[PATCH] powerpc/e5500: enable caam crypto driver by default

[PATCH] powerpc/e5500: enable caam crypto driver by default

[Kim Phillips]

e55xx based SoCs have SEC4 h/w, so enable the SEC4 driver,
caam, and the algorithms it supports, and disable the
SEC2/3 driver, talitos.

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
---
 arch/powerpc/configs/e55xx_smp_defconfig |    5 ++++-
 1 files changed, 4 insertions(+), 1 deletions(-)

diff --git a/arch/powerpc/configs/e55xx_smp_defconfig b/arch/powerpc/configs/e55xx_smp_defconfig
index d322835..c92c204 100644
--- a/arch/powerpc/configs/e55xx_smp_defconfig
+++ b/arch/powerpc/configs/e55xx_smp_defconfig
@@ -100,5 +100,8 @@ CONFIG_DEBUG_INFO=y
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_VIRQ_DEBUG=y
 CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_SHA256=y
+CONFIG_CRYPTO_SHA512=y
+CONFIG_CRYPTO_AES=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_DEV_TALITOS=y
+CONFIG_CRYPTO_DEV_FSL_CAAM=y
-- 
1.7.5.4

[PATCH v2] powerpc/85xx: enable caam crypto driver by default

[Kim Phillips]

corenet based SoCs have SEC4 h/w, so enable the SEC4 driver,
caam, and the algorithms it supports, and disable the
SEC2/3 driver, talitos.

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
---
v2: rebase from old e55xx_smp_defconfig file to new corenet & p1023
defconfigs

 arch/powerpc/configs/85xx/p1023rds_defconfig |    1 +
 arch/powerpc/configs/corenet32_smp_defconfig |    1 +
 arch/powerpc/configs/corenet64_smp_defconfig |    5 ++++-
 3 files changed, 6 insertions(+), 1 deletions(-)

diff --git a/arch/powerpc/configs/85xx/p1023rds_defconfig b/arch/powerpc/configs/85xx/p1023rds_defconfig
index 980ff8f..3ff5a81 100644
--- a/arch/powerpc/configs/85xx/p1023rds_defconfig
+++ b/arch/powerpc/configs/85xx/p1023rds_defconfig
@@ -171,3 +171,4 @@ CONFIG_CRYPTO_SHA256=y
 CONFIG_CRYPTO_SHA512=y
 CONFIG_CRYPTO_AES=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_DEV_FSL_CAAM=y
diff --git a/arch/powerpc/configs/corenet32_smp_defconfig b/arch/powerpc/configs/corenet32_smp_defconfig
index 10562a5..4311d02 100644
--- a/arch/powerpc/configs/corenet32_smp_defconfig
+++ b/arch/powerpc/configs/corenet32_smp_defconfig
@@ -185,3 +185,4 @@ CONFIG_CRYPTO_SHA256=y
 CONFIG_CRYPTO_SHA512=y
 CONFIG_CRYPTO_AES=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_DEV_FSL_CAAM=y
diff --git a/arch/powerpc/configs/corenet64_smp_defconfig b/arch/powerpc/configs/corenet64_smp_defconfig
index d322835..c92c204 100644
--- a/arch/powerpc/configs/corenet64_smp_defconfig
+++ b/arch/powerpc/configs/corenet64_smp_defconfig
@@ -100,5 +100,8 @@ CONFIG_DEBUG_INFO=y
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_VIRQ_DEBUG=y
 CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_SHA256=y
+CONFIG_CRYPTO_SHA512=y
+CONFIG_CRYPTO_AES=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_DEV_TALITOS=y
+CONFIG_CRYPTO_DEV_FSL_CAAM=y
-- 
1.7.6

Re: [PATCH v2] powerpc/85xx: enable caam crypto driver by default

[Kumar Gala]

On Jul 22, 2011, at 3:48 PM, Kim Phillips wrote:

> corenet based SoCs have SEC4 h/w, so enable the SEC4 driver,
> caam, and the algorithms it supports, and disable the
> SEC2/3 driver, talitos.
> 
> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
> ---
> v2: rebase from old e55xx_smp_defconfig file to new corenet & p1023
> defconfigs
> 
> arch/powerpc/configs/85xx/p1023rds_defconfig |    1 +
> arch/powerpc/configs/corenet32_smp_defconfig |    1 +
> arch/powerpc/configs/corenet64_smp_defconfig |    5 ++++-
> 3 files changed, 6 insertions(+), 1 deletions(-)

applied to merge

- k