From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
To: Scott Wood <scottwood@freescale.com>
Cc: linuxppc-dev@lists.ozlabs.org
Subject: Re: Pull request: scottwood/linux.git
Date: Wed, 15 Jan 2014 14:54:24 +1100 [thread overview]
Message-ID: <1389758064.6933.56.camel@pasglop> (raw)
In-Reply-To: <20140111004451.GA7353@home.buserror.net>
On Fri, 2014-01-10 at 18:44 -0600, Scott Wood wrote:
> Highlights include 32-bit booke relocatable support, e6500 hardware
> tablewalk support, various e500 SPE fixes, some new/revived boards, and
> e6500 deeper idle and altivec powerdown modes.
This breaks WSP (A2) build with 64K pages:
/home/benh/linux-powerpc-test/arch/powerpc/mm/tlb_low_64e.S: Assembler messages:
/home/benh/linux-powerpc-test/arch/powerpc/mm/tlb_low_64e.S:334: Error: can't resolve `L0^A' {*ABS* section} - `PUD_SHIFT' {*UND* section}
/home/benh/linux-powerpc-test/arch/powerpc/mm/tlb_low_64e.S:334: Error: expression too complex
/home/benh/linux-powerpc-test/arch/powerpc/mm/tlb_low_64e.S:334: Error: operand out of range (67 is not between 0 and 63)
make[2]: *** [arch/powerpc/mm/tlb_low_64e.o] Error 1
I'm merging anyway because nobody uses WSP anymore (I'm keen to remove it by 3.15 or so)
but in the meantime you may want to fix it (probably just ifdef the PUD level walk on
64k pages, look at what I do elsewhere).
Cheers,
Ben.
> The following changes since commit dece8ada993e1764a115bdff0f1effffaa5fc8dc:
>
> Merge branch 'merge' into next (2013-12-30 15:19:31 +1100)
>
> are available in the git repository at:
>
>
> git://git.kernel.org/pub/scm/linux/kernel/git/scottwood/linux.git next
>
> for you to fetch changes up to d064f30e5063ec54ab50af08c64fb5055e759bfd:
>
> powerpc/fsl_pci: add versionless pci compatible (2014-01-10 17:38:56 -0600)
>
> ----------------------------------------------------------------
> Anton Blanchard (1):
> drivers/tty: ehv_bytechan fails to build as a module
>
> Christian Engelmayer (1):
> powerpc/sysdev: Fix a pci section mismatch for Book E
>
> Diana Craciun (1):
> powerpc: Replaced tlbilx with tlbwe in the initialization code
>
> Joseph Myers (6):
> powerpc: fix exception clearing in e500 SPE float emulation
> powerpc: fix e500 SPE float rounding inexactness detection
> math-emu: fix floating-point to integer unsigned saturation
> math-emu: fix floating-point to integer overflow detection
> powerpc: fix e500 SPE float to integer and fixed-point conversions
> powerpc: fix e500 SPE float SIGFPE generation
>
> Kevin Hao (11):
> powerpc/85xx: don't init the mpic ipi for the SoC which has doorbell support
> powerpc/fsl_booke: protect the access to MAS7
> powerpc/fsl_booke: introduce get_phys_addr function
> powerpc: introduce macro LOAD_REG_ADDR_PIC
> powerpc: enable the relocatable support for the fsl booke 32bit kernel
> powerpc/fsl_booke: set the tlb entry for the kernel address in AS1
> powerpc: introduce early_get_first_memblock_info
> powerpc/fsl_booke: introduce map_mem_in_cams_addr
> powerpc/fsl_booke: make sure PAGE_OFFSET map to memstart_addr for relocatable kernel
> powerpc/fsl_booke: smp support for booting a relocatable kernel above 64M
> powerpc/fsl_booke: enable the relocatable for the kdump kernel
>
> LEROY Christophe (1):
> powerpc 8xx: defconfig: slice by 4 is more efficient than the default slice by 8 on Powerpc 8xx.
>
> Lijun Pan (1):
> powerpc/85xx: Merge 85xx/p1023_defconfig into mpc85xx_smp and mpc85xx
>
> Mihai Caraman (1):
> powerpc/booke64: Add LRAT error exception handler
>
> Paul Gortmaker (1):
> powerpc: fix 8xx and 6xx final link failures
>
> Scott Wood (5):
> powerpc/fsl-booke: Use SPRN_SPRGn rather than mfsprg/mtsprg
> powerpc: add barrier after writing kernel PTE
> powerpc/e6500: TLB miss handler with hardware tablewalk support
> powerpc/fsl-book3e-64: Use paca for hugetlb TLB1 entry selection
> powerpc/booke-64: fix tlbsrx. path in bolted tlb handler
>
> Shaohui Xie (1):
> powerpc/85xx: handle the eLBC error interrupt if it exists in dts
>
> Shengzhou Liu (2):
> powerpc/85xx/dts: add third elo3 dma component
> powerpc/fsl_pci: add versionless pci compatible
>
> Stephen Chivers (1):
> powerpc/embedded6xx: Add support for Motorola/Emerson MVME5100
>
> Wang Dongsheng (9):
> powerpc/fsl: add E6500 PVR and SPRN_PWRMGTCR0 define
> powerpc/85xx: add hardware automatically enter altivec idle state
> powerpc/85xx: add hardware automatically enter pw20 state
> powerpc/85xx: add sysfs for pw20 state and altivec idle
> powerpc/p1022ds: fix rtc compatible string
> powerpc/p1022ds: add a interrupt for rtc node
> powerpc/mpic_timer: fix the time is not accurate caused by GTCRR toggle bit
> powerpc/mpic_timer: fix convert ticks to time subtraction overflow
> powerpc/dts: fix lbc lack of error interrupt
>
> Xie Xiaobo (2):
> powerpc/85xx: Add QE common init function
> powerpc/85xx: Add TWR-P1025 board support
>
> Zhao Qiang (3):
> powerpc/p1010rdb:update dts to adapt to both old and new p1010rdb
> powerpc/p1010rdb:update mtd of nand to adapt to both old and new p1010rdb
> powerpc/p1010rdb-pa: modify phy interrupt.
>
> .../devicetree/bindings/video/ssd1289fb.txt | 13 +
> arch/powerpc/Kconfig | 5 +-
> arch/powerpc/boot/Makefile | 7 +-
> arch/powerpc/boot/dts/fsl/elo3-dma-2.dtsi | 82 ++++++
> arch/powerpc/boot/dts/fsl/p1020si-post.dtsi | 3 +-
> arch/powerpc/boot/dts/fsl/p1021si-post.dtsi | 3 +-
> arch/powerpc/boot/dts/fsl/p1022si-post.dtsi | 3 +-
> arch/powerpc/boot/dts/fsl/p1023si-post.dtsi | 3 +-
> arch/powerpc/boot/dts/mvme5100.dts | 185 ++++++++++++
> arch/powerpc/boot/dts/p1010rdb-pa.dts | 23 ++
> arch/powerpc/boot/dts/p1010rdb-pa.dtsi | 85 ++++++
> .../dts/{p1010rdb_36b.dts => p1010rdb-pa_36b.dts} | 47 +--
> arch/powerpc/boot/dts/p1010rdb-pb.dts | 35 +++
> arch/powerpc/boot/dts/p1010rdb-pb_36b.dts | 58 ++++
> arch/powerpc/boot/dts/p1010rdb.dts | 66 -----
> arch/powerpc/boot/dts/p1010rdb.dtsi | 43 +--
> arch/powerpc/boot/dts/p1010rdb_32b.dtsi | 79 ++++++
> arch/powerpc/boot/dts/p1010rdb_36b.dtsi | 79 ++++++
> arch/powerpc/boot/dts/p1022ds.dtsi | 3 +-
> arch/powerpc/boot/dts/p1025twr.dts | 95 +++++++
> arch/powerpc/boot/dts/p1025twr.dtsi | 280 ++++++++++++++++++
> arch/powerpc/boot/mvme5100.c | 27 ++
> arch/powerpc/boot/wrapper | 4 +
> arch/powerpc/configs/85xx/p1023_defconfig | 188 ------------
> arch/powerpc/configs/adder875_defconfig | 1 +
> arch/powerpc/configs/ep88xc_defconfig | 1 +
> arch/powerpc/configs/mpc85xx_defconfig | 3 +
> arch/powerpc/configs/mpc85xx_smp_defconfig | 3 +
> arch/powerpc/configs/mpc866_ads_defconfig | 1 +
> arch/powerpc/configs/mpc885_ads_defconfig | 1 +
> arch/powerpc/configs/mvme5100_defconfig | 144 ++++++++++
> arch/powerpc/configs/tqm8xx_defconfig | 1 +
> arch/powerpc/include/asm/fsl_lbc.h | 2 +-
> arch/powerpc/include/asm/kvm_asm.h | 1 +
> arch/powerpc/include/asm/mmu-book3e.h | 13 +
> arch/powerpc/include/asm/mmu.h | 21 +-
> arch/powerpc/include/asm/paca.h | 6 +
> arch/powerpc/include/asm/ppc_asm.h | 13 +
> arch/powerpc/include/asm/processor.h | 6 +-
> arch/powerpc/include/asm/reg.h | 2 +
> arch/powerpc/include/asm/reg_booke.h | 10 +
> arch/powerpc/kernel/asm-offsets.c | 9 +
> arch/powerpc/kernel/cpu_setup_fsl_booke.S | 54 ++++
> arch/powerpc/kernel/exceptions-64e.S | 27 +-
> arch/powerpc/kernel/fsl_booke_entry_mapping.S | 2 +
> arch/powerpc/kernel/head_fsl_booke.S | 266 +++++++++++++++--
> arch/powerpc/kernel/paca.c | 5 +
> arch/powerpc/kernel/process.c | 30 +-
> arch/powerpc/kernel/prom.c | 41 ++-
> arch/powerpc/kernel/setup_64.c | 31 ++
> arch/powerpc/kernel/swsusp_booke.S | 32 +--
> arch/powerpc/kernel/sysfs.c | 316 +++++++++++++++++++++
> arch/powerpc/kvm/bookehv_interrupts.S | 2 +
> arch/powerpc/math-emu/math_efp.c | 316 ++++++++++++++++-----
> arch/powerpc/mm/fsl_booke_mmu.c | 80 +++++-
> arch/powerpc/mm/hugetlbpage-book3e.c | 54 +++-
> arch/powerpc/mm/mem.c | 6 +
> arch/powerpc/mm/mmu_decl.h | 2 +
> arch/powerpc/mm/pgtable_32.c | 1 +
> arch/powerpc/mm/pgtable_64.c | 12 +
> arch/powerpc/mm/tlb_low_64e.S | 174 +++++++++++-
> arch/powerpc/mm/tlb_nohash.c | 93 ++++--
> arch/powerpc/mm/tlb_nohash_low.S | 4 +-
> arch/powerpc/platforms/85xx/Kconfig | 6 +
> arch/powerpc/platforms/85xx/Makefile | 1 +
> arch/powerpc/platforms/85xx/common.c | 38 +++
> arch/powerpc/platforms/85xx/mpc85xx.h | 6 +
> arch/powerpc/platforms/85xx/mpc85xx_mds.c | 29 +-
> arch/powerpc/platforms/85xx/mpc85xx_rdb.c | 25 +-
> arch/powerpc/platforms/85xx/smp.c | 17 +-
> arch/powerpc/platforms/85xx/twr_p102x.c | 147 ++++++++++
> arch/powerpc/platforms/embedded6xx/Kconfig | 13 +-
> arch/powerpc/platforms/embedded6xx/Makefile | 1 +
> arch/powerpc/platforms/embedded6xx/mvme5100.c | 221 ++++++++++++++
> arch/powerpc/sysdev/fsl_lbc.c | 31 +-
> arch/powerpc/sysdev/fsl_pci.c | 3 +-
> arch/powerpc/sysdev/indirect_pci.c | 6 +-
> arch/powerpc/sysdev/mpic_timer.c | 10 +-
> drivers/tty/Kconfig | 2 +-
> include/linux/of_fdt.h | 1 +
> include/math-emu/op-common.h | 9 +-
> 81 files changed, 3154 insertions(+), 614 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/video/ssd1289fb.txt
> create mode 100644 arch/powerpc/boot/dts/fsl/elo3-dma-2.dtsi
> create mode 100644 arch/powerpc/boot/dts/mvme5100.dts
> create mode 100644 arch/powerpc/boot/dts/p1010rdb-pa.dts
> create mode 100644 arch/powerpc/boot/dts/p1010rdb-pa.dtsi
> rename arch/powerpc/boot/dts/{p1010rdb_36b.dts => p1010rdb-pa_36b.dts} (64%)
> create mode 100644 arch/powerpc/boot/dts/p1010rdb-pb.dts
> create mode 100644 arch/powerpc/boot/dts/p1010rdb-pb_36b.dts
> delete mode 100644 arch/powerpc/boot/dts/p1010rdb.dts
> create mode 100644 arch/powerpc/boot/dts/p1010rdb_32b.dtsi
> create mode 100644 arch/powerpc/boot/dts/p1010rdb_36b.dtsi
> create mode 100644 arch/powerpc/boot/dts/p1025twr.dts
> create mode 100644 arch/powerpc/boot/dts/p1025twr.dtsi
> create mode 100644 arch/powerpc/boot/mvme5100.c
> delete mode 100644 arch/powerpc/configs/85xx/p1023_defconfig
> create mode 100644 arch/powerpc/configs/mvme5100_defconfig
> create mode 100644 arch/powerpc/platforms/85xx/twr_p102x.c
> create mode 100644 arch/powerpc/platforms/embedded6xx/mvme5100.c
next prev parent reply other threads:[~2014-01-15 3:54 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-01-11 0:44 Pull request: scottwood/linux.git Scott Wood
2014-01-15 3:54 ` Benjamin Herrenschmidt [this message]
2014-01-17 23:00 ` Scott Wood
-- strict thread matches above, loose matches on Subject: below --
2014-05-23 21:21 Scott Wood
2014-01-18 1:22 Scott Wood
2014-01-28 6:20 ` Anatolij Gustschin
2013-11-22 23:21 Scott Wood
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1389758064.6933.56.camel@pasglop \
--to=benh@kernel.crashing.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=scottwood@freescale.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).