* [PATCH v3 1/5] powerpc/dts: add mcke-gpios for PM feature
@ 2016-08-02 11:58 Chenhui Zhao
2016-08-04 17:10 ` Rob Herring
0 siblings, 1 reply; 3+ messages in thread
From: Chenhui Zhao @ 2016-08-02 11:58 UTC (permalink / raw)
To: oss, devicetree, linuxppc-dev, linux-kernel
Cc: jason.jin, z.chenhui, Chenhui Zhao
Signed-off-by: Chenhui Zhao <chenhui.zhao@nxp.com>
---
Documentation/devicetree/bindings/soc/fsl/rcpm.txt | 13 +++++++++++++
arch/powerpc/boot/dts/fsl/t1040si-post.dtsi | 3 +++
2 files changed, 16 insertions(+)
diff --git a/Documentation/devicetree/bindings/soc/fsl/rcpm.txt b/Documentation/devicetree/bindings/soc/fsl/rcpm.txt
index e284e4e..1d44a80 100644
--- a/Documentation/devicetree/bindings/soc/fsl/rcpm.txt
+++ b/Documentation/devicetree/bindings/soc/fsl/rcpm.txt
@@ -21,6 +21,10 @@ Required properites:
* "fsl,qoriq-rcpm-2.0": for chassis 2.0 rcpm
* "fsl,qoriq-rcpm-2.1": for chassis 2.1 rcpm
+Optional properites:
+ - mcke-gpios : The GPIO pin is used for keeping the MCKE signal of DDR modules
+ low in the LPM35 state on some platforms, such as T1040.
+
All references to "1.0" and "2.0" refer to the QorIQ chassis version to
which the chip complies.
Chassis Version Example Chips
@@ -37,6 +41,15 @@ The RCPM node for T4240:
fsl,#rcpm-wakeup-cells = <2>;
};
+The RCPM node for T1040 (which supports LPM35 state):
+ rcpm: global-utilities@e2000 {
+ compatible = "fsl,t1040-rcpm", "fsl,qoriq-rcpm-2.1";
+ reg = <0xe2000 0x1000>;
+ fsl,#rcpm-wakeup-cells = <1>;
+ mcke-gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>
+ };
+
+
* Freescale RCPM Wakeup Source Device Tree Bindings
-------------------------------------------
Required fsl,rcpm-wakeup property should be added to a device node if the device
diff --git a/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi b/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi
index 507649e..f66e7dd 100644
--- a/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi
@@ -33,6 +33,7 @@
*/
#include <dt-bindings/thermal/thermal.h>
+#include <dt-bindings/gpio/gpio.h>
&bman_fbpr {
compatible = "fsl,bman-fbpr";
@@ -474,6 +475,8 @@
rcpm: global-utilities@e2000 {
compatible = "fsl,t1040-rcpm", "fsl,qoriq-rcpm-2.1";
reg = <0xe2000 0x1000>;
+ fsl,#rcpm-wakeup-cells = <1>;
+ mcke-gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
};
sfp: sfp@e8000 {
--
1.9.1
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH v3 1/5] powerpc/dts: add mcke-gpios for PM feature
2016-08-02 11:58 [PATCH v3 1/5] powerpc/dts: add mcke-gpios for PM feature Chenhui Zhao
@ 2016-08-04 17:10 ` Rob Herring
0 siblings, 0 replies; 3+ messages in thread
From: Rob Herring @ 2016-08-04 17:10 UTC (permalink / raw)
To: Chenhui Zhao
Cc: oss, devicetree, linuxppc-dev, linux-kernel, jason.jin, z.chenhui
On Tue, Aug 02, 2016 at 07:58:44PM +0800, Chenhui Zhao wrote:
> Signed-off-by: Chenhui Zhao <chenhui.zhao@nxp.com>
> ---
> Documentation/devicetree/bindings/soc/fsl/rcpm.txt | 13 +++++++++++++
> arch/powerpc/boot/dts/fsl/t1040si-post.dtsi | 3 +++
> 2 files changed, 16 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/soc/fsl/rcpm.txt b/Documentation/devicetree/bindings/soc/fsl/rcpm.txt
> index e284e4e..1d44a80 100644
> --- a/Documentation/devicetree/bindings/soc/fsl/rcpm.txt
> +++ b/Documentation/devicetree/bindings/soc/fsl/rcpm.txt
> @@ -21,6 +21,10 @@ Required properites:
> * "fsl,qoriq-rcpm-2.0": for chassis 2.0 rcpm
> * "fsl,qoriq-rcpm-2.1": for chassis 2.1 rcpm
>
> +Optional properites:
> + - mcke-gpios : The GPIO pin is used for keeping the MCKE signal of DDR modules
> + low in the LPM35 state on some platforms, such as T1040.
Needs a vendor prefix.
^ permalink raw reply [flat|nested] 3+ messages in thread
* [PATCH v3 1/5] powerpc/dts: add mcke-gpios for PM feature
@ 2016-08-02 11:59 Chenhui Zhao
0 siblings, 0 replies; 3+ messages in thread
From: Chenhui Zhao @ 2016-08-02 11:59 UTC (permalink / raw)
To: oss, linuxppc-dev, linux-kernel; +Cc: jason.jin, z.chenhui, Chenhui Zhao
Signed-off-by: Chenhui Zhao <chenhui.zhao@nxp.com>
---
Documentation/devicetree/bindings/soc/fsl/rcpm.txt | 13 +++++++++++++
arch/powerpc/boot/dts/fsl/t1040si-post.dtsi | 3 +++
2 files changed, 16 insertions(+)
diff --git a/Documentation/devicetree/bindings/soc/fsl/rcpm.txt b/Documentation/devicetree/bindings/soc/fsl/rcpm.txt
index e284e4e..1d44a80 100644
--- a/Documentation/devicetree/bindings/soc/fsl/rcpm.txt
+++ b/Documentation/devicetree/bindings/soc/fsl/rcpm.txt
@@ -21,6 +21,10 @@ Required properites:
* "fsl,qoriq-rcpm-2.0": for chassis 2.0 rcpm
* "fsl,qoriq-rcpm-2.1": for chassis 2.1 rcpm
+Optional properites:
+ - mcke-gpios : The GPIO pin is used for keeping the MCKE signal of DDR modules
+ low in the LPM35 state on some platforms, such as T1040.
+
All references to "1.0" and "2.0" refer to the QorIQ chassis version to
which the chip complies.
Chassis Version Example Chips
@@ -37,6 +41,15 @@ The RCPM node for T4240:
fsl,#rcpm-wakeup-cells = <2>;
};
+The RCPM node for T1040 (which supports LPM35 state):
+ rcpm: global-utilities@e2000 {
+ compatible = "fsl,t1040-rcpm", "fsl,qoriq-rcpm-2.1";
+ reg = <0xe2000 0x1000>;
+ fsl,#rcpm-wakeup-cells = <1>;
+ mcke-gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>
+ };
+
+
* Freescale RCPM Wakeup Source Device Tree Bindings
-------------------------------------------
Required fsl,rcpm-wakeup property should be added to a device node if the device
diff --git a/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi b/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi
index 507649e..f66e7dd 100644
--- a/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi
@@ -33,6 +33,7 @@
*/
#include <dt-bindings/thermal/thermal.h>
+#include <dt-bindings/gpio/gpio.h>
&bman_fbpr {
compatible = "fsl,bman-fbpr";
@@ -474,6 +475,8 @@
rcpm: global-utilities@e2000 {
compatible = "fsl,t1040-rcpm", "fsl,qoriq-rcpm-2.1";
reg = <0xe2000 0x1000>;
+ fsl,#rcpm-wakeup-cells = <1>;
+ mcke-gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
};
sfp: sfp@e8000 {
--
1.9.1
^ permalink raw reply related [flat|nested] 3+ messages in thread
end of thread, other threads:[~2016-08-04 17:10 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-08-02 11:58 [PATCH v3 1/5] powerpc/dts: add mcke-gpios for PM feature Chenhui Zhao
2016-08-04 17:10 ` Rob Herring
2016-08-02 11:59 Chenhui Zhao
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).