From: Madalin Bucur <madalin.bucur@freescale.com>
To: <netdev@vger.kernel.org>
Cc: <linuxppc-dev@lists.ozlabs.org>, <linux-kernel@vger.kernel.org>,
<scottwood@freescale.com>, <igal.liberman@freescale.com>,
<ppc@mindchasers.com>, <joe@perches.com>, <pebolle@tiscali.nl>,
<joakim.tjernlund@transmode.se>,
Madalin Bucur <madalin.bucur@freescale.com>
Subject: [PATCH 07/10] dpaa_eth: add sysfs exports
Date: Wed, 22 Jul 2015 19:16:43 +0300 [thread overview]
Message-ID: <1437581806-17420-7-git-send-email-madalin.bucur@freescale.com> (raw)
In-Reply-To: <1437581806-17420-6-git-send-email-madalin.bucur@freescale.com>
Export Frame Queue and Buffer Pool IDs through sysfs.
Signed-off-by: Madalin Bucur <madalin.bucur@freescale.com>
---
drivers/net/ethernet/freescale/dpaa/Makefile | 2 +-
drivers/net/ethernet/freescale/dpaa/dpaa_eth.c | 2 +
drivers/net/ethernet/freescale/dpaa/dpaa_eth.h | 3 +
.../net/ethernet/freescale/dpaa/dpaa_eth_common.c | 2 +
.../net/ethernet/freescale/dpaa/dpaa_eth_sysfs.c | 167 +++++++++++++++++++++
5 files changed, 175 insertions(+), 1 deletion(-)
create mode 100644 drivers/net/ethernet/freescale/dpaa/dpaa_eth_sysfs.c
diff --git a/drivers/net/ethernet/freescale/dpaa/Makefile b/drivers/net/ethernet/freescale/dpaa/Makefile
index e137146..3a276d5 100644
--- a/drivers/net/ethernet/freescale/dpaa/Makefile
+++ b/drivers/net/ethernet/freescale/dpaa/Makefile
@@ -10,4 +10,4 @@ ccflags-y += -I$(FMAN)/flib
obj-$(CONFIG_FSL_DPAA_ETH) += fsl_dpa.o
-fsl_dpa-objs += dpaa_eth.o dpaa_eth_sg.o dpaa_eth_common.o dpaa_ethtool.o
+fsl_dpa-objs += dpaa_eth.o dpaa_eth_sg.o dpaa_eth_common.o dpaa_ethtool.o dpaa_eth_sysfs.o
diff --git a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
index 3fbd114..dbd8a70 100644
--- a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
+++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
@@ -740,6 +740,8 @@ dpaa_eth_priv_probe(struct platform_device *pdev)
if (err < 0)
goto netdev_init_failed;
+ dpaa_eth_sysfs_init(&net_dev->dev);
+
pr_info("Probed interface %s\n", net_dev->name);
return 0;
diff --git a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.h b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.h
index cbe9626..7160eda 100644
--- a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.h
+++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.h
@@ -346,6 +346,9 @@ static inline u16 dpa_get_headroom(struct dpa_buffer_layout_s *bl)
return bl->data_align ? ALIGN(headroom, bl->data_align) : headroom;
}
+void dpaa_eth_sysfs_remove(struct device *dev);
+void dpaa_eth_sysfs_init(struct device *dev);
+
void dpa_private_napi_del(struct net_device *net_dev);
static inline void clear_fd(struct qm_fd *fd)
diff --git a/drivers/net/ethernet/freescale/dpaa/dpaa_eth_common.c b/drivers/net/ethernet/freescale/dpaa/dpaa_eth_common.c
index aeb2baf..bcd4c4f 100644
--- a/drivers/net/ethernet/freescale/dpaa/dpaa_eth_common.c
+++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth_common.c
@@ -285,6 +285,8 @@ int dpa_remove(struct platform_device *pdev)
priv = netdev_priv(net_dev);
+ dpaa_eth_sysfs_remove(dev);
+
dev_set_drvdata(dev, NULL);
unregister_netdev(net_dev);
diff --git a/drivers/net/ethernet/freescale/dpaa/dpaa_eth_sysfs.c b/drivers/net/ethernet/freescale/dpaa/dpaa_eth_sysfs.c
new file mode 100644
index 0000000..a6c71b1
--- /dev/null
+++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth_sysfs.c
@@ -0,0 +1,167 @@
+/* Copyright 2008-2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kthread.h>
+#include <linux/io.h>
+#include <linux/of_net.h>
+#include "dpaa_eth.h"
+#include "mac.h"
+
+static ssize_t dpaa_eth_show_addr(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct dpa_priv_s *priv = netdev_priv(to_net_dev(dev));
+ struct mac_device *mac_dev = priv->mac_dev;
+
+ if (mac_dev)
+ return sprintf(buf, "%llx",
+ (unsigned long long)mac_dev->res->start);
+ else
+ return sprintf(buf, "none");
+}
+
+static ssize_t dpaa_eth_show_fqids(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct dpa_priv_s *priv = netdev_priv(to_net_dev(dev));
+ ssize_t bytes = 0;
+ int i = 0;
+ char *str;
+ struct dpa_fq *fq;
+ struct dpa_fq *tmp;
+ struct dpa_fq *prev = NULL;
+ u32 first_fqid = 0;
+ u32 last_fqid = 0;
+ char *prevstr = NULL;
+
+ list_for_each_entry_safe(fq, tmp, &priv->dpa_fq_list, list) {
+ switch (fq->fq_type) {
+ case FQ_TYPE_RX_DEFAULT:
+ str = "Rx default";
+ break;
+ case FQ_TYPE_RX_ERROR:
+ str = "Rx error";
+ break;
+ case FQ_TYPE_TX_CONFIRM:
+ str = "Tx default confirmation";
+ break;
+ case FQ_TYPE_TX_CONF_MQ:
+ str = "Tx confirmation (mq)";
+ break;
+ case FQ_TYPE_TX_ERROR:
+ str = "Tx error";
+ break;
+ case FQ_TYPE_TX:
+ str = "Tx";
+ break;
+ default:
+ str = "Unknown";
+ }
+
+ if (prev && (abs(fq->fqid - prev->fqid) != 1 ||
+ str != prevstr)) {
+ if (last_fqid == first_fqid)
+ bytes += sprintf(buf + bytes,
+ "%s: %d\n", prevstr, prev->fqid);
+ else
+ bytes += sprintf(buf + bytes,
+ "%s: %d - %d\n", prevstr,
+ first_fqid, last_fqid);
+ }
+
+ if (prev && abs(fq->fqid - prev->fqid) == 1 &&
+ str == prevstr) {
+ last_fqid = fq->fqid;
+ } else {
+ first_fqid = fq->fqid;
+ last_fqid = fq->fqid;
+ }
+
+ prev = fq;
+ prevstr = str;
+ i++;
+ }
+
+ if (prev) {
+ if (last_fqid == first_fqid)
+ bytes += sprintf(buf + bytes, "%s: %d\n", prevstr,
+ prev->fqid);
+ else
+ bytes += sprintf(buf + bytes, "%s: %d - %d\n", prevstr,
+ first_fqid, last_fqid);
+ }
+
+ return bytes;
+}
+
+static ssize_t dpaa_eth_show_bpids(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ ssize_t bytes = 0;
+ struct dpa_priv_s *priv = netdev_priv(to_net_dev(dev));
+ struct dpa_bp *dpa_bp = priv->dpa_bp;
+ int i = 0;
+
+ for (i = 0; i < priv->bp_count; i++)
+ bytes += snprintf(buf + bytes, PAGE_SIZE - bytes, "%u\n",
+ dpa_bp[i].bpid);
+
+ return bytes;
+}
+
+static struct device_attribute dpaa_eth_attrs[] = {
+ __ATTR(device_addr, S_IRUGO, dpaa_eth_show_addr, NULL),
+ __ATTR(fqids, S_IRUGO, dpaa_eth_show_fqids, NULL),
+ __ATTR(bpids, S_IRUGO, dpaa_eth_show_bpids, NULL),
+};
+
+void dpaa_eth_sysfs_init(struct device *dev)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(dpaa_eth_attrs); i++)
+ if (device_create_file(dev, &dpaa_eth_attrs[i])) {
+ dev_err(dev, "Error creating sysfs file\n");
+ while (i > 0)
+ device_remove_file(dev, &dpaa_eth_attrs[--i]);
+ return;
+ }
+}
+
+void dpaa_eth_sysfs_remove(struct device *dev)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(dpaa_eth_attrs); i++)
+ device_remove_file(dev, &dpaa_eth_attrs[i]);
+}
--
1.7.11.7
next prev parent reply other threads:[~2015-07-22 16:18 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-07-22 16:16 [PATCH 01/10] devres: add devm_alloc_percpu() Madalin Bucur
2015-07-22 16:16 ` [PATCH 02/10] dpaa_eth: add support for DPAA Ethernet Madalin Bucur
2015-07-22 16:16 ` [PATCH 03/10] dpaa_eth: add configurable bpool thresholds Madalin Bucur
2015-07-22 16:16 ` [PATCH 04/10] dpaa_eth: add support for S/G frames Madalin Bucur
2015-07-22 16:16 ` [PATCH 05/10] dpaa_eth: add driver's Tx queue selection mechanism Madalin Bucur
2015-07-22 16:16 ` [PATCH 06/10] dpaa_eth: add ethtool functionality Madalin Bucur
2015-07-22 16:16 ` Madalin Bucur [this message]
2015-07-22 16:16 ` [PATCH 08/10] dpaa_eth: add debugfs counters Madalin Bucur
2015-07-22 16:16 ` [PATCH 09/10] dpaa_eth: add debugfs entries Madalin Bucur
2015-07-22 16:16 ` [PATCH 10/10] dpaa_eth: add trace points Madalin Bucur
2015-07-22 17:47 ` [PATCH 03/10] dpaa_eth: add configurable bpool thresholds Joe Perches
2015-07-24 15:49 ` Madalin-Cristian Bucur
2015-07-26 23:35 ` David Miller
2015-07-27 12:54 ` Madalin-Cristian Bucur
2015-07-22 17:37 ` [PATCH 02/10] dpaa_eth: add support for DPAA Ethernet Joe Perches
2015-07-24 15:45 ` Madalin-Cristian Bucur
2015-07-27 18:59 ` Scott Wood
2015-07-29 14:15 ` Joakim Tjernlund
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1437581806-17420-7-git-send-email-madalin.bucur@freescale.com \
--to=madalin.bucur@freescale.com \
--cc=igal.liberman@freescale.com \
--cc=joakim.tjernlund@transmode.se \
--cc=joe@perches.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=netdev@vger.kernel.org \
--cc=pebolle@tiscali.nl \
--cc=ppc@mindchasers.com \
--cc=scottwood@freescale.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).