[PATCH] ASoC: fsl_sai: Support multiple data channel enable bits

[PATCH] ASoC: fsl_sai: Support multiple data channel enable bits

[Shengjiu Wang]

One data channel is one data line. From imx7ulp, the SAI IP is
enhanced to support multiple data channels.

If there is only two channels input and slots is 2, then enable one
data channel is enough for data transfer. So enable the TCE/RCE and
transmit/receive mask register according to the input channels and
slots configuration.

Move the data channel enablement from startup() to hw_params().

Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
---
 sound/soc/fsl/fsl_sai.c | 30 ++++++++++++------------------
 sound/soc/fsl/fsl_sai.h |  2 +-
 2 files changed, 13 insertions(+), 19 deletions(-)

diff --git a/sound/soc/fsl/fsl_sai.c b/sound/soc/fsl/fsl_sai.c
index 62c5fdb678fc..38c7bcbb361d 100644
--- a/sound/soc/fsl/fsl_sai.c
+++ b/sound/soc/fsl/fsl_sai.c
@@ -443,6 +443,7 @@ static int fsl_sai_hw_params(struct snd_pcm_substream *substream,
 	u32 slots = (channels == 1) ? 2 : channels;
 	u32 slot_width = word_width;
 	int adir = tx ? RX : TX;
+	u32 pins;
 	int ret;
 
 	if (sai->slots)
@@ -451,6 +452,8 @@ static int fsl_sai_hw_params(struct snd_pcm_substream *substream,
 	if (sai->slot_width)
 		slot_width = sai->slot_width;
 
+	pins = DIV_ROUND_UP(channels, slots);
+
 	if (!sai->is_slave_mode) {
 		if (sai->bclk_ratio)
 			ret = fsl_sai_set_bclk(cpu_dai, tx,
@@ -501,13 +504,17 @@ static int fsl_sai_hw_params(struct snd_pcm_substream *substream,
 				   FSL_SAI_CR5_FBT_MASK, val_cr5);
 	}
 
+	regmap_update_bits(sai->regmap, FSL_SAI_xCR3(tx, ofs),
+			   FSL_SAI_CR3_TRCE_MASK,
+			   FSL_SAI_CR3_TRCE((1 << pins) - 1));
 	regmap_update_bits(sai->regmap, FSL_SAI_xCR4(tx, ofs),
 			   FSL_SAI_CR4_SYWD_MASK | FSL_SAI_CR4_FRSZ_MASK,
 			   val_cr4);
 	regmap_update_bits(sai->regmap, FSL_SAI_xCR5(tx, ofs),
 			   FSL_SAI_CR5_WNW_MASK | FSL_SAI_CR5_W0W_MASK |
 			   FSL_SAI_CR5_FBT_MASK, val_cr5);
-	regmap_write(sai->regmap, FSL_SAI_xMR(tx), ~0UL - ((1 << channels) - 1));
+	regmap_write(sai->regmap, FSL_SAI_xMR(tx),
+		     ~0UL - ((1 << min(channels, slots)) - 1));
 
 	return 0;
 }
@@ -517,6 +524,10 @@ static int fsl_sai_hw_free(struct snd_pcm_substream *substream,
 {
 	struct fsl_sai *sai = snd_soc_dai_get_drvdata(cpu_dai);
 	bool tx = substream->stream == SNDRV_PCM_STREAM_PLAYBACK;
+	unsigned int ofs = sai->soc_data->reg_offset;
+
+	regmap_update_bits(sai->regmap, FSL_SAI_xCR3(tx, ofs),
+			   FSL_SAI_CR3_TRCE_MASK, 0);
 
 	if (!sai->is_slave_mode &&
 			sai->mclk_streams & BIT(substream->stream)) {
@@ -651,14 +662,9 @@ static int fsl_sai_startup(struct snd_pcm_substream *substream,
 		struct snd_soc_dai *cpu_dai)
 {
 	struct fsl_sai *sai = snd_soc_dai_get_drvdata(cpu_dai);
-	unsigned int ofs = sai->soc_data->reg_offset;
 	bool tx = substream->stream == SNDRV_PCM_STREAM_PLAYBACK;
 	int ret;
 
-	regmap_update_bits(sai->regmap, FSL_SAI_xCR3(tx, ofs),
-			   FSL_SAI_CR3_TRCE_MASK,
-			   FSL_SAI_CR3_TRCE);
-
 	/*
 	 * EDMA controller needs period size to be a multiple of
 	 * tx/rx maxburst
@@ -675,17 +681,6 @@ static int fsl_sai_startup(struct snd_pcm_substream *substream,
 	return ret;
 }
 
-static void fsl_sai_shutdown(struct snd_pcm_substream *substream,
-		struct snd_soc_dai *cpu_dai)
-{
-	struct fsl_sai *sai = snd_soc_dai_get_drvdata(cpu_dai);
-	unsigned int ofs = sai->soc_data->reg_offset;
-	bool tx = substream->stream == SNDRV_PCM_STREAM_PLAYBACK;
-
-	regmap_update_bits(sai->regmap, FSL_SAI_xCR3(tx, ofs),
-			   FSL_SAI_CR3_TRCE_MASK, 0);
-}
-
 static const struct snd_soc_dai_ops fsl_sai_pcm_dai_ops = {
 	.set_bclk_ratio	= fsl_sai_set_dai_bclk_ratio,
 	.set_sysclk	= fsl_sai_set_dai_sysclk,
@@ -695,7 +690,6 @@ static const struct snd_soc_dai_ops fsl_sai_pcm_dai_ops = {
 	.hw_free	= fsl_sai_hw_free,
 	.trigger	= fsl_sai_trigger,
 	.startup	= fsl_sai_startup,
-	.shutdown	= fsl_sai_shutdown,
 };
 
 static int fsl_sai_dai_probe(struct snd_soc_dai *cpu_dai)
diff --git a/sound/soc/fsl/fsl_sai.h b/sound/soc/fsl/fsl_sai.h
index 6aba7d28f5f3..5f630be74853 100644
--- a/sound/soc/fsl/fsl_sai.h
+++ b/sound/soc/fsl/fsl_sai.h
@@ -109,7 +109,7 @@
 #define FSL_SAI_CR2_DIV_MASK	0xff
 
 /* SAI Transmit and Receive Configuration 3 Register */
-#define FSL_SAI_CR3_TRCE	BIT(16)
+#define FSL_SAI_CR3_TRCE(x)     ((x) << 16)
 #define FSL_SAI_CR3_TRCE_MASK	GENMASK(23, 16)
 #define FSL_SAI_CR3_WDFL(x)	(x)
 #define FSL_SAI_CR3_WDFL_MASK	0x1f
-- 
2.27.0

Re: [PATCH] ASoC: fsl_sai: Support multiple data channel enable bits

[Nicolin Chen]

On Tue, Sep 01, 2020 at 07:01:08PM +0800, Shengjiu Wang wrote:
> One data channel is one data line. From imx7ulp, the SAI IP is
> enhanced to support multiple data channels.
> 
> If there is only two channels input and slots is 2, then enable one
> data channel is enough for data transfer. So enable the TCE/RCE and
> transmit/receive mask register according to the input channels and
> slots configuration.
> 
> Move the data channel enablement from startup() to hw_params().
> 
> Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>

Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>

Re: [PATCH] ASoC: fsl_sai: Support multiple data channel enable bits

[Mark Brown]

On Tue, 1 Sep 2020 19:01:08 +0800, Shengjiu Wang wrote:
> One data channel is one data line. From imx7ulp, the SAI IP is
> enhanced to support multiple data channels.
> 
> If there is only two channels input and slots is 2, then enable one
> data channel is enough for data transfer. So enable the TCE/RCE and
> transmit/receive mask register according to the input channels and
> slots configuration.
> 
> [...]

Applied to

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next

Thanks!

[1/1] ASoC: fsl_sai: Support multiple data channel enable bits
      commit: 770f58d7d2c58b8ff31d3694ce14a785c2e75009

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark