linuxppc-dev.lists.ozlabs.org archive mirror
 help / color / mirror / Atom feed
From: Nicholas Piggin <npiggin@gmail.com>
To: linuxppc-dev@lists.ozlabs.org
Cc: Nicholas Piggin <npiggin@gmail.com>,
	Michael Ellerman <mpe@ellerman.id.au>,
	Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>,
	Benjamin Herrenschmidt <benh@kernel.crashing.org>
Subject: [PATCH] powerpc/powernv: Fix opal entry/exit MSR_RI coverage
Date: Thu, 30 Mar 2017 22:10:04 +1000	[thread overview]
Message-ID: <20170330121004.11991-1-npiggin@gmail.com> (raw)

There are some windows in opal entry/exit that can not recover from a
re-entrant interrupt (e.g., machine check) due to using SRR registers,
but they currently do not have MSR_RI clear.

These were found by machine check injection coverage tests using the
powerpc system simulator (Mambo).

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
---
 arch/powerpc/boot/ppc_asm.h                    | 12 +++++++-----
 arch/powerpc/include/asm/ppc_asm.h             | 10 ++++++----
 arch/powerpc/platforms/powernv/opal-wrappers.S | 15 +++++++++------
 3 files changed, 22 insertions(+), 15 deletions(-)

diff --git a/arch/powerpc/boot/ppc_asm.h b/arch/powerpc/boot/ppc_asm.h
index b03373d8b386..68e388ee94fe 100644
--- a/arch/powerpc/boot/ppc_asm.h
+++ b/arch/powerpc/boot/ppc_asm.h
@@ -67,13 +67,15 @@
 #define MSR_LE		0x0000000000000001
 
 #define FIXUP_ENDIAN						   \
-	tdi   0, 0, 0x48; /* Reverse endian of b . + 8		*/ \
-	b     $+36;	  /* Skip trampoline if endian is good	*/ \
-	.long 0x05009f42; /* bcl 20,31,$+4			*/ \
-	.long 0xa602487d; /* mflr r10				*/ \
-	.long 0x1c004a39; /* addi r10,r10,28			*/ \
+	tdi   0,0,0x48;	  /* Reverse endian of b . + 8		*/ \
+	b     $+44;	  /* Skip trampoline if endian is good	*/ \
 	.long 0xa600607d; /* mfmsr r11				*/ \
 	.long 0x01006b69; /* xori r11,r11,1			*/ \
+	.long 0x00004039; /* li r10,0				*/ \
+	.long 0x6401417d; /* mtmsrd r10,1			*/ \
+	.long 0x05009f42; /* bcl 20,31,$+4			*/ \
+	.long 0xa602487d; /* mflr r10				*/ \
+	.long 0x14004a39; /* addi r10,r10,20			*/ \
 	.long 0xa6035a7d; /* mtsrr0 r10				*/ \
 	.long 0xa6037b7d; /* mtsrr1 r11				*/ \
 	.long 0x2400004c  /* rfid				*/
diff --git a/arch/powerpc/include/asm/ppc_asm.h b/arch/powerpc/include/asm/ppc_asm.h
index 359c44341761..9d47cba1da3f 100644
--- a/arch/powerpc/include/asm/ppc_asm.h
+++ b/arch/powerpc/include/asm/ppc_asm.h
@@ -770,12 +770,14 @@ END_FTR_SECTION_IFCLR(CPU_FTR_601)
 #else
 #define FIXUP_ENDIAN						   \
 	tdi   0,0,0x48;	  /* Reverse endian of b . + 8		*/ \
-	b     $+36;	  /* Skip trampoline if endian is good	*/ \
-	.long 0x05009f42; /* bcl 20,31,$+4			*/ \
-	.long 0xa602487d; /* mflr r10				*/ \
-	.long 0x1c004a39; /* addi r10,r10,28			*/ \
+	b     $+44;	  /* Skip trampoline if endian is good	*/ \
 	.long 0xa600607d; /* mfmsr r11				*/ \
 	.long 0x01006b69; /* xori r11,r11,1			*/ \
+	.long 0x00004039; /* li r10,0				*/ \
+	.long 0x6401417d; /* mtmsrd r10,1			*/ \
+	.long 0x05009f42; /* bcl 20,31,$+4			*/ \
+	.long 0xa602487d; /* mflr r10				*/ \
+	.long 0x14004a39; /* addi r10,r10,20			*/ \
 	.long 0xa6035a7d; /* mtsrr0 r10				*/ \
 	.long 0xa6037b7d; /* mtsrr1 r11				*/ \
 	.long 0x2400004c  /* rfid				*/
diff --git a/arch/powerpc/platforms/powernv/opal-wrappers.S b/arch/powerpc/platforms/powernv/opal-wrappers.S
index da8a0f7a035c..458109b1c291 100644
--- a/arch/powerpc/platforms/powernv/opal-wrappers.S
+++ b/arch/powerpc/platforms/powernv/opal-wrappers.S
@@ -67,15 +67,14 @@ END_FTR_SECTION(0, 1);						\
 	OPAL_BRANCH(opal_tracepoint_entry) \
 	mfcr	r11;			\
 	stw	r11,8(r1);		\
-	li	r11,0;			\
-	ori	r11,r11,MSR_EE;		\
 	std	r12,PACASAVEDMSR(r13);	\
-	andc	r12,r12,r11;		\
-	mtmsrd	r12,1;			\
 	LOAD_REG_ADDR(r11,opal_return);	\
 	mtlr	r11;			\
-	li	r11,MSR_DR|MSR_IR|MSR_LE;\
+	lis	r11,MSR_EE@h;		\
+	ori	r11,r11,MSR_DR|MSR_IR|MSR_LE;\
 	andc	r12,r12,r11;		\
+	li	r11,0;			\
+	mtmsrd	r11,1; /* EE=0 RI=0 */	\
 	mtspr	SPRN_HSRR1,r12;		\
 	LOAD_REG_ADDR(r11,opal);	\
 	ld	r12,8(r11);		\
@@ -95,9 +94,11 @@ opal_return:
 	lwz	r4,8(r1);
 	ld	r5,PPC_LR_STKOFF(r1);
 	ld	r6,PACASAVEDMSR(r13);
+	mtcr	r4;
+	li	r4,0;
+	mtmsrd	r4,1; /* EE=0 RI=0 */
 	mtspr	SPRN_SRR0,r5;
 	mtspr	SPRN_SRR1,r6;
-	mtcr	r4;
 	rfid
 
 opal_real_call:
@@ -108,6 +109,8 @@ opal_real_call:
 	mtlr	r11
 	li	r11,MSR_LE
 	andc	r12,r12,r11
+	li	r11,0;
+	mtmsrd	r11,1; /* EE=0 RI=0 */
 	mtspr	SPRN_HSRR1,r12
 	LOAD_REG_ADDR(r11,opal)
 	ld	r12,8(r11)
-- 
2.11.0

             reply	other threads:[~2017-03-30 12:10 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-03-30 12:10 Nicholas Piggin [this message]
2017-04-24  1:47 ` [PATCH] powerpc/powernv: Fix opal entry/exit MSR_RI coverage Benjamin Herrenschmidt
2017-04-24  4:55   ` Nicholas Piggin
2017-04-24  5:09     ` Benjamin Herrenschmidt
2017-04-24  5:18       ` Nicholas Piggin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170330121004.11991-1-npiggin@gmail.com \
    --to=npiggin@gmail.com \
    --cc=benh@kernel.crashing.org \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=mahesh@linux.vnet.ibm.com \
    --cc=mpe@ellerman.id.au \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).