* [PATCH][v2] powerpc/85xx: Rework P1022DS device tree
@ 2011-11-17 14:32 Kumar Gala
2011-11-17 14:32 ` [PATCH][v2] powerpc/85xx: Rework P2041RDB " Kumar Gala
` (2 more replies)
0 siblings, 3 replies; 6+ messages in thread
From: Kumar Gala @ 2011-11-17 14:32 UTC (permalink / raw)
To: linuxppc-dev
Utilize new split between board & SoC, and new SoC device trees split
into pre & post utilizing 'template' includes for SoC IP blocks.
Other changes include:
* Reworked PCIe nodes to allow supportin IRQs for controller (errors)
and moved PCI device IRQs down to virtual bridge level
* Changed GPIO compatiable from 'fsl,mpc8572-gpio' to 'fsl,pq3-gpio' as the
'mpc8572' compatiable is to deal with a 'mpc8572' specific to an erratum
* Updated spi node to new espi binding specification
* Renamed SDHC node from 'sdhci' to 'sdhc'
* Added usb node for 2nd usb controller
* Dropping "fsl,p1022-IP..." from compatibles for standard blocks
* Fixed bug in local bus range node for CS2, was maping to
0x0 0x0xffa00000 instead of 0xf 0xffa00000
* Fixed localbus reg property should have been 0xf 0xffe05000
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
v2: fixed localbus reg property
arch/powerpc/boot/dts/fsl/p1022si-post.dtsi | 235 +++++++++++++++
arch/powerpc/boot/dts/fsl/p1022si-pre.dtsi | 68 +++++
arch/powerpc/boot/dts/p1022ds.dts | 435 +-------------------------
3 files changed, 320 insertions(+), 418 deletions(-)
create mode 100644 arch/powerpc/boot/dts/fsl/p1022si-post.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/p1022si-pre.dtsi
diff --git a/arch/powerpc/boot/dts/fsl/p1022si-post.dtsi b/arch/powerpc/boot/dts/fsl/p1022si-post.dtsi
new file mode 100644
index 0000000..16239b1
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p1022si-post.dtsi
@@ -0,0 +1,235 @@
+/*
+ * P1022/P1013 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&lbc {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "fsl,p1022-elbc", "fsl,elbc", "simple-bus";
+ interrupts = <19 2 0 0>;
+};
+
+/* controller at 0x9000 */
+&pci0 {
+ compatible = "fsl,p1022-pcie";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0 255>;
+ clock-frequency = <33333333>;
+ interrupts = <16 2 0 0>;
+
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <16 2 0 0>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0x0 0x0 0x1 &mpic 0x4 0x1 0x0 0x0
+ 0000 0x0 0x0 0x2 &mpic 0x5 0x1 0x0 0x0
+ 0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0
+ 0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0
+ >;
+ };
+};
+
+/* controller at 0xa000 */
+&pci1 {
+ compatible = "fsl,p1022-pcie";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0 255>;
+ clock-frequency = <33333333>;
+ interrupts = <16 2 0 0>;
+
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <16 2 0 0>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0
+ 0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0
+ 0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0
+ 0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0
+ >;
+ };
+};
+
+/* controller at 0xb000 */
+&pci2 {
+ compatible = "fsl,p1022-pcie";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0 255>;
+ clock-frequency = <33333333>;
+ interrupts = <16 2 0 0>;
+
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <16 2 0 0>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0x0 0x0 0x1 &mpic 0x8 0x1 0x0 0x0
+ 0000 0x0 0x0 0x2 &mpic 0x9 0x1 0x0 0x0
+ 0000 0x0 0x0 0x3 &mpic 0xa 0x1 0x0 0x0
+ 0000 0x0 0x0 0x4 &mpic 0xb 0x1 0x0 0x0
+ >;
+ };
+};
+
+&soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "soc";
+ compatible = "fsl,p1022-immr", "simple-bus";
+ bus-frequency = <0>; // Filled out by uboot.
+
+ ecm-law@0 {
+ compatible = "fsl,ecm-law";
+ reg = <0x0 0x1000>;
+ fsl,num-laws = <12>;
+ };
+
+ ecm@1000 {
+ compatible = "fsl,p1022-ecm", "fsl,ecm";
+ reg = <0x1000 0x1000>;
+ interrupts = <16 2 0 0>;
+ };
+
+ memory-controller@2000 {
+ compatible = "fsl,p1022-memory-controller";
+ reg = <0x2000 0x1000>;
+ interrupts = <16 2 0 0>;
+ };
+
+/include/ "pq3-i2c-0.dtsi"
+/include/ "pq3-i2c-1.dtsi"
+/include/ "pq3-duart-0.dtsi"
+/include/ "pq3-espi-0.dtsi"
+ spi@7000 {
+ fsl,espi-num-chipselects = <4>;
+ };
+
+/include/ "pq3-dma-1.dtsi"
+ dma@c300 {
+ dma00: dma-channel@0 {
+ compatible = "fsl,ssi-dma-channel";
+ };
+ dma01: dma-channel@80 {
+ compatible = "fsl,ssi-dma-channel";
+ };
+ };
+
+/include/ "pq3-gpio-0.dtsi"
+
+ display@10000 {
+ compatible = "fsl,diu", "fsl,p1022-diu";
+ reg = <0x10000 1000>;
+ interrupts = <64 2 0 0>;
+ };
+
+ ssi@15000 {
+ compatible = "fsl,mpc8610-ssi";
+ cell-index = <0>;
+ reg = <0x15000 0x100>;
+ interrupts = <75 2 0 0>;
+ fsl,playback-dma = <&dma00>;
+ fsl,capture-dma = <&dma01>;
+ fsl,fifo-depth = <15>;
+ };
+
+/include/ "pq3-sata2-0.dtsi"
+/include/ "pq3-sata2-1.dtsi"
+
+ L2: l2-cache-controller@20000 {
+ compatible = "fsl,p1022-l2-cache-controller";
+ reg = <0x20000 0x1000>;
+ cache-line-size = <32>; // 32 bytes
+ cache-size = <0x40000>; // L2,256K
+ interrupts = <16 2 0 0>;
+ };
+
+/include/ "pq3-dma-0.dtsi"
+/include/ "pq3-usb2-dr-0.dtsi"
+/include/ "pq3-usb2-dr-1.dtsi"
+
+/include/ "pq3-esdhc-0.dtsi"
+ sdhc@2e000 {
+ fsl,sdhci-auto-cmd12;
+ };
+
+/include/ "pq3-sec3.3-0.dtsi"
+/include/ "pq3-mpic.dtsi"
+/include/ "pq3-mpic-timer-B.dtsi"
+
+/include/ "pq3-etsec2-0.dtsi"
+ enet0: enet0_grp2: ethernet@b0000 {
+ };
+
+/include/ "pq3-etsec2-1.dtsi"
+ enet1: enet1_grp2: ethernet@b1000 {
+ };
+
+ global-utilities@e0000 {
+ compatible = "fsl,p1022-guts";
+ reg = <0xe0000 0x1000>;
+ fsl,has-rstcr;
+ };
+
+ power@e0070{
+ compatible = "fsl,mpc8536-pmc", "fsl,mpc8548-pmc";
+ reg = <0xe0070 0x20>;
+ };
+
+};
+
+/include/ "pq3-etsec2-grp2-0.dtsi"
+/include/ "pq3-etsec2-grp2-1.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/p1022si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p1022si-pre.dtsi
new file mode 100644
index 0000000..e930f4f
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p1022si-pre.dtsi
@@ -0,0 +1,68 @@
+/*
+ * P1022/P1013 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+/ {
+ compatible = "fsl,P1022";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-parent = <&mpic>;
+
+ aliases {
+ serial0 = &serial0;
+ serial1 = &serial1;
+ ethernet0 = &enet0;
+ ethernet1 = &enet1;
+ pci0 = &pci0;
+ pci1 = &pci1;
+ pci2 = &pci2;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,P1022@0 {
+ device_type = "cpu";
+ reg = <0x0>;
+ next-level-cache = <&L2>;
+ };
+
+ PowerPC,P1022@1 {
+ device_type = "cpu";
+ reg = <0x1>;
+ next-level-cache = <&L2>;
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/p1022ds.dts b/arch/powerpc/boot/dts/p1022ds.dts
index b9b8719..24a73e9 100644
--- a/arch/powerpc/boot/dts/p1022ds.dts
+++ b/arch/powerpc/boot/dts/p1022ds.dts
@@ -8,55 +8,20 @@
* kind, whether express or implied.
*/
-/dts-v1/;
+/include/ "fsl/p1022si-pre.dtsi"
/ {
- model = "fsl,P1022";
+ model = "fsl,P1022DS";
compatible = "fsl,P1022DS";
- #address-cells = <2>;
- #size-cells = <2>;
- interrupt-parent = <&mpic>;
-
- aliases {
- ethernet0 = &enet0;
- ethernet1 = &enet1;
- serial0 = &serial0;
- serial1 = &serial1;
- pci0 = &pci0;
- pci1 = &pci1;
- pci2 = &pci2;
- };
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- PowerPC,P1022@0 {
- device_type = "cpu";
- reg = <0x0>;
- next-level-cache = <&L2>;
- };
-
- PowerPC,P1022@1 {
- device_type = "cpu";
- reg = <0x1>;
- next-level-cache = <&L2>;
- };
- };
memory {
device_type = "memory";
};
- localbus@fffe05000 {
- #address-cells = <2>;
- #size-cells = <1>;
- compatible = "fsl,p1022-elbc", "fsl,elbc", "simple-bus";
- reg = <0 0xffe05000 0 0x1000>;
- interrupts = <19 2 0 0>;
-
+ lbc: localbus@fffe05000 {
+ reg = <0xf 0xffe05000 0 0x1000>;
ranges = <0x0 0x0 0xf 0xe8000000 0x08000000
0x1 0x0 0xf 0xe0000000 0x08000000
- 0x2 0x0 0x0 0xffa00000 0x00040000
+ 0x2 0x0 0xf 0xffa00000 0x00040000
0x3 0x0 0xf 0xffdf0000 0x00008000>;
nor@0,0 {
@@ -161,51 +126,10 @@
};
};
- soc@fffe00000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "soc";
- compatible = "fsl,p1022-immr", "simple-bus";
+ soc: soc@fffe00000 {
ranges = <0x0 0xf 0xffe00000 0x100000>;
- bus-frequency = <0>; // Filled out by uboot.
-
- ecm-law@0 {
- compatible = "fsl,ecm-law";
- reg = <0x0 0x1000>;
- fsl,num-laws = <12>;
- };
-
- ecm@1000 {
- compatible = "fsl,p1022-ecm", "fsl,ecm";
- reg = <0x1000 0x1000>;
- interrupts = <16 2 0 0>;
- };
-
- memory-controller@2000 {
- compatible = "fsl,p1022-memory-controller";
- reg = <0x2000 0x1000>;
- interrupts = <16 2 0 0>;
- };
-
- i2c@3000 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <0>;
- compatible = "fsl-i2c";
- reg = <0x3000 0x100>;
- interrupts = <43 2 0 0>;
- dfsrr;
- };
i2c@3100 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <1>;
- compatible = "fsl-i2c";
- reg = <0x3100 0x100>;
- interrupts = <43 2 0 0>;
- dfsrr;
-
wm8776:codec@1a {
compatible = "wlf,wm8776";
reg = <0x1a>;
@@ -216,41 +140,14 @@
};
};
- serial0: serial@4500 {
- cell-index = <0>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4500 0x100>;
- clock-frequency = <0>;
- interrupts = <42 2 0 0>;
- };
-
- serial1: serial@4600 {
- cell-index = <1>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4600 0x100>;
- clock-frequency = <0>;
- interrupts = <42 2 0 0>;
- };
-
spi@7000 {
- cell-index = <0>;
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,espi";
- reg = <0x7000 0x1000>;
- interrupts = <59 0x2 0 0>;
- espi,num-ss-bits = <4>;
- mode = "cpu";
-
- fsl_m25p80@0 {
+ flash@0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "fsl,espi-flash";
+ compatible = "spansion,s25sl12801";
reg = <0>;
- linux,modalias = "fsl_m25p80";
spi-max-frequency = <40000000>; /* input clock */
+
partition@0 {
label = "u-boot-spi";
reg = <0x00000000 0x00100000>;
@@ -274,115 +171,20 @@
};
ssi@15000 {
- compatible = "fsl,mpc8610-ssi";
- cell-index = <0>;
- reg = <0x15000 0x100>;
- interrupts = <75 2 0 0>;
fsl,mode = "i2s-slave";
codec-handle = <&wm8776>;
- fsl,playback-dma = <&dma00>;
- fsl,capture-dma = <&dma01>;
- fsl,fifo-depth = <15>;
fsl,ssi-asynchronous;
};
- dma@c300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,eloplus-dma";
- reg = <0xc300 0x4>;
- ranges = <0x0 0xc100 0x200>;
- cell-index = <1>;
- dma00: dma-channel@0 {
- compatible = "fsl,ssi-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupts = <76 2 0 0>;
- };
- dma01: dma-channel@80 {
- compatible = "fsl,ssi-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupts = <77 2 0 0>;
- };
- dma-channel@100 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupts = <78 2 0 0>;
- };
- dma-channel@180 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupts = <79 2 0 0>;
- };
- };
-
- gpio: gpio-controller@f000 {
- #gpio-cells = <2>;
- compatible = "fsl,mpc8572-gpio";
- reg = <0xf000 0x100>;
- interrupts = <47 0x2 0 0>;
- gpio-controller;
- };
-
- L2: l2-cache-controller@20000 {
- compatible = "fsl,p1022-l2-cache-controller";
- reg = <0x20000 0x1000>;
- cache-line-size = <32>; // 32 bytes
- cache-size = <0x40000>; // L2, 256K
- interrupts = <16 2 0 0>;
- };
-
- dma@21300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,eloplus-dma";
- reg = <0x21300 0x4>;
- ranges = <0x0 0x21100 0x200>;
- cell-index = <0>;
- dma-channel@0 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupts = <20 2 0 0>;
- };
- dma-channel@80 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupts = <21 2 0 0>;
- };
- dma-channel@100 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupts = <22 2 0 0>;
- };
- dma-channel@180 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupts = <23 2 0 0>;
- };
- };
-
usb@22000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl-usb2-dr";
- reg = <0x22000 0x1000>;
- interrupts = <28 0x2 0 0>;
phy_type = "ulpi";
};
- mdio@24000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,etsec2-mdio";
- reg = <0x24000 0x1000 0xb0030 0x4>;
+ usb@23000 {
+ status = "disabled";
+ };
+ mdio@24000 {
phy0: ethernet-phy@0 {
interrupts = <3 1 0 0>;
reg = <0x1>;
@@ -393,187 +195,22 @@
};
};
- mdio@25000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,etsec2-mdio";
- reg = <0x25000 0x1000 0xb1030 0x4>;
- };
-
- enet0: ethernet@B0000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <0>;
- device_type = "network";
- model = "eTSEC";
- compatible = "fsl,etsec2";
- fsl,num_rx_queues = <0x8>;
- fsl,num_tx_queues = <0x8>;
- fsl,magic-packet;
- fsl,wake-on-filer;
- local-mac-address = [ 00 00 00 00 00 00 ];
+ ethernet@b0000 {
phy-handle = <&phy0>;
phy-connection-type = "rgmii-id";
- queue-group@0{
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0xB0000 0x1000>;
- interrupts = <29 2 0 0 30 2 0 0 34 2 0 0>;
- };
- queue-group@1{
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0xB4000 0x1000>;
- interrupts = <17 2 0 0 18 2 0 0 24 2 0 0>;
- };
};
- enet1: ethernet@B1000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <0>;
- device_type = "network";
- model = "eTSEC";
- compatible = "fsl,etsec2";
- fsl,num_rx_queues = <0x8>;
- fsl,num_tx_queues = <0x8>;
- local-mac-address = [ 00 00 00 00 00 00 ];
+ ethernet@b1000 {
phy-handle = <&phy1>;
phy-connection-type = "rgmii-id";
- queue-group@0{
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0xB1000 0x1000>;
- interrupts = <35 2 0 0 36 2 0 0 40 2 0 0>;
- };
- queue-group@1{
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0xB5000 0x1000>;
- interrupts = <51 2 0 0 52 2 0 0 67 2 0 0>;
- };
- };
-
- sdhci@2e000 {
- compatible = "fsl,p1022-esdhc", "fsl,esdhc";
- reg = <0x2e000 0x1000>;
- interrupts = <72 0x2 0 0>;
- fsl,sdhci-auto-cmd12;
- /* Filled in by U-Boot */
- clock-frequency = <0>;
- };
-
- crypto@30000 {
- compatible = "fsl,sec3.3", "fsl,sec3.1", "fsl,sec3.0",
- "fsl,sec2.4", "fsl,sec2.2", "fsl,sec2.1",
- "fsl,sec2.0";
- reg = <0x30000 0x10000>;
- interrupts = <45 2 0 0 58 2 0 0>;
- fsl,num-channels = <4>;
- fsl,channel-fifo-len = <24>;
- fsl,exec-units-mask = <0x97c>;
- fsl,descriptor-types-mask = <0x3a30abf>;
- };
-
- sata@18000 {
- compatible = "fsl,p1022-sata", "fsl,pq-sata-v2";
- reg = <0x18000 0x1000>;
- cell-index = <1>;
- interrupts = <74 0x2 0 0>;
- };
-
- sata@19000 {
- compatible = "fsl,p1022-sata", "fsl,pq-sata-v2";
- reg = <0x19000 0x1000>;
- cell-index = <2>;
- interrupts = <41 0x2 0 0>;
- };
-
- power@e0070{
- compatible = "fsl,mpc8536-pmc", "fsl,mpc8548-pmc";
- reg = <0xe0070 0x20>;
- };
-
- display@10000 {
- compatible = "fsl,diu", "fsl,p1022-diu";
- reg = <0x10000 1000>;
- interrupts = <64 2 0 0>;
- };
-
- timer@41100 {
- compatible = "fsl,mpic-global-timer";
- reg = <0x41100 0x100 0x41300 4>;
- interrupts = <0 0 3 0
- 1 0 3 0
- 2 0 3 0
- 3 0 3 0>;
- };
-
- timer@42100 {
- compatible = "fsl,mpic-global-timer";
- reg = <0x42100 0x100 0x42300 4>;
- interrupts = <4 0 3 0
- 5 0 3 0
- 6 0 3 0
- 7 0 3 0>;
- };
-
- mpic: pic@40000 {
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <4>;
- reg = <0x40000 0x40000>;
- compatible = "fsl,mpic";
- device_type = "open-pic";
- };
-
- msi@41600 {
- compatible = "fsl,p1022-msi", "fsl,mpic-msi";
- reg = <0x41600 0x80>;
- msi-available-ranges = <0 0x100>;
- interrupts = <
- 0xe0 0 0 0
- 0xe1 0 0 0
- 0xe2 0 0 0
- 0xe3 0 0 0
- 0xe4 0 0 0
- 0xe5 0 0 0
- 0xe6 0 0 0
- 0xe7 0 0 0>;
- };
-
- global-utilities@e0000 { //global utilities block
- compatible = "fsl,p1022-guts";
- reg = <0xe0000 0x1000>;
- fsl,has-rstcr;
};
};
pci0: pcie@fffe09000 {
- compatible = "fsl,p1022-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
reg = <0xf 0xffe09000 0 0x1000>;
- bus-range = <0 255>;
ranges = <0x2000000 0x0 0xa0000000 0xc 0x20000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>;
- clock-frequency = <33333333>;
- interrupts = <16 2 0 0>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0 0 1 &mpic 4 1
- 0000 0 0 2 &mpic 5 1
- 0000 0 0 3 &mpic 6 1
- 0000 0 0 4 &mpic 7 1
- >;
pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
ranges = <0x2000000 0x0 0xe0000000
0x2000000 0x0 0xe0000000
0x0 0x20000000
@@ -585,30 +222,11 @@
};
pci1: pcie@fffe0a000 {
- compatible = "fsl,p1022-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
reg = <0xf 0xffe0a000 0 0x1000>;
- bus-range = <0 255>;
ranges = <0x2000000 0x0 0xc0000000 0xc 0x40000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0xf 0xffc20000 0x0 0x10000>;
- clock-frequency = <33333333>;
- interrupts = <16 2 0 0>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0 0 1 &mpic 0 1
- 0000 0 0 2 &mpic 1 1
- 0000 0 0 3 &mpic 2 1
- 0000 0 0 4 &mpic 3 1
- >;
pcie@0 {
reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
ranges = <0x2000000 0x0 0xe0000000
0x2000000 0x0 0xe0000000
0x0 0x20000000
@@ -619,32 +237,11 @@
};
};
-
pci2: pcie@fffe0b000 {
- compatible = "fsl,p1022-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
reg = <0xf 0xffe0b000 0 0x1000>;
- bus-range = <0 255>;
ranges = <0x2000000 0x0 0x80000000 0xc 0x00000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>;
- clock-frequency = <33333333>;
- interrupts = <16 2 0 0>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0 0 1 &mpic 8 1
- 0000 0 0 2 &mpic 9 1
- 0000 0 0 3 &mpic 10 1
- 0000 0 0 4 &mpic 11 1
- >;
pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
ranges = <0x2000000 0x0 0xe0000000
0x2000000 0x0 0xe0000000
0x0 0x20000000
@@ -655,3 +252,5 @@
};
};
};
+
+/include/ "fsl/p1022si-post.dtsi"
--
1.7.3.4
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH][v2] powerpc/85xx: Rework P2041RDB device tree
2011-11-17 14:32 [PATCH][v2] powerpc/85xx: Rework P1022DS device tree Kumar Gala
@ 2011-11-17 14:32 ` Kumar Gala
2011-11-17 16:04 ` [PATCH][v2] powerpc/85xx: Rework P1022DS " Tabi Timur-B04825
2011-12-06 22:44 ` Tabi Timur-B04825
2 siblings, 0 replies; 6+ messages in thread
From: Kumar Gala @ 2011-11-17 14:32 UTC (permalink / raw)
To: linuxppc-dev
Utilize new split between board & SoC, and new SoC device trees split
into pre & post utilizing 'template' includes for SoC IP blocks.
Other changes include:
* Adding of MPIC timer blocks
* Dropping "fsl,p2041-IP..." from compatibles for standard blocks
* Removed mpic interrupt-parent from dcsr-epu node, just use top level
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
v2: deleted p2041si.dtsi
arch/powerpc/boot/dts/fsl/p2041si-post.dtsi | 305 ++++++++++++
arch/powerpc/boot/dts/fsl/p2041si-pre.dtsi | 111 +++++
arch/powerpc/boot/dts/p2041rdb.dts | 11 +-
arch/powerpc/boot/dts/p2041si.dtsi | 692 ---------------------------
4 files changed, 425 insertions(+), 694 deletions(-)
create mode 100644 arch/powerpc/boot/dts/fsl/p2041si-post.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/p2041si-pre.dtsi
delete mode 100644 arch/powerpc/boot/dts/p2041si.dtsi
diff --git a/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi b/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi
new file mode 100644
index 0000000..8d037cf
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi
@@ -0,0 +1,305 @@
+/*
+ * P2041/P2040 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&lbc {
+ compatible = "fsl,p2041-elbc", "fsl,elbc", "simple-bus";
+ interrupts = <25 2 0 0>;
+ #address-cells = <2>;
+ #size-cells = <1>;
+};
+
+/* controller at 0x200000 */
+&pci0 {
+ compatible = "fsl,p2041-pcie", "fsl,qoriq-pcie-v2.2";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0x0 0xff>;
+ clock-frequency = <33333333>;
+ interrupts = <16 2 1 15>;
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <16 2 1 15>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0 0 1 &mpic 40 1 0 0
+ 0000 0 0 2 &mpic 1 1 0 0
+ 0000 0 0 3 &mpic 2 1 0 0
+ 0000 0 0 4 &mpic 3 1 0 0
+ >;
+ };
+};
+
+/* controller at 0x201000 */
+&pci1 {
+ compatible = "fsl,p2041-pcie", "fsl,qoriq-pcie-v2.2";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0 0xff>;
+ clock-frequency = <33333333>;
+ interrupts = <16 2 1 14>;
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <16 2 1 14>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0 0 1 &mpic 41 1 0 0
+ 0000 0 0 2 &mpic 5 1 0 0
+ 0000 0 0 3 &mpic 6 1 0 0
+ 0000 0 0 4 &mpic 7 1 0 0
+ >;
+ };
+};
+
+/* controller at 0x202000 */
+&pci2 {
+ compatible = "fsl,p2041-pcie", "fsl,qoriq-pcie-v2.2";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0x0 0xff>;
+ clock-frequency = <33333333>;
+ interrupts = <16 2 1 13>;
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <16 2 1 13>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0 0 1 &mpic 42 1 0 0
+ 0000 0 0 2 &mpic 9 1 0 0
+ 0000 0 0 3 &mpic 10 1 0 0
+ 0000 0 0 4 &mpic 11 1 0 0
+ >;
+ };
+};
+
+&dcsr {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,dcsr", "simple-bus";
+
+ dcsr-epu@0 {
+ compatible = "fsl,dcsr-epu";
+ interrupts = <52 2 0 0
+ 84 2 0 0
+ 85 2 0 0>;
+ reg = <0x0 0x1000>;
+ };
+ dcsr-npc {
+ compatible = "fsl,dcsr-npc";
+ reg = <0x1000 0x1000 0x1000000 0x8000>;
+ };
+ dcsr-nxc@2000 {
+ compatible = "fsl,dcsr-nxc";
+ reg = <0x2000 0x1000>;
+ };
+ dcsr-corenet {
+ compatible = "fsl,dcsr-corenet";
+ reg = <0x8000 0x1000 0xB0000 0x1000>;
+ };
+ dcsr-dpaa@9000 {
+ compatible = "fsl,p2041-dcsr-dpaa", "fsl,dcsr-dpaa";
+ reg = <0x9000 0x1000>;
+ };
+ dcsr-ocn@11000 {
+ compatible = "fsl,p2041-dcsr-ocn", "fsl,dcsr-ocn";
+ reg = <0x11000 0x1000>;
+ };
+ dcsr-ddr@12000 {
+ compatible = "fsl,dcsr-ddr";
+ dev-handle = <&ddr1>;
+ reg = <0x12000 0x1000>;
+ };
+ dcsr-nal@18000 {
+ compatible = "fsl,p2041-dcsr-nal", "fsl,dcsr-nal";
+ reg = <0x18000 0x1000>;
+ };
+ dcsr-rcpm@22000 {
+ compatible = "fsl,p2041-dcsr-rcpm", "fsl,dcsr-rcpm";
+ reg = <0x22000 0x1000>;
+ };
+ dcsr-cpu-sb-proxy@40000 {
+ compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+ cpu-handle = <&cpu0>;
+ reg = <0x40000 0x1000>;
+ };
+ dcsr-cpu-sb-proxy@41000 {
+ compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+ cpu-handle = <&cpu1>;
+ reg = <0x41000 0x1000>;
+ };
+ dcsr-cpu-sb-proxy@42000 {
+ compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+ cpu-handle = <&cpu2>;
+ reg = <0x42000 0x1000>;
+ };
+ dcsr-cpu-sb-proxy@43000 {
+ compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+ cpu-handle = <&cpu3>;
+ reg = <0x43000 0x1000>;
+ };
+};
+
+&soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "soc";
+ compatible = "simple-bus";
+
+ soc-sram-error {
+ compatible = "fsl,soc-sram-error";
+ interrupts = <16 2 1 29>;
+ };
+
+ corenet-law@0 {
+ compatible = "fsl,corenet-law";
+ reg = <0x0 0x1000>;
+ fsl,num-laws = <32>;
+ };
+
+ ddr1: memory-controller@8000 {
+ compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller";
+ reg = <0x8000 0x1000>;
+ interrupts = <16 2 1 23>;
+ };
+
+ cpc: l3-cache-controller@10000 {
+ compatible = "fsl,p2041-l3-cache-controller", "fsl,p4080-l3-cache-controller", "cache";
+ reg = <0x10000 0x1000>;
+ interrupts = <16 2 1 27>;
+ };
+
+ corenet-cf@18000 {
+ compatible = "fsl,corenet-cf";
+ reg = <0x18000 0x1000>;
+ interrupts = <16 2 1 31>;
+ fsl,ccf-num-csdids = <32>;
+ fsl,ccf-num-snoopids = <32>;
+ };
+
+ iommu@20000 {
+ compatible = "fsl,pamu-v1.0", "fsl,pamu";
+ reg = <0x20000 0x4000>;
+ interrupts = <
+ 24 2 0 0
+ 16 2 1 30>;
+ };
+
+/include/ "qoriq-mpic.dtsi"
+
+ guts: global-utilities@e0000 {
+ compatible = "fsl,qoriq-device-config-1.0";
+ reg = <0xe0000 0xe00>;
+ fsl,has-rstcr;
+ #sleep-cells = <1>;
+ fsl,liodn-bits = <12>;
+ };
+
+ pins: global-utilities@e0e00 {
+ compatible = "fsl,qoriq-pin-control-1.0";
+ reg = <0xe0e00 0x200>;
+ #sleep-cells = <2>;
+ };
+
+ clockgen: global-utilities@e1000 {
+ compatible = "fsl,p2041-clockgen", "fsl,qoriq-clockgen-1.0";
+ reg = <0xe1000 0x1000>;
+ clock-frequency = <0>;
+ };
+
+ rcpm: global-utilities@e2000 {
+ compatible = "fsl,qoriq-rcpm-1.0";
+ reg = <0xe2000 0x1000>;
+ #sleep-cells = <1>;
+ };
+
+ sfp: sfp@e8000 {
+ compatible = "fsl,p2041-sfp", "fsl,qoriq-sfp-1.0";
+ reg = <0xe8000 0x1000>;
+ };
+
+ serdes: serdes@ea000 {
+ compatible = "fsl,p2041-serdes";
+ reg = <0xea000 0x1000>;
+ };
+
+/include/ "qoriq-dma-0.dtsi"
+/include/ "qoriq-dma-1.dtsi"
+/include/ "qoriq-espi-0.dtsi"
+ spi@110000 {
+ fsl,espi-num-chipselects = <4>;
+ };
+
+/include/ "qoriq-esdhc-0.dtsi"
+ sdhc@114000 {
+ sdhci,auto-cmd12;
+ };
+
+/include/ "qoriq-i2c-0.dtsi"
+/include/ "qoriq-i2c-1.dtsi"
+/include/ "qoriq-duart-0.dtsi"
+/include/ "qoriq-duart-1.dtsi"
+/include/ "qoriq-gpio-0.dtsi"
+/include/ "qoriq-usb2-mph-0.dtsi"
+ usb0: usb@210000 {
+ phy_type = "utmi";
+ port0;
+ };
+
+/include/ "qoriq-usb2-dr-0.dtsi"
+ usb1: usb@211000 {
+ dr_mode = "host";
+ phy_type = "utmi";
+ };
+
+/include/ "qoriq-sata2-0.dtsi"
+/include/ "qoriq-sata2-1.dtsi"
+/include/ "qoriq-sec4.2-0.dtsi"
+};
diff --git a/arch/powerpc/boot/dts/fsl/p2041si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p2041si-pre.dtsi
new file mode 100644
index 0000000..2d0a40d
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p2041si-pre.dtsi
@@ -0,0 +1,111 @@
+/*
+ * P2041 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+/ {
+ compatible = "fsl,P2041";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-parent = <&mpic>;
+
+ aliases {
+ ccsr = &soc;
+ dcsr = &dcsr;
+
+ serial0 = &serial0;
+ serial1 = &serial1;
+ serial2 = &serial2;
+ serial3 = &serial3;
+ pci0 = &pci0;
+ pci1 = &pci1;
+ pci2 = &pci2;
+ usb0 = &usb0;
+ usb1 = &usb1;
+ dma0 = &dma0;
+ dma1 = &dma1;
+ sdhc = &sdhc;
+ msi0 = &msi0;
+ msi1 = &msi1;
+ msi2 = &msi2;
+
+ crypto = &crypto;
+ sec_jr0 = &sec_jr0;
+ sec_jr1 = &sec_jr1;
+ sec_jr2 = &sec_jr2;
+ sec_jr3 = &sec_jr3;
+ rtic_a = &rtic_a;
+ rtic_b = &rtic_b;
+ rtic_c = &rtic_c;
+ rtic_d = &rtic_d;
+ sec_mon = &sec_mon;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: PowerPC,e500mc@0 {
+ device_type = "cpu";
+ reg = <0>;
+ next-level-cache = <&L2_0>;
+ L2_0: l2-cache {
+ next-level-cache = <&cpc>;
+ };
+ };
+ cpu1: PowerPC,e500mc@1 {
+ device_type = "cpu";
+ reg = <1>;
+ next-level-cache = <&L2_1>;
+ L2_1: l2-cache {
+ next-level-cache = <&cpc>;
+ };
+ };
+ cpu2: PowerPC,e500mc@2 {
+ device_type = "cpu";
+ reg = <2>;
+ next-level-cache = <&L2_2>;
+ L2_2: l2-cache {
+ next-level-cache = <&cpc>;
+ };
+ };
+ cpu3: PowerPC,e500mc@3 {
+ device_type = "cpu";
+ reg = <3>;
+ next-level-cache = <&L2_3>;
+ L2_3: l2-cache {
+ next-level-cache = <&cpc>;
+ };
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/p2041rdb.dts b/arch/powerpc/boot/dts/p2041rdb.dts
index 79b6895..d6ea24d 100644
--- a/arch/powerpc/boot/dts/p2041rdb.dts
+++ b/arch/powerpc/boot/dts/p2041rdb.dts
@@ -32,7 +32,7 @@
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
-/include/ "p2041si.dtsi"
+/include/ "fsl/p2041si-pre.dtsi"
/ {
model = "fsl,P2041RDB";
@@ -50,6 +50,8 @@
};
soc: soc@ffe000000 {
+ ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
+ reg = <0xf 0xfe000000 0 0x00001000>;
spi@110000 {
flash@0 {
#address-cells = <1>;
@@ -106,7 +108,7 @@
};
};
- localbus@ffe124000 {
+ lbc: localbus@ffe124000 {
reg = <0xf 0xfe124000 0 0x1000>;
ranges = <0 0 0xf 0xe8000000 0x08000000>;
@@ -122,6 +124,7 @@
reg = <0xf 0xfe200000 0 0x1000>;
ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
+ fsl,msi = <&msi0>;
pcie@0 {
ranges = <0x02000000 0 0xe0000000
0x02000000 0 0xe0000000
@@ -137,6 +140,7 @@
reg = <0xf 0xfe201000 0 0x1000>;
ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>;
+ fsl,msi = <&msi1>;
pcie@0 {
ranges = <0x02000000 0 0xe0000000
0x02000000 0 0xe0000000
@@ -152,6 +156,7 @@
reg = <0xf 0xfe202000 0 0x1000>;
ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x20000000
0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
+ fsl,msi = <&msi2>;
pcie@0 {
ranges = <0x02000000 0 0xe0000000
0x02000000 0 0xe0000000
@@ -163,3 +168,5 @@
};
};
};
+
+/include/ "fsl/p2041si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/p2041si.dtsi b/arch/powerpc/boot/dts/p2041si.dtsi
deleted file mode 100644
index f7492ed..0000000
--- a/arch/powerpc/boot/dts/p2041si.dtsi
+++ /dev/null
@@ -1,692 +0,0 @@
-/*
- * P2041 Silicon Device Tree Source
- *
- * Copyright 2011 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * * Neither the name of Freescale Semiconductor nor the
- * names of its contributors may be used to endorse or promote products
- * derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/dts-v1/;
-
-/ {
- compatible = "fsl,P2041";
- #address-cells = <2>;
- #size-cells = <2>;
- interrupt-parent = <&mpic>;
-
- aliases {
- ccsr = &soc;
- dcsr = &dcsr;
-
- serial0 = &serial0;
- serial1 = &serial1;
- serial2 = &serial2;
- serial3 = &serial3;
- pci0 = &pci0;
- pci1 = &pci1;
- pci2 = &pci2;
- usb0 = &usb0;
- usb1 = &usb1;
- dma0 = &dma0;
- dma1 = &dma1;
- sdhc = &sdhc;
- msi0 = &msi0;
- msi1 = &msi1;
- msi2 = &msi2;
-
- crypto = &crypto;
- sec_jr0 = &sec_jr0;
- sec_jr1 = &sec_jr1;
- sec_jr2 = &sec_jr2;
- sec_jr3 = &sec_jr3;
- rtic_a = &rtic_a;
- rtic_b = &rtic_b;
- rtic_c = &rtic_c;
- rtic_d = &rtic_d;
- sec_mon = &sec_mon;
- };
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- cpu0: PowerPC,e500mc@0 {
- device_type = "cpu";
- reg = <0>;
- next-level-cache = <&L2_0>;
- L2_0: l2-cache {
- next-level-cache = <&cpc>;
- };
- };
- cpu1: PowerPC,e500mc@1 {
- device_type = "cpu";
- reg = <1>;
- next-level-cache = <&L2_1>;
- L2_1: l2-cache {
- next-level-cache = <&cpc>;
- };
- };
- cpu2: PowerPC,e500mc@2 {
- device_type = "cpu";
- reg = <2>;
- next-level-cache = <&L2_2>;
- L2_2: l2-cache {
- next-level-cache = <&cpc>;
- };
- };
- cpu3: PowerPC,e500mc@3 {
- device_type = "cpu";
- reg = <3>;
- next-level-cache = <&L2_3>;
- L2_3: l2-cache {
- next-level-cache = <&cpc>;
- };
- };
- };
-
- dcsr: dcsr@f00000000 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,dcsr", "simple-bus";
-
- dcsr-epu@0 {
- compatible = "fsl,dcsr-epu";
- interrupts = <52 2 0 0
- 84 2 0 0
- 85 2 0 0>;
- interrupt-parent = <&mpic>;
- reg = <0x0 0x1000>;
- };
- dcsr-npc {
- compatible = "fsl,dcsr-npc";
- reg = <0x1000 0x1000 0x1000000 0x8000>;
- };
- dcsr-nxc@2000 {
- compatible = "fsl,dcsr-nxc";
- reg = <0x2000 0x1000>;
- };
- dcsr-corenet {
- compatible = "fsl,dcsr-corenet";
- reg = <0x8000 0x1000 0xB0000 0x1000>;
- };
- dcsr-dpaa@9000 {
- compatible = "fsl,p2041-dcsr-dpaa", "fsl,dcsr-dpaa";
- reg = <0x9000 0x1000>;
- };
- dcsr-ocn@11000 {
- compatible = "fsl,p2041-dcsr-ocn", "fsl,dcsr-ocn";
- reg = <0x11000 0x1000>;
- };
- dcsr-ddr@12000 {
- compatible = "fsl,dcsr-ddr";
- dev-handle = <&ddr>;
- reg = <0x12000 0x1000>;
- };
- dcsr-nal@18000 {
- compatible = "fsl,p2041-dcsr-nal", "fsl,dcsr-nal";
- reg = <0x18000 0x1000>;
- };
- dcsr-rcpm@22000 {
- compatible = "fsl,p2041-dcsr-rcpm", "fsl,dcsr-rcpm";
- reg = <0x22000 0x1000>;
- };
- dcsr-cpu-sb-proxy@40000 {
- compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
- cpu-handle = <&cpu0>;
- reg = <0x40000 0x1000>;
- };
- dcsr-cpu-sb-proxy@41000 {
- compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
- cpu-handle = <&cpu1>;
- reg = <0x41000 0x1000>;
- };
- dcsr-cpu-sb-proxy@42000 {
- compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
- cpu-handle = <&cpu2>;
- reg = <0x42000 0x1000>;
- };
- dcsr-cpu-sb-proxy@43000 {
- compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
- cpu-handle = <&cpu3>;
- reg = <0x43000 0x1000>;
- };
- };
-
- soc: soc@ffe000000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "soc";
- compatible = "simple-bus";
- ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
- reg = <0xf 0xfe000000 0 0x00001000>;
-
- soc-sram-error {
- compatible = "fsl,soc-sram-error";
- interrupts = <16 2 1 29>;
- };
-
- corenet-law@0 {
- compatible = "fsl,corenet-law";
- reg = <0x0 0x1000>;
- fsl,num-laws = <32>;
- };
-
- ddr: memory-controller@8000 {
- compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller";
- reg = <0x8000 0x1000>;
- interrupts = <16 2 1 23>;
- };
-
- cpc: l3-cache-controller@10000 {
- compatible = "fsl,p2041-l3-cache-controller", "fsl,p4080-l3-cache-controller", "cache";
- reg = <0x10000 0x1000>;
- interrupts = <16 2 1 27>;
- };
-
- corenet-cf@18000 {
- compatible = "fsl,corenet-cf";
- reg = <0x18000 0x1000>;
- interrupts = <16 2 1 31>;
- fsl,ccf-num-csdids = <32>;
- fsl,ccf-num-snoopids = <32>;
- };
-
- iommu@20000 {
- compatible = "fsl,pamu-v1.0", "fsl,pamu";
- reg = <0x20000 0x4000>;
- interrupts = <
- 24 2 0 0
- 16 2 1 30>;
- };
-
- mpic: pic@40000 {
- clock-frequency = <0>;
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <4>;
- reg = <0x40000 0x40000>;
- compatible = "fsl,mpic", "chrp,open-pic";
- device_type = "open-pic";
- };
-
- msi0: msi@41600 {
- compatible = "fsl,mpic-msi";
- reg = <0x41600 0x200>;
- msi-available-ranges = <0 0x100>;
- interrupts = <
- 0xe0 0 0 0
- 0xe1 0 0 0
- 0xe2 0 0 0
- 0xe3 0 0 0
- 0xe4 0 0 0
- 0xe5 0 0 0
- 0xe6 0 0 0
- 0xe7 0 0 0>;
- };
-
- msi1: msi@41800 {
- compatible = "fsl,mpic-msi";
- reg = <0x41800 0x200>;
- msi-available-ranges = <0 0x100>;
- interrupts = <
- 0xe8 0 0 0
- 0xe9 0 0 0
- 0xea 0 0 0
- 0xeb 0 0 0
- 0xec 0 0 0
- 0xed 0 0 0
- 0xee 0 0 0
- 0xef 0 0 0>;
- };
-
- msi2: msi@41a00 {
- compatible = "fsl,mpic-msi";
- reg = <0x41a00 0x200>;
- msi-available-ranges = <0 0x100>;
- interrupts = <
- 0xf0 0 0 0
- 0xf1 0 0 0
- 0xf2 0 0 0
- 0xf3 0 0 0
- 0xf4 0 0 0
- 0xf5 0 0 0
- 0xf6 0 0 0
- 0xf7 0 0 0>;
- };
-
- guts: global-utilities@e0000 {
- compatible = "fsl,qoriq-device-config-1.0";
- reg = <0xe0000 0xe00>;
- fsl,has-rstcr;
- #sleep-cells = <1>;
- fsl,liodn-bits = <12>;
- };
-
- pins: global-utilities@e0e00 {
- compatible = "fsl,qoriq-pin-control-1.0";
- reg = <0xe0e00 0x200>;
- #sleep-cells = <2>;
- };
-
- clockgen: global-utilities@e1000 {
- compatible = "fsl,p2041-clockgen", "fsl,qoriq-clockgen-1.0";
- reg = <0xe1000 0x1000>;
- clock-frequency = <0>;
- };
-
- rcpm: global-utilities@e2000 {
- compatible = "fsl,qoriq-rcpm-1.0";
- reg = <0xe2000 0x1000>;
- #sleep-cells = <1>;
- };
-
- sfp: sfp@e8000 {
- compatible = "fsl,p2041-sfp", "fsl,qoriq-sfp-1.0";
- reg = <0xe8000 0x1000>;
- };
-
- serdes: serdes@ea000 {
- compatible = "fsl,p2041-serdes";
- reg = <0xea000 0x1000>;
- };
-
- dma0: dma@100300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,p2041-dma", "fsl,eloplus-dma";
- reg = <0x100300 0x4>;
- ranges = <0x0 0x100100 0x200>;
- cell-index = <0>;
- dma-channel@0 {
- compatible = "fsl,p2041-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupts = <28 2 0 0>;
- };
- dma-channel@80 {
- compatible = "fsl,p2041-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupts = <29 2 0 0>;
- };
- dma-channel@100 {
- compatible = "fsl,p2041-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupts = <30 2 0 0>;
- };
- dma-channel@180 {
- compatible = "fsl,p2041-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupts = <31 2 0 0>;
- };
- };
-
- dma1: dma@101300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,p2041-dma", "fsl,eloplus-dma";
- reg = <0x101300 0x4>;
- ranges = <0x0 0x101100 0x200>;
- cell-index = <1>;
- dma-channel@0 {
- compatible = "fsl,p2041-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupts = <32 2 0 0>;
- };
- dma-channel@80 {
- compatible = "fsl,p2041-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupts = <33 2 0 0>;
- };
- dma-channel@100 {
- compatible = "fsl,p2041-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupts = <34 2 0 0>;
- };
- dma-channel@180 {
- compatible = "fsl,p2041-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupts = <35 2 0 0>;
- };
- };
-
- spi@110000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,p2041-espi", "fsl,mpc8536-espi";
- reg = <0x110000 0x1000>;
- interrupts = <53 0x2 0 0>;
- fsl,espi-num-chipselects = <4>;
- };
-
- sdhc: sdhc@114000 {
- compatible = "fsl,p2041-esdhc", "fsl,esdhc";
- reg = <0x114000 0x1000>;
- interrupts = <48 2 0 0>;
- sdhci,auto-cmd12;
- clock-frequency = <0>;
- };
-
- i2c@118000 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <0>;
- compatible = "fsl-i2c";
- reg = <0x118000 0x100>;
- interrupts = <38 2 0 0>;
- dfsrr;
- };
-
- i2c@118100 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <1>;
- compatible = "fsl-i2c";
- reg = <0x118100 0x100>;
- interrupts = <38 2 0 0>;
- dfsrr;
- };
-
- i2c@119000 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <2>;
- compatible = "fsl-i2c";
- reg = <0x119000 0x100>;
- interrupts = <39 2 0 0>;
- dfsrr;
- };
-
- i2c@119100 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <3>;
- compatible = "fsl-i2c";
- reg = <0x119100 0x100>;
- interrupts = <39 2 0 0>;
- dfsrr;
- };
-
- serial0: serial@11c500 {
- cell-index = <0>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x11c500 0x100>;
- clock-frequency = <0>;
- interrupts = <36 2 0 0>;
- };
-
- serial1: serial@11c600 {
- cell-index = <1>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x11c600 0x100>;
- clock-frequency = <0>;
- interrupts = <36 2 0 0>;
- };
-
- serial2: serial@11d500 {
- cell-index = <2>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x11d500 0x100>;
- clock-frequency = <0>;
- interrupts = <37 2 0 0>;
- };
-
- serial3: serial@11d600 {
- cell-index = <3>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x11d600 0x100>;
- clock-frequency = <0>;
- interrupts = <37 2 0 0>;
- };
-
- gpio0: gpio@130000 {
- compatible = "fsl,p2041-gpio", "fsl,qoriq-gpio";
- reg = <0x130000 0x1000>;
- interrupts = <55 2 0 0>;
- #gpio-cells = <2>;
- gpio-controller;
- };
-
- usb0: usb@210000 {
- compatible = "fsl,p2041-usb2-mph",
- "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph";
- reg = <0x210000 0x1000>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <44 0x2 0 0>;
- phy_type = "utmi";
- port0;
- };
-
- usb1: usb@211000 {
- compatible = "fsl,p2041-usb2-dr",
- "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr";
- reg = <0x211000 0x1000>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <45 0x2 0 0>;
- phy_type = "utmi";
- };
-
- sata@220000 {
- compatible = "fsl,p2041-sata", "fsl,pq-sata-v2";
- reg = <0x220000 0x1000>;
- interrupts = <68 0x2 0 0>;
- };
-
- sata@221000 {
- compatible = "fsl,p2041-sata", "fsl,pq-sata-v2";
- reg = <0x221000 0x1000>;
- interrupts = <69 0x2 0 0>;
- };
-
- crypto: crypto@300000 {
- compatible = "fsl,sec-v4.2", "fsl,sec-v4.0";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0x300000 0x10000>;
- ranges = <0 0x300000 0x10000>;
- interrupts = <92 2 0 0>;
-
- sec_jr0: jr@1000 {
- compatible = "fsl,sec-v4.2-job-ring",
- "fsl,sec-v4.0-job-ring";
- reg = <0x1000 0x1000>;
- interrupts = <88 2 0 0>;
- };
-
- sec_jr1: jr@2000 {
- compatible = "fsl,sec-v4.2-job-ring",
- "fsl,sec-v4.0-job-ring";
- reg = <0x2000 0x1000>;
- interrupts = <89 2 0 0>;
- };
-
- sec_jr2: jr@3000 {
- compatible = "fsl,sec-v4.2-job-ring",
- "fsl,sec-v4.0-job-ring";
- reg = <0x3000 0x1000>;
- interrupts = <90 2 0 0>;
- };
-
- sec_jr3: jr@4000 {
- compatible = "fsl,sec-v4.2-job-ring",
- "fsl,sec-v4.0-job-ring";
- reg = <0x4000 0x1000>;
- interrupts = <91 2 0 0>;
- };
-
- rtic@6000 {
- compatible = "fsl,sec-v4.2-rtic",
- "fsl,sec-v4.0-rtic";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0x6000 0x100>;
- ranges = <0x0 0x6100 0xe00>;
-
- rtic_a: rtic-a@0 {
- compatible = "fsl,sec-v4.2-rtic-memory",
- "fsl,sec-v4.0-rtic-memory";
- reg = <0x00 0x20 0x100 0x80>;
- };
-
- rtic_b: rtic-b@20 {
- compatible = "fsl,sec-v4.2-rtic-memory",
- "fsl,sec-v4.0-rtic-memory";
- reg = <0x20 0x20 0x200 0x80>;
- };
-
- rtic_c: rtic-c@40 {
- compatible = "fsl,sec-v4.2-rtic-memory",
- "fsl,sec-v4.0-rtic-memory";
- reg = <0x40 0x20 0x300 0x80>;
- };
-
- rtic_d: rtic-d@60 {
- compatible = "fsl,sec-v4.2-rtic-memory",
- "fsl,sec-v4.0-rtic-memory";
- reg = <0x60 0x20 0x500 0x80>;
- };
- };
- };
-
- sec_mon: sec_mon@314000 {
- compatible = "fsl,sec-v4.2-mon", "fsl,sec-v4.0-mon";
- reg = <0x314000 0x1000>;
- interrupts = <93 2 0 0>;
- };
-
- };
-
- localbus@ffe124000 {
- compatible = "fsl,p2041-elbc", "fsl,elbc", "simple-bus";
- interrupts = <25 2 0 0>;
- #address-cells = <2>;
- #size-cells = <1>;
- };
-
- pci0: pcie@ffe200000 {
- compatible = "fsl,p2041-pcie", "fsl,qoriq-pcie-v2.2";
- device_type = "pci";
- #size-cells = <2>;
- #address-cells = <3>;
- bus-range = <0x0 0xff>;
- clock-frequency = <33333333>;
- fsl,msi = <&msi0>;
- interrupts = <16 2 1 15>;
- pcie@0 {
- reg = <0 0 0 0 0>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- interrupts = <16 2 1 15>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0 0 1 &mpic 40 1 0 0
- 0000 0 0 2 &mpic 1 1 0 0
- 0000 0 0 3 &mpic 2 1 0 0
- 0000 0 0 4 &mpic 3 1 0 0
- >;
- };
- };
-
- pci1: pcie@ffe201000 {
- compatible = "fsl,p2041-pcie", "fsl,qoriq-pcie-v2.2";
- device_type = "pci";
- #size-cells = <2>;
- #address-cells = <3>;
- bus-range = <0 0xff>;
- clock-frequency = <33333333>;
- fsl,msi = <&msi1>;
- interrupts = <16 2 1 14>;
- pcie@0 {
- reg = <0 0 0 0 0>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- interrupts = <16 2 1 14>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0 0 1 &mpic 41 1 0 0
- 0000 0 0 2 &mpic 5 1 0 0
- 0000 0 0 3 &mpic 6 1 0 0
- 0000 0 0 4 &mpic 7 1 0 0
- >;
- };
- };
-
- pci2: pcie@ffe202000 {
- compatible = "fsl,p2041-pcie", "fsl,qoriq-pcie-v2.2";
- device_type = "pci";
- #size-cells = <2>;
- #address-cells = <3>;
- bus-range = <0x0 0xff>;
- clock-frequency = <33333333>;
- fsl,msi = <&msi2>;
- interrupts = <16 2 1 13>;
- pcie@0 {
- reg = <0 0 0 0 0>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- interrupts = <16 2 1 13>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0 0 1 &mpic 42 1 0 0
- 0000 0 0 2 &mpic 9 1 0 0
- 0000 0 0 3 &mpic 10 1 0 0
- 0000 0 0 4 &mpic 11 1 0 0
- >;
- };
- };
-};
--
1.7.3.4
^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH][v2] powerpc/85xx: Rework P1022DS device tree
2011-11-17 14:32 [PATCH][v2] powerpc/85xx: Rework P1022DS device tree Kumar Gala
2011-11-17 14:32 ` [PATCH][v2] powerpc/85xx: Rework P2041RDB " Kumar Gala
@ 2011-11-17 16:04 ` Tabi Timur-B04825
2011-11-17 16:55 ` Kumar Gala
2011-12-06 22:44 ` Tabi Timur-B04825
2 siblings, 1 reply; 6+ messages in thread
From: Tabi Timur-B04825 @ 2011-11-17 16:04 UTC (permalink / raw)
To: Kumar Gala; +Cc: linuxppc-dev
On Thu, Nov 17, 2011 at 8:32 AM, Kumar Gala <galak@kernel.crashing.org> wro=
te:
> Utilize new split between board & SoC, and new SoC device trees split
> into pre & post utilizing 'template' includes for SoC IP blocks.
>
> Other changes include:
>
> * Reworked PCIe nodes to allow supportin IRQs for controller (errors)
> =A0and moved PCI device IRQs down to virtual bridge level
> * Changed GPIO compatiable from 'fsl,mpc8572-gpio' to 'fsl,pq3-gpio' as t=
he
> =A0'mpc8572' compatiable is to deal with a 'mpc8572' specific to an errat=
um
> * Updated spi node to new espi binding specification
> * Renamed SDHC node from 'sdhci' to 'sdhc'
> * Added usb node for 2nd usb controller
> * Dropping "fsl,p1022-IP..." from compatibles for standard blocks
> * Fixed bug in local bus range node for CS2, was maping to
> =A00x0 0x0xffa00000 instead of 0xf 0xffa00000
> * Fixed localbus reg property should have been 0xf 0xffe05000
>
> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
> ---
> v2: fixed localbus reg property
Acked-by: Timur Tabi <timur@freescale.com>
--=20
Timur Tabi
Linux kernel developer at Freescale=
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH][v2] powerpc/85xx: Rework P1022DS device tree
2011-11-17 16:04 ` [PATCH][v2] powerpc/85xx: Rework P1022DS " Tabi Timur-B04825
@ 2011-11-17 16:55 ` Kumar Gala
2011-11-17 16:58 ` Timur Tabi
0 siblings, 1 reply; 6+ messages in thread
From: Kumar Gala @ 2011-11-17 16:55 UTC (permalink / raw)
To: Tabi Timur-B04825; +Cc: linuxppc-dev
On Nov 17, 2011, at 10:04 AM, Tabi Timur-B04825 wrote:
> On Thu, Nov 17, 2011 at 8:32 AM, Kumar Gala =
<galak@kernel.crashing.org> wrote:
>> Utilize new split between board & SoC, and new SoC device trees split
>> into pre & post utilizing 'template' includes for SoC IP blocks.
>>=20
>> Other changes include:
>>=20
>> * Reworked PCIe nodes to allow supportin IRQs for controller (errors)
>> and moved PCI device IRQs down to virtual bridge level
>> * Changed GPIO compatiable from 'fsl,mpc8572-gpio' to 'fsl,pq3-gpio' =
as the
>> 'mpc8572' compatiable is to deal with a 'mpc8572' specific to an =
erratum
>> * Updated spi node to new espi binding specification
>> * Renamed SDHC node from 'sdhci' to 'sdhc'
>> * Added usb node for 2nd usb controller
>> * Dropping "fsl,p1022-IP..." from compatibles for standard blocks
>> * Fixed bug in local bus range node for CS2, was maping to
>> 0x0 0x0xffa00000 instead of 0xf 0xffa00000
>> * Fixed localbus reg property should have been 0xf 0xffe05000
>>=20
>> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
>> ---
>> v2: fixed localbus reg property
>=20
> Acked-by: Timur Tabi <timur@freescale.com>
How about a Tested-by:
:)
- k
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH][v2] powerpc/85xx: Rework P1022DS device tree
2011-11-17 16:55 ` Kumar Gala
@ 2011-11-17 16:58 ` Timur Tabi
0 siblings, 0 replies; 6+ messages in thread
From: Timur Tabi @ 2011-11-17 16:58 UTC (permalink / raw)
To: Kumar Gala; +Cc: linuxppc-dev
Kumar Gala wrote:
>> > Acked-by: Timur Tabi <timur@freescale.com>
> How about a Tested-by:
I did test it.
Tested-by: Timur Tabi <timur@freescale.com>
--
Timur Tabi
Linux kernel developer at Freescale
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH][v2] powerpc/85xx: Rework P1022DS device tree
2011-11-17 14:32 [PATCH][v2] powerpc/85xx: Rework P1022DS device tree Kumar Gala
2011-11-17 14:32 ` [PATCH][v2] powerpc/85xx: Rework P2041RDB " Kumar Gala
2011-11-17 16:04 ` [PATCH][v2] powerpc/85xx: Rework P1022DS " Tabi Timur-B04825
@ 2011-12-06 22:44 ` Tabi Timur-B04825
2 siblings, 0 replies; 6+ messages in thread
From: Tabi Timur-B04825 @ 2011-12-06 22:44 UTC (permalink / raw)
To: Kumar Gala; +Cc: linuxppc-dev
On Thu, Nov 17, 2011 at 8:32 AM, Kumar Gala <galak@kernel.crashing.org> wro=
te:=0A=
>=0A=
> @@ -585,30 +222,11 @@=0A=
> =A0 =A0 =A0 =A0};=0A=
>=0A=
> =A0 =A0 =A0 =A0pci1: pcie@fffe0a000 {=0A=
> - =A0 =A0 =A0 =A0 =A0 =A0 =A0 compatible =3D "fsl,p1022-pcie";=0A=
> - =A0 =A0 =A0 =A0 =A0 =A0 =A0 device_type =3D "pci";=0A=
> - =A0 =A0 =A0 =A0 =A0 =A0 =A0 #interrupt-cells =3D <1>;=0A=
> - =A0 =A0 =A0 =A0 =A0 =A0 =A0 #size-cells =3D <2>;=0A=
> - =A0 =A0 =A0 =A0 =A0 =A0 =A0 #address-cells =3D <3>;=0A=
> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0reg =3D <0xf 0xffe0a000 0 0x1000>;=0A=
> - =A0 =A0 =A0 =A0 =A0 =A0 =A0 bus-range =3D <0 255>;=0A=
> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0ranges =3D <0x2000000 0x0 0xc0000000 0xc 0=
x40000000 0x0 0x20000000=0A=
> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A00x1000000 0x0 0x000000=
00 0xf 0xffc20000 0x0 0x10000>;=0A=
> - =A0 =A0 =A0 =A0 =A0 =A0 =A0 clock-frequency =3D <33333333>;=0A=
> - =A0 =A0 =A0 =A0 =A0 =A0 =A0 interrupts =3D <16 2 0 0>;=0A=
> - =A0 =A0 =A0 =A0 =A0 =A0 =A0 interrupt-map-mask =3D <0xf800 0 0 7>;=0A=
> - =A0 =A0 =A0 =A0 =A0 =A0 =A0 interrupt-map =3D <=0A=
> - =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 /* IDSEL 0x0 */=0A=
> - =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 0000 0 0 1 &mpic 0 1=0A=
> - =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 0000 0 0 2 &mpic 1 1=0A=
> - =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 0000 0 0 3 &mpic 2 1=0A=
> - =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 0000 0 0 4 &mpic 3 1=0A=
> - =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 >;=0A=
> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0pcie@0 {=0A=
> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0reg =3D <0x0 0x0 0x0 0x0 0=
x0>;=0A=
=0A=
Did you forget to delete this 'reg' line?=0A=
=0A=
> - =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 #size-cells =3D <2>;=0A=
> - =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 #address-cells =3D <3>;=0A=
> - =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 device_type =3D "pci";=0A=
> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0ranges =3D <0x2000000 0x0 =
0xe0000000=0A=
> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A00x2000=
000 0x0 0xe0000000=0A=
> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A00x0 0x=
20000000=0A=
=0A=
-- =0A=
Timur Tabi=0A=
Linux kernel developer at Freescale=0A=
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2011-12-06 22:44 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2011-11-17 14:32 [PATCH][v2] powerpc/85xx: Rework P1022DS device tree Kumar Gala
2011-11-17 14:32 ` [PATCH][v2] powerpc/85xx: Rework P2041RDB " Kumar Gala
2011-11-17 16:04 ` [PATCH][v2] powerpc/85xx: Rework P1022DS " Tabi Timur-B04825
2011-11-17 16:55 ` Kumar Gala
2011-11-17 16:58 ` Timur Tabi
2011-12-06 22:44 ` Tabi Timur-B04825
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).