From: Scott Wood <scottwood@freescale.com>
To: Dongsheng Wang <dongsheng.wang@freescale.com>
Cc: Bharat.Bhushan@freescale.com, linuxppc-dev@lists.ozlabs.org
Subject: Re: [v6,4/4] powerpc/85xx: add sysfs for pw20 state and altivec idle
Date: Thu, 9 Jan 2014 17:51:34 -0600 [thread overview]
Message-ID: <20140109235134.GA24262@home.buserror.net> (raw)
In-Reply-To: <1387268222-9703-4-git-send-email-dongsheng.wang@freescale.com>
On Tue, Dec 17, 2013 at 04:17:02PM +0800, Dongsheng Wang wrote:
> From: Wang Dongsheng <dongsheng.wang@freescale.com>
>
> Add a sys interface to enable/diable pw20 state or altivec idle, and
> control the wait entry time.
>
> Enable/Disable interface:
> 0, disable. 1, enable.
> /sys/devices/system/cpu/cpuX/pw20_state
> /sys/devices/system/cpu/cpuX/altivec_idle
>
> Set wait time interface:(Nanosecond)
> /sys/devices/system/cpu/cpuX/pw20_wait_time
> /sys/devices/system/cpu/cpuX/altivec_idle_wait_time
> Example: Base on TBfreq is 41MHZ.
> 1~48(ns): TB[63]
> 49~97(ns): TB[62]
> 98~195(ns): TB[61]
> 196~390(ns): TB[60]
> 391~780(ns): TB[59]
> 781~1560(ns): TB[58]
> ...
>
> Signed-off-by: Wang Dongsheng <dongsheng.wang@freescale.com>
This causes ppc6xx_defconfig to fail to build:
CC arch/powerpc/kernel/sysfs.o
/home/scott/fsl/git/linux/upstream/arch/powerpc/kernel/sysfs.c: In function 'show_pw20_state':
/home/scott/fsl/git/linux/upstream/arch/powerpc/kernel/sysfs.c:125:11: error: 'PWRMGTCR0_PW20_WAIT' undeclared (first use in this function)
/home/scott/fsl/git/linux/upstream/arch/powerpc/kernel/sysfs.c:125:11: note: each undeclared identifier is reported only once for each function it appears in
/home/scott/fsl/git/linux/upstream/arch/powerpc/kernel/sysfs.c: In function 'do_store_pw20_state':
/home/scott/fsl/git/linux/upstream/arch/powerpc/kernel/sysfs.c:138:17: error: 'PWRMGTCR0_PW20_WAIT' undeclared (first use in this function)
/home/scott/fsl/git/linux/upstream/arch/powerpc/kernel/sysfs.c: In function 'show_pw20_wait_time':
/home/scott/fsl/git/linux/upstream/arch/powerpc/kernel/sysfs.c:174:20: error: 'PWRMGTCR0_PW20_ENT' undeclared (first use in this function)
/home/scott/fsl/git/linux/upstream/arch/powerpc/kernel/sysfs.c:175:6: error: 'PWRMGTCR0_PW20_ENT_SHIFT' undeclared (first use in this function)
/home/scott/fsl/git/linux/upstream/arch/powerpc/kernel/sysfs.c: In function 'set_pw20_wait_entry_bit':
/home/scott/fsl/git/linux/upstream/arch/powerpc/kernel/sysfs.c:204:16: error: 'PWRMGTCR0_PW20_ENT' undeclared (first use in this function)
/home/scott/fsl/git/linux/upstream/arch/powerpc/kernel/sysfs.c:207:33: error: 'PWRMGTCR0_PW20_ENT_SHIFT' undeclared (first use in this function)
/home/scott/fsl/git/linux/upstream/arch/powerpc/kernel/sysfs.c: In function 'show_altivec_idle':
/home/scott/fsl/git/linux/upstream/arch/powerpc/kernel/sysfs.c:247:11: error: 'PWRMGTCR0_AV_IDLE_PD_EN' undeclared (first use in this function)
/home/scott/fsl/git/linux/upstream/arch/powerpc/kernel/sysfs.c: In function 'do_store_altivec_idle':
/home/scott/fsl/git/linux/upstream/arch/powerpc/kernel/sysfs.c:260:19: error: 'PWRMGTCR0_AV_IDLE_PD_EN' undeclared (first use in this function)
/home/scott/fsl/git/linux/upstream/arch/powerpc/kernel/sysfs.c: In function 'show_altivec_idle_wait_time':
/home/scott/fsl/git/linux/upstream/arch/powerpc/kernel/sysfs.c:296:20: error: 'PWRMGTCR0_AV_IDLE_CNT' undeclared (first use in this function)
/home/scott/fsl/git/linux/upstream/arch/powerpc/kernel/sysfs.c:297:6: error: 'PWRMGTCR0_AV_IDLE_CNT_SHIFT' undeclared (first use in this function)
/home/scott/fsl/git/linux/upstream/arch/powerpc/kernel/sysfs.c: In function 'set_altivec_idle_wait_entry_bit':
/home/scott/fsl/git/linux/upstream/arch/powerpc/kernel/sysfs.c:326:19: error: 'PWRMGTCR0_AV_IDLE_CNT' undeclared (first use in this function)
/home/scott/fsl/git/linux/upstream/arch/powerpc/kernel/sysfs.c:329:36: error: 'PWRMGTCR0_AV_IDLE_CNT_SHIFT' undeclared (first use in this function)
make[2]: *** [arch/powerpc/kernel/sysfs.o] Error 1
make[1]: *** [arch/powerpc/kernel] Error 2
make[1]: *** Waiting for unfinished jobs....
make: *** [sub-make] Error 2
I'll fix when applying with this:
diff --git a/arch/powerpc/kernel/sysfs.c b/arch/powerpc/kernel/sysfs.c
index 9af9e37..d4a43e6 100644
--- a/arch/powerpc/kernel/sysfs.c
+++ b/arch/powerpc/kernel/sysfs.c
@@ -86,7 +86,7 @@ __setup("smt-snooze-delay=", setup_smt_snooze_delay);
#endif /* CONFIG_PPC64 */
-#ifdef CONFIG_FSL_SOC
+#ifdef CONFIG_PPC_FSL_BOOK3E
#define MAX_BIT 63
static u64 pw20_wt;
@@ -723,7 +723,7 @@ static void register_cpu_online(unsigned int cpu)
device_create_file(s, &dev_attr_pir);
#endif /* CONFIG_PPC64 */
-#ifdef CONFIG_FSL_SOC
+#ifdef CONFIG_PPC_FSL_BOOK3E
if (PVR_VER(cur_cpu_spec->pvr_value) == PVR_VER_E6500) {
device_create_file(s, &dev_attr_pw20_state);
device_create_file(s, &dev_attr_pw20_wait_time);
@@ -804,7 +804,7 @@ static void unregister_cpu_online(unsigned int cpu)
device_remove_file(s, &dev_attr_pir);
#endif /* CONFIG_PPC64 */
-#ifdef CONFIG_FSL_SOC
+#ifdef CONFIG_PPC_FSL_BOOK3E
if (PVR_VER(cur_cpu_spec->pvr_value) == PVR_VER_E6500) {
device_remove_file(s, &dev_attr_pw20_state);
device_remove_file(s, &dev_attr_pw20_wait_time);
-Scott
next prev parent reply other threads:[~2014-01-09 23:51 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-12-17 8:16 [PATCH v6 1/4] powerpc/fsl: add E6500 PVR and SPRN_PWRMGTCR0 define Dongsheng Wang
2013-12-17 8:17 ` [PATCH v6 2/4] powerpc/85xx: add hardware automatically enter altivec idle state Dongsheng Wang
2013-12-17 8:17 ` [PATCH v6 3/4] powerpc/85xx: add hardware automatically enter pw20 state Dongsheng Wang
2013-12-17 8:17 ` [PATCH v6 4/4] powerpc/85xx: add sysfs for pw20 state and altivec idle Dongsheng Wang
2014-01-09 23:51 ` Scott Wood [this message]
2014-01-10 2:44 ` [v6,4/4] " Dongsheng.Wang
2013-12-30 2:37 ` [PATCH v6 1/4] powerpc/fsl: add E6500 PVR and SPRN_PWRMGTCR0 define Dongsheng.Wang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140109235134.GA24262@home.buserror.net \
--to=scottwood@freescale.com \
--cc=Bharat.Bhushan@freescale.com \
--cc=dongsheng.wang@freescale.com \
--cc=linuxppc-dev@lists.ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).