P1020RDB
2011-10-24 14:02 ` Kumar Gala
@ 2011-10-24 14:05 ` Timur Tabi
0 siblings, 0 replies; 19+ messages in thread
From: Timur Tabi @ 2011-10-24 14:05 UTC (permalink / raw)
To: Kumar Gala; +Cc: linuxppc-dev
Kumar Gala wrote:
> I would have hoped the bindings had made it clear already what was board info vs what was SoC.
When it comes to device trees, I never assume anything is "clear".
> If not, they should be clarify that in the binding specs.
I'm okay with that.
--
Timur Tabi
Linux kernel developer at Freescale
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [PATCH 06/11] powerpc/85xx: Add ethernet magic packet property to P1020 device tree
2011-10-22 21:20 ` [PATCH 06/11] powerpc/85xx: Add ethernet magic packet property to P1020 device tree Kumar Gala
2011-10-22 21:20 ` [PATCH 07/11] powerpc/85xx: p1020si.dtsi update interrupt handling Kumar Gala
@ 2011-10-25 22:19 ` Scott Wood
2011-10-26 3:35 ` Kumar Gala
1 sibling, 1 reply; 19+ messages in thread
From: Scott Wood @ 2011-10-25 22:19 UTC (permalink / raw)
To: Kumar Gala; +Cc: linuxppc-dev
On 10/22/2011 04:20 PM, Kumar Gala wrote:
> All eTSEC2 controllers support waking on magic packet so fixup device
> tree to report that.
If they *all* support it, we can make the driver rely on the compatible
instead.
-Scott
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [PATCH 06/11] powerpc/85xx: Add ethernet magic packet property to P1020 device tree
2011-10-25 22:19 ` [PATCH 06/11] powerpc/85xx: Add ethernet magic packet property to P1020 " Scott Wood
@ 2011-10-26 3:35 ` Kumar Gala
2011-10-26 16:02 ` Scott Wood
0 siblings, 1 reply; 19+ messages in thread
From: Kumar Gala @ 2011-10-26 3:35 UTC (permalink / raw)
To: Scott Wood; +Cc: linuxppc-dev
On Oct 25, 2011, at 5:19 PM, Scott Wood wrote:
> On 10/22/2011 04:20 PM, Kumar Gala wrote:
>> All eTSEC2 controllers support waking on magic packet so fixup device
>> tree to report that.
>=20
> If they *all* support it, we can make the driver rely on the =
compatible
> instead.
>=20
> -Scott
I think this might have originated on eTSEC v1, in which all controllers =
don't support it.
I'm not against removing it & just using compatible but don't know =
enough about these nodes to comment.
- k=
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [PATCH 06/11] powerpc/85xx: Add ethernet magic packet property to P1020 device tree
2011-10-26 3:35 ` Kumar Gala
@ 2011-10-26 16:02 ` Scott Wood
0 siblings, 0 replies; 19+ messages in thread
From: Scott Wood @ 2011-10-26 16:02 UTC (permalink / raw)
To: Kumar Gala; +Cc: linuxppc-dev
On 10/25/2011 10:35 PM, Kumar Gala wrote:
>
> On Oct 25, 2011, at 5:19 PM, Scott Wood wrote:
>
>> On 10/22/2011 04:20 PM, Kumar Gala wrote:
>>> All eTSEC2 controllers support waking on magic packet so fixup device
>>> tree to report that.
>>
>> If they *all* support it, we can make the driver rely on the compatible
>> instead.
>>
>> -Scott
>
> I think this might have originated on eTSEC v1, in which all controllers don't support it.
Sure, I was just talking about nodes with fsl,etsec2 -- especially if we
have device trees already out there that are missing the property.
Easier to change the driver.
-Scott
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [PATCH 01/11] powerpc/85xx: Add 'fsl, pq3-gpio' compatiable for GPIO driver
2011-10-22 21:20 [PATCH 01/11] powerpc/85xx: Add 'fsl, pq3-gpio' compatiable for GPIO driver Kumar Gala
2011-10-22 21:20 ` [PATCH 02/11] powerpc/85xx: Simplify P1020RDB CAMP dts using includes Kumar Gala
@ 2011-11-03 17:59 ` Kumar Gala
1 sibling, 0 replies; 19+ messages in thread
From: Kumar Gala @ 2011-11-03 17:59 UTC (permalink / raw)
To: Kumar Gala; +Cc: linuxppc-dev
On Oct 22, 2011, at 4:20 PM, Kumar Gala wrote:
> Support MPC85xx platforms outside of MPC8572/MPC8536. The
> MPC8572/MPC8536 have an erratum that is worked around based on having
> "fsl,mpc8572-gpio" in the compatiable list. All other MPC85xx SoCs
> don't require this workaround and thus utilize the 'fsl,pq3-gpio'
> compatiable.
>
> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
> ---
> drivers/gpio/gpio-mpc8xxx.c | 1 +
> 1 files changed, 1 insertions(+), 0 deletions(-)
applied
- k
^ permalink raw reply [flat|nested] 19+ messages in thread
* [PATCH 05/11] powerpc/85xx: Update P1020 SEC3.3 node to match actual SoC HW
2011-11-10 16:07 ` [PATCH 04/11] powerpc/85xx: Update SPI binding to match binding spec for P1020RDB Kumar Gala
@ 2011-11-10 16:07 ` Kumar Gala
0 siblings, 0 replies; 19+ messages in thread
From: Kumar Gala @ 2011-11-10 16:07 UTC (permalink / raw)
To: linuxppc-dev
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
arch/powerpc/boot/dts/p1020si.dtsi | 9 +++++----
1 files changed, 5 insertions(+), 4 deletions(-)
diff --git a/arch/powerpc/boot/dts/p1020si.dtsi b/arch/powerpc/boot/dts/p1020si.dtsi
index 25e10cf..5514e1d 100644
--- a/arch/powerpc/boot/dts/p1020si.dtsi
+++ b/arch/powerpc/boot/dts/p1020si.dtsi
@@ -305,15 +305,16 @@
};
crypto@30000 {
- compatible = "fsl,sec3.1", "fsl,sec3.0", "fsl,sec2.4",
- "fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0";
+ compatible = "fsl,sec3.3", "fsl,sec3.1", "fsl,sec3.0",
+ "fsl,sec2.4", "fsl,sec2.2", "fsl,sec2.1",
+ "fsl,sec2.0";
reg = <0x30000 0x10000>;
interrupts = <45 2 58 2>;
interrupt-parent = <&mpic>;
fsl,num-channels = <4>;
fsl,channel-fifo-len = <24>;
- fsl,exec-units-mask = <0xbfe>;
- fsl,descriptor-types-mask = <0x3ab0ebf>;
+ fsl,exec-units-mask = <0x97c>;
+ fsl,descriptor-types-mask = <0x3a30abf>;
};
mpic: pic@40000 {
--
1.7.3.4
^ permalink raw reply related [flat|nested] 19+ messages in thread
end of thread, other threads:[~2011-11-10 16:07 UTC | newest]
Thread overview: 19+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2011-10-22 21:20 [PATCH 01/11] powerpc/85xx: Add 'fsl, pq3-gpio' compatiable for GPIO driver Kumar Gala
2011-10-22 21:20 ` [PATCH 02/11] powerpc/85xx: Simplify P1020RDB CAMP dts using includes Kumar Gala
2011-10-22 21:20 ` [PATCH 03/11] powerpc/85xx: Rework PCI nodes on P1020RDB Kumar Gala
2011-10-22 21:20 ` [PATCH 04/11] powerpc/85xx: Update SPI binding to match binding spec for P1020RDB Kumar Gala
2011-10-22 21:20 ` [PATCH 05/11] powerpc/85xx: Update P1020 SEC3.3 node to match actual SoC HW Kumar Gala
2011-10-22 21:20 ` [PATCH 06/11] powerpc/85xx: Add ethernet magic packet property to P1020 device tree Kumar Gala
2011-10-22 21:20 ` [PATCH 07/11] powerpc/85xx: p1020si.dtsi update interrupt handling Kumar Gala
2011-10-22 21:20 ` [PATCH 08/11] powerpc/85xx: create dts components to build up an SoC Kumar Gala
2011-10-22 21:20 ` [PATCH 09/11] powerpc/85xx: Rework P1020 SoC device tree Kumar Gala
2011-10-22 21:20 ` [PATCH 10/11] powerpc/85xx: Rework P1020RDB " Kumar Gala
2011-10-22 21:20 ` [PATCH 11/11] powerpc/85xx: Add P1020RDB 36-bit address map " Kumar Gala
2011-10-25 22:19 ` [PATCH 06/11] powerpc/85xx: Add ethernet magic packet property to P1020 " Scott Wood
2011-10-26 3:35 ` Kumar Gala
2011-10-26 16:02 ` Scott Wood
2011-10-23 14:37 ` [PATCH 03/11] powerpc/85xx: Rework PCI nodes on P1020RDB Tabi Timur-B04825
2011-10-24 14:02 ` Kumar Gala
2011-10-24 14:05 ` Timur Tabi
2011-11-03 17:59 ` [PATCH 01/11] powerpc/85xx: Add 'fsl, pq3-gpio' compatiable for GPIO driver Kumar Gala
2011-11-10 16:06 Kumar Gala
2011-11-10 16:07 ` [PATCH 02/11] powerpc/85xx: Simplify P1020RDB CAMP dts using includes Kumar Gala
2011-11-10 16:07 ` [PATCH 03/11] powerpc/85xx: Rework PCI nodes on P1020RDB Kumar Gala
2011-11-10 16:07 ` [PATCH 04/11] powerpc/85xx: Update SPI binding to match binding spec for P1020RDB Kumar Gala
2011-11-10 16:07 ` [PATCH 05/11] powerpc/85xx: Update P1020 SEC3.3 node to match actual SoC HW Kumar Gala
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).