* [PATCH] powerpc/CoreNet64: compile with CONFIG_E{5,6}500_CPU well
@ 2013-11-22 2:49 Tiejun Chen
0 siblings, 0 replies; only message in thread
From: Tiejun Chen @ 2013-11-22 2:49 UTC (permalink / raw)
To: scottwood; +Cc: linuxppc-dev
If CONFIG_ALTIVEC is enabled for CoreNet64, and if we also
select CONFIG_E{5,6}500_CPU this may introduce -mcpu=e500mc64
into $CFLAGS. But Altivec option not allowed with e500mc64,
then some compiling errors occur like this:
CC arch/powerpc/lib/xor_vmx.o
arch/powerpc/lib/xor_vmx.c:1:0: error: AltiVec not supported in this target
make[1]: *** [arch/powerpc/lib/xor_vmx.o] Error 1
make: *** [arch/powerpc/lib] Error 2
So we should restrict e500mc64 in altivec scenario.
Signed-off-by: Tiejun Chen <tiejun.chen@windriver.com>
---
arch/powerpc/Makefile | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile
index 607acf5..fd5f6b5 100644
--- a/arch/powerpc/Makefile
+++ b/arch/powerpc/Makefile
@@ -127,7 +127,12 @@ CFLAGS-$(CONFIG_POWER5_CPU) += $(call cc-option,-mcpu=power5)
CFLAGS-$(CONFIG_POWER6_CPU) += $(call cc-option,-mcpu=power6)
CFLAGS-$(CONFIG_POWER7_CPU) += $(call cc-option,-mcpu=power7)
+# Altivec option not allowed with e500mc64 in GCC.
+ifeq ($(CONFIG_ALTIVEC),y)
+E5500_CPU := -mcpu=powerpc64
+else
E5500_CPU := $(call cc-option,-mcpu=e500mc64,-mcpu=powerpc64)
+endif
CFLAGS-$(CONFIG_E5500_CPU) += $(E5500_CPU)
CFLAGS-$(CONFIG_E6500_CPU) += $(call cc-option,-mcpu=e6500,$(E5500_CPU))
--
1.7.9.5
^ permalink raw reply related [flat|nested] only message in thread
only message in thread, other threads:[~2013-11-22 2:49 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2013-11-22 2:49 [PATCH] powerpc/CoreNet64: compile with CONFIG_E{5,6}500_CPU well Tiejun Chen
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).