LinuxPPC-Dev Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH -next] soc: fsl: Enable COMPILE_TEST
@ 2019-11-08 13:02 YueHaibing
  2019-11-08 15:17 ` Alexandre Belloni
  0 siblings, 1 reply; 3+ messages in thread
From: YueHaibing @ 2019-11-08 13:02 UTC (permalink / raw)
  To: leoyang.li, alexandre.belloni
  Cc: YueHaibing, linuxppc-dev, linux-kernel, linux-arm-kernel

When do COMPILE_TEST buiding for RTC_DRV_FSL_FTM_ALARM,
we get this warning:

WARNING: unmet direct dependencies detected for FSL_RCPM
  Depends on [n]: PM_SLEEP [=y] && (ARM || ARM64)
  Selected by [m]:
  - RTC_DRV_FSL_FTM_ALARM [=m] && RTC_CLASS [=y] && (ARCH_LAYERSCAPE || SOC_LS1021A || COMPILE_TEST [=y])

This enable COMPILE_TEST for FSL_RCPM to fix the issue.

Fixes: e1c2feb1efa2 ("rtc: fsl-ftm-alarm: allow COMPILE_TEST")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
---
In commit c6c2d36bc46f ("rtc: fsl-ftm-alarm: Fix build error without PM_SLEEP")
I posted a wrong kconfig warning(which PM_SLEEP is n), sorry for confusion.
---
 drivers/soc/fsl/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/soc/fsl/Kconfig b/drivers/soc/fsl/Kconfig
index 4df32bc..e142662 100644
--- a/drivers/soc/fsl/Kconfig
+++ b/drivers/soc/fsl/Kconfig
@@ -43,7 +43,7 @@ config DPAA2_CONSOLE
 
 config FSL_RCPM
 	bool "Freescale RCPM support"
-	depends on PM_SLEEP && (ARM || ARM64)
+	depends on PM_SLEEP && (ARM || ARM64 || COMPILE_TEST)
 	help
 	  The NXP QorIQ Processors based on ARM Core have RCPM module
 	  (Run Control and Power Management), which performs all device-level
-- 
2.7.4



^ permalink raw reply	[flat|nested] 3+ messages in thread

end of thread, back to index

Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-11-08 13:02 [PATCH -next] soc: fsl: Enable COMPILE_TEST YueHaibing
2019-11-08 15:17 ` Alexandre Belloni
2019-11-08 20:59   ` Li Yang

LinuxPPC-Dev Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linuxppc-dev/0 linuxppc-dev/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linuxppc-dev linuxppc-dev/ https://lore.kernel.org/linuxppc-dev \
		linuxppc-dev@lists.ozlabs.org linuxppc-dev@ozlabs.org
	public-inbox-index linuxppc-dev

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.ozlabs.lists.linuxppc-dev


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git