linuxppc-dev.lists.ozlabs.org archive mirror
 help / color / mirror / Atom feed
* Re: [PATCH 1/2] DMA: Freescale: Add new 8-channel DMA engine device tree nodes
       [not found] <1372650378-2936-1-git-send-email-hongbo.zhang@freescale.com>
@ 2013-07-03  3:53 ` Hongbo Zhang
  2013-07-03  7:48   ` Hongbo Zhang
  0 siblings, 1 reply; 4+ messages in thread
From: Hongbo Zhang @ 2013-07-03  3:53 UTC (permalink / raw)
  To: hongbo.zhang
  Cc: vinod.koul, devicetree-discuss, linux-kernel, vakul, djbw,
	scottwood, linuxppc-dev

hmm...add the devicetree-discuss@lists.ozlabs.org into list.

Note that we are discussing a better naming for this new compatible 
property in the corresponding [PATCH 2/2], so I will resend a v2 of this 
patch.


On 07/01/2013 11:46 AM, hongbo.zhang@freescale.com wrote:
> From: Hongbo Zhang <hongbo.zhang@freescale.com>
>
> Freescale QorIQ T4 and B4 introduce new 8-channel DMA engines, this patch add
> the device tree nodes for them.
>
> Signed-off-by: Hongbo Zhang <hongbo.zhang@freescale.com>
> ---
>   arch/powerpc/boot/dts/fsl/qoriq-dma2-0.dtsi |   90 +++++++++++++++++++++++++++
>   arch/powerpc/boot/dts/fsl/qoriq-dma2-1.dtsi |   90 +++++++++++++++++++++++++++
>   arch/powerpc/boot/dts/fsl/t4240si-post.dtsi |    4 +-
>   3 files changed, 182 insertions(+), 2 deletions(-)
>   create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-dma2-0.dtsi
>   create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-dma2-1.dtsi
>
> diff --git a/arch/powerpc/boot/dts/fsl/qoriq-dma2-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-dma2-0.dtsi
> new file mode 100644
> index 0000000..c626c49
> --- /dev/null
> +++ b/arch/powerpc/boot/dts/fsl/qoriq-dma2-0.dtsi
> @@ -0,0 +1,90 @@
> +/*
> + * QorIQ DMA device tree stub [ controller @ offset 0x100000 ]
> + *
> + * Copyright 2011-2013 Freescale Semiconductor Inc.
> + *
> + * Redistribution and use in source and binary forms, with or without
> + * modification, are permitted provided that the following conditions are met:
> + *     * Redistributions of source code must retain the above copyright
> + *       notice, this list of conditions and the following disclaimer.
> + *     * Redistributions in binary form must reproduce the above copyright
> + *       notice, this list of conditions and the following disclaimer in the
> + *       documentation and/or other materials provided with the distribution.
> + *     * Neither the name of Freescale Semiconductor nor the
> + *       names of its contributors may be used to endorse or promote products
> + *       derived from this software without specific prior written permission.
> + *
> + *
> + * ALTERNATIVELY, this software may be distributed under the terms of the
> + * GNU General Public License ("GPL") as published by the Free Software
> + * Foundation, either version 2 of that License or (at your option) any
> + * later version.
> + *
> + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
> + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
> + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
> + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
> + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
> + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
> + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
> + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
> + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
> + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> + */
> +
> +dma0: dma@100300 {
> +	#address-cells = <1>;
> +	#size-cells = <1>;
> +	compatible = "fsl,eloplus-dma2";
> +	reg = <0x100300 0x4 0x100600 0x4>;
> +	ranges = <0x0 0x100100 0x500>;
> +	cell-index = <0>;
> +	dma-channel@0 {
> +		compatible = "fsl,eloplus-dma-channel";
> +		reg = <0x0 0x80>;
> +		cell-index = <0>;
> +		interrupts = <28 2 0 0>;
> +	};
> +	dma-channel@80 {
> +		compatible = "fsl,eloplus-dma-channel";
> +		reg = <0x80 0x80>;
> +		cell-index = <1>;
> +		interrupts = <29 2 0 0>;
> +	};
> +	dma-channel@100 {
> +		compatible = "fsl,eloplus-dma-channel";
> +		reg = <0x100 0x80>;
> +		cell-index = <2>;
> +		interrupts = <30 2 0 0>;
> +	};
> +	dma-channel@180 {
> +		compatible = "fsl,eloplus-dma-channel";
> +		reg = <0x180 0x80>;
> +		cell-index = <3>;
> +		interrupts = <31 2 0 0>;
> +	};
> +	dma-channel@300 {
> +		compatible = "fsl,eloplus-dma-channel";
> +		reg = <0x300 0x80>;
> +		cell-index = <4>;
> +		interrupts = <76 2 0 0>;
> +	};
> +	dma-channel@380 {
> +		compatible = "fsl,eloplus-dma-channel";
> +		reg = <0x380 0x80>;
> +		cell-index = <5>;
> +		interrupts = <77 2 0 0>;
> +	};
> +	dma-channel@400 {
> +		compatible = "fsl,eloplus-dma-channel";
> +		reg = <0x400 0x80>;
> +		cell-index = <6>;
> +		interrupts = <78 2 0 0>;
> +	};
> +	dma-channel@480 {
> +		compatible = "fsl,eloplus-dma-channel";
> +		reg = <0x480 0x80>;
> +		cell-index = <7>;
> +		interrupts = <79 2 0 0>;
> +	};
> +};
> diff --git a/arch/powerpc/boot/dts/fsl/qoriq-dma2-1.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-dma2-1.dtsi
> new file mode 100644
> index 0000000..980ea77
> --- /dev/null
> +++ b/arch/powerpc/boot/dts/fsl/qoriq-dma2-1.dtsi
> @@ -0,0 +1,90 @@
> +/*
> + * QorIQ DMA device tree stub [ controller @ offset 0x101000 ]
> + *
> + * Copyright 2011-2013 Freescale Semiconductor Inc.
> + *
> + * Redistribution and use in source and binary forms, with or without
> + * modification, are permitted provided that the following conditions are met:
> + *     * Redistributions of source code must retain the above copyright
> + *       notice, this list of conditions and the following disclaimer.
> + *     * Redistributions in binary form must reproduce the above copyright
> + *       notice, this list of conditions and the following disclaimer in the
> + *       documentation and/or other materials provided with the distribution.
> + *     * Neither the name of Freescale Semiconductor nor the
> + *       names of its contributors may be used to endorse or promote products
> + *       derived from this software without specific prior written permission.
> + *
> + *
> + * ALTERNATIVELY, this software may be distributed under the terms of the
> + * GNU General Public License ("GPL") as published by the Free Software
> + * Foundation, either version 2 of that License or (at your option) any
> + * later version.
> + *
> + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
> + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
> + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
> + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
> + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
> + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
> + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
> + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
> + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
> + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> + */
> +
> +dma1: dma@101300 {
> +	#address-cells = <1>;
> +	#size-cells = <1>;
> +	compatible = "fsl,eloplus-dma2";
> +	reg = <0x101300 0x4 0x101600 0x4>;
> +	ranges = <0x0 0x101100 0x500>;
> +	cell-index = <1>;
> +	dma-channel@0 {
> +		compatible = "fsl,eloplus-dma-channel";
> +		reg = <0x0 0x80>;
> +		cell-index = <0>;
> +		interrupts = <32 2 0 0>;
> +	};
> +	dma-channel@80 {
> +		compatible = "fsl,eloplus-dma-channel";
> +		reg = <0x80 0x80>;
> +		cell-index = <1>;
> +		interrupts = <33 2 0 0>;
> +	};
> +	dma-channel@100 {
> +		compatible = "fsl,eloplus-dma-channel";
> +		reg = <0x100 0x80>;
> +		cell-index = <2>;
> +		interrupts = <34 2 0 0>;
> +	};
> +	dma-channel@180 {
> +		compatible = "fsl,eloplus-dma-channel";
> +		reg = <0x180 0x80>;
> +		cell-index = <3>;
> +		interrupts = <35 2 0 0>;
> +	};
> +	dma-channel@300 {
> +		compatible = "fsl,eloplus-dma-channel";
> +		reg = <0x300 0x80>;
> +		cell-index = <4>;
> +		interrupts = <80 2 0 0>;
> +	};
> +	dma-channel@380 {
> +		compatible = "fsl,eloplus-dma-channel";
> +		reg = <0x380 0x80>;
> +		cell-index = <5>;
> +		interrupts = <81 2 0 0>;
> +	};
> +	dma-channel@400 {
> +		compatible = "fsl,eloplus-dma-channel";
> +		reg = <0x400 0x80>;
> +		cell-index = <6>;
> +		interrupts = <82 2 0 0>;
> +	};
> +	dma-channel@480 {
> +		compatible = "fsl,eloplus-dma-channel";
> +		reg = <0x480 0x80>;
> +		cell-index = <7>;
> +		interrupts = <83 2 0 0>;
> +	};
> +};
> diff --git a/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi b/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi
> index bd611a9..7d8bac6 100644
> --- a/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi
> +++ b/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi
> @@ -387,8 +387,8 @@
>   		reg	   = <0xea000 0x4000>;
>   	};
>   
> -/include/ "qoriq-dma-0.dtsi"
> -/include/ "qoriq-dma-1.dtsi"
> +/include/ "qoriq-dma2-0.dtsi"
> +/include/ "qoriq-dma2-1.dtsi"
>   
>   /include/ "qoriq-espi-0.dtsi"
>   	spi@110000 {

^ permalink raw reply	[flat|nested] 4+ messages in thread

* Re: [PATCH 1/2] DMA: Freescale: Add new 8-channel DMA engine device tree nodes
  2013-07-03  3:53 ` [PATCH 1/2] DMA: Freescale: Add new 8-channel DMA engine device tree nodes Hongbo Zhang
@ 2013-07-03  7:48   ` Hongbo Zhang
  2013-07-03 19:02     ` Scott Wood
  0 siblings, 1 reply; 4+ messages in thread
From: Hongbo Zhang @ 2013-07-03  7:48 UTC (permalink / raw)
  To: Hongbo Zhang
  Cc: vinod.koul, devicetree-discuss, linux-kernel, vakul, djbw,
	scottwood, linuxppc-dev

On 07/03/2013 11:53 AM, Hongbo Zhang wrote:
> hmm...add the devicetree-discuss@lists.ozlabs.org into list.
>
> Note that we are discussing a better naming for this new compatible 
> property in the corresponding [PATCH 2/2], so I will resend a v2 of 
> this patch.
>
>
> On 07/01/2013 11:46 AM, hongbo.zhang@freescale.com wrote:
>> From: Hongbo Zhang <hongbo.zhang@freescale.com>
>>
>> Freescale QorIQ T4 and B4 introduce new 8-channel DMA engines, this 
>> patch add
>> the device tree nodes for them.
>>
>> Signed-off-by: Hongbo Zhang <hongbo.zhang@freescale.com>
>> ---
>>   arch/powerpc/boot/dts/fsl/qoriq-dma2-0.dtsi |   90 
>> +++++++++++++++++++++++++++
>>   arch/powerpc/boot/dts/fsl/qoriq-dma2-1.dtsi |   90 
>> +++++++++++++++++++++++++++
>>   arch/powerpc/boot/dts/fsl/t4240si-post.dtsi |    4 +-
>>   3 files changed, 182 insertions(+), 2 deletions(-)
>>   create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-dma2-0.dtsi
>>   create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-dma2-1.dtsi
Scott, any comment of these two file names?
>>
>> diff --git a/arch/powerpc/boot/dts/fsl/qoriq-dma2-0.dtsi 
>> b/arch/powerpc/boot/dts/fsl/qoriq-dma2-0.dtsi
>> new file mode 100644
>> index 0000000..c626c49
>> --- /dev/null
>> +++ b/arch/powerpc/boot/dts/fsl/qoriq-dma2-0.dtsi
>> @@ -0,0 +1,90 @@
>> +/*
>> + * QorIQ DMA device tree stub [ controller @ offset 0x100000 ]
>> + *
>> + * Copyright 2011-2013 Freescale Semiconductor Inc.
>> + *
>> + * Redistribution and use in source and binary forms, with or without
>> + * modification, are permitted provided that the following 
>> conditions are met:
>> + *     * Redistributions of source code must retain the above copyright
>> + *       notice, this list of conditions and the following disclaimer.
>> + *     * Redistributions in binary form must reproduce the above 
>> copyright
>> + *       notice, this list of conditions and the following 
>> disclaimer in the
>> + *       documentation and/or other materials provided with the 
>> distribution.
>> + *     * Neither the name of Freescale Semiconductor nor the
>> + *       names of its contributors may be used to endorse or promote 
>> products
>> + *       derived from this software without specific prior written 
>> permission.
>> + *
>> + *
>> + * ALTERNATIVELY, this software may be distributed under the terms 
>> of the
>> + * GNU General Public License ("GPL") as published by the Free Software
>> + * Foundation, either version 2 of that License or (at your option) any
>> + * later version.
>> + *
>> + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' 
>> AND ANY
>> + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 
>> IMPLIED
>> + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 
>> PURPOSE ARE
>> + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE 
>> FOR ANY
>> + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 
>> CONSEQUENTIAL DAMAGES
>> + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 
>> OR SERVICES;
>> + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER 
>> CAUSED AND
>> + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 
>> LIABILITY, OR TORT
>> + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE 
>> USE OF THIS
>> + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
>> + */
>> +
>> +dma0: dma@100300 {
>> +    #address-cells = <1>;
>> +    #size-cells = <1>;
>> +    compatible = "fsl,eloplus-dma2";
>> +    reg = <0x100300 0x4 0x100600 0x4>;
>> +    ranges = <0x0 0x100100 0x500>;
>> +    cell-index = <0>;
>> +    dma-channel@0 {
>> +        compatible = "fsl,eloplus-dma-channel";
>> +        reg = <0x0 0x80>;
>> +        cell-index = <0>;
>> +        interrupts = <28 2 0 0>;
>> +    };
>> +    dma-channel@80 {
>> +        compatible = "fsl,eloplus-dma-channel";
>> +        reg = <0x80 0x80>;
>> +        cell-index = <1>;
>> +        interrupts = <29 2 0 0>;
>> +    };
>> +    dma-channel@100 {
>> +        compatible = "fsl,eloplus-dma-channel";
>> +        reg = <0x100 0x80>;
>> +        cell-index = <2>;
>> +        interrupts = <30 2 0 0>;
>> +    };
>> +    dma-channel@180 {
>> +        compatible = "fsl,eloplus-dma-channel";
>> +        reg = <0x180 0x80>;
>> +        cell-index = <3>;
>> +        interrupts = <31 2 0 0>;
>> +    };
>> +    dma-channel@300 {
>> +        compatible = "fsl,eloplus-dma-channel";
>> +        reg = <0x300 0x80>;
>> +        cell-index = <4>;
>> +        interrupts = <76 2 0 0>;
>> +    };
>> +    dma-channel@380 {
>> +        compatible = "fsl,eloplus-dma-channel";
>> +        reg = <0x380 0x80>;
>> +        cell-index = <5>;
>> +        interrupts = <77 2 0 0>;
>> +    };
>> +    dma-channel@400 {
>> +        compatible = "fsl,eloplus-dma-channel";
>> +        reg = <0x400 0x80>;
>> +        cell-index = <6>;
>> +        interrupts = <78 2 0 0>;
>> +    };
>> +    dma-channel@480 {
>> +        compatible = "fsl,eloplus-dma-channel";
>> +        reg = <0x480 0x80>;
>> +        cell-index = <7>;
>> +        interrupts = <79 2 0 0>;
>> +    };
>> +};
>> diff --git a/arch/powerpc/boot/dts/fsl/qoriq-dma2-1.dtsi 
>> b/arch/powerpc/boot/dts/fsl/qoriq-dma2-1.dtsi
>> new file mode 100644
>> index 0000000..980ea77
>> --- /dev/null
>> +++ b/arch/powerpc/boot/dts/fsl/qoriq-dma2-1.dtsi
>> @@ -0,0 +1,90 @@
>> +/*
>> + * QorIQ DMA device tree stub [ controller @ offset 0x101000 ]
>> + *
>> + * Copyright 2011-2013 Freescale Semiconductor Inc.
>> + *
>> + * Redistribution and use in source and binary forms, with or without
>> + * modification, are permitted provided that the following 
>> conditions are met:
>> + *     * Redistributions of source code must retain the above copyright
>> + *       notice, this list of conditions and the following disclaimer.
>> + *     * Redistributions in binary form must reproduce the above 
>> copyright
>> + *       notice, this list of conditions and the following 
>> disclaimer in the
>> + *       documentation and/or other materials provided with the 
>> distribution.
>> + *     * Neither the name of Freescale Semiconductor nor the
>> + *       names of its contributors may be used to endorse or promote 
>> products
>> + *       derived from this software without specific prior written 
>> permission.
>> + *
>> + *
>> + * ALTERNATIVELY, this software may be distributed under the terms 
>> of the
>> + * GNU General Public License ("GPL") as published by the Free Software
>> + * Foundation, either version 2 of that License or (at your option) any
>> + * later version.
>> + *
>> + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' 
>> AND ANY
>> + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 
>> IMPLIED
>> + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 
>> PURPOSE ARE
>> + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE 
>> FOR ANY
>> + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 
>> CONSEQUENTIAL DAMAGES
>> + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 
>> OR SERVICES;
>> + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER 
>> CAUSED AND
>> + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 
>> LIABILITY, OR TORT
>> + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE 
>> USE OF THIS
>> + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
>> + */
>> +
>> +dma1: dma@101300 {
>> +    #address-cells = <1>;
>> +    #size-cells = <1>;
>> +    compatible = "fsl,eloplus-dma2";
>> +    reg = <0x101300 0x4 0x101600 0x4>;
>> +    ranges = <0x0 0x101100 0x500>;
>> +    cell-index = <1>;
>> +    dma-channel@0 {
>> +        compatible = "fsl,eloplus-dma-channel";
>> +        reg = <0x0 0x80>;
>> +        cell-index = <0>;
>> +        interrupts = <32 2 0 0>;
>> +    };
>> +    dma-channel@80 {
>> +        compatible = "fsl,eloplus-dma-channel";
>> +        reg = <0x80 0x80>;
>> +        cell-index = <1>;
>> +        interrupts = <33 2 0 0>;
>> +    };
>> +    dma-channel@100 {
>> +        compatible = "fsl,eloplus-dma-channel";
>> +        reg = <0x100 0x80>;
>> +        cell-index = <2>;
>> +        interrupts = <34 2 0 0>;
>> +    };
>> +    dma-channel@180 {
>> +        compatible = "fsl,eloplus-dma-channel";
>> +        reg = <0x180 0x80>;
>> +        cell-index = <3>;
>> +        interrupts = <35 2 0 0>;
>> +    };
>> +    dma-channel@300 {
>> +        compatible = "fsl,eloplus-dma-channel";
>> +        reg = <0x300 0x80>;
>> +        cell-index = <4>;
>> +        interrupts = <80 2 0 0>;
>> +    };
>> +    dma-channel@380 {
>> +        compatible = "fsl,eloplus-dma-channel";
>> +        reg = <0x380 0x80>;
>> +        cell-index = <5>;
>> +        interrupts = <81 2 0 0>;
>> +    };
>> +    dma-channel@400 {
>> +        compatible = "fsl,eloplus-dma-channel";
>> +        reg = <0x400 0x80>;
>> +        cell-index = <6>;
>> +        interrupts = <82 2 0 0>;
>> +    };
>> +    dma-channel@480 {
>> +        compatible = "fsl,eloplus-dma-channel";
>> +        reg = <0x480 0x80>;
>> +        cell-index = <7>;
>> +        interrupts = <83 2 0 0>;
>> +    };
>> +};
>> diff --git a/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi 
>> b/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi
>> index bd611a9..7d8bac6 100644
>> --- a/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi
>> +++ b/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi
>> @@ -387,8 +387,8 @@
>>           reg       = <0xea000 0x4000>;
>>       };
>>   -/include/ "qoriq-dma-0.dtsi"
>> -/include/ "qoriq-dma-1.dtsi"
>> +/include/ "qoriq-dma2-0.dtsi"
>> +/include/ "qoriq-dma2-1.dtsi"
>>     /include/ "qoriq-espi-0.dtsi"
>>       spi@110000 {
>
>

^ permalink raw reply	[flat|nested] 4+ messages in thread

* Re: [PATCH 1/2] DMA: Freescale: Add new 8-channel DMA engine device tree nodes
  2013-07-03  7:48   ` Hongbo Zhang
@ 2013-07-03 19:02     ` Scott Wood
  0 siblings, 0 replies; 4+ messages in thread
From: Scott Wood @ 2013-07-03 19:02 UTC (permalink / raw)
  To: Hongbo Zhang
  Cc: Hongbo Zhang, devicetree-discuss, linux-kernel, vakul,
	vinod.koul, djbw, linuxppc-dev

On 07/03/2013 02:48:59 AM, Hongbo Zhang wrote:
> On 07/03/2013 11:53 AM, Hongbo Zhang wrote:
>> hmm...add the devicetree-discuss@lists.ozlabs.org into list.
>>=20
>> Note that we are discussing a better naming for this new compatible =20
>> property in the corresponding [PATCH 2/2], so I will resend a v2 of =20
>> this patch.
>>=20
>>=20
>> On 07/01/2013 11:46 AM, hongbo.zhang@freescale.com wrote:
>>> From: Hongbo Zhang <hongbo.zhang@freescale.com>
>>>=20
>>> Freescale QorIQ T4 and B4 introduce new 8-channel DMA engines, this =20
>>> patch add
>>> the device tree nodes for them.
>>>=20
>>> Signed-off-by: Hongbo Zhang <hongbo.zhang@freescale.com>
>>> ---
>>>   arch/powerpc/boot/dts/fsl/qoriq-dma2-0.dtsi |   90 =20
>>> +++++++++++++++++++++++++++
>>>   arch/powerpc/boot/dts/fsl/qoriq-dma2-1.dtsi |   90 =20
>>> +++++++++++++++++++++++++++
>>>   arch/powerpc/boot/dts/fsl/t4240si-post.dtsi |    4 +-
>>>   3 files changed, 182 insertions(+), 2 deletions(-)
>>>   create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-dma2-0.dtsi
>>>   create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-dma2-1.dtsi
> Scott, any comment of these two file names?

There's "dma2" again...

How about elo3-dma-<n>.dtsi?

-Scott=

^ permalink raw reply	[flat|nested] 4+ messages in thread

* [PATCH 1/2] DMA: Freescale: Add new 8-channel DMA engine device tree nodes
@ 2013-07-01  3:20 hongbo.zhang
  0 siblings, 0 replies; 4+ messages in thread
From: hongbo.zhang @ 2013-07-01  3:20 UTC (permalink / raw)
  To: linuxppc-dev; +Cc: scottwood, Hongbo Zhang, linux-kernel, vakul

From: Hongbo Zhang <hongbo.zhang@freescale.com>

Freescale QorIQ T4 and B4 introduce new 8-channel DMA engines, this patch add
the device tree nodes for them.

Signed-off-by: Hongbo Zhang <hongbo.zhang@freescale.com>
---
 arch/powerpc/boot/dts/fsl/qoriq-dma2-0.dtsi |   90 +++++++++++++++++++++++++++
 arch/powerpc/boot/dts/fsl/qoriq-dma2-1.dtsi |   90 +++++++++++++++++++++++++++
 arch/powerpc/boot/dts/fsl/t4240si-post.dtsi |    4 +-
 3 files changed, 182 insertions(+), 2 deletions(-)
 create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-dma2-0.dtsi
 create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-dma2-1.dtsi

diff --git a/arch/powerpc/boot/dts/fsl/qoriq-dma2-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-dma2-0.dtsi
new file mode 100644
index 0000000..c626c49
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-dma2-0.dtsi
@@ -0,0 +1,90 @@
+/*
+ * QorIQ DMA device tree stub [ controller @ offset 0x100000 ]
+ *
+ * Copyright 2011-2013 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+dma0: dma@100300 {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "fsl,eloplus-dma2";
+	reg = <0x100300 0x4 0x100600 0x4>;
+	ranges = <0x0 0x100100 0x500>;
+	cell-index = <0>;
+	dma-channel@0 {
+		compatible = "fsl,eloplus-dma-channel";
+		reg = <0x0 0x80>;
+		cell-index = <0>;
+		interrupts = <28 2 0 0>;
+	};
+	dma-channel@80 {
+		compatible = "fsl,eloplus-dma-channel";
+		reg = <0x80 0x80>;
+		cell-index = <1>;
+		interrupts = <29 2 0 0>;
+	};
+	dma-channel@100 {
+		compatible = "fsl,eloplus-dma-channel";
+		reg = <0x100 0x80>;
+		cell-index = <2>;
+		interrupts = <30 2 0 0>;
+	};
+	dma-channel@180 {
+		compatible = "fsl,eloplus-dma-channel";
+		reg = <0x180 0x80>;
+		cell-index = <3>;
+		interrupts = <31 2 0 0>;
+	};
+	dma-channel@300 {
+		compatible = "fsl,eloplus-dma-channel";
+		reg = <0x300 0x80>;
+		cell-index = <4>;
+		interrupts = <76 2 0 0>;
+	};
+	dma-channel@380 {
+		compatible = "fsl,eloplus-dma-channel";
+		reg = <0x380 0x80>;
+		cell-index = <5>;
+		interrupts = <77 2 0 0>;
+	};
+	dma-channel@400 {
+		compatible = "fsl,eloplus-dma-channel";
+		reg = <0x400 0x80>;
+		cell-index = <6>;
+		interrupts = <78 2 0 0>;
+	};
+	dma-channel@480 {
+		compatible = "fsl,eloplus-dma-channel";
+		reg = <0x480 0x80>;
+		cell-index = <7>;
+		interrupts = <79 2 0 0>;
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-dma2-1.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-dma2-1.dtsi
new file mode 100644
index 0000000..980ea77
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-dma2-1.dtsi
@@ -0,0 +1,90 @@
+/*
+ * QorIQ DMA device tree stub [ controller @ offset 0x101000 ]
+ *
+ * Copyright 2011-2013 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+dma1: dma@101300 {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "fsl,eloplus-dma2";
+	reg = <0x101300 0x4 0x101600 0x4>;
+	ranges = <0x0 0x101100 0x500>;
+	cell-index = <1>;
+	dma-channel@0 {
+		compatible = "fsl,eloplus-dma-channel";
+		reg = <0x0 0x80>;
+		cell-index = <0>;
+		interrupts = <32 2 0 0>;
+	};
+	dma-channel@80 {
+		compatible = "fsl,eloplus-dma-channel";
+		reg = <0x80 0x80>;
+		cell-index = <1>;
+		interrupts = <33 2 0 0>;
+	};
+	dma-channel@100 {
+		compatible = "fsl,eloplus-dma-channel";
+		reg = <0x100 0x80>;
+		cell-index = <2>;
+		interrupts = <34 2 0 0>;
+	};
+	dma-channel@180 {
+		compatible = "fsl,eloplus-dma-channel";
+		reg = <0x180 0x80>;
+		cell-index = <3>;
+		interrupts = <35 2 0 0>;
+	};
+	dma-channel@300 {
+		compatible = "fsl,eloplus-dma-channel";
+		reg = <0x300 0x80>;
+		cell-index = <4>;
+		interrupts = <80 2 0 0>;
+	};
+	dma-channel@380 {
+		compatible = "fsl,eloplus-dma-channel";
+		reg = <0x380 0x80>;
+		cell-index = <5>;
+		interrupts = <81 2 0 0>;
+	};
+	dma-channel@400 {
+		compatible = "fsl,eloplus-dma-channel";
+		reg = <0x400 0x80>;
+		cell-index = <6>;
+		interrupts = <82 2 0 0>;
+	};
+	dma-channel@480 {
+		compatible = "fsl,eloplus-dma-channel";
+		reg = <0x480 0x80>;
+		cell-index = <7>;
+		interrupts = <83 2 0 0>;
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi b/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi
index bd611a9..7d8bac6 100644
--- a/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi
@@ -387,8 +387,8 @@
 		reg	   = <0xea000 0x4000>;
 	};
 
-/include/ "qoriq-dma-0.dtsi"
-/include/ "qoriq-dma-1.dtsi"
+/include/ "qoriq-dma2-0.dtsi"
+/include/ "qoriq-dma2-1.dtsi"
 
 /include/ "qoriq-espi-0.dtsi"
 	spi@110000 {
-- 
1.7.9.5

^ permalink raw reply related	[flat|nested] 4+ messages in thread

end of thread, other threads:[~2013-07-03 19:02 UTC | newest]

Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
     [not found] <1372650378-2936-1-git-send-email-hongbo.zhang@freescale.com>
2013-07-03  3:53 ` [PATCH 1/2] DMA: Freescale: Add new 8-channel DMA engine device tree nodes Hongbo Zhang
2013-07-03  7:48   ` Hongbo Zhang
2013-07-03 19:02     ` Scott Wood
2013-07-01  3:20 hongbo.zhang

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).