* [PATCH 1/4] powerpc/mpc5121: add common .dtsi and use it in mpc5121ads.dts
@ 2013-01-14 20:34 Anatolij Gustschin
2013-01-14 20:34 ` [PATCH 2/4] powerpc/mpc5121: pdm360ng.dts: use common mpc5121.dtsi Anatolij Gustschin
` (2 more replies)
0 siblings, 3 replies; 4+ messages in thread
From: Anatolij Gustschin @ 2013-01-14 20:34 UTC (permalink / raw)
To: linuxppc-dev
Provide common mpc5121.dtsi file for mpc5121 SoC and modify
mpc5121ads.dts to use mpc5121.dtsi.
Signed-off-by: Anatolij Gustschin <agust@denx.de>
---
arch/powerpc/boot/dts/mpc5121.dtsi | 410 ++++++++++++++++++++++++++++++++++
arch/powerpc/boot/dts/mpc5121ads.dts | 319 ++++-----------------------
2 files changed, 449 insertions(+), 280 deletions(-)
create mode 100644 arch/powerpc/boot/dts/mpc5121.dtsi
diff --git a/arch/powerpc/boot/dts/mpc5121.dtsi b/arch/powerpc/boot/dts/mpc5121.dtsi
new file mode 100644
index 0000000..723e292
--- /dev/null
+++ b/arch/powerpc/boot/dts/mpc5121.dtsi
@@ -0,0 +1,410 @@
+/*
+ * base MPC5121 Device Tree Source
+ *
+ * Copyright 2007-2008 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+ model = "mpc5121";
+ compatible = "fsl,mpc5121";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ interrupt-parent = <&ipic>;
+
+ aliases {
+ ethernet0 = ð0;
+ pci = &pci;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,5121@0 {
+ device_type = "cpu";
+ reg = <0>;
+ d-cache-line-size = <0x20>; /* 32 bytes */
+ i-cache-line-size = <0x20>; /* 32 bytes */
+ d-cache-size = <0x8000>; /* L1, 32K */
+ i-cache-size = <0x8000>; /* L1, 32K */
+ timebase-frequency = <49500000>;/* 49.5 MHz (csb/4) */
+ bus-frequency = <198000000>; /* 198 MHz csb bus */
+ clock-frequency = <396000000>; /* 396 MHz ppc core */
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x10000000>; /* 256MB at 0 */
+ };
+
+ mbx@20000000 {
+ compatible = "fsl,mpc5121-mbx";
+ reg = <0x20000000 0x4000>;
+ interrupts = <66 0x8>;
+ };
+
+ sram@30000000 {
+ compatible = "fsl,mpc5121-sram";
+ reg = <0x30000000 0x20000>; /* 128K at 0x30000000 */
+ };
+
+ nfc@40000000 {
+ compatible = "fsl,mpc5121-nfc";
+ reg = <0x40000000 0x100000>; /* 1M at 0x40000000 */
+ interrupts = <6 8>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+
+ localbus@80000020 {
+ compatible = "fsl,mpc5121-localbus";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ reg = <0x80000020 0x40>;
+ interrupts = <7 0x8>;
+ ranges = <0x0 0x0 0xfc000000 0x04000000>;
+ };
+
+ soc@80000000 {
+ compatible = "fsl,mpc5121-immr";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ #interrupt-cells = <2>;
+ ranges = <0x0 0x80000000 0x400000>;
+ reg = <0x80000000 0x400000>;
+ bus-frequency = <66000000>; /* 66 MHz ips bus */
+
+
+ /*
+ * IPIC
+ * interrupts cell = <intr #, sense>
+ * sense values match linux IORESOURCE_IRQ_* defines:
+ * sense == 8: Level, low assertion
+ * sense == 2: Edge, high-to-low change
+ */
+ ipic: interrupt-controller@c00 {
+ compatible = "fsl,mpc5121-ipic", "fsl,ipic";
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <2>;
+ reg = <0xc00 0x100>;
+ };
+
+ /* Watchdog timer */
+ wdt@900 {
+ compatible = "fsl,mpc5121-wdt";
+ reg = <0x900 0x100>;
+ };
+
+ /* Real time clock */
+ rtc@a00 {
+ compatible = "fsl,mpc5121-rtc";
+ reg = <0xa00 0x100>;
+ interrupts = <79 0x8 80 0x8>;
+ };
+
+ /* Reset module */
+ reset@e00 {
+ compatible = "fsl,mpc5121-reset";
+ reg = <0xe00 0x100>;
+ };
+
+ /* Clock control */
+ clock@f00 {
+ compatible = "fsl,mpc5121-clock";
+ reg = <0xf00 0x100>;
+ };
+
+ /* Power Management Controller */
+ pmc@1000{
+ compatible = "fsl,mpc5121-pmc";
+ reg = <0x1000 0x100>;
+ interrupts = <83 0x8>;
+ };
+
+ gpio@1100 {
+ compatible = "fsl,mpc5121-gpio";
+ reg = <0x1100 0x100>;
+ interrupts = <78 0x8>;
+ };
+
+ can@1300 {
+ compatible = "fsl,mpc5121-mscan";
+ reg = <0x1300 0x80>;
+ interrupts = <12 0x8>;
+ };
+
+ can@1380 {
+ compatible = "fsl,mpc5121-mscan";
+ reg = <0x1380 0x80>;
+ interrupts = <13 0x8>;
+ };
+
+ sdhc@1500 {
+ compatible = "fsl,mpc5121-sdhc";
+ reg = <0x1500 0x100>;
+ interrupts = <8 0x8>;
+ };
+
+ i2c@1700 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,mpc5121-i2c", "fsl-i2c";
+ reg = <0x1700 0x20>;
+ interrupts = <9 0x8>;
+ };
+
+ i2c@1720 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,mpc5121-i2c", "fsl-i2c";
+ reg = <0x1720 0x20>;
+ interrupts = <10 0x8>;
+ };
+
+ i2c@1740 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,mpc5121-i2c", "fsl-i2c";
+ reg = <0x1740 0x20>;
+ interrupts = <11 0x8>;
+ };
+
+ i2ccontrol@1760 {
+ compatible = "fsl,mpc5121-i2c-ctrl";
+ reg = <0x1760 0x8>;
+ };
+
+ axe@2000 {
+ compatible = "fsl,mpc5121-axe";
+ reg = <0x2000 0x100>;
+ interrupts = <42 0x8>;
+ };
+
+ display@2100 {
+ compatible = "fsl,mpc5121-diu";
+ reg = <0x2100 0x100>;
+ interrupts = <64 0x8>;
+ };
+
+ can@2300 {
+ compatible = "fsl,mpc5121-mscan";
+ reg = <0x2300 0x80>;
+ interrupts = <90 0x8>;
+ };
+
+ can@2380 {
+ compatible = "fsl,mpc5121-mscan";
+ reg = <0x2380 0x80>;
+ interrupts = <91 0x8>;
+ };
+
+ viu@2400 {
+ compatible = "fsl,mpc5121-viu";
+ reg = <0x2400 0x400>;
+ interrupts = <67 0x8>;
+ };
+
+ mdio@2800 {
+ compatible = "fsl,mpc5121-fec-mdio";
+ reg = <0x2800 0x800>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ eth0: ethernet@2800 {
+ device_type = "network";
+ compatible = "fsl,mpc5121-fec";
+ reg = <0x2800 0x800>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <4 0x8>;
+ };
+
+ /* USB1 using external ULPI PHY */
+ usb@3000 {
+ compatible = "fsl,mpc5121-usb2-dr";
+ reg = <0x3000 0x600>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <43 0x8>;
+ dr_mode = "otg";
+ phy_type = "ulpi";
+ };
+
+ /* USB0 using internal UTMI PHY */
+ usb@4000 {
+ compatible = "fsl,mpc5121-usb2-dr";
+ reg = <0x4000 0x600>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <44 0x8>;
+ dr_mode = "otg";
+ phy_type = "utmi_wide";
+ };
+
+ /* IO control */
+ ioctl@a000 {
+ compatible = "fsl,mpc5121-ioctl";
+ reg = <0xA000 0x1000>;
+ };
+
+ /* LocalPlus controller */
+ lpc@10000 {
+ compatible = "fsl,mpc5121-lpc";
+ reg = <0x10000 0x200>;
+ };
+
+ pata@10200 {
+ compatible = "fsl,mpc5121-pata";
+ reg = <0x10200 0x100>;
+ interrupts = <5 0x8>;
+ };
+
+ /* 512x PSCs are not 52xx PSC compatible */
+
+ /* PSC0 */
+ psc@11000 {
+ compatible = "fsl,mpc5121-psc";
+ reg = <0x11000 0x100>;
+ interrupts = <40 0x8>;
+ fsl,rx-fifo-size = <16>;
+ fsl,tx-fifo-size = <16>;
+ };
+
+ /* PSC1 */
+ psc@11100 {
+ compatible = "fsl,mpc5121-psc";
+ reg = <0x11100 0x100>;
+ interrupts = <40 0x8>;
+ fsl,rx-fifo-size = <16>;
+ fsl,tx-fifo-size = <16>;
+ };
+
+ /* PSC2 */
+ psc@11200 {
+ compatible = "fsl,mpc5121-psc";
+ reg = <0x11200 0x100>;
+ interrupts = <40 0x8>;
+ fsl,rx-fifo-size = <16>;
+ fsl,tx-fifo-size = <16>;
+ };
+
+ /* PSC3 */
+ psc@11300 {
+ compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
+ reg = <0x11300 0x100>;
+ interrupts = <40 0x8>;
+ fsl,rx-fifo-size = <16>;
+ fsl,tx-fifo-size = <16>;
+ };
+
+ /* PSC4 */
+ psc@11400 {
+ compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
+ reg = <0x11400 0x100>;
+ interrupts = <40 0x8>;
+ fsl,rx-fifo-size = <16>;
+ fsl,tx-fifo-size = <16>;
+ };
+
+ /* PSC5 */
+ psc@11500 {
+ compatible = "fsl,mpc5121-psc";
+ reg = <0x11500 0x100>;
+ interrupts = <40 0x8>;
+ fsl,rx-fifo-size = <16>;
+ fsl,tx-fifo-size = <16>;
+ };
+
+ /* PSC6 */
+ psc@11600 {
+ compatible = "fsl,mpc5121-psc";
+ reg = <0x11600 0x100>;
+ interrupts = <40 0x8>;
+ fsl,rx-fifo-size = <16>;
+ fsl,tx-fifo-size = <16>;
+ };
+
+ /* PSC7 */
+ psc@11700 {
+ compatible = "fsl,mpc5121-psc";
+ reg = <0x11700 0x100>;
+ interrupts = <40 0x8>;
+ fsl,rx-fifo-size = <16>;
+ fsl,tx-fifo-size = <16>;
+ };
+
+ /* PSC8 */
+ psc@11800 {
+ compatible = "fsl,mpc5121-psc";
+ reg = <0x11800 0x100>;
+ interrupts = <40 0x8>;
+ fsl,rx-fifo-size = <16>;
+ fsl,tx-fifo-size = <16>;
+ };
+
+ /* PSC9 */
+ psc@11900 {
+ compatible = "fsl,mpc5121-psc";
+ reg = <0x11900 0x100>;
+ interrupts = <40 0x8>;
+ fsl,rx-fifo-size = <16>;
+ fsl,tx-fifo-size = <16>;
+ };
+
+ /* PSC10 */
+ psc@11a00 {
+ compatible = "fsl,mpc5121-psc";
+ reg = <0x11a00 0x100>;
+ interrupts = <40 0x8>;
+ fsl,rx-fifo-size = <16>;
+ fsl,tx-fifo-size = <16>;
+ };
+
+ /* PSC11 */
+ psc@11b00 {
+ compatible = "fsl,mpc5121-psc";
+ reg = <0x11b00 0x100>;
+ interrupts = <40 0x8>;
+ fsl,rx-fifo-size = <16>;
+ fsl,tx-fifo-size = <16>;
+ };
+
+ pscfifo@11f00 {
+ compatible = "fsl,mpc5121-psc-fifo";
+ reg = <0x11f00 0x100>;
+ interrupts = <40 0x8>;
+ };
+
+ dma@14000 {
+ compatible = "fsl,mpc5121-dma";
+ reg = <0x14000 0x1800>;
+ interrupts = <65 0x8>;
+ };
+ };
+
+ pci: pci@80008500 {
+ compatible = "fsl,mpc5121-pci";
+ device_type = "pci";
+ interrupts = <1 0x8>;
+ clock-frequency = <0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+
+ reg = <0x80008500 0x100 /* internal registers */
+ 0x80008300 0x8>; /* config space access registers */
+ bus-range = <0x0 0x0>;
+ ranges = <0x42000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000
+ 0x02000000 0x0 0xb0000000 0xb0000000 0x0 0x10000000
+ 0x01000000 0x0 0x00000000 0x84000000 0x0 0x01000000>;
+ };
+};
diff --git a/arch/powerpc/boot/dts/mpc5121ads.dts b/arch/powerpc/boot/dts/mpc5121ads.dts
index c9ef6bb..f269b13 100644
--- a/arch/powerpc/boot/dts/mpc5121ads.dts
+++ b/arch/powerpc/boot/dts/mpc5121ads.dts
@@ -1,7 +1,7 @@
/*
* MPC5121E ADS Device Tree Source
*
- * Copyright 2007,2008 Freescale Semiconductor Inc.
+ * Copyright 2007-2008 Freescale Semiconductor Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
@@ -9,74 +9,26 @@
* option) any later version.
*/
-/dts-v1/;
+/include/ "mpc5121.dtsi"
/ {
model = "mpc5121ads";
compatible = "fsl,mpc5121ads";
- #address-cells = <1>;
- #size-cells = <1>;
-
- aliases {
- pci = &pci;
- };
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- PowerPC,5121@0 {
- device_type = "cpu";
- reg = <0>;
- d-cache-line-size = <0x20>; // 32 bytes
- i-cache-line-size = <0x20>; // 32 bytes
- d-cache-size = <0x8000>; // L1, 32K
- i-cache-size = <0x8000>; // L1, 32K
- timebase-frequency = <49500000>;// 49.5 MHz (csb/4)
- bus-frequency = <198000000>; // 198 MHz csb bus
- clock-frequency = <396000000>; // 396 MHz ppc core
- };
- };
-
- memory {
- device_type = "memory";
- reg = <0x00000000 0x10000000>; // 256MB at 0
- };
-
- mbx@20000000 {
- compatible = "fsl,mpc5121-mbx";
- reg = <0x20000000 0x4000>;
- interrupts = <66 0x8>;
- interrupt-parent = < &ipic >;
- };
-
- sram@30000000 {
- compatible = "fsl,mpc5121-sram";
- reg = <0x30000000 0x20000>; // 128K at 0x30000000
- };
nfc@40000000 {
- compatible = "fsl,mpc5121-nfc";
- reg = <0x40000000 0x100000>; // 1M at 0x40000000
- interrupts = <6 8>;
- interrupt-parent = < &ipic >;
- #address-cells = <1>;
- #size-cells = <1>;
- // ADS has two Hynix 512MB Nand flash chips in a single
- // stacked package.
+ /*
+ * ADS has two Hynix 512MB Nand flash chips in a single
+ * stacked package.
+ */
chips = <2>;
+
nand@0 {
label = "nand";
- reg = <0x00000000 0x40000000>; // 512MB + 512MB
+ reg = <0x00000000 0x40000000>; /* 512MB + 512MB */
};
};
localbus@80000020 {
- compatible = "fsl,mpc5121-localbus";
- #address-cells = <2>;
- #size-cells = <1>;
- reg = <0x80000020 0x40>;
-
ranges = <0x0 0x0 0xfc000000 0x04000000
0x2 0x0 0x82000000 0x00008000>;
@@ -87,6 +39,7 @@
#size-cells = <1>;
bank-width = <4>;
device-width = <2>;
+
protected@0 {
label = "protected";
reg = <0x00000000 0x00040000>; // first sector is protected
@@ -121,91 +74,18 @@
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x2 0xa 0x5>;
- interrupt-parent = < &ipic >;
- // irq routing
- // all irqs but touch screen are routed to irq0 (ipic 48)
- // touch screen is statically routed to irq1 (ipic 17)
- // so don't use it here
+ /* irq routing:
+ * all irqs but touch screen are routed to irq0 (ipic 48)
+ * touch screen is statically routed to irq1 (ipic 17)
+ * so don't use it here
+ */
interrupts = <48 0x8>;
};
};
soc@80000000 {
- compatible = "fsl,mpc5121-immr";
- #address-cells = <1>;
- #size-cells = <1>;
- #interrupt-cells = <2>;
- ranges = <0x0 0x80000000 0x400000>;
- reg = <0x80000000 0x400000>;
- bus-frequency = <66000000>; // 66 MHz ips bus
-
-
- // IPIC
- // interrupts cell = <intr #, sense>
- // sense values match linux IORESOURCE_IRQ_* defines:
- // sense == 8: Level, low assertion
- // sense == 2: Edge, high-to-low change
- //
- ipic: interrupt-controller@c00 {
- compatible = "fsl,mpc5121-ipic", "fsl,ipic";
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <2>;
- reg = <0xc00 0x100>;
- };
-
- rtc@a00 { // Real time clock
- compatible = "fsl,mpc5121-rtc";
- reg = <0xa00 0x100>;
- interrupts = <79 0x8 80 0x8>;
- interrupt-parent = < &ipic >;
- };
-
- reset@e00 { // Reset module
- compatible = "fsl,mpc5121-reset";
- reg = <0xe00 0x100>;
- };
-
- clock@f00 { // Clock control
- compatible = "fsl,mpc5121-clock";
- reg = <0xf00 0x100>;
- };
-
- pmc@1000{ //Power Management Controller
- compatible = "fsl,mpc5121-pmc";
- reg = <0x1000 0x100>;
- interrupts = <83 0x2>;
- interrupt-parent = < &ipic >;
- };
-
- gpio@1100 {
- compatible = "fsl,mpc5121-gpio";
- reg = <0x1100 0x100>;
- interrupts = <78 0x8>;
- interrupt-parent = < &ipic >;
- };
-
- can@1300 {
- compatible = "fsl,mpc5121-mscan";
- interrupts = <12 0x8>;
- interrupt-parent = < &ipic >;
- reg = <0x1300 0x80>;
- };
-
- can@1380 {
- compatible = "fsl,mpc5121-mscan";
- interrupts = <13 0x8>;
- interrupt-parent = < &ipic >;
- reg = <0x1380 0x80>;
- };
i2c@1700 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,mpc5121-i2c", "fsl-i2c";
- reg = <0x1700 0x20>;
- interrupts = <9 0x8>;
- interrupt-parent = < &ipic >;
fsl,preserve-clocking;
hwmon@4a {
@@ -224,196 +104,75 @@
};
};
- i2c@1720 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,mpc5121-i2c", "fsl-i2c";
- reg = <0x1720 0x20>;
- interrupts = <10 0x8>;
- interrupt-parent = < &ipic >;
- };
-
- i2c@1740 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,mpc5121-i2c", "fsl-i2c";
- reg = <0x1740 0x20>;
- interrupts = <11 0x8>;
- interrupt-parent = < &ipic >;
+ eth0: ethernet@2800 {
+ phy-handle = <&phy0>;
};
- i2ccontrol@1760 {
- compatible = "fsl,mpc5121-i2c-ctrl";
- reg = <0x1760 0x8>;
+ can@2300 {
+ status = "disabled";
};
- axe@2000 {
- compatible = "fsl,mpc5121-axe";
- reg = <0x2000 0x100>;
- interrupts = <42 0x8>;
- interrupt-parent = < &ipic >;
+ can@2380 {
+ status = "disabled";
};
- display@2100 {
- compatible = "fsl,mpc5121-diu";
- reg = <0x2100 0x100>;
- interrupts = <64 0x8>;
- interrupt-parent = < &ipic >;
+ viu@2400 {
+ status = "disabled";
};
mdio@2800 {
- compatible = "fsl,mpc5121-fec-mdio";
- reg = <0x2800 0x800>;
- #address-cells = <1>;
- #size-cells = <0>;
- phy: ethernet-phy@0 {
+ phy0: ethernet-phy@0 {
reg = <1>;
- device_type = "ethernet-phy";
};
};
- ethernet@2800 {
- device_type = "network";
- compatible = "fsl,mpc5121-fec";
- reg = <0x2800 0x800>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <4 0x8>;
- interrupt-parent = < &ipic >;
- phy-handle = < &phy >;
- fsl,align-tx-packets = <4>;
+ /* mpc5121ads only uses USB0 */
+ usb@3000 {
+ status = "disabled";
};
- // 5121e has two dr usb modules
- // mpc5121_ads only uses USB0
-
- // USB1 using external ULPI PHY
- //usb@3000 {
- // compatible = "fsl,mpc5121-usb2-dr";
- // reg = <0x3000 0x1000>;
- // #address-cells = <1>;
- // #size-cells = <0>;
- // interrupt-parent = < &ipic >;
- // interrupts = <43 0x8>;
- // dr_mode = "otg";
- // phy_type = "ulpi";
- //};
-
- // USB0 using internal UTMI PHY
+ /* USB0 using internal UTMI PHY */
usb@4000 {
- compatible = "fsl,mpc5121-usb2-dr";
- reg = <0x4000 0x1000>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupt-parent = < &ipic >;
- interrupts = <44 0x8>;
- dr_mode = "otg";
- phy_type = "utmi_wide";
+ dr_mode = "host";
fsl,invert-drvvbus;
fsl,invert-pwr-fault;
};
- // IO control
- ioctl@a000 {
- compatible = "fsl,mpc5121-ioctl";
- reg = <0xA000 0x1000>;
- };
-
- pata@10200 {
- compatible = "fsl,mpc5121-pata";
- reg = <0x10200 0x100>;
- interrupts = <5 0x8>;
- interrupt-parent = < &ipic >;
- };
-
- // 512x PSCs are not 52xx PSC compatible
- // PSC3 serial port A aka ttyPSC0
- serial@11300 {
- device_type = "serial";
+ /* PSC3 serial port A aka ttyPSC0 */
+ psc@11300 {
compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
- // Logical port assignment needed until driver
- // learns to use aliases
- port-number = <0>;
- cell-index = <3>;
- reg = <0x11300 0x100>;
- interrupts = <40 0x8>;
- interrupt-parent = < &ipic >;
- rx-fifo-size = <16>;
- tx-fifo-size = <16>;
};
- // PSC4 serial port B aka ttyPSC1
- serial@11400 {
- device_type = "serial";
+ /* PSC4 serial port B aka ttyPSC1 */
+ psc@11400 {
compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
- // Logical port assignment needed until driver
- // learns to use aliases
- port-number = <1>;
- cell-index = <4>;
- reg = <0x11400 0x100>;
- interrupts = <40 0x8>;
- interrupt-parent = < &ipic >;
- rx-fifo-size = <16>;
- tx-fifo-size = <16>;
};
- // PSC5 in ac97 mode
- ac97@11500 {
+ /* PSC5 in ac97 mode */
+ ac97: psc@11500 {
compatible = "fsl,mpc5121-psc-ac97", "fsl,mpc5121-psc";
- cell-index = <5>;
- reg = <0x11500 0x100>;
- interrupts = <40 0x8>;
- interrupt-parent = < &ipic >;
fsl,mode = "ac97-slave";
- rx-fifo-size = <384>;
- tx-fifo-size = <384>;
- };
-
- pscfifo@11f00 {
- compatible = "fsl,mpc5121-psc-fifo";
- reg = <0x11f00 0x100>;
- interrupts = <40 0x8>;
- interrupt-parent = < &ipic >;
+ fsl,rx-fifo-size = <384>;
+ fsl,tx-fifo-size = <384>;
};
-
- dma@14000 {
- compatible = "fsl,mpc5121-dma";
- reg = <0x14000 0x1800>;
- interrupts = <65 0x8>;
- interrupt-parent = < &ipic >;
- };
-
};
pci: pci@80008500 {
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
- // IDSEL 0x15 - Slot 1 PCI
+ /* IDSEL 0x15 - Slot 1 PCI */
0xa800 0x0 0x0 0x1 &cpld_pic 0x0 0x8
0xa800 0x0 0x0 0x2 &cpld_pic 0x1 0x8
0xa800 0x0 0x0 0x3 &cpld_pic 0x2 0x8
0xa800 0x0 0x0 0x4 &cpld_pic 0x3 0x8
- // IDSEL 0x16 - Slot 2 MiniPCI
+ /* IDSEL 0x16 - Slot 2 MiniPCI */
0xb000 0x0 0x0 0x1 &cpld_pic 0x4 0x8
0xb000 0x0 0x0 0x2 &cpld_pic 0x5 0x8
- // IDSEL 0x17 - Slot 3 MiniPCI
+ /* IDSEL 0x17 - Slot 3 MiniPCI */
0xb800 0x0 0x0 0x1 &cpld_pic 0x6 0x8
0xb800 0x0 0x0 0x2 &cpld_pic 0x7 0x8
>;
- interrupt-parent = < &ipic >;
- interrupts = <1 0x8>;
- bus-range = <0 0>;
- ranges = <0x42000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000
- 0x02000000 0x0 0xb0000000 0xb0000000 0x0 0x10000000
- 0x01000000 0x0 0x00000000 0x84000000 0x0 0x01000000>;
- clock-frequency = <0>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- reg = <0x80008500 0x100 /* internal registers */
- 0x80008300 0x8>; /* config space access registers */
- compatible = "fsl,mpc5121-pci";
- device_type = "pci";
};
};
--
1.7.5.4
^ permalink raw reply related [flat|nested] 4+ messages in thread
* [PATCH 2/4] powerpc/mpc5121: pdm360ng.dts: use common mpc5121.dtsi
2013-01-14 20:34 [PATCH 1/4] powerpc/mpc5121: add common .dtsi and use it in mpc5121ads.dts Anatolij Gustschin
@ 2013-01-14 20:34 ` Anatolij Gustschin
2013-01-14 20:34 ` [PATCH 3/4] mpc5121: remove obsolete cell-index property from PSC clock code Anatolij Gustschin
2013-01-14 20:34 ` [PATCH 4/4] mpc5121: don't check PSC ac97 using node name Anatolij Gustschin
2 siblings, 0 replies; 4+ messages in thread
From: Anatolij Gustschin @ 2013-01-14 20:34 UTC (permalink / raw)
To: linuxppc-dev
Change dts file for pdm360ng board to use common mpc5121
SoC dtsi file.
Signed-off-by: Anatolij Gustschin <agust@denx.de>
---
arch/powerpc/boot/dts/pdm360ng.dts | 273 ++++--------------------------------
1 files changed, 31 insertions(+), 242 deletions(-)
diff --git a/arch/powerpc/boot/dts/pdm360ng.dts b/arch/powerpc/boot/dts/pdm360ng.dts
index 94dfa5c..0b06947 100644
--- a/arch/powerpc/boot/dts/pdm360ng.dts
+++ b/arch/powerpc/boot/dts/pdm360ng.dts
@@ -13,7 +13,7 @@
* option) any later version.
*/
-/dts-v1/;
+/include/ "mpc5121.dtsi"
/ {
model = "pdm360ng";
@@ -22,38 +22,12 @@
#size-cells = <1>;
interrupt-parent = <&ipic>;
- aliases {
- ethernet0 = ð0;
- };
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- PowerPC,5121@0 {
- device_type = "cpu";
- reg = <0>;
- d-cache-line-size = <0x20>; // 32 bytes
- i-cache-line-size = <0x20>; // 32 bytes
- d-cache-size = <0x8000>; // L1, 32K
- i-cache-size = <0x8000>; // L1, 32K
- timebase-frequency = <49500000>;// 49.5 MHz (csb/4)
- bus-frequency = <198000000>; // 198 MHz csb bus
- clock-frequency = <396000000>; // 396 MHz ppc core
- };
- };
-
memory {
device_type = "memory";
reg = <0x00000000 0x20000000>; // 512MB at 0
};
nfc@40000000 {
- compatible = "fsl,mpc5121-nfc";
- reg = <0x40000000 0x100000>;
- interrupts = <0x6 0x8>;
- #address-cells = <0x1>;
- #size-cells = <0x1>;
bank-width = <0x1>;
chips = <0x1>;
@@ -63,17 +37,7 @@
};
};
- sram@50000000 {
- compatible = "fsl,mpc5121-sram";
- reg = <0x50000000 0x20000>; // 128K at 0x50000000
- };
-
localbus@80000020 {
- compatible = "fsl,mpc5121-localbus";
- #address-cells = <2>;
- #size-cells = <1>;
- reg = <0x80000020 0x40>;
-
ranges = <0x0 0x0 0xf0000000 0x10000000 /* Flash */
0x2 0x0 0x50040000 0x00020000>; /* CS2: MRAM */
@@ -129,74 +93,8 @@
};
soc@80000000 {
- compatible = "fsl,mpc5121-immr";
- #address-cells = <1>;
- #size-cells = <1>;
- #interrupt-cells = <2>;
- ranges = <0x0 0x80000000 0x400000>;
- reg = <0x80000000 0x400000>;
- bus-frequency = <66000000>; // 66 MHz ips bus
-
- // IPIC
- // interrupts cell = <intr #, sense>
- // sense values match linux IORESOURCE_IRQ_* defines:
- // sense == 8: Level, low assertion
- // sense == 2: Edge, high-to-low change
- //
- ipic: interrupt-controller@c00 {
- compatible = "fsl,mpc5121-ipic", "fsl,ipic";
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <2>;
- reg = <0xc00 0x100>;
- };
-
- rtc@a00 { // Real time clock
- compatible = "fsl,mpc5121-rtc";
- reg = <0xa00 0x100>;
- interrupts = <79 0x8 80 0x8>;
- };
-
- reset@e00 { // Reset module
- compatible = "fsl,mpc5121-reset";
- reg = <0xe00 0x100>;
- };
-
- clock@f00 { // Clock control
- compatible = "fsl,mpc5121-clock";
- reg = <0xf00 0x100>;
- };
-
- pmc@1000{ //Power Management Controller
- compatible = "fsl,mpc5121-pmc";
- reg = <0x1000 0x100>;
- interrupts = <83 0x2>;
- };
-
- gpio@1100 {
- compatible = "fsl,mpc5121-gpio";
- reg = <0x1100 0x100>;
- interrupts = <78 0x8>;
- };
-
- can@1300 {
- compatible = "fsl,mpc5121-mscan";
- interrupts = <12 0x8>;
- reg = <0x1300 0x80>;
- };
-
- can@1380 {
- compatible = "fsl,mpc5121-mscan";
- interrupts = <13 0x8>;
- reg = <0x1380 0x80>;
- };
i2c@1700 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,mpc5121-i2c";
- reg = <0x1700 0x20>;
- interrupts = <0x9 0x8>;
fsl,preserve-clocking;
eeprom@50 {
@@ -210,201 +108,92 @@
};
};
- i2c@1740 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,mpc5121-i2c";
- reg = <0x1740 0x20>;
- interrupts = <0xb 0x8>;
- fsl,preserve-clocking;
- };
-
- i2ccontrol@1760 {
- compatible = "fsl,mpc5121-i2c-ctrl";
- reg = <0x1760 0x8>;
- };
-
- axe@2000 {
- compatible = "fsl,mpc5121-axe";
- reg = <0x2000 0x100>;
- interrupts = <42 0x8>;
- };
-
- display@2100 {
- compatible = "fsl,mpc5121-diu";
- reg = <0x2100 0x100>;
- interrupts = <64 0x8>;
+ i2c@1720 {
+ status = "disabled";
};
- can@2300 {
- compatible = "fsl,mpc5121-mscan";
- interrupts = <90 0x8>;
- reg = <0x2300 0x80>;
- };
-
- can@2380 {
- compatible = "fsl,mpc5121-mscan";
- interrupts = <91 0x8>;
- reg = <0x2380 0x80>;
+ i2c@1740 {
+ fsl,preserve-clocking;
};
- viu@2400 {
- compatible = "fsl,mpc5121-viu";
- reg = <0x2400 0x400>;
- interrupts = <67 0x8>;
+ ethernet@2800 {
+ phy-handle = <&phy0>;
};
mdio@2800 {
- compatible = "fsl,mpc5121-fec-mdio";
- reg = <0x2800 0x200>;
- #address-cells = <1>;
- #size-cells = <0>;
- phy: ethernet-phy@0 {
+ phy0: ethernet-phy@1f {
compatible = "smsc,lan8700";
reg = <0x1f>;
};
};
- eth0: ethernet@2800 {
- compatible = "fsl,mpc5121-fec";
- reg = <0x2800 0x200>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <4 0x8>;
- phy-handle = < &phy >;
- };
-
- // USB1 using external ULPI PHY
+ /* USB1 using external ULPI PHY */
usb@3000 {
- compatible = "fsl,mpc5121-usb2-dr";
- reg = <0x3000 0x600>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <43 0x8>;
dr_mode = "host";
- phy_type = "ulpi";
};
- // USB0 using internal UTMI PHY
+ /* USB0 using internal UTMI PHY */
usb@4000 {
- compatible = "fsl,mpc5121-usb2-dr";
- reg = <0x4000 0x600>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <44 0x8>;
- dr_mode = "otg";
- phy_type = "utmi_wide";
fsl,invert-pwr-fault;
};
- // IO control
- ioctl@a000 {
- compatible = "fsl,mpc5121-ioctl";
- reg = <0xA000 0x1000>;
- };
-
- // 512x PSCs are not 52xx PSCs compatible
- serial@11000 {
+ psc@11000 {
compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
- cell-index = <0>;
- reg = <0x11000 0x100>;
- interrupts = <40 0x8>;
- fsl,rx-fifo-size = <16>;
- fsl,tx-fifo-size = <16>;
};
- serial@11100 {
+ psc@11100 {
compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
- cell-index = <1>;
- reg = <0x11100 0x100>;
- interrupts = <40 0x8>;
- fsl,rx-fifo-size = <16>;
- fsl,tx-fifo-size = <16>;
};
- serial@11200 {
+ psc@11200 {
compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
- cell-index = <2>;
- reg = <0x11200 0x100>;
- interrupts = <40 0x8>;
- fsl,rx-fifo-size = <16>;
- fsl,tx-fifo-size = <16>;
};
- serial@11300 {
+ psc@11300 {
compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
- cell-index = <3>;
- reg = <0x11300 0x100>;
- interrupts = <40 0x8>;
- fsl,rx-fifo-size = <16>;
- fsl,tx-fifo-size = <16>;
};
- serial@11400 {
+ psc@11400 {
compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
- cell-index = <4>;
- reg = <0x11400 0x100>;
- interrupts = <40 0x8>;
- fsl,rx-fifo-size = <16>;
- fsl,tx-fifo-size = <16>;
};
- serial@11600 {
- compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
- cell-index = <6>;
- reg = <0x11600 0x100>;
- interrupts = <40 0x8>;
- fsl,rx-fifo-size = <16>;
- fsl,tx-fifo-size = <16>;
+ psc@11500 {
+ status = "disabled";
};
- serial@11800 {
+ psc@11600 {
compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
- cell-index = <8>;
- reg = <0x11800 0x100>;
- interrupts = <40 0x8>;
- fsl,rx-fifo-size = <16>;
- fsl,tx-fifo-size = <16>;
};
- serial@11B00 {
- compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
- cell-index = <11>;
- reg = <0x11B00 0x100>;
- interrupts = <40 0x8>;
- fsl,rx-fifo-size = <16>;
- fsl,tx-fifo-size = <16>;
+ psc@11700 {
+ status = "disabled";
};
- pscfifo@11f00 {
- compatible = "fsl,mpc5121-psc-fifo";
- reg = <0x11f00 0x100>;
- interrupts = <40 0x8>;
+ psc@11800 {
+ compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
};
- spi@11900 {
+ psc@11900 {
compatible = "fsl,mpc5121-psc-spi", "fsl,mpc5121-psc";
- cell-index = <9>;
#address-cells = <1>;
#size-cells = <0>;
- reg = <0x11900 0x100>;
- interrupts = <40 0x8>;
- fsl,rx-fifo-size = <16>;
- fsl,tx-fifo-size = <16>;
- // 7845 touch screen controller
+ /* ADS7845 touch screen controller */
ts@0 {
compatible = "ti,ads7846";
reg = <0x0>;
spi-max-frequency = <3000000>;
- // pen irq is GPIO25
+ /* pen irq is GPIO25 */
interrupts = <78 0x8>;
};
};
- dma@14000 {
- compatible = "fsl,mpc5121-dma";
- reg = <0x14000 0x1800>;
- interrupts = <65 0x8>;
+ psc@11a00 {
+ status = "disabled";
+ };
+
+ psc@11b00 {
+ compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
};
};
};
--
1.7.5.4
^ permalink raw reply related [flat|nested] 4+ messages in thread
* [PATCH 3/4] mpc5121: remove obsolete cell-index property from PSC clock code
2013-01-14 20:34 [PATCH 1/4] powerpc/mpc5121: add common .dtsi and use it in mpc5121ads.dts Anatolij Gustschin
2013-01-14 20:34 ` [PATCH 2/4] powerpc/mpc5121: pdm360ng.dts: use common mpc5121.dtsi Anatolij Gustschin
@ 2013-01-14 20:34 ` Anatolij Gustschin
2013-01-14 20:34 ` [PATCH 4/4] mpc5121: don't check PSC ac97 using node name Anatolij Gustschin
2 siblings, 0 replies; 4+ messages in thread
From: Anatolij Gustschin @ 2013-01-14 20:34 UTC (permalink / raw)
To: linuxppc-dev
Don't use cell-index from device tree, obtain the PSC number
from PSCx register offset.
Signed-off-by: Anatolij Gustschin <agust@denx.de>
---
arch/powerpc/platforms/512x/clock.c | 7 +++----
1 files changed, 3 insertions(+), 4 deletions(-)
diff --git a/arch/powerpc/platforms/512x/clock.c b/arch/powerpc/platforms/512x/clock.c
index 9f771e0..d0095c8 100644
--- a/arch/powerpc/platforms/512x/clock.c
+++ b/arch/powerpc/platforms/512x/clock.c
@@ -680,13 +680,12 @@ static void psc_calc_rate(struct clk *clk, int pscnum, struct device_node *np)
static void psc_clks_init(void)
{
struct device_node *np;
- const u32 *cell_index;
struct platform_device *ofdev;
+ u32 reg;
for_each_compatible_node(np, NULL, "fsl,mpc5121-psc") {
- cell_index = of_get_property(np, "cell-index", NULL);
- if (cell_index) {
- int pscnum = *cell_index;
+ if (!of_property_read_u32(np, "reg", ®)) {
+ int pscnum = (reg & 0xf00) >> 8;
struct clk *clk = psc_dev_clk(pscnum);
clk->flags = CLK_HAS_RATE | CLK_HAS_CTRL;
--
1.7.5.4
^ permalink raw reply related [flat|nested] 4+ messages in thread
* [PATCH 4/4] mpc5121: don't check PSC ac97 using node name
2013-01-14 20:34 [PATCH 1/4] powerpc/mpc5121: add common .dtsi and use it in mpc5121ads.dts Anatolij Gustschin
2013-01-14 20:34 ` [PATCH 2/4] powerpc/mpc5121: pdm360ng.dts: use common mpc5121.dtsi Anatolij Gustschin
2013-01-14 20:34 ` [PATCH 3/4] mpc5121: remove obsolete cell-index property from PSC clock code Anatolij Gustschin
@ 2013-01-14 20:34 ` Anatolij Gustschin
2 siblings, 0 replies; 4+ messages in thread
From: Anatolij Gustschin @ 2013-01-14 20:34 UTC (permalink / raw)
To: linuxppc-dev
The .dtsi now names all PSC nodes as "psc", so this ac97
check won't work. Check for ac97 PSC using compatible
property.
Signed-off-by: Anatolij Gustschin <agust@denx.de>
---
arch/powerpc/platforms/512x/clock.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/arch/powerpc/platforms/512x/clock.c b/arch/powerpc/platforms/512x/clock.c
index d0095c8..7937361 100644
--- a/arch/powerpc/platforms/512x/clock.c
+++ b/arch/powerpc/platforms/512x/clock.c
@@ -695,7 +695,7 @@ static void psc_clks_init(void)
* AC97 is special rate clock does
* not go through normal path
*/
- if (strcmp("ac97", np->name) == 0)
+ if (of_device_is_compatible(np, "fsl,mpc5121-psc-ac97"))
clk->rate = ac97_clk.rate;
else
psc_calc_rate(clk, pscnum, np);
--
1.7.5.4
^ permalink raw reply related [flat|nested] 4+ messages in thread
end of thread, other threads:[~2013-01-14 20:40 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2013-01-14 20:34 [PATCH 1/4] powerpc/mpc5121: add common .dtsi and use it in mpc5121ads.dts Anatolij Gustschin
2013-01-14 20:34 ` [PATCH 2/4] powerpc/mpc5121: pdm360ng.dts: use common mpc5121.dtsi Anatolij Gustschin
2013-01-14 20:34 ` [PATCH 3/4] mpc5121: remove obsolete cell-index property from PSC clock code Anatolij Gustschin
2013-01-14 20:34 ` [PATCH 4/4] mpc5121: don't check PSC ac97 using node name Anatolij Gustschin
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).