linuxppc-dev.lists.ozlabs.org archive mirror
 help / color / mirror / Atom feed
* [PATCH v4 00/28] powerpc/iommu/vfio: Enable Dynamic DMA windows
@ 2015-02-16 10:05 Alexey Kardashevskiy
  2015-02-16 10:05 ` [PATCH v4 01/28] vfio: powerpc/spapr: Move page pinning from arch code to VFIO IOMMU driver Alexey Kardashevskiy
                   ` (27 more replies)
  0 siblings, 28 replies; 30+ messages in thread
From: Alexey Kardashevskiy @ 2015-02-16 10:05 UTC (permalink / raw)
  To: linuxppc-dev
  Cc: Alexey Kardashevskiy, Gavin Shan, Alexander Graf,
	Alex Williamson, Paul Mackerras, linux-kernel


This enables PAPR defined feature called Dynamic DMA windows (DDW).

Each Partitionable Endpoint (IOMMU group) has a separate DMA window on
a PCI bus where devices are allows to perform DMA. By default there is
1 or 2GB window allocated at the host boot time and these windows are
used when an IOMMU group is passed to the userspace (guest). These windows
are mapped at zero offset on a PCI bus.

Hi-speed devices may suffer from limited size of this window. On the host
side a TCE bypass mode is enabled on POWER8 CPU which implements
direct mapping of the host memory to a PCI bus at 1<<59.

For the guest, PAPR defines a DDW RTAS API which allows the pseries guest
to query the hypervisor if it supports DDW and what are the parameters
of possible windows.

Currently POWER8 supports 2 DMA windows per PE - already mentioned and used
small 32bit window and 64bit window which can only start from 1<<59 and
can support various page sizes.

This patchset reworks PPC IOMMU code and adds necessary structures
to extend it to support big windows.

When the guest detectes the feature and the PE is capable of 64bit DMA,
it does:
1. query to hypervisor about number of available windows and page masks;
2. creates a window with the biggest possible page size (current guests can do
64K or 16MB TCEs);
3. maps the entire guest RAM via H_PUT_TCE* hypercalls
4. switches dma_ops to direct_dma_ops on the selected PE.

Once this is done, H_PUT_TCE is not called anymore and the guest gets
maximum performance.

Changes:
v4:
* moved patches around to have VFIO and PPC patches separated as much as
possible; once I get Ack from any PPC maintainer about the whole approach,
I'll start posting these in small chunks per maintainer
* now works with the existing upstream QEMU

v3:
* redesigned the whole thing
* multiple IOMMU groups per PHB -> one PHB is needed for VFIO in the guest ->
no problems with locked_vm counting; also we save memory on actual tables
* guest RAM preregistration is required for DDW
* PEs (IOMMU groups) are passed to VFIO with no DMA windows at all so
we do not bother with iommu_table::it_map anymore
* added multilevel TCE tables support to support really huge guests

v2:
* added missing __pa() in "powerpc/powernv: Release replaced TCE"
* reposted to make some noise




Alexey Kardashevskiy (28):
  vfio: powerpc/spapr: Move page pinning from arch code to VFIO IOMMU
    driver
  vfio: powerpc/spapr: Do cleanup when releasing the group
  vfio: powerpc/spapr: Check that TCE page size is equal to it_page_size
  vfio: powerpc/spapr: Use it_page_size
  vfio: powerpc/spapr: Move locked_vm accounting to helpers
  vfio: powerpc/spapr: Disable DMA mappings on disabled container
  vfio: powerpc/spapr: Moving pinning/unpinning to helpers
  vfio: powerpc/spapr: Register memory
  powerpc/powernv: Do not set "read" flag if direction==DMA_NONE
  powerpc/iommu: Move tce_xxx callbacks from ppc_md to iommu_table
  powerpc/iommu: Introduce iommu_table_alloc() helper
  powerpc/spapr: vfio: Switch from iommu_table to new powerpc_iommu
  powerpc/iommu: Fix IOMMU ownership control functions
  vfio: powerpc/spapr: powerpc/powernv/ioda2: Rework IOMMU ownership
    control
  powerpc/powernv/ioda/ioda2: Rework tce_build()/tce_free()
  powerpc/iommu/powernv: Release replaced TCE
  powerpc/pseries/lpar: Enable VFIO
  poweppc/powernv/ioda2: Rework iommu_table creation
  powerpc/powernv/ioda2: Introduce pnv_pci_ioda2_create_table
  powerpc/powernv/ioda2: Introduce pnv_pci_ioda2_set_window
  powerpc/iommu: Split iommu_free_table into 2 helpers
  powerpc/powernv: Implement multilevel TCE tables
  powerpc/powernv: Change prototypes to receive iommu
  powerpc/powernv/ioda: Define and implement DMA table/window management
    callbacks
  vfio: powerpc/spapr: powerpc/powernv/ioda2: Rework ownership
  vfio: powerpc/spapr: Rework an IOMMU group attach/detach
  vfio: powerpc/spapr: Register memory
  vfio: powerpc/spapr: Support Dynamic DMA windows

 Documentation/vfio.txt                      |  25 +
 arch/powerpc/include/asm/iommu.h            | 109 +++-
 arch/powerpc/include/asm/machdep.h          |  25 -
 arch/powerpc/kernel/eeh.c                   |   2 +-
 arch/powerpc/kernel/iommu.c                 | 322 +++++-----
 arch/powerpc/kernel/vio.c                   |   5 +
 arch/powerpc/platforms/cell/iommu.c         |   8 +-
 arch/powerpc/platforms/pasemi/iommu.c       |   7 +-
 arch/powerpc/platforms/powernv/pci-ioda.c   | 473 +++++++++++---
 arch/powerpc/platforms/powernv/pci-p5ioc2.c |  21 +-
 arch/powerpc/platforms/powernv/pci.c        | 130 ++--
 arch/powerpc/platforms/powernv/pci.h        |  14 +-
 arch/powerpc/platforms/pseries/iommu.c      |  99 ++-
 arch/powerpc/sysdev/dart_iommu.c            |  12 +-
 drivers/vfio/vfio_iommu_spapr_tce.c         | 944 +++++++++++++++++++++++++---
 include/uapi/linux/vfio.h                   |  49 +-
 16 files changed, 1756 insertions(+), 489 deletions(-)

-- 
2.0.0

^ permalink raw reply	[flat|nested] 30+ messages in thread

end of thread, other threads:[~2015-02-20  2:18 UTC | newest]

Thread overview: 30+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2015-02-16 10:05 [PATCH v4 00/28] powerpc/iommu/vfio: Enable Dynamic DMA windows Alexey Kardashevskiy
2015-02-16 10:05 ` [PATCH v4 01/28] vfio: powerpc/spapr: Move page pinning from arch code to VFIO IOMMU driver Alexey Kardashevskiy
2015-02-16 10:05 ` [PATCH v4 02/28] vfio: powerpc/spapr: Do cleanup when releasing the group Alexey Kardashevskiy
2015-02-16 10:05 ` [PATCH v4 03/28] vfio: powerpc/spapr: Check that TCE page size is equal to it_page_size Alexey Kardashevskiy
2015-02-16 10:05 ` [PATCH v4 04/28] vfio: powerpc/spapr: Use it_page_size Alexey Kardashevskiy
2015-02-16 10:05 ` [PATCH v4 05/28] vfio: powerpc/spapr: Move locked_vm accounting to helpers Alexey Kardashevskiy
2015-02-16 10:05 ` [PATCH v4 06/28] vfio: powerpc/spapr: Disable DMA mappings on disabled container Alexey Kardashevskiy
2015-02-16 10:05 ` [PATCH v4 07/28] vfio: powerpc/spapr: Moving pinning/unpinning to helpers Alexey Kardashevskiy
2015-02-16 10:06 ` [PATCH v4 08/28] vfio: powerpc/spapr: Register memory Alexey Kardashevskiy
2015-02-16 10:06 ` [PATCH v4 09/28] powerpc/powernv: Do not set "read" flag if direction==DMA_NONE Alexey Kardashevskiy
2015-02-16 10:06 ` [PATCH v4 10/28] powerpc/iommu: Move tce_xxx callbacks from ppc_md to iommu_table Alexey Kardashevskiy
2015-02-16 10:06 ` [PATCH v4 11/28] powerpc/iommu: Introduce iommu_table_alloc() helper Alexey Kardashevskiy
2015-02-16 10:06 ` [PATCH v4 12/28] powerpc/spapr: vfio: Switch from iommu_table to new powerpc_iommu Alexey Kardashevskiy
2015-02-16 10:06 ` [PATCH v4 13/28] powerpc/iommu: Fix IOMMU ownership control functions Alexey Kardashevskiy
2015-02-16 10:06 ` [PATCH v4 14/28] vfio: powerpc/spapr: powerpc/powernv/ioda2: Rework IOMMU ownership control Alexey Kardashevskiy
2015-02-16 10:06 ` [PATCH v4 15/28] powerpc/powernv/ioda/ioda2: Rework tce_build()/tce_free() Alexey Kardashevskiy
2015-02-16 10:06 ` [PATCH v4 16/28] powerpc/iommu/powernv: Release replaced TCE Alexey Kardashevskiy
2015-02-16 10:06 ` [PATCH v4 17/28] powerpc/pseries/lpar: Enable VFIO Alexey Kardashevskiy
2015-02-16 10:06 ` [PATCH v4 18/28] poweppc/powernv/ioda2: Rework iommu_table creation Alexey Kardashevskiy
2015-02-16 10:06 ` [PATCH v4 19/28] powerpc/powernv/ioda2: Introduce pnv_pci_ioda2_create_table Alexey Kardashevskiy
2015-02-16 10:06 ` [PATCH v4 20/28] powerpc/powernv/ioda2: Introduce pnv_pci_ioda2_set_window Alexey Kardashevskiy
2015-02-16 10:06 ` [PATCH v4 21/28] powerpc/iommu: Split iommu_free_table into 2 helpers Alexey Kardashevskiy
2015-02-16 10:06 ` [PATCH v4 22/28] powerpc/powernv: Implement multilevel TCE tables Alexey Kardashevskiy
2015-02-16 10:06 ` [PATCH v4 23/28] powerpc/powernv: Change prototypes to receive iommu Alexey Kardashevskiy
2015-02-16 10:06 ` [PATCH v4 24/28] powerpc/powernv/ioda: Define and implement DMA table/window management callbacks Alexey Kardashevskiy
2015-02-16 10:06 ` [PATCH v4 25/28] vfio: powerpc/spapr: powerpc/powernv/ioda2: Rework ownership Alexey Kardashevskiy
2015-02-16 10:06 ` [PATCH v4 26/28] vfio: powerpc/spapr: Rework an IOMMU group attach/detach Alexey Kardashevskiy
2015-02-16 10:06 ` [PATCH v4 27/28] vfio: powerpc/spapr: Register memory Alexey Kardashevskiy
2015-02-20  2:18   ` Alexey Kardashevskiy
2015-02-16 10:06 ` [PATCH v4 28/28] vfio: powerpc/spapr: Support Dynamic DMA windows Alexey Kardashevskiy

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).