[PATCH AUTOSEL 5.1 43/95] ibmvnic: Do not close unopened driver during reset

[PATCH AUTOSEL 5.1 43/95] ibmvnic: Do not close unopened driver during reset

[Sasha Levin]

From: Thomas Falcon <tlfalcon@linux.ibm.com>

[ Upstream commit 1f94608b0ce141be5286dde31270590bdf35b86a ]

Check driver state before halting it during a reset. If the driver is
not running, do nothing. Otherwise, a request to deactivate a down link
can cause an error and the reset will fail.

Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/ibm/ibmvnic.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/ibm/ibmvnic.c b/drivers/net/ethernet/ibm/ibmvnic.c
index 3dfb2d131eb7..71bf895409a1 100644
--- a/drivers/net/ethernet/ibm/ibmvnic.c
+++ b/drivers/net/ethernet/ibm/ibmvnic.c
@@ -1751,7 +1751,8 @@ static int do_reset(struct ibmvnic_adapter *adapter,
 
 	ibmvnic_cleanup(netdev);
 
-	if (adapter->reset_reason != VNIC_RESET_MOBILITY &&
+	if (reset_state == VNIC_OPEN &&
+	    adapter->reset_reason != VNIC_RESET_MOBILITY &&
 	    adapter->reset_reason != VNIC_RESET_FAILOVER) {
 		rc = __ibmvnic_close(netdev);
 		if (rc)
-- 
2.20.1

[PATCH AUTOSEL 5.1 44/95] ibmvnic: Refresh device multicast list after reset

[Sasha Levin]

From: Thomas Falcon <tlfalcon@linux.ibm.com>

[ Upstream commit be32a24372cf162e825332da1a7ccef058d4f20b ]

It was observed that multicast packets were no longer received after
a device reset.  The fix is to resend the current multicast list to
the backing device after recovery.

Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/ibm/ibmvnic.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/net/ethernet/ibm/ibmvnic.c b/drivers/net/ethernet/ibm/ibmvnic.c
index 71bf895409a1..664e52fa7919 100644
--- a/drivers/net/ethernet/ibm/ibmvnic.c
+++ b/drivers/net/ethernet/ibm/ibmvnic.c
@@ -1851,6 +1851,9 @@ static int do_reset(struct ibmvnic_adapter *adapter,
 		return 0;
 	}
 
+	/* refresh device's multicast list */
+	ibmvnic_set_multi(netdev);
+
 	/* kick napi */
 	for (i = 0; i < adapter->req_rx_queues; i++)
 		napi_schedule(&adapter->napi[i]);
-- 
2.20.1

[PATCH AUTOSEL 5.1 45/95] ibmvnic: Fix unchecked return codes of memory allocations

[Sasha Levin]

From: Thomas Falcon <tlfalcon@linux.ibm.com>

[ Upstream commit 7c940b1a5291e5069d561f5b8f0e51db6b7a259a ]

The return values for these memory allocations are unchecked,
which may cause an oops if the driver does not handle them after
a failure. Fix by checking the function's return code.

Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/ibm/ibmvnic.c | 13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ethernet/ibm/ibmvnic.c b/drivers/net/ethernet/ibm/ibmvnic.c
index 664e52fa7919..0e4029c54241 100644
--- a/drivers/net/ethernet/ibm/ibmvnic.c
+++ b/drivers/net/ethernet/ibm/ibmvnic.c
@@ -438,9 +438,10 @@ static int reset_rx_pools(struct ibmvnic_adapter *adapter)
 		if (rx_pool->buff_size != be64_to_cpu(size_array[i])) {
 			free_long_term_buff(adapter, &rx_pool->long_term_buff);
 			rx_pool->buff_size = be64_to_cpu(size_array[i]);
-			alloc_long_term_buff(adapter, &rx_pool->long_term_buff,
-					     rx_pool->size *
-					     rx_pool->buff_size);
+			rc = alloc_long_term_buff(adapter,
+						  &rx_pool->long_term_buff,
+						  rx_pool->size *
+						  rx_pool->buff_size);
 		} else {
 			rc = reset_long_term_buff(adapter,
 						  &rx_pool->long_term_buff);
@@ -706,9 +707,9 @@ static int init_tx_pools(struct net_device *netdev)
 			return rc;
 		}
 
-		init_one_tx_pool(netdev, &adapter->tso_pool[i],
-				 IBMVNIC_TSO_BUFS,
-				 IBMVNIC_TSO_BUF_SZ);
+		rc = init_one_tx_pool(netdev, &adapter->tso_pool[i],
+				      IBMVNIC_TSO_BUFS,
+				      IBMVNIC_TSO_BUF_SZ);
 		if (rc) {
 			release_tx_pools(adapter);
 			return rc;
-- 
2.20.1

[PATCH AUTOSEL 5.1 89/95] powerpc: enable a 30-bit ZONE_DMA for 32-bit pmac

[Sasha Levin]

From: Christoph Hellwig <hch@lst.de>

[ Upstream commit 9739ab7eda459f0669ec9807e0d9be5020bab88c ]

With the strict dma mask checking introduced with the switch to
the generic DMA direct code common wifi chips on 32-bit powerbooks
stopped working.  Add a 30-bit ZONE_DMA to the 32-bit pmac builds
to allow them to reliably allocate dma coherent memory.

Fixes: 65a21b71f948 ("powerpc/dma: remove dma_nommu_dma_supported")
Reported-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Larry Finger <Larry.Finger@lwfinger.net>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/include/asm/page.h         | 7 +++++++
 arch/powerpc/mm/mem.c                   | 3 ++-
 arch/powerpc/platforms/powermac/Kconfig | 1 +
 3 files changed, 10 insertions(+), 1 deletion(-)

diff --git a/arch/powerpc/include/asm/page.h b/arch/powerpc/include/asm/page.h
index ed870468ef6f..d408711d09fb 100644
--- a/arch/powerpc/include/asm/page.h
+++ b/arch/powerpc/include/asm/page.h
@@ -330,6 +330,13 @@ struct vm_area_struct;
 #endif /* __ASSEMBLY__ */
 #include <asm/slice.h>
 
+/*
+ * Allow 30-bit DMA for very limited Broadcom wifi chips on many powerbooks.
+ */
+#ifdef CONFIG_PPC32
+#define ARCH_ZONE_DMA_BITS 30
+#else
 #define ARCH_ZONE_DMA_BITS 31
+#endif
 
 #endif /* _ASM_POWERPC_PAGE_H */
diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c
index f6787f90e158..b98ce400a889 100644
--- a/arch/powerpc/mm/mem.c
+++ b/arch/powerpc/mm/mem.c
@@ -255,7 +255,8 @@ void __init paging_init(void)
 	       (long int)((top_of_ram - total_ram) >> 20));
 
 #ifdef CONFIG_ZONE_DMA
-	max_zone_pfns[ZONE_DMA]	= min(max_low_pfn, 0x7fffffffUL >> PAGE_SHIFT);
+	max_zone_pfns[ZONE_DMA]	= min(max_low_pfn,
+			((1UL << ARCH_ZONE_DMA_BITS) - 1) >> PAGE_SHIFT);
 #endif
 	max_zone_pfns[ZONE_NORMAL] = max_low_pfn;
 #ifdef CONFIG_HIGHMEM
diff --git a/arch/powerpc/platforms/powermac/Kconfig b/arch/powerpc/platforms/powermac/Kconfig
index f834a19ed772..c02d8c503b29 100644
--- a/arch/powerpc/platforms/powermac/Kconfig
+++ b/arch/powerpc/platforms/powermac/Kconfig
@@ -7,6 +7,7 @@ config PPC_PMAC
 	select PPC_INDIRECT_PCI if PPC32
 	select PPC_MPC106 if PPC32
 	select PPC_NATIVE
+	select ZONE_DMA if PPC32
 	default y
 
 config PPC_PMAC64
-- 
2.20.1