* [PATCH 0/3] ucc_geth: Some more fixes
@ 2009-12-24 15:30 Anton Vorontsov
2009-12-24 15:31 ` [PATCH 1/3] ucc_geth: Fix empty TX queue processing Anton Vorontsov
` (3 more replies)
0 siblings, 4 replies; 5+ messages in thread
From: Anton Vorontsov @ 2009-12-24 15:30 UTC (permalink / raw)
To: David Miller; +Cc: linuxppc-dev, netdev, Lennart Sorensen
Hi all,
Here are some more fixes and one small enhancement for the ucc_geth
driver.
Thanks,
--
Anton Vorontsov
email: cbouatmailru@gmail.com
irc://irc.freenode.net/bd2
^ permalink raw reply [flat|nested] 5+ messages in thread
* [PATCH 1/3] ucc_geth: Fix empty TX queue processing
2009-12-24 15:30 [PATCH 0/3] ucc_geth: Some more fixes Anton Vorontsov
@ 2009-12-24 15:31 ` Anton Vorontsov
2009-12-24 15:31 ` [PATCH 2/3] ucc_geth: Fix netdev watchdog triggering on link changes Anton Vorontsov
` (2 subsequent siblings)
3 siblings, 0 replies; 5+ messages in thread
From: Anton Vorontsov @ 2009-12-24 15:31 UTC (permalink / raw)
To: David Miller; +Cc: linuxppc-dev, netdev, Lennart Sorensen
Following oops was seen with the ucc_geth driver:
Unable to handle kernel paging request for data at address 0x00000058
Faulting instruction address: 0xc024f2fc
Oops: Kernel access of bad area, sig: 11 [#1]
[...]
NIP [c024f2fc] skb_recycle_check+0x14/0x100
LR [e30aa0a4] ucc_geth_poll+0xd8/0x4e0 [ucc_geth_driver]
Call Trace:
[df857d50] [c000b03c] __ipipe_grab_irq+0x3c/0xa4 (unreliable)
[df857d60] [e30aa0a4] ucc_geth_poll+0xd8/0x4e0 [ucc_geth_driver]
[df857dd0] [c0258cf8] net_rx_action+0xf8/0x1b8
[df857e10] [c0032a38] __do_softirq+0xb8/0x13c
[df857e60] [c00065cc] do_softirq+0xa0/0xac
[...]
This is because ucc_geth_tx() tries to process an empty queue when
queues are logically stopped. Stopping the queues doesn't disable
polling, and since nowadays ucc_geth_tx() is actually called from
the polling routine, the oops above might pop up.
Fix this by removing 'netif_queue_stopped() == 0' check.
Reported-by: Lennart Sorensen <lsorense@csclub.uwaterloo.ca>
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Tested-by: Lennart Sorensen <lsorense@csclub.uwaterloo.ca>
Cc: Stable <stable@vger.kernel.org> [2.6.32]
---
drivers/net/ucc_geth.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/drivers/net/ucc_geth.c b/drivers/net/ucc_geth.c
index afaf088..0f8c99e 100644
--- a/drivers/net/ucc_geth.c
+++ b/drivers/net/ucc_geth.c
@@ -3273,7 +3273,7 @@ static int ucc_geth_tx(struct net_device *dev, u8 txQ)
/* Handle the transmitted buffer and release */
/* the BD to be used with the current frame */
- if ((bd == ugeth->txBd[txQ]) && (netif_queue_stopped(dev) == 0))
+ if (bd == ugeth->txBd[txQ]) /* queue empty? */
break;
dev->stats.tx_packets++;
--
1.6.3.3
^ permalink raw reply related [flat|nested] 5+ messages in thread
* [PATCH 2/3] ucc_geth: Fix netdev watchdog triggering on link changes
2009-12-24 15:30 [PATCH 0/3] ucc_geth: Some more fixes Anton Vorontsov
2009-12-24 15:31 ` [PATCH 1/3] ucc_geth: Fix empty TX queue processing Anton Vorontsov
@ 2009-12-24 15:31 ` Anton Vorontsov
2009-12-24 15:31 ` [PATCH 3/3] ucc_geth: Don't needlessly change MAC settings in adjust_link() Anton Vorontsov
2009-12-27 4:25 ` [PATCH 0/3] ucc_geth: Some more fixes David Miller
3 siblings, 0 replies; 5+ messages in thread
From: Anton Vorontsov @ 2009-12-24 15:31 UTC (permalink / raw)
To: David Miller; +Cc: linuxppc-dev, netdev, Lennart Sorensen
Since commit 864fdf884e82bacbe8ca5e93bd43393a61d2e2b4 ("ucc_geth:
Fix hangs after switching from full to half duplex") ucc_geth driver
disables the controller during MAC configuration changes. Though,
disabling the controller might take quite awhile, and so the netdev
watchdog might get upset:
NETDEV WATCHDOG: eth2 (ucc_geth): transmit queue 0 timed out
------------[ cut here ]------------
Badness at c02729a8 [verbose debug info unavailable]
NIP: c02729a8 LR: c02729a8 CTR: c01b6088
REGS: c0451c40 TRAP: 0700 Not tainted (2.6.32-trunk-8360e)
[...]
NIP [c02729a8] dev_watchdog+0x280/0x290
LR [c02729a8] dev_watchdog+0x280/0x290
Call Trace:
[c0451cf0] [c02729a8] dev_watchdog+0x280/0x290 (unreliable)
[c0451d50] [c00377c4] run_timer_softirq+0x164/0x224
[c0451da0] [c0032a38] __do_softirq+0xb8/0x13c
[c0451df0] [c00065cc] do_softirq+0xa0/0xac
[c0451e00] [c003280c] irq_exit+0x7c/0x9c
[c0451e10] [c00640c4] __ipipe_sync_stage+0x248/0x24c
[...]
This patch fixes the issue by detaching the netdev during the
time we change the configuration.
Reported-by: Lennart Sorensen <lsorense@csclub.uwaterloo.ca>
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Tested-by: Lennart Sorensen <lsorense@csclub.uwaterloo.ca>
Cc: Stable <stable@vger.kernel.org> [2.6.32]
---
drivers/net/ucc_geth.c | 7 +++++--
1 files changed, 5 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ucc_geth.c b/drivers/net/ucc_geth.c
index 0f8c99e..7fff4c5 100644
--- a/drivers/net/ucc_geth.c
+++ b/drivers/net/ucc_geth.c
@@ -1563,7 +1563,10 @@ static int ugeth_disable(struct ucc_geth_private *ugeth, enum comm_dir mode)
static void ugeth_quiesce(struct ucc_geth_private *ugeth)
{
- /* Wait for and prevent any further xmits. */
+ /* Prevent any further xmits, plus detach the device. */
+ netif_device_detach(ugeth->ndev);
+
+ /* Wait for any current xmits to finish. */
netif_tx_disable(ugeth->ndev);
/* Disable the interrupt to avoid NAPI rescheduling. */
@@ -1577,7 +1580,7 @@ static void ugeth_activate(struct ucc_geth_private *ugeth)
{
napi_enable(&ugeth->napi);
enable_irq(ugeth->ug_info->uf_info.irq);
- netif_tx_wake_all_queues(ugeth->ndev);
+ netif_device_attach(ugeth->ndev);
}
/* Called every time the controller might need to be made
--
1.6.3.3
^ permalink raw reply related [flat|nested] 5+ messages in thread
* [PATCH 3/3] ucc_geth: Don't needlessly change MAC settings in adjust_link()
2009-12-24 15:30 [PATCH 0/3] ucc_geth: Some more fixes Anton Vorontsov
2009-12-24 15:31 ` [PATCH 1/3] ucc_geth: Fix empty TX queue processing Anton Vorontsov
2009-12-24 15:31 ` [PATCH 2/3] ucc_geth: Fix netdev watchdog triggering on link changes Anton Vorontsov
@ 2009-12-24 15:31 ` Anton Vorontsov
2009-12-27 4:25 ` [PATCH 0/3] ucc_geth: Some more fixes David Miller
3 siblings, 0 replies; 5+ messages in thread
From: Anton Vorontsov @ 2009-12-24 15:31 UTC (permalink / raw)
To: David Miller; +Cc: linuxppc-dev, netdev, Lennart Sorensen
If PHY doesn't have an IRQ, phylib would poll for link changes, and
would call adjust_link() every second. In that case we disable and
enable the controller every second.
Let's better check if there is actually anything changed, and, if so,
change the MAC settings.
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
---
drivers/net/ucc_geth.c | 33 ++++++++++++++++++---------------
1 files changed, 18 insertions(+), 15 deletions(-)
diff --git a/drivers/net/ucc_geth.c b/drivers/net/ucc_geth.c
index 7fff4c5..41ad2f3 100644
--- a/drivers/net/ucc_geth.c
+++ b/drivers/net/ucc_geth.c
@@ -1651,25 +1651,28 @@ static void adjust_link(struct net_device *dev)
ugeth->oldspeed = phydev->speed;
}
- /*
- * To change the MAC configuration we need to disable the
- * controller. To do so, we have to either grab ugeth->lock,
- * which is a bad idea since 'graceful stop' commands might
- * take quite a while, or we can quiesce driver's activity.
- */
- ugeth_quiesce(ugeth);
- ugeth_disable(ugeth, COMM_DIR_RX_AND_TX);
-
- out_be32(&ug_regs->maccfg2, tempval);
- out_be32(&uf_regs->upsmr, upsmr);
-
- ugeth_enable(ugeth, COMM_DIR_RX_AND_TX);
- ugeth_activate(ugeth);
-
if (!ugeth->oldlink) {
new_state = 1;
ugeth->oldlink = 1;
}
+
+ if (new_state) {
+ /*
+ * To change the MAC configuration we need to disable
+ * the controller. To do so, we have to either grab
+ * ugeth->lock, which is a bad idea since 'graceful
+ * stop' commands might take quite a while, or we can
+ * quiesce driver's activity.
+ */
+ ugeth_quiesce(ugeth);
+ ugeth_disable(ugeth, COMM_DIR_RX_AND_TX);
+
+ out_be32(&ug_regs->maccfg2, tempval);
+ out_be32(&uf_regs->upsmr, upsmr);
+
+ ugeth_enable(ugeth, COMM_DIR_RX_AND_TX);
+ ugeth_activate(ugeth);
+ }
} else if (ugeth->oldlink) {
new_state = 1;
ugeth->oldlink = 0;
--
1.6.3.3
^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH 0/3] ucc_geth: Some more fixes
2009-12-24 15:30 [PATCH 0/3] ucc_geth: Some more fixes Anton Vorontsov
` (2 preceding siblings ...)
2009-12-24 15:31 ` [PATCH 3/3] ucc_geth: Don't needlessly change MAC settings in adjust_link() Anton Vorontsov
@ 2009-12-27 4:25 ` David Miller
3 siblings, 0 replies; 5+ messages in thread
From: David Miller @ 2009-12-27 4:25 UTC (permalink / raw)
To: avorontsov; +Cc: linuxppc-dev, netdev, lsorense
From: Anton Vorontsov <avorontsov@ru.mvista.com>
Date: Thu, 24 Dec 2009 18:30:34 +0300
> Here are some more fixes and one small enhancement for the ucc_geth
> driver.
All 3 patches applied, thanks a lot!
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2009-12-27 4:25 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2009-12-24 15:30 [PATCH 0/3] ucc_geth: Some more fixes Anton Vorontsov
2009-12-24 15:31 ` [PATCH 1/3] ucc_geth: Fix empty TX queue processing Anton Vorontsov
2009-12-24 15:31 ` [PATCH 2/3] ucc_geth: Fix netdev watchdog triggering on link changes Anton Vorontsov
2009-12-24 15:31 ` [PATCH 3/3] ucc_geth: Don't needlessly change MAC settings in adjust_link() Anton Vorontsov
2009-12-27 4:25 ` [PATCH 0/3] ucc_geth: Some more fixes David Miller
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).