linuxppc-dev.lists.ozlabs.org archive mirror
 help / color / mirror / Atom feed
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
To: Wang Dongsheng-B40534 <B40534@freescale.com>
Cc: Wood Scott-B07421 <B07421@freescale.com>,
	Gala Kumar-B11780 <B11780@freescale.com>,
	"linuxppc-dev@lists.ozlabs.org" <linuxppc-dev@lists.ozlabs.org>
Subject: Re: [PATCH 1/3] powerpc/mpic: add irq_set_wake support
Date: Mon, 18 Mar 2013 15:41:33 +0100	[thread overview]
Message-ID: <1363617693.15862.1.camel@pasglop> (raw)
In-Reply-To: <ABB05CD9C9F68C46A5CEDC7F15439259EB6434@039-SN2MPN1-022.039d.mgd.msft.net>

On Mon, 2013-03-18 at 09:28 +0000, Wang Dongsheng-B40534 wrote:
> Hi Benjamin & Kumar,
> 
> I am not sure who can apply these patches...
> 
> Could you apply these patches?

I can but I need somebody to review them, I don't have the bandwidth nor
am I familiar with the FSL changes to the MPIC.

Cheers,
Ben.

> Thanks.
> 
> [1/3] powerpc/mpic: add irq_set_wake support
> http://patchwork.ozlabs.org/patch/226034/
> 
> [2/3] powerpc/mpic: add global timer support
> http://patchwork.ozlabs.org/patch/226035/
> 
> [3/3] powerpc/fsl: add MPIC timer wakeup support
> http://patchwork.ozlabs.org/patch/226036/
> 
> > -----Original Message-----
> > From: Wang Dongsheng-B40534
> > Sent: Friday, March 08, 2013 3:39 PM
> > To: Wood Scott-B07421; Gala Kumar-B11780
> > Cc: linuxppc-dev@lists.ozlabs.org; Wang Dongsheng-B40534
> > Subject: [PATCH 1/3] powerpc/mpic: add irq_set_wake support
> > 
> > Add irq_set_wake support. Just add IRQF_NO_SUSPEND to desc->action->flag.
> > So the wake up interrupt will not be disable in suspend_device_irqs.
> > 
> > Signed-off-by: Wang Dongsheng <dongsheng.wang@freescale.com>
> > ---
> >  arch/powerpc/sysdev/mpic.c |   15 +++++++++++++++
> >  1 files changed, 15 insertions(+), 0 deletions(-)
> > 
> > diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c
> > index 3b2efd4..10e474e 100644
> > --- a/arch/powerpc/sysdev/mpic.c
> > +++ b/arch/powerpc/sysdev/mpic.c
> > @@ -920,6 +920,18 @@ int mpic_set_irq_type(struct irq_data *d, unsigned
> > int flow_type)
> >  	return IRQ_SET_MASK_OK_NOCOPY;
> >  }
> > 
> > +static int mpic_irq_set_wake(struct irq_data *d, unsigned int on) {
> > +	struct irq_desc *desc = container_of(d, struct irq_desc, irq_data);
> > +
> > +	if (on)
> > +		desc->action->flags |= IRQF_NO_SUSPEND;
> > +	else
> > +		desc->action->flags &= ~IRQF_NO_SUSPEND;
> > +
> > +	return 0;
> > +}
> > +
> >  void mpic_set_vector(unsigned int virq, unsigned int vector)  {
> >  	struct mpic *mpic = mpic_from_irq(virq); @@ -957,6 +969,7 @@ static
> > struct irq_chip mpic_irq_chip = {
> >  	.irq_unmask	= mpic_unmask_irq,
> >  	.irq_eoi	= mpic_end_irq,
> >  	.irq_set_type	= mpic_set_irq_type,
> > +	.irq_set_wake	= mpic_irq_set_wake,
> >  };
> > 
> >  #ifdef CONFIG_SMP
> > @@ -971,6 +984,7 @@ static struct irq_chip mpic_tm_chip = {
> >  	.irq_mask	= mpic_mask_tm,
> >  	.irq_unmask	= mpic_unmask_tm,
> >  	.irq_eoi	= mpic_end_irq,
> > +	.irq_set_wake	= mpic_irq_set_wake,
> >  };
> > 
> >  #ifdef CONFIG_MPIC_U3_HT_IRQS
> > @@ -981,6 +995,7 @@ static struct irq_chip mpic_irq_ht_chip = {
> >  	.irq_unmask	= mpic_unmask_ht_irq,
> >  	.irq_eoi	= mpic_end_ht_irq,
> >  	.irq_set_type	= mpic_set_irq_type,
> > +	.irq_set_wake	= mpic_irq_set_wake,
> >  };
> >  #endif /* CONFIG_MPIC_U3_HT_IRQS */
> > 
> > --
> > 1.7.5.1
> 

  reply	other threads:[~2013-03-18 14:41 UTC|newest]

Thread overview: 32+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-03-08  7:38 [PATCH 1/3] powerpc/mpic: add irq_set_wake support Wang Dongsheng
2013-03-08  7:38 ` [PATCH 2/3] powerpc/mpic: add global timer support Wang Dongsheng
2013-03-18 23:46   ` Scott Wood
2013-03-19  7:55     ` Wang Dongsheng-B40534
2013-03-19 22:59       ` Scott Wood
2013-03-20  6:45         ` Wang Dongsheng-B40534
2013-03-20 22:59           ` Scott Wood
2013-03-22  6:14             ` Wang Dongsheng-B40534
2013-03-22 22:29               ` Scott Wood
2013-03-26  3:29                 ` Wang Dongsheng-B40534
2013-03-26 17:31                   ` Scott Wood
2013-03-27  3:23                     ` Wang Dongsheng-B40534
2013-03-27 17:11                       ` Scott Wood
2013-03-28  2:29                         ` Wang Dongsheng-B40534
2013-03-28 19:47                           ` Scott Wood
2013-03-29  1:58                             ` Wang Dongsheng-B40534
2013-03-08  7:38 ` [PATCH 3/3] powerpc/fsl: add MPIC timer wakeup support Wang Dongsheng
2013-03-19  0:30   ` Scott Wood
2013-03-19  6:25     ` Wang Dongsheng-B40534
2013-03-19 22:54       ` Scott Wood
2013-03-20  3:48         ` Wang Dongsheng-B40534
2013-03-20 21:48           ` Scott Wood
2013-03-22  5:46             ` Wang Dongsheng-B40534
2013-03-22 22:11               ` Scott Wood
2013-03-26  3:27                 ` Wang Dongsheng-B40534
2013-03-26 17:35                   ` Scott Wood
2013-03-27  3:21                     ` Wang Dongsheng-B40534
2013-03-27 20:25                       ` Scott Wood
2013-03-28  3:09                         ` Wang Dongsheng-B40534
2013-03-18  9:28 ` [PATCH 1/3] powerpc/mpic: add irq_set_wake support Wang Dongsheng-B40534
2013-03-18 14:41   ` Benjamin Herrenschmidt [this message]
2013-03-18 14:44     ` Gala Kumar-B11780

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1363617693.15862.1.camel@pasglop \
    --to=benh@kernel.crashing.org \
    --cc=B07421@freescale.com \
    --cc=B11780@freescale.com \
    --cc=B40534@freescale.com \
    --cc=linuxppc-dev@lists.ozlabs.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).