linuxppc-dev.lists.ozlabs.org archive mirror
 help / color / mirror / Atom feed
From: Gavin Shan <gwshan@linux.vnet.ibm.com>
To: linuxppc-dev@lists.ozlabs.org
Cc: linux-pci@vger.kernel.org, devicetree@vger.kernel.org,
	benh@kernel.crashing.org, mpe@ellerman.id.au, aik@ozlabs.ru,
	bhelgaas@google.com, robherring2@gmail.com, dja@axtens.net,
	alistair@popple.id.au, Gavin Shan <gwshan@linux.vnet.ibm.com>
Subject: [PATCH v9 12/22] powerpc/pci: Delay populating pdn
Date: Tue,  3 May 2016 23:22:43 +1000	[thread overview]
Message-ID: <1462281773-26438-13-git-send-email-gwshan@linux.vnet.ibm.com> (raw)
In-Reply-To: <1462281773-26438-1-git-send-email-gwshan@linux.vnet.ibm.com>

The pdn (struct pci_dn) instances are allocated from memblock or
bootmem when creating PCI controller (hoses) in setup_arch(). PCI
hotplug, which will be supported by proceeding patches, releases
PCI device nodes and their corresponding pdn on unplugging event.
The memory chunks for pdn instances allocated from memblock or
bootmem are hard to reused after being released.

This delays creating pdn by pci_devs_phb_init() from setup_arch()
to core_initcall() so that they are allocated from slab. The memory
consumed by pdn can be released to system without problem during
PCI unplugging time. It indicates that pci_dn is unavailable in
setup_arch() and the the fixup on pdn (like AGP's) can't be carried
out that time. We have to do that in pcibios_root_bridge_prepare()
on maple/pasemi/powermac platforms where/when the pdn is available.
pcibios_root_bridge_prepare is called from subsys_initcall() which
is executed after core_initcall() so the code flow does not change.

At the mean while, the EEH device is created when pdn is populated,
meaning pdn and EEH device have same life cycle. In turn, we needn't
call eeh_dev_init() to create EEH device explicitly.

Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
---
 arch/powerpc/include/asm/eeh.h         |  2 +-
 arch/powerpc/include/asm/ppc-pci.h     |  2 --
 arch/powerpc/kernel/eeh_dev.c          | 17 +++------------
 arch/powerpc/kernel/pci_dn.c           | 23 ++++++++++++++++----
 arch/powerpc/platforms/maple/pci.c     | 34 ++++++++++++++++++------------
 arch/powerpc/platforms/pasemi/pci.c    |  3 ---
 arch/powerpc/platforms/powermac/pci.c  | 38 +++++++++++++++++++++-------------
 arch/powerpc/platforms/powernv/pci.c   |  3 ---
 arch/powerpc/platforms/pseries/setup.c |  6 +-----
 9 files changed, 69 insertions(+), 59 deletions(-)

diff --git a/arch/powerpc/include/asm/eeh.h b/arch/powerpc/include/asm/eeh.h
index fb9f376..8721580 100644
--- a/arch/powerpc/include/asm/eeh.h
+++ b/arch/powerpc/include/asm/eeh.h
@@ -274,7 +274,7 @@ void eeh_pe_restore_bars(struct eeh_pe *pe);
 const char *eeh_pe_loc_get(struct eeh_pe *pe);
 struct pci_bus *eeh_pe_bus_get(struct eeh_pe *pe);
 
-void *eeh_dev_init(struct pci_dn *pdn, void *data);
+struct eeh_dev *eeh_dev_init(struct pci_dn *pdn);
 void eeh_dev_phb_init_dynamic(struct pci_controller *phb);
 int eeh_init(void);
 int __init eeh_ops_register(struct eeh_ops *ops);
diff --git a/arch/powerpc/include/asm/ppc-pci.h b/arch/powerpc/include/asm/ppc-pci.h
index 8753e4e..0f73de0 100644
--- a/arch/powerpc/include/asm/ppc-pci.h
+++ b/arch/powerpc/include/asm/ppc-pci.h
@@ -39,8 +39,6 @@ void *pci_traverse_device_nodes(struct device_node *start,
 void *traverse_pci_dn(struct pci_dn *root,
 		      void *(*fn)(struct pci_dn *, void *),
 		      void *data);
-
-extern void pci_devs_phb_init(void);
 extern void pci_devs_phb_init_dynamic(struct pci_controller *phb);
 
 /* From rtas_pci.h */
diff --git a/arch/powerpc/kernel/eeh_dev.c b/arch/powerpc/kernel/eeh_dev.c
index 7815095..d6b2ca7 100644
--- a/arch/powerpc/kernel/eeh_dev.c
+++ b/arch/powerpc/kernel/eeh_dev.c
@@ -44,14 +44,13 @@
 /**
  * eeh_dev_init - Create EEH device according to OF node
  * @pdn: PCI device node
- * @data: PHB
  *
  * It will create EEH device according to the given OF node. The function
  * might be called by PCI emunation, DR, PHB hotplug.
  */
-void *eeh_dev_init(struct pci_dn *pdn, void *data)
+struct eeh_dev *eeh_dev_init(struct pci_dn *pdn)
 {
-	struct pci_controller *phb = data;
+	struct pci_controller *phb = pdn->phb;
 	struct eeh_dev *edev;
 
 	/* Allocate EEH device */
@@ -69,7 +68,7 @@ void *eeh_dev_init(struct pci_dn *pdn, void *data)
 	INIT_LIST_HEAD(&edev->list);
 	INIT_LIST_HEAD(&edev->rmv_list);
 
-	return NULL;
+	return edev;
 }
 
 /**
@@ -81,16 +80,8 @@ void *eeh_dev_init(struct pci_dn *pdn, void *data)
  */
 void eeh_dev_phb_init_dynamic(struct pci_controller *phb)
 {
-	struct pci_dn *root = phb->pci_data;
-
 	/* EEH PE for PHB */
 	eeh_phb_pe_create(phb);
-
-	/* EEH device for PHB */
-	eeh_dev_init(root, phb);
-
-	/* EEH devices for children OF nodes */
-	traverse_pci_dn(root, eeh_dev_init, phb);
 }
 
 /**
@@ -106,8 +97,6 @@ static int __init eeh_dev_phb_init(void)
 	list_for_each_entry_safe(phb, tmp, &hose_list, list_node)
 		eeh_dev_phb_init_dynamic(phb);
 
-	pr_info("EEH: devices created\n");
-
 	return 0;
 }
 
diff --git a/arch/powerpc/kernel/pci_dn.c b/arch/powerpc/kernel/pci_dn.c
index ecdccce..9cbf95a 100644
--- a/arch/powerpc/kernel/pci_dn.c
+++ b/arch/powerpc/kernel/pci_dn.c
@@ -209,8 +209,7 @@ struct pci_dn *add_dev_pci_data(struct pci_dev *pdev)
 		}
 
 		/* Create the EEH device for the VF */
-		eeh_dev_init(pdn, pci_bus_to_host(pdev->bus));
-		edev = pdn_to_eeh_dev(pdn);
+		edev = eeh_dev_init(pdn);
 		BUG_ON(!edev);
 		edev->physfn = pdev;
 	}
@@ -289,8 +288,11 @@ struct pci_dn *pci_add_device_node_info(struct pci_controller *hose,
 	const __be32 *regs;
 	struct device_node *parent;
 	struct pci_dn *pdn;
+#ifdef CONFIG_EEH
+	struct eeh_dev *edev;
+#endif
 
-	pdn = zalloc_maybe_bootmem(sizeof(*pdn), GFP_KERNEL);
+	pdn = kzalloc(sizeof(*pdn), GFP_KERNEL);
 	if (pdn == NULL)
 		return NULL;
 	dn->data = pdn;
@@ -319,6 +321,15 @@ struct pci_dn *pci_add_device_node_info(struct pci_controller *hose,
 	/* Extended config space */
 	pdn->pci_ext_config_space = (type && of_read_number(type, 1) == 1);
 
+	/* Create EEH device */
+#ifdef CONFIG_EEH
+	edev = eeh_dev_init(pdn);
+	if (!edev) {
+		kfree(pdn);
+		return NULL;
+	}
+#endif
+
 	/* Attach to parent node */
 	INIT_LIST_HEAD(&pdn->child_list);
 	INIT_LIST_HEAD(&pdn->list);
@@ -504,15 +515,19 @@ void pci_devs_phb_init_dynamic(struct pci_controller *phb)
  * pci device found underneath.  This routine runs once,
  * early in the boot sequence.
  */
-void __init pci_devs_phb_init(void)
+static int __init pci_devs_phb_init(void)
 {
 	struct pci_controller *phb, *tmp;
 
 	/* This must be done first so the device nodes have valid pci info! */
 	list_for_each_entry_safe(phb, tmp, &hose_list, list_node)
 		pci_devs_phb_init_dynamic(phb);
+
+	return 0;
 }
 
+core_initcall(pci_devs_phb_init);
+
 static void pci_dev_pdn_setup(struct pci_dev *pdev)
 {
 	struct pci_dn *pdn;
diff --git a/arch/powerpc/platforms/maple/pci.c b/arch/powerpc/platforms/maple/pci.c
index a923230..a2f89e6 100644
--- a/arch/powerpc/platforms/maple/pci.c
+++ b/arch/powerpc/platforms/maple/pci.c
@@ -568,6 +568,26 @@ void maple_pci_irq_fixup(struct pci_dev *dev)
 	DBG(" <- maple_pci_irq_fixup\n");
 }
 
+static int maple_pci_root_bridge_prepare(struct pci_host_bridge *bridge)
+{
+	struct pci_controller *hose = pci_bus_to_host(bridge->bus);
+	struct device_node *np, *child;
+
+	if (hose != u3_agp)
+		return 0;
+
+	/* Fixup the PCI<->OF mapping for U3 AGP due to bus renumbering. We
+	 * assume there is no P2P bridge on the AGP bus, which should be a
+	 * safe assumptions hopefully.
+	 */
+	np = hose->dn;
+	PCI_DN(np)->busno = 0xf0;
+	for_each_child_of_node(np, child)
+		PCI_DN(child)->busno = 0xf0;
+
+	return 0;
+}
+
 void __init maple_pci_init(void)
 {
 	struct device_node *np, *root;
@@ -605,19 +625,7 @@ void __init maple_pci_init(void)
 	if (ht && maple_add_bridge(ht) != 0)
 		of_node_put(ht);
 
-	/* Setup the linkage between OF nodes and PHBs */ 
-	pci_devs_phb_init();
-
-	/* Fixup the PCI<->OF mapping for U3 AGP due to bus renumbering. We
-	 * assume there is no P2P bridge on the AGP bus, which should be a
-	 * safe assumptions hopefully.
-	 */
-	if (u3_agp) {
-		struct device_node *np = u3_agp->dn;
-		PCI_DN(np)->busno = 0xf0;
-		for (np = np->child; np; np = np->sibling)
-			PCI_DN(np)->busno = 0xf0;
-	}
+	ppc_md.pcibios_root_bridge_prepare = maple_pci_root_bridge_prepare;
 
 	/* Tell pci.c to not change any resource allocations.  */
 	pci_add_flags(PCI_PROBE_ONLY);
diff --git a/arch/powerpc/platforms/pasemi/pci.c b/arch/powerpc/platforms/pasemi/pci.c
index f3a68a0..10c4e8f 100644
--- a/arch/powerpc/platforms/pasemi/pci.c
+++ b/arch/powerpc/platforms/pasemi/pci.c
@@ -229,9 +229,6 @@ void __init pas_pci_init(void)
 			of_node_get(np);
 
 	of_node_put(root);
-
-	/* Setup the linkage between OF nodes and PHBs */
-	pci_devs_phb_init();
 }
 
 void __iomem *pasemi_pci_getcfgaddr(struct pci_dev *dev, int offset)
diff --git a/arch/powerpc/platforms/powermac/pci.c b/arch/powerpc/platforms/powermac/pci.c
index 59ab16f..6e06c3b 100644
--- a/arch/powerpc/platforms/powermac/pci.c
+++ b/arch/powerpc/platforms/powermac/pci.c
@@ -878,6 +878,29 @@ void pmac_pci_irq_fixup(struct pci_dev *dev)
 #endif /* CONFIG_PPC32 */
 }
 
+#ifdef CONFIG_PPC64
+static int pmac_pci_root_bridge_prepare(struct pci_host_bridge *bridge)
+{
+	struct pci_controller *hose = pci_bus_to_host(bridge->bus);
+	struct device_node *np, *child;
+
+	if (hose != u3_agp)
+		return 0;
+
+	/* Fixup the PCI<->OF mapping for U3 AGP due to bus renumbering. We
+	 * assume there is no P2P bridge on the AGP bus, which should be a
+	 * safe assumptions for now. We should do something better in the
+	 * future though
+	 */
+	np = hose->dn;
+	PCI_DN(np)->busno = 0xf0;
+	for_each_child_of_node(np, child)
+		PCI_DN(child)->busno = 0xf0;
+
+	return 0;
+}
+#endif /* CONFIG_PPC64 */
+
 void __init pmac_pci_init(void)
 {
 	struct device_node *np, *root;
@@ -914,20 +937,7 @@ void __init pmac_pci_init(void)
 	if (ht && pmac_add_bridge(ht) != 0)
 		of_node_put(ht);
 
-	/* Setup the linkage between OF nodes and PHBs */
-	pci_devs_phb_init();
-
-	/* Fixup the PCI<->OF mapping for U3 AGP due to bus renumbering. We
-	 * assume there is no P2P bridge on the AGP bus, which should be a
-	 * safe assumptions for now. We should do something better in the
-	 * future though
-	 */
-	if (u3_agp) {
-		struct device_node *np = u3_agp->dn;
-		PCI_DN(np)->busno = 0xf0;
-		for (np = np->child; np; np = np->sibling)
-			PCI_DN(np)->busno = 0xf0;
-	}
+	ppc_md.pcibios_root_bridge_prepare = pmac_pci_root_bridge_prepare;
 	/* pmac_check_ht_link(); */
 
 #else /* CONFIG_PPC64 */
diff --git a/arch/powerpc/platforms/powernv/pci.c b/arch/powerpc/platforms/powernv/pci.c
index 8827461..67a33e9 100644
--- a/arch/powerpc/platforms/powernv/pci.c
+++ b/arch/powerpc/platforms/powernv/pci.c
@@ -822,9 +822,6 @@ void __init pnv_pci_init(void)
 	for_each_compatible_node(np, NULL, "ibm,ioda2-npu-phb")
 		pnv_pci_init_npu_phb(np);
 
-	/* Setup the linkage between OF nodes and PHBs */
-	pci_devs_phb_init();
-
 	/* Configure IOMMU DMA hooks */
 	set_pci_dma_ops(&dma_iommu_ops);
 }
diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c
index cd739da..62041a3 100644
--- a/arch/powerpc/platforms/pseries/setup.c
+++ b/arch/powerpc/platforms/pseries/setup.c
@@ -263,11 +263,8 @@ static int pci_dn_reconfig_notifier(struct notifier_block *nb, unsigned long act
 	case OF_RECONFIG_ATTACH_NODE:
 		parent = of_get_parent(np);
 		pdn = parent ? PCI_DN(parent) : NULL;
-		if (pdn) {
-			/* Create pdn and EEH device */
+		if (pdn)
 			pci_add_device_node_info(pdn->phb, np);
-			eeh_dev_init(PCI_DN(np), pdn->phb);
-		}
 
 		of_node_put(parent);
 		break;
@@ -490,7 +487,6 @@ static void __init find_and_init_phbs(void)
 	}
 
 	of_node_put(root);
-	pci_devs_phb_init();
 
 	/*
 	 * PCI_PROBE_ONLY and PCI_REASSIGN_ALL_BUS can be set via properties
-- 
2.1.0

  parent reply	other threads:[~2016-05-03 13:33 UTC|newest]

Thread overview: 34+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-05-03 13:22 [PATCH v9 00/22] powerpc/powernv: PCI hotplug support Gavin Shan
2016-05-03 13:22 ` [PATCH v9 01/22] PCI: Add pcibios_setup_bridge() Gavin Shan
2016-05-03 13:22 ` [PATCH v9 02/22] powerpc/pci: Override pcibios_setup_bridge() Gavin Shan
2016-05-03 13:22 ` [PATCH v9 03/22] powerpc/powernv: Move pnv_pci_ioda_setup_opal_tce_kill() around Gavin Shan
2016-05-06  6:36   ` Alexey Kardashevskiy
2016-05-03 13:22 ` [PATCH v9 04/22] powerpc/powernv: Increase PE# capacity Gavin Shan
2016-05-06  7:17   ` Alexey Kardashevskiy
2016-05-06 11:05     ` Gavin Shan
2016-05-03 13:22 ` [PATCH v9 05/22] powerpc/powernv: Allocate PE# in reverse order Gavin Shan
2016-05-03 13:22 ` [PATCH v9 06/22] powerpc/powernv: Create PEs in pcibios_setup_bridge() Gavin Shan
2016-05-03 13:22 ` [PATCH v9 07/22] powerpc/powernv: Setup PE for root bus Gavin Shan
2016-05-03 13:22 ` [PATCH v9 08/22] powerpc/powernv: Extend PCI bridge resources Gavin Shan
2016-05-03 13:22 ` [PATCH v9 09/22] powerpc/powernv: Make pnv_ioda_deconfigure_pe() visible Gavin Shan
2016-05-03 13:22 ` [PATCH v9 10/22] powerpc/powernv: Dynamically release PE Gavin Shan
2016-05-03 13:22 ` [PATCH v9 11/22] powerpc/pci: Update bridge windows on PCI plug Gavin Shan
2016-05-03 13:22 ` Gavin Shan [this message]
2016-05-03 13:22 ` [PATCH v9 13/22] powerpc/powernv: Support PCI slot ID Gavin Shan
2016-05-03 13:22 ` [PATCH v9 14/22] powerpc/powernv: Use PCI slot reset infrastructure Gavin Shan
2016-05-03 13:22 ` [PATCH v9 15/22] powerpc/powernv: Functions to get/set PCI slot state Gavin Shan
2016-05-11  3:28   ` Alistair Popple
2016-05-03 13:22 ` [PATCH v9 16/22] drivers/of: Split unflatten_dt_node() Gavin Shan
2016-05-03 13:22 ` [PATCH v9 17/22] drivers/of: Avoid recursively calling unflatten_dt_node() Gavin Shan
2016-05-03 13:22 ` [PATCH v9 18/22] drivers/of: Rename unflatten_dt_node() Gavin Shan
2016-05-03 13:22 ` [PATCH v9 19/22] drivers/of: Specify parent node in of_fdt_unflatten_tree() Gavin Shan
2016-05-03 13:22 ` [PATCH v9 20/22] drivers/of: Return allocated memory from of_fdt_unflatten_tree() Gavin Shan
2016-05-03 13:22 ` [PATCH v9 21/22] drivers/of: Export of_detach_node() Gavin Shan
2016-05-04 13:36   ` Gavin Shan
2016-05-05 19:42     ` Rob Herring
2016-05-06  0:40       ` Gavin Shan
2016-05-03 13:22 ` [PATCH v9 22/22] PCI/hotplug: PowerPC PowerNV PCI hotplug driver Gavin Shan
2016-05-05 17:04   ` Rob Herring
2016-05-06  0:28     ` Gavin Shan
2016-05-06 13:12       ` Rob Herring
2016-05-08 23:51         ` Gavin Shan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1462281773-26438-13-git-send-email-gwshan@linux.vnet.ibm.com \
    --to=gwshan@linux.vnet.ibm.com \
    --cc=aik@ozlabs.ru \
    --cc=alistair@popple.id.au \
    --cc=benh@kernel.crashing.org \
    --cc=bhelgaas@google.com \
    --cc=devicetree@vger.kernel.org \
    --cc=dja@axtens.net \
    --cc=linux-pci@vger.kernel.org \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=mpe@ellerman.id.au \
    --cc=robherring2@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).