linuxppc-dev.lists.ozlabs.org archive mirror
 help / color / mirror / Atom feed
From: Gavin Shan <gwshan@linux.vnet.ibm.com>
To: linuxppc-dev@lists.ozlabs.org
Cc: linux-pci@vger.kernel.org, devicetree@vger.kernel.org,
	benh@kernel.crashing.org, mpe@ellerman.id.au, aik@ozlabs.ru,
	bhelgaas@google.com, robherring2@gmail.com, dja@axtens.net,
	alistair@popple.id.au, Gavin Shan <gwshan@linux.vnet.ibm.com>
Subject: [PATCH v9 04/22] powerpc/powernv: Increase PE# capacity
Date: Tue,  3 May 2016 23:22:35 +1000	[thread overview]
Message-ID: <1462281773-26438-5-git-send-email-gwshan@linux.vnet.ibm.com> (raw)
In-Reply-To: <1462281773-26438-1-git-send-email-gwshan@linux.vnet.ibm.com>

Each PHB maintains an array helping to translate 2-bytes Request
ID (RID) to PE# with the assumption that PE# takes one byte, meaning
that we can't have more than 256 PEs. However, pci_dn->pe_number
already had 4-bytes for the PE#.

This extends the PE# capacity for every PHB. After that, the PE number
is represented by 4-bytes value. Then we can reuse IODA_INVALID_PE to
check the PE# in phb->pe_rmap[] is valid or not.

Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Reviewed-by: Daniel Axtens <dja@axtens.net>
---
 arch/powerpc/platforms/powernv/pci-ioda.c | 6 +++++-
 arch/powerpc/platforms/powernv/pci.h      | 7 ++-----
 2 files changed, 7 insertions(+), 6 deletions(-)

diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c
index cbd4c0b..cf96cb5 100644
--- a/arch/powerpc/platforms/powernv/pci-ioda.c
+++ b/arch/powerpc/platforms/powernv/pci-ioda.c
@@ -768,7 +768,7 @@ static int pnv_ioda_deconfigure_pe(struct pnv_phb *phb, struct pnv_ioda_pe *pe)
 
 	/* Clear the reverse map */
 	for (rid = pe->rid; rid < rid_end; rid++)
-		phb->ioda.pe_rmap[rid] = 0;
+		phb->ioda.pe_rmap[rid] = IODA_INVALID_PE;
 
 	/* Release from all parents PELT-V */
 	while (parent) {
@@ -3406,6 +3406,10 @@ static void __init pnv_pci_init_ioda_phb(struct device_node *np,
 	if (prop32)
 		phb->ioda.reserved_pe_idx = be32_to_cpup(prop32);
 
+	/* Invalidate RID to PE# mapping */
+	for (segno = 0; segno < ARRAY_SIZE(phb->ioda.pe_rmap); segno++)
+		phb->ioda.pe_rmap[segno] = IODA_INVALID_PE;
+
 	/* Parse 64-bit MMIO range */
 	pnv_ioda_parse_m64_window(phb);
 
diff --git a/arch/powerpc/platforms/powernv/pci.h b/arch/powerpc/platforms/powernv/pci.h
index 904f60b..80f5326 100644
--- a/arch/powerpc/platforms/powernv/pci.h
+++ b/arch/powerpc/platforms/powernv/pci.h
@@ -156,11 +156,8 @@ struct pnv_phb {
 		struct list_head	pe_list;
 		struct mutex            pe_list_mutex;
 
-		/* Reverse map of PEs, will have to extend if
-		 * we are to support more than 256 PEs, indexed
-		 * bus { bus, devfn }
-		 */
-		unsigned char		pe_rmap[0x10000];
+		/* Reverse map of PEs, indexed by {bus, devfn} */
+		unsigned int		pe_rmap[0x10000];
 
 		/* TCE cache invalidate registers (physical and
 		 * remapped)
-- 
2.1.0

  parent reply	other threads:[~2016-05-03 13:23 UTC|newest]

Thread overview: 34+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-05-03 13:22 [PATCH v9 00/22] powerpc/powernv: PCI hotplug support Gavin Shan
2016-05-03 13:22 ` [PATCH v9 01/22] PCI: Add pcibios_setup_bridge() Gavin Shan
2016-05-03 13:22 ` [PATCH v9 02/22] powerpc/pci: Override pcibios_setup_bridge() Gavin Shan
2016-05-03 13:22 ` [PATCH v9 03/22] powerpc/powernv: Move pnv_pci_ioda_setup_opal_tce_kill() around Gavin Shan
2016-05-06  6:36   ` Alexey Kardashevskiy
2016-05-03 13:22 ` Gavin Shan [this message]
2016-05-06  7:17   ` [PATCH v9 04/22] powerpc/powernv: Increase PE# capacity Alexey Kardashevskiy
2016-05-06 11:05     ` Gavin Shan
2016-05-03 13:22 ` [PATCH v9 05/22] powerpc/powernv: Allocate PE# in reverse order Gavin Shan
2016-05-03 13:22 ` [PATCH v9 06/22] powerpc/powernv: Create PEs in pcibios_setup_bridge() Gavin Shan
2016-05-03 13:22 ` [PATCH v9 07/22] powerpc/powernv: Setup PE for root bus Gavin Shan
2016-05-03 13:22 ` [PATCH v9 08/22] powerpc/powernv: Extend PCI bridge resources Gavin Shan
2016-05-03 13:22 ` [PATCH v9 09/22] powerpc/powernv: Make pnv_ioda_deconfigure_pe() visible Gavin Shan
2016-05-03 13:22 ` [PATCH v9 10/22] powerpc/powernv: Dynamically release PE Gavin Shan
2016-05-03 13:22 ` [PATCH v9 11/22] powerpc/pci: Update bridge windows on PCI plug Gavin Shan
2016-05-03 13:22 ` [PATCH v9 12/22] powerpc/pci: Delay populating pdn Gavin Shan
2016-05-03 13:22 ` [PATCH v9 13/22] powerpc/powernv: Support PCI slot ID Gavin Shan
2016-05-03 13:22 ` [PATCH v9 14/22] powerpc/powernv: Use PCI slot reset infrastructure Gavin Shan
2016-05-03 13:22 ` [PATCH v9 15/22] powerpc/powernv: Functions to get/set PCI slot state Gavin Shan
2016-05-11  3:28   ` Alistair Popple
2016-05-03 13:22 ` [PATCH v9 16/22] drivers/of: Split unflatten_dt_node() Gavin Shan
2016-05-03 13:22 ` [PATCH v9 17/22] drivers/of: Avoid recursively calling unflatten_dt_node() Gavin Shan
2016-05-03 13:22 ` [PATCH v9 18/22] drivers/of: Rename unflatten_dt_node() Gavin Shan
2016-05-03 13:22 ` [PATCH v9 19/22] drivers/of: Specify parent node in of_fdt_unflatten_tree() Gavin Shan
2016-05-03 13:22 ` [PATCH v9 20/22] drivers/of: Return allocated memory from of_fdt_unflatten_tree() Gavin Shan
2016-05-03 13:22 ` [PATCH v9 21/22] drivers/of: Export of_detach_node() Gavin Shan
2016-05-04 13:36   ` Gavin Shan
2016-05-05 19:42     ` Rob Herring
2016-05-06  0:40       ` Gavin Shan
2016-05-03 13:22 ` [PATCH v9 22/22] PCI/hotplug: PowerPC PowerNV PCI hotplug driver Gavin Shan
2016-05-05 17:04   ` Rob Herring
2016-05-06  0:28     ` Gavin Shan
2016-05-06 13:12       ` Rob Herring
2016-05-08 23:51         ` Gavin Shan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1462281773-26438-5-git-send-email-gwshan@linux.vnet.ibm.com \
    --to=gwshan@linux.vnet.ibm.com \
    --cc=aik@ozlabs.ru \
    --cc=alistair@popple.id.au \
    --cc=benh@kernel.crashing.org \
    --cc=bhelgaas@google.com \
    --cc=devicetree@vger.kernel.org \
    --cc=dja@axtens.net \
    --cc=linux-pci@vger.kernel.org \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=mpe@ellerman.id.au \
    --cc=robherring2@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).