[PATCH AUTOSEL 4.19 025/191] net: ibm: fix return type of ndo_start_xmit function

[PATCH AUTOSEL 4.19 025/191] net: ibm: fix return type of ndo_start_xmit function

[Sasha Levin]

From: YueHaibing <yuehaibing@huawei.com>

[ Upstream commit 94b2bb28dbb43fcb943d5275ab19fd5a4972bedb ]

The method ndo_start_xmit() is defined as returning an 'netdev_tx_t',
which is a typedef for an enum type, so make sure the implementation in
this driver has returns 'netdev_tx_t' value, and change the function
return type to netdev_tx_t.

Found by coccinelle.

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/ibm/ehea/ehea_main.c | 2 +-
 drivers/net/ethernet/ibm/emac/core.c      | 7 ++++---
 drivers/net/ethernet/ibm/ibmvnic.c        | 4 ++--
 3 files changed, 7 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ethernet/ibm/ehea/ehea_main.c b/drivers/net/ethernet/ibm/ehea/ehea_main.c
index 506f78322d741..e8ee69d4e4d34 100644
--- a/drivers/net/ethernet/ibm/ehea/ehea_main.c
+++ b/drivers/net/ethernet/ibm/ehea/ehea_main.c
@@ -2027,7 +2027,7 @@ static void ehea_xmit3(struct sk_buff *skb, struct net_device *dev,
 	dev_consume_skb_any(skb);
 }
 
-static int ehea_start_xmit(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t ehea_start_xmit(struct sk_buff *skb, struct net_device *dev)
 {
 	struct ehea_port *port = netdev_priv(dev);
 	struct ehea_swqe *swqe;
diff --git a/drivers/net/ethernet/ibm/emac/core.c b/drivers/net/ethernet/ibm/emac/core.c
index 129f4e9f38dac..a96f501813ff7 100644
--- a/drivers/net/ethernet/ibm/emac/core.c
+++ b/drivers/net/ethernet/ibm/emac/core.c
@@ -1409,7 +1409,7 @@ static inline u16 emac_tx_csum(struct emac_instance *dev,
 	return 0;
 }
 
-static inline int emac_xmit_finish(struct emac_instance *dev, int len)
+static inline netdev_tx_t emac_xmit_finish(struct emac_instance *dev, int len)
 {
 	struct emac_regs __iomem *p = dev->emacp;
 	struct net_device *ndev = dev->ndev;
@@ -1436,7 +1436,7 @@ static inline int emac_xmit_finish(struct emac_instance *dev, int len)
 }
 
 /* Tx lock BH */
-static int emac_start_xmit(struct sk_buff *skb, struct net_device *ndev)
+static netdev_tx_t emac_start_xmit(struct sk_buff *skb, struct net_device *ndev)
 {
 	struct emac_instance *dev = netdev_priv(ndev);
 	unsigned int len = skb->len;
@@ -1494,7 +1494,8 @@ static inline int emac_xmit_split(struct emac_instance *dev, int slot,
 }
 
 /* Tx lock BH disabled (SG version for TAH equipped EMACs) */
-static int emac_start_xmit_sg(struct sk_buff *skb, struct net_device *ndev)
+static netdev_tx_t
+emac_start_xmit_sg(struct sk_buff *skb, struct net_device *ndev)
 {
 	struct emac_instance *dev = netdev_priv(ndev);
 	int nr_frags = skb_shinfo(skb)->nr_frags;
diff --git a/drivers/net/ethernet/ibm/ibmvnic.c b/drivers/net/ethernet/ibm/ibmvnic.c
index 8fa14736449bc..8a1916443235a 100644
--- a/drivers/net/ethernet/ibm/ibmvnic.c
+++ b/drivers/net/ethernet/ibm/ibmvnic.c
@@ -1420,7 +1420,7 @@ static int ibmvnic_xmit_workarounds(struct sk_buff *skb,
 	return 0;
 }
 
-static int ibmvnic_xmit(struct sk_buff *skb, struct net_device *netdev)
+static netdev_tx_t ibmvnic_xmit(struct sk_buff *skb, struct net_device *netdev)
 {
 	struct ibmvnic_adapter *adapter = netdev_priv(netdev);
 	int queue_num = skb_get_queue_mapping(skb);
@@ -1444,7 +1444,7 @@ static int ibmvnic_xmit(struct sk_buff *skb, struct net_device *netdev)
 	u64 *handle_array;
 	int index = 0;
 	u8 proto = 0;
-	int ret = 0;
+	netdev_tx_t ret = NETDEV_TX_OK;
 
 	if (adapter->resetting) {
 		if (!netif_subqueue_stopped(netdev, skb))
-- 
2.20.1

[PATCH AUTOSEL 4.19 026/191] powerpc/iommu: Avoid derefence before pointer check

[Sasha Levin]

From: Breno Leitao <leitao@debian.org>

[ Upstream commit 984ecdd68de0fa1f63ce205d6c19ef5a7bc67b40 ]

The tbl pointer is being derefenced by IOMMU_PAGE_SIZE prior the check
if it is not NULL.

Just moving the dereference code to after the check, where there will
be guarantee that 'tbl' will not be NULL.

Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/kernel/iommu.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/powerpc/kernel/iommu.c b/arch/powerpc/kernel/iommu.c
index 19b4c628f3bec..f0dc680e659af 100644
--- a/arch/powerpc/kernel/iommu.c
+++ b/arch/powerpc/kernel/iommu.c
@@ -785,9 +785,9 @@ dma_addr_t iommu_map_page(struct device *dev, struct iommu_table *tbl,
 
 	vaddr = page_address(page) + offset;
 	uaddr = (unsigned long)vaddr;
-	npages = iommu_num_pages(uaddr, size, IOMMU_PAGE_SIZE(tbl));
 
 	if (tbl) {
+		npages = iommu_num_pages(uaddr, size, IOMMU_PAGE_SIZE(tbl));
 		align = 0;
 		if (tbl->it_page_shift < PAGE_SHIFT && size >= PAGE_SIZE &&
 		    ((unsigned long)vaddr & ~PAGE_MASK) == 0)
-- 
2.20.1

[PATCH AUTOSEL 4.19 027/191] selftests/powerpc: Do not fail with reschedule

[Sasha Levin]

From: Breno Leitao <leitao@debian.org>

[ Upstream commit 44d947eff19d64384efc06069509db7a0a1103b0 ]

There are cases where the test is not expecting to have the transaction
aborted, but, the test process might have been rescheduled, either in the
OS level or by KVM (if it is running on a KVM guest machine). The process
reschedule will cause a treclaim/recheckpoint which will cause the
transaction to doom, aborting the transaction as soon as the process is
rescheduled back to the CPU. This might cause the test to fail, but this is
not a failure in essence.

If that is the case, TEXASR[FC] is indicated with either
TM_CAUSE_RESCHEDULE or TM_CAUSE_KVM_RESCHEDULE for KVM interruptions.

In this scenario, ignore these two failures and avoid the whole test to
return failure.

Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Gustavo Romero <gromero@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/powerpc/tm/tm-unavailable.c | 9 ++++++---
 tools/testing/selftests/powerpc/tm/tm.h             | 9 +++++++++
 2 files changed, 15 insertions(+), 3 deletions(-)

diff --git a/tools/testing/selftests/powerpc/tm/tm-unavailable.c b/tools/testing/selftests/powerpc/tm/tm-unavailable.c
index 156c8e750259b..09894f4ff62e6 100644
--- a/tools/testing/selftests/powerpc/tm/tm-unavailable.c
+++ b/tools/testing/selftests/powerpc/tm/tm-unavailable.c
@@ -236,7 +236,8 @@ void *tm_una_ping(void *input)
 	}
 
 	/* Check if we were not expecting a failure and a it occurred. */
-	if (!expecting_failure() && is_failure(cr_)) {
+	if (!expecting_failure() && is_failure(cr_) &&
+	    !failure_is_reschedule()) {
 		printf("\n\tUnexpected transaction failure 0x%02lx\n\t",
 			failure_code());
 		return (void *) -1;
@@ -244,9 +245,11 @@ void *tm_una_ping(void *input)
 
 	/*
 	 * Check if TM failed due to the cause we were expecting. 0xda is a
-	 * TM_CAUSE_FAC_UNAV cause, otherwise it's an unexpected cause.
+	 * TM_CAUSE_FAC_UNAV cause, otherwise it's an unexpected cause, unless
+	 * it was caused by a reschedule.
 	 */
-	if (is_failure(cr_) && !failure_is_unavailable()) {
+	if (is_failure(cr_) && !failure_is_unavailable() &&
+	    !failure_is_reschedule()) {
 		printf("\n\tUnexpected failure cause 0x%02lx\n\t",
 			failure_code());
 		return (void *) -1;
diff --git a/tools/testing/selftests/powerpc/tm/tm.h b/tools/testing/selftests/powerpc/tm/tm.h
index df4204247d45c..5518b1d4ef8b2 100644
--- a/tools/testing/selftests/powerpc/tm/tm.h
+++ b/tools/testing/selftests/powerpc/tm/tm.h
@@ -52,6 +52,15 @@ static inline bool failure_is_unavailable(void)
 	return (failure_code() & TM_CAUSE_FAC_UNAV) == TM_CAUSE_FAC_UNAV;
 }
 
+static inline bool failure_is_reschedule(void)
+{
+	if ((failure_code() & TM_CAUSE_RESCHED) == TM_CAUSE_RESCHED ||
+	    (failure_code() & TM_CAUSE_KVM_RESCHED) == TM_CAUSE_KVM_RESCHED)
+		return true;
+
+	return false;
+}
+
 static inline bool failure_is_nesting(void)
 {
 	return (__builtin_get_texasru() & 0x400000);
-- 
2.20.1

[PATCH AUTOSEL 4.19 028/191] powerpc/64s/hash: Fix stab_rr off by one initialization

[Sasha Levin]

From: Nicholas Piggin <npiggin@gmail.com>

[ Upstream commit 09b4438db13fa83b6219aee5993711a2aa2a0c64 ]

This causes SLB alloation to start 1 beyond the start of the SLB.
There is no real problem because after it wraps it stats behaving
properly, it's just surprisig to see when looking at SLB traces.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/mm/slb.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/powerpc/mm/slb.c b/arch/powerpc/mm/slb.c
index 9f574e59d1786..2f162c6e52d4f 100644
--- a/arch/powerpc/mm/slb.c
+++ b/arch/powerpc/mm/slb.c
@@ -355,7 +355,7 @@ void slb_initialize(void)
 #endif
 	}
 
-	get_paca()->stab_rr = SLB_NUM_BOLTED;
+	get_paca()->stab_rr = SLB_NUM_BOLTED - 1;
 
 	lflags = SLB_VSID_KERNEL | linear_llp;
 	vflags = SLB_VSID_KERNEL | vmalloc_llp;
-- 
2.20.1

[PATCH AUTOSEL 4.19 029/191] powerpc/pseries/memory-hotplug: Only update DT once per memory DLPAR request

[Sasha Levin]

From: Nathan Fontenot <nfont@linux.vnet.ibm.com>

[ Upstream commit 063b8b1251fd069f3740339fca56119d218f11ba ]

The updates to powerpc numa and memory hotplug code now use the
in-kernel LMB array instead of the device tree. This change allows the
pseries memory DLPAR code to only update the device tree once after
successfully handling a DLPAR request.

Prior to the in-kernel LMB array, the numa code looked up the affinity
for memory being added in the device tree, the code now looks this up
in the LMB array. This change means the memory hotplug code can just
update the affinity for an LMB in the LMB array instead of updating
the device tree.

This also provides a savings in kernel memory. When updating the
device tree old properties are never free'ed since there is no
usecount on properties. This behavior leads to a new copy of the
property being allocated every time a LMB is added or removed (i.e. a
request to add 100 LMBs creates 100 new copies of the property). With
this update only a single new property is created when a DLPAR request
completes successfully.

Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/include/asm/drmem.h              |  5 ++
 .../platforms/pseries/hotplug-memory.c        | 55 ++++++-------------
 2 files changed, 21 insertions(+), 39 deletions(-)

diff --git a/arch/powerpc/include/asm/drmem.h b/arch/powerpc/include/asm/drmem.h
index ce242b9ea8c67..7c1d8e74b25d4 100644
--- a/arch/powerpc/include/asm/drmem.h
+++ b/arch/powerpc/include/asm/drmem.h
@@ -99,4 +99,9 @@ void __init walk_drmem_lmbs_early(unsigned long node,
 			void (*func)(struct drmem_lmb *, const __be32 **));
 #endif
 
+static inline void invalidate_lmb_associativity_index(struct drmem_lmb *lmb)
+{
+	lmb->aa_index = 0xffffffff;
+}
+
 #endif /* _ASM_POWERPC_LMB_H */
diff --git a/arch/powerpc/platforms/pseries/hotplug-memory.c b/arch/powerpc/platforms/pseries/hotplug-memory.c
index f99cd31b6fd1a..2f166136bb50a 100644
--- a/arch/powerpc/platforms/pseries/hotplug-memory.c
+++ b/arch/powerpc/platforms/pseries/hotplug-memory.c
@@ -163,7 +163,7 @@ static u32 find_aa_index(struct device_node *dr_node,
 	return aa_index;
 }
 
-static u32 lookup_lmb_associativity_index(struct drmem_lmb *lmb)
+static int update_lmb_associativity_index(struct drmem_lmb *lmb)
 {
 	struct device_node *parent, *lmb_node, *dr_node;
 	struct property *ala_prop;
@@ -203,43 +203,14 @@ static u32 lookup_lmb_associativity_index(struct drmem_lmb *lmb)
 	aa_index = find_aa_index(dr_node, ala_prop, lmb_assoc);
 
 	dlpar_free_cc_nodes(lmb_node);
-	return aa_index;
-}
-
-static int dlpar_add_device_tree_lmb(struct drmem_lmb *lmb)
-{
-	int rc, aa_index;
-
-	lmb->flags |= DRCONF_MEM_ASSIGNED;
 
-	aa_index = lookup_lmb_associativity_index(lmb);
 	if (aa_index < 0) {
-		pr_err("Couldn't find associativity index for drc index %x\n",
-		       lmb->drc_index);
-		return aa_index;
+		pr_err("Could not find LMB associativity\n");
+		return -1;
 	}
 
 	lmb->aa_index = aa_index;
-
-	rtas_hp_event = true;
-	rc = drmem_update_dt();
-	rtas_hp_event = false;
-
-	return rc;
-}
-
-static int dlpar_remove_device_tree_lmb(struct drmem_lmb *lmb)
-{
-	int rc;
-
-	lmb->flags &= ~DRCONF_MEM_ASSIGNED;
-	lmb->aa_index = 0xffffffff;
-
-	rtas_hp_event = true;
-	rc = drmem_update_dt();
-	rtas_hp_event = false;
-
-	return rc;
+	return 0;
 }
 
 static struct memory_block *lmb_to_memblock(struct drmem_lmb *lmb)
@@ -431,7 +402,9 @@ static int dlpar_remove_lmb(struct drmem_lmb *lmb)
 	/* Update memory regions for memory remove */
 	memblock_remove(lmb->base_addr, block_sz);
 
-	dlpar_remove_device_tree_lmb(lmb);
+	invalidate_lmb_associativity_index(lmb);
+	lmb->flags &= ~DRCONF_MEM_ASSIGNED;
+
 	return 0;
 }
 
@@ -691,10 +664,8 @@ static int dlpar_add_lmb(struct drmem_lmb *lmb)
 	if (lmb->flags & DRCONF_MEM_ASSIGNED)
 		return -EINVAL;
 
-	rc = dlpar_add_device_tree_lmb(lmb);
+	rc = update_lmb_associativity_index(lmb);
 	if (rc) {
-		pr_err("Couldn't update device tree for drc index %x\n",
-		       lmb->drc_index);
 		dlpar_release_drc(lmb->drc_index);
 		return rc;
 	}
@@ -707,14 +678,14 @@ static int dlpar_add_lmb(struct drmem_lmb *lmb)
 	/* Add the memory */
 	rc = add_memory(nid, lmb->base_addr, block_sz);
 	if (rc) {
-		dlpar_remove_device_tree_lmb(lmb);
+		invalidate_lmb_associativity_index(lmb);
 		return rc;
 	}
 
 	rc = dlpar_online_lmb(lmb);
 	if (rc) {
 		remove_memory(nid, lmb->base_addr, block_sz);
-		dlpar_remove_device_tree_lmb(lmb);
+		invalidate_lmb_associativity_index(lmb);
 	} else {
 		lmb->flags |= DRCONF_MEM_ASSIGNED;
 	}
@@ -961,6 +932,12 @@ int dlpar_memory(struct pseries_hp_errorlog *hp_elog)
 		break;
 	}
 
+	if (!rc) {
+		rtas_hp_event = true;
+		rc = drmem_update_dt();
+		rtas_hp_event = false;
+	}
+
 	unlock_device_hotplug();
 	return rc;
 }
-- 
2.20.1

[PATCH AUTOSEL 4.19 030/191] powerpc/pseries: Disable CPU hotplug across migrations

[Sasha Levin]

From: Nathan Fontenot <nfont@linux.vnet.ibm.com>

[ Upstream commit 85a88cabad57d26d826dd94ea34d3a785824d802 ]

When performing partition migrations all present CPUs must be online
as all present CPUs must make the H_JOIN call as part of the migration
process. Once all present CPUs make the H_JOIN call, one CPU is returned
to make the rtas call to perform the migration to the destination system.

During testing of migration and changing the SMT state we have found
instances where CPUs are offlined, as part of the SMT state change,
before they make the H_JOIN call. This results in a hung system where
every CPU is either in H_JOIN or offline.

To prevent this this patch disables CPU hotplug during the migration
process.

Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Reviewed-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/kernel/rtas.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/powerpc/kernel/rtas.c b/arch/powerpc/kernel/rtas.c
index 9e41a9de43235..95d1264ba7952 100644
--- a/arch/powerpc/kernel/rtas.c
+++ b/arch/powerpc/kernel/rtas.c
@@ -985,6 +985,7 @@ int rtas_ibm_suspend_me(u64 handle)
 		goto out;
 	}
 
+	cpu_hotplug_disable();
 	stop_topology_update();
 
 	/* Call function on all CPUs.  One of us will make the
@@ -999,6 +1000,7 @@ int rtas_ibm_suspend_me(u64 handle)
 		printk(KERN_ERR "Error doing global join\n");
 
 	start_topology_update();
+	cpu_hotplug_enable();
 
 	/* Take down CPUs not online prior to suspend */
 	cpuret = rtas_offline_cpus_mask(offline_mask);
-- 
2.20.1

[PATCH AUTOSEL 4.19 031/191] powerpc: Fix duplicate const clang warning in user access code

[Sasha Levin]

From: Anton Blanchard <anton@samba.org>

[ Upstream commit e00d93ac9a189673028ac125a74b9bc8ae73eebc ]

This re-applies commit b91c1e3e7a6f ("powerpc: Fix duplicate const
clang warning in user access code") (Jun 2015) which was undone in
commits:
  f2ca80905929 ("powerpc/sparse: Constify the address pointer in __get_user_nosleep()") (Feb 2017)
  d466f6c5cac1 ("powerpc/sparse: Constify the address pointer in __get_user_nocheck()") (Feb 2017)
  f84ed59a612d ("powerpc/sparse: Constify the address pointer in __get_user_check()") (Feb 2017)

We see a large number of duplicate const errors in the user access
code when building with llvm/clang:

  include/linux/pagemap.h:576:8: warning: duplicate 'const' declaration specifier [-Wduplicate-decl-specifier]
        ret = __get_user(c, uaddr);

The problem is we are doing const __typeof__(*(ptr)), which will hit
the warning if ptr is marked const.

Removing const does not seem to have any effect on GCC code
generation.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/include/asm/uaccess.h | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/powerpc/include/asm/uaccess.h b/arch/powerpc/include/asm/uaccess.h
index 1ca9e37f7cc99..38a25ff8afb76 100644
--- a/arch/powerpc/include/asm/uaccess.h
+++ b/arch/powerpc/include/asm/uaccess.h
@@ -260,7 +260,7 @@ do {								\
 ({								\
 	long __gu_err;						\
 	__long_type(*(ptr)) __gu_val;				\
-	const __typeof__(*(ptr)) __user *__gu_addr = (ptr);	\
+	__typeof__(*(ptr)) __user *__gu_addr = (ptr);	\
 	__chk_user_ptr(ptr);					\
 	if (!is_kernel_addr((unsigned long)__gu_addr))		\
 		might_fault();					\
@@ -274,7 +274,7 @@ do {								\
 ({									\
 	long __gu_err = -EFAULT;					\
 	__long_type(*(ptr)) __gu_val = 0;				\
-	const __typeof__(*(ptr)) __user *__gu_addr = (ptr);		\
+	__typeof__(*(ptr)) __user *__gu_addr = (ptr);		\
 	might_fault();							\
 	if (access_ok(VERIFY_READ, __gu_addr, (size))) {		\
 		barrier_nospec();					\
@@ -288,7 +288,7 @@ do {								\
 ({								\
 	long __gu_err;						\
 	__long_type(*(ptr)) __gu_val;				\
-	const __typeof__(*(ptr)) __user *__gu_addr = (ptr);	\
+	__typeof__(*(ptr)) __user *__gu_addr = (ptr);	\
 	__chk_user_ptr(ptr);					\
 	barrier_nospec();					\
 	__get_user_size(__gu_val, __gu_addr, (size), __gu_err);	\
-- 
2.20.1

[PATCH AUTOSEL 4.19 036/191] libfdt: Ensure INT_MAX is defined in libfdt_env.h

[Sasha Levin]

From: Rob Herring <robh@kernel.org>

[ Upstream commit 53dd9dce6979bc54d64a3a09a2fb20187a025be7 ]

The next update of libfdt has a new dependency on INT_MAX. Update the
instances of libfdt_env.h in the kernel to either include the necessary
header with the definition or define it locally.

Cc: Russell King <linux@armlinux.org.uk>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/compressed/libfdt_env.h | 2 ++
 arch/powerpc/boot/libfdt_env.h        | 2 ++
 include/linux/libfdt_env.h            | 1 +
 3 files changed, 5 insertions(+)

diff --git a/arch/arm/boot/compressed/libfdt_env.h b/arch/arm/boot/compressed/libfdt_env.h
index 07437816e0986..b36c0289a308e 100644
--- a/arch/arm/boot/compressed/libfdt_env.h
+++ b/arch/arm/boot/compressed/libfdt_env.h
@@ -6,6 +6,8 @@
 #include <linux/string.h>
 #include <asm/byteorder.h>
 
+#define INT_MAX			((int)(~0U>>1))
+
 typedef __be16 fdt16_t;
 typedef __be32 fdt32_t;
 typedef __be64 fdt64_t;
diff --git a/arch/powerpc/boot/libfdt_env.h b/arch/powerpc/boot/libfdt_env.h
index 2a0c8b1bf1479..2abc8e83b95e9 100644
--- a/arch/powerpc/boot/libfdt_env.h
+++ b/arch/powerpc/boot/libfdt_env.h
@@ -5,6 +5,8 @@
 #include <types.h>
 #include <string.h>
 
+#define INT_MAX			((int)(~0U>>1))
+
 #include "of.h"
 
 typedef unsigned long uintptr_t;
diff --git a/include/linux/libfdt_env.h b/include/linux/libfdt_env.h
index c6ac1fe7ec68a..edb0f0c309044 100644
--- a/include/linux/libfdt_env.h
+++ b/include/linux/libfdt_env.h
@@ -2,6 +2,7 @@
 #ifndef LIBFDT_ENV_H
 #define LIBFDT_ENV_H
 
+#include <linux/kernel.h>	/* For INT_MAX */
 #include <linux/string.h>
 
 #include <asm/byteorder.h>
-- 
2.20.1

[PATCH AUTOSEL 4.19 041/191] net: toshiba: fix return type of ndo_start_xmit function

[Sasha Levin]

From: YueHaibing <yuehaibing@huawei.com>

[ Upstream commit bacade822524e02f662d88f784d2ae821a5546fb ]

The method ndo_start_xmit() is defined as returning an 'netdev_tx_t',
which is a typedef for an enum type, so make sure the implementation in
this driver has returns 'netdev_tx_t' value, and change the function
return type to netdev_tx_t.

Found by coccinelle.

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/toshiba/ps3_gelic_net.c | 4 ++--
 drivers/net/ethernet/toshiba/ps3_gelic_net.h | 2 +-
 drivers/net/ethernet/toshiba/spider_net.c    | 4 ++--
 drivers/net/ethernet/toshiba/tc35815.c       | 6 ++++--
 4 files changed, 9 insertions(+), 7 deletions(-)

diff --git a/drivers/net/ethernet/toshiba/ps3_gelic_net.c b/drivers/net/ethernet/toshiba/ps3_gelic_net.c
index 88d74aef218a2..75237c81c63d6 100644
--- a/drivers/net/ethernet/toshiba/ps3_gelic_net.c
+++ b/drivers/net/ethernet/toshiba/ps3_gelic_net.c
@@ -845,9 +845,9 @@ static int gelic_card_kick_txdma(struct gelic_card *card,
  * @skb: packet to send out
  * @netdev: interface device structure
  *
- * returns 0 on success, <0 on failure
+ * returns NETDEV_TX_OK on success, NETDEV_TX_BUSY on failure
  */
-int gelic_net_xmit(struct sk_buff *skb, struct net_device *netdev)
+netdev_tx_t gelic_net_xmit(struct sk_buff *skb, struct net_device *netdev)
 {
 	struct gelic_card *card = netdev_card(netdev);
 	struct gelic_descr *descr;
diff --git a/drivers/net/ethernet/toshiba/ps3_gelic_net.h b/drivers/net/ethernet/toshiba/ps3_gelic_net.h
index 003d0452d9cb1..fbbf9b54b173b 100644
--- a/drivers/net/ethernet/toshiba/ps3_gelic_net.h
+++ b/drivers/net/ethernet/toshiba/ps3_gelic_net.h
@@ -370,7 +370,7 @@ void gelic_card_up(struct gelic_card *card);
 void gelic_card_down(struct gelic_card *card);
 int gelic_net_open(struct net_device *netdev);
 int gelic_net_stop(struct net_device *netdev);
-int gelic_net_xmit(struct sk_buff *skb, struct net_device *netdev);
+netdev_tx_t gelic_net_xmit(struct sk_buff *skb, struct net_device *netdev);
 void gelic_net_set_multi(struct net_device *netdev);
 void gelic_net_tx_timeout(struct net_device *netdev);
 int gelic_net_setup_netdev(struct net_device *netdev, struct gelic_card *card);
diff --git a/drivers/net/ethernet/toshiba/spider_net.c b/drivers/net/ethernet/toshiba/spider_net.c
index d925b82039966..23417266b7ecc 100644
--- a/drivers/net/ethernet/toshiba/spider_net.c
+++ b/drivers/net/ethernet/toshiba/spider_net.c
@@ -880,9 +880,9 @@ spider_net_kick_tx_dma(struct spider_net_card *card)
  * @skb: packet to send out
  * @netdev: interface device structure
  *
- * returns 0 on success, !0 on failure
+ * returns NETDEV_TX_OK on success, NETDEV_TX_BUSY on failure
  */
-static int
+static netdev_tx_t
 spider_net_xmit(struct sk_buff *skb, struct net_device *netdev)
 {
 	int cnt;
diff --git a/drivers/net/ethernet/toshiba/tc35815.c b/drivers/net/ethernet/toshiba/tc35815.c
index 9146068979d2c..03afc4d8c3ec1 100644
--- a/drivers/net/ethernet/toshiba/tc35815.c
+++ b/drivers/net/ethernet/toshiba/tc35815.c
@@ -474,7 +474,8 @@ static void free_rxbuf_skb(struct pci_dev *hwdev, struct sk_buff *skb, dma_addr_
 /* Index to functions, as function prototypes. */
 
 static int	tc35815_open(struct net_device *dev);
-static int	tc35815_send_packet(struct sk_buff *skb, struct net_device *dev);
+static netdev_tx_t	tc35815_send_packet(struct sk_buff *skb,
+					    struct net_device *dev);
 static irqreturn_t	tc35815_interrupt(int irq, void *dev_id);
 static int	tc35815_rx(struct net_device *dev, int limit);
 static int	tc35815_poll(struct napi_struct *napi, int budget);
@@ -1248,7 +1249,8 @@ tc35815_open(struct net_device *dev)
  * invariant will hold if you make sure that the netif_*_queue()
  * calls are done at the proper times.
  */
-static int tc35815_send_packet(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t
+tc35815_send_packet(struct sk_buff *skb, struct net_device *dev)
 {
 	struct tc35815_local *lp = netdev_priv(dev);
 	struct TxFD *txfd;
-- 
2.20.1

[PATCH AUTOSEL 4.19 061/191] PCI: portdrv: Initialize service drivers directly

[Sasha Levin]

From: Keith Busch <keith.busch@intel.com>

[ Upstream commit c29de84149aba5f74e87b6491c13ac7203c12f55 ]

The PCI port driver saves the PCI state after initializing the device with
the applicable service devices.  This was, however, before the service
drivers were even registered because PCI probe happens before the
device_initcall initialized those service drivers.  The config space state
that the services set up were not being saved.  The end result would cause
PCI devices to not react to events that the drivers think they did if the
PCI state ever needed to be restored.

Fix this by changing the service drivers from using the init calls to
having the portdrv driver calling the services directly.  This will get the
state saved as desired, while making the relationship between the port
driver and the services under it more explicit in the code.

Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Sinan Kaya <okaya@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/hotplug/pciehp_core.c |  3 +--
 drivers/pci/pcie/aer.c            |  3 +--
 drivers/pci/pcie/dpc.c            |  3 +--
 drivers/pci/pcie/pme.c            |  3 +--
 drivers/pci/pcie/portdrv.h        | 24 ++++++++++++++++++++++++
 drivers/pci/pcie/portdrv_pci.c    |  9 +++++++++
 6 files changed, 37 insertions(+), 8 deletions(-)

diff --git a/drivers/pci/hotplug/pciehp_core.c b/drivers/pci/hotplug/pciehp_core.c
index ec48c9433ae50..518c46f8e63b7 100644
--- a/drivers/pci/hotplug/pciehp_core.c
+++ b/drivers/pci/hotplug/pciehp_core.c
@@ -348,7 +348,7 @@ static struct pcie_port_service_driver hpdriver_portdrv = {
 #endif	/* PM */
 };
 
-static int __init pcied_init(void)
+int __init pcie_hp_init(void)
 {
 	int retval = 0;
 
@@ -359,4 +359,3 @@ static int __init pcied_init(void)
 
 	return retval;
 }
-device_initcall(pcied_init);
diff --git a/drivers/pci/pcie/aer.c b/drivers/pci/pcie/aer.c
index 83180edd6ed47..637d638f73da5 100644
--- a/drivers/pci/pcie/aer.c
+++ b/drivers/pci/pcie/aer.c
@@ -1569,10 +1569,9 @@ static struct pcie_port_service_driver aerdriver = {
  *
  * Invoked when AER root service driver is loaded.
  */
-static int __init aer_service_init(void)
+int __init pcie_aer_init(void)
 {
 	if (!pci_aer_available() || aer_acpi_firmware_first())
 		return -ENXIO;
 	return pcie_port_service_register(&aerdriver);
 }
-device_initcall(aer_service_init);
diff --git a/drivers/pci/pcie/dpc.c b/drivers/pci/pcie/dpc.c
index 1908dd2978d3c..118b5bcae42ea 100644
--- a/drivers/pci/pcie/dpc.c
+++ b/drivers/pci/pcie/dpc.c
@@ -307,8 +307,7 @@ static struct pcie_port_service_driver dpcdriver = {
 	.reset_link	= dpc_reset_link,
 };
 
-static int __init dpc_service_init(void)
+int __init pcie_dpc_init(void)
 {
 	return pcie_port_service_register(&dpcdriver);
 }
-device_initcall(dpc_service_init);
diff --git a/drivers/pci/pcie/pme.c b/drivers/pci/pcie/pme.c
index 6ac17f0c40775..54d593d10396f 100644
--- a/drivers/pci/pcie/pme.c
+++ b/drivers/pci/pcie/pme.c
@@ -455,8 +455,7 @@ static struct pcie_port_service_driver pcie_pme_driver = {
 /**
  * pcie_pme_service_init - Register the PCIe PME service driver.
  */
-static int __init pcie_pme_service_init(void)
+int __init pcie_pme_init(void)
 {
 	return pcie_port_service_register(&pcie_pme_driver);
 }
-device_initcall(pcie_pme_service_init);
diff --git a/drivers/pci/pcie/portdrv.h b/drivers/pci/pcie/portdrv.h
index d59afa42fc14b..2498b2d340095 100644
--- a/drivers/pci/pcie/portdrv.h
+++ b/drivers/pci/pcie/portdrv.h
@@ -23,6 +23,30 @@
 
 #define PCIE_PORT_DEVICE_MAXSERVICES   4
 
+#ifdef CONFIG_PCIEAER
+int pcie_aer_init(void);
+#else
+static inline int pcie_aer_init(void) { return 0; }
+#endif
+
+#ifdef CONFIG_HOTPLUG_PCI_PCIE
+int pcie_hp_init(void);
+#else
+static inline int pcie_hp_init(void) { return 0; }
+#endif
+
+#ifdef CONFIG_PCIE_PME
+int pcie_pme_init(void);
+#else
+static inline int pcie_pme_init(void) { return 0; }
+#endif
+
+#ifdef CONFIG_PCIE_DPC
+int pcie_dpc_init(void);
+#else
+static inline int pcie_dpc_init(void) { return 0; }
+#endif
+
 /* Port Type */
 #define PCIE_ANY_PORT			(~0)
 
diff --git a/drivers/pci/pcie/portdrv_pci.c b/drivers/pci/pcie/portdrv_pci.c
index eef22dc29140c..23a5a0c2c3fe9 100644
--- a/drivers/pci/pcie/portdrv_pci.c
+++ b/drivers/pci/pcie/portdrv_pci.c
@@ -226,11 +226,20 @@ static const struct dmi_system_id pcie_portdrv_dmi_table[] __initconst = {
 	 {}
 };
 
+static void __init pcie_init_services(void)
+{
+	pcie_aer_init();
+	pcie_pme_init();
+	pcie_dpc_init();
+	pcie_hp_init();
+}
+
 static int __init pcie_portdrv_init(void)
 {
 	if (pcie_ports_disabled)
 		return -EACCES;
 
+	pcie_init_services();
 	dmi_check_system(pcie_portdrv_dmi_table);
 
 	return pci_register_driver(&pcie_portdriver);
-- 
2.20.1

[PATCH AUTOSEL 4.19 079/191] PCI/AER: Take reference on error devices

[Sasha Levin]

From: Keith Busch <keith.busch@intel.com>

[ Upstream commit 60271ab044a53edb9dcbe76bebea2221c4ff04d9 ]

Error handling may be running in parallel with a hot removal.  Reference
count the device during AER handling so the device can not be freed while
AER wants to reference it.

Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Sinan Kaya <okaya@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/pcie/aer.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/pci/pcie/aer.c b/drivers/pci/pcie/aer.c
index 637d638f73da5..ffbbd759683c5 100644
--- a/drivers/pci/pcie/aer.c
+++ b/drivers/pci/pcie/aer.c
@@ -866,7 +866,7 @@ void cper_print_aer(struct pci_dev *dev, int aer_severity,
 static int add_error_device(struct aer_err_info *e_info, struct pci_dev *dev)
 {
 	if (e_info->error_dev_num < AER_MAX_MULTI_ERR_DEVICES) {
-		e_info->dev[e_info->error_dev_num] = dev;
+		e_info->dev[e_info->error_dev_num] = pci_dev_get(dev);
 		e_info->error_dev_num++;
 		return 0;
 	}
@@ -1013,6 +1013,7 @@ static void handle_error_source(struct pci_dev *dev, struct aer_err_info *info)
 		pcie_do_nonfatal_recovery(dev);
 	else if (info->severity == AER_FATAL)
 		pcie_do_fatal_recovery(dev, PCIE_PORT_SERVICE_AER);
+	pci_dev_put(dev);
 }
 
 #ifdef CONFIG_ACPI_APEI_PCIEAER
-- 
2.20.1

[PATCH AUTOSEL 4.19 080/191] PCI/AER: Don't read upstream ports below fatal errors

[Sasha Levin]

From: Keith Busch <keith.busch@intel.com>

[ Upstream commit 9d938ea53b265ed6df6cdd1715d971f0235fdbfc ]

The AER driver has never read the config space of an endpoint that reported
a fatal error because the link to that device is considered unreliable.

An ERR_FATAL from an upstream port almost certainly indicates an error on
its upstream link, so we can't expect to reliably read its config space for
the same reason.

Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Sinan Kaya <okaya@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/pcie/aer.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/pci/pcie/aer.c b/drivers/pci/pcie/aer.c
index ffbbd759683c5..5c3ea7254c6ae 100644
--- a/drivers/pci/pcie/aer.c
+++ b/drivers/pci/pcie/aer.c
@@ -1116,8 +1116,9 @@ int aer_get_device_error_info(struct pci_dev *dev, struct aer_err_info *info)
 			&info->mask);
 		if (!(info->status & ~info->mask))
 			return 0;
-	} else if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE ||
-		info->severity == AER_NONFATAL) {
+	} else if (pci_pcie_type(dev) == PCI_EXP_TYPE_ROOT_PORT ||
+	           pci_pcie_type(dev) == PCI_EXP_TYPE_DOWNSTREAM ||
+		   info->severity == AER_NONFATAL) {
 
 		/* Link is still healthy for IO reads */
 		pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_STATUS,
-- 
2.20.1

[PATCH AUTOSEL 4.19 081/191] PCI/ERR: Use slot reset if available

[Sasha Levin]

From: Keith Busch <keith.busch@intel.com>

[ Upstream commit c4eed62a214330908eec11b0dc170d34fa50b412 ]

The secondary bus reset may have link side effects that a hotplug capable
port may incorrectly react to.  Use the slot specific reset for hotplug
ports, fixing the undesirable link down-up handling during error
recovering.

Signed-off-by: Keith Busch <keith.busch@intel.com>
[bhelgaas: fold in
https://lore.kernel.org/linux-pci/20180926152326.14821-1-keith.busch@intel.com
for issue reported by Stephen Rothwell <sfr@canb.auug.org.au>]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Sinan Kaya <okaya@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/pci.c      | 37 +++++++++++++++++++++++++++++++++++++
 drivers/pci/pci.h      |  2 ++
 drivers/pci/pcie/aer.c |  2 +-
 drivers/pci/pcie/err.c |  2 +-
 drivers/pci/slot.c     |  1 -
 5 files changed, 41 insertions(+), 3 deletions(-)

diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 2baf1f82f8933..c9f51fc24563c 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -35,6 +35,8 @@
 #include <linux/aer.h>
 #include "pci.h"
 
+DEFINE_MUTEX(pci_slot_mutex);
+
 const char *pci_power_names[] = {
 	"error", "D0", "D1", "D2", "D3hot", "D3cold", "unknown",
 };
@@ -5191,6 +5193,41 @@ static int pci_bus_reset(struct pci_bus *bus, int probe)
 	return ret;
 }
 
+/**
+ * pci_bus_error_reset - reset the bridge's subordinate bus
+ * @bridge: The parent device that connects to the bus to reset
+ *
+ * This function will first try to reset the slots on this bus if the method is
+ * available. If slot reset fails or is not available, this will fall back to a
+ * secondary bus reset.
+ */
+int pci_bus_error_reset(struct pci_dev *bridge)
+{
+	struct pci_bus *bus = bridge->subordinate;
+	struct pci_slot *slot;
+
+	if (!bus)
+		return -ENOTTY;
+
+	mutex_lock(&pci_slot_mutex);
+	if (list_empty(&bus->slots))
+		goto bus_reset;
+
+	list_for_each_entry(slot, &bus->slots, list)
+		if (pci_probe_reset_slot(slot))
+			goto bus_reset;
+
+	list_for_each_entry(slot, &bus->slots, list)
+		if (pci_slot_reset(slot, 0))
+			goto bus_reset;
+
+	mutex_unlock(&pci_slot_mutex);
+	return 0;
+bus_reset:
+	mutex_unlock(&pci_slot_mutex);
+	return pci_bus_reset(bridge->subordinate, 0);
+}
+
 /**
  * pci_probe_reset_bus - probe whether a PCI bus can be reset
  * @bus: PCI bus to probe
diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
index ab25752f00d96..e9ede82ee2c25 100644
--- a/drivers/pci/pci.h
+++ b/drivers/pci/pci.h
@@ -35,6 +35,7 @@ int pci_mmap_fits(struct pci_dev *pdev, int resno, struct vm_area_struct *vmai,
 
 int pci_probe_reset_function(struct pci_dev *dev);
 int pci_bridge_secondary_bus_reset(struct pci_dev *dev);
+int pci_bus_error_reset(struct pci_dev *dev);
 
 /**
  * struct pci_platform_pm_ops - Firmware PM callbacks
@@ -136,6 +137,7 @@ static inline void pci_remove_legacy_files(struct pci_bus *bus) { return; }
 
 /* Lock for read/write access to pci device and bus lists */
 extern struct rw_semaphore pci_bus_sem;
+extern struct mutex pci_slot_mutex;
 
 extern raw_spinlock_t pci_lock;
 
diff --git a/drivers/pci/pcie/aer.c b/drivers/pci/pcie/aer.c
index 5c3ea7254c6ae..1563e22600eca 100644
--- a/drivers/pci/pcie/aer.c
+++ b/drivers/pci/pcie/aer.c
@@ -1528,7 +1528,7 @@ static pci_ers_result_t aer_root_reset(struct pci_dev *dev)
 	reg32 &= ~ROOT_PORT_INTR_ON_MESG_MASK;
 	pci_write_config_dword(dev, pos + PCI_ERR_ROOT_COMMAND, reg32);
 
-	rc = pci_bridge_secondary_bus_reset(dev);
+	rc = pci_bus_error_reset(dev);
 	pci_printk(KERN_DEBUG, dev, "Root Port link has been reset\n");
 
 	/* Clear Root Error Status */
diff --git a/drivers/pci/pcie/err.c b/drivers/pci/pcie/err.c
index 708fd3a0d6466..12c1205e1d804 100644
--- a/drivers/pci/pcie/err.c
+++ b/drivers/pci/pcie/err.c
@@ -177,7 +177,7 @@ static pci_ers_result_t default_reset_link(struct pci_dev *dev)
 {
 	int rc;
 
-	rc = pci_bridge_secondary_bus_reset(dev);
+	rc = pci_bus_error_reset(dev);
 	pci_printk(KERN_DEBUG, dev, "downstream link has been reset\n");
 	return rc ? PCI_ERS_RESULT_DISCONNECT : PCI_ERS_RESULT_RECOVERED;
 }
diff --git a/drivers/pci/slot.c b/drivers/pci/slot.c
index e634229ece895..a32897f83ee51 100644
--- a/drivers/pci/slot.c
+++ b/drivers/pci/slot.c
@@ -14,7 +14,6 @@
 
 struct kset *pci_slots_kset;
 EXPORT_SYMBOL_GPL(pci_slots_kset);
-static DEFINE_MUTEX(pci_slot_mutex);
 
 static ssize_t pci_slot_attr_show(struct kobject *kobj,
 					struct attribute *attr, char *buf)
-- 
2.20.1

[PATCH AUTOSEL 4.19 085/191] net: freescale: fix return type of ndo_start_xmit function

[Sasha Levin]

From: YueHaibing <yuehaibing@huawei.com>

[ Upstream commit 06983aa526c759ebdf43f202d8d0491d9494e2f4 ]

The method ndo_start_xmit() is defined as returning an 'netdev_tx_t',
which is a typedef for an enum type, so make sure the implementation in
this driver has returns 'netdev_tx_t' value, and change the function
return type to netdev_tx_t.

Found by coccinelle.

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/freescale/dpaa/dpaa_eth.c        | 3 ++-
 drivers/net/ethernet/freescale/fec_mpc52xx.c          | 3 ++-
 drivers/net/ethernet/freescale/fs_enet/fs_enet-main.c | 3 ++-
 drivers/net/ethernet/freescale/gianfar.c              | 4 ++--
 drivers/net/ethernet/freescale/ucc_geth.c             | 3 ++-
 5 files changed, 10 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
index d7915cd68dc14..462bb8c4f80c9 100644
--- a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
+++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
@@ -2046,7 +2046,8 @@ static inline int dpaa_xmit(struct dpaa_priv *priv,
 	return 0;
 }
 
-static int dpaa_start_xmit(struct sk_buff *skb, struct net_device *net_dev)
+static netdev_tx_t
+dpaa_start_xmit(struct sk_buff *skb, struct net_device *net_dev)
 {
 	const int queue_mapping = skb_get_queue_mapping(skb);
 	bool nonlinear = skb_is_nonlinear(skb);
diff --git a/drivers/net/ethernet/freescale/fec_mpc52xx.c b/drivers/net/ethernet/freescale/fec_mpc52xx.c
index 6d7269d87a850..b90bab72efdb3 100644
--- a/drivers/net/ethernet/freescale/fec_mpc52xx.c
+++ b/drivers/net/ethernet/freescale/fec_mpc52xx.c
@@ -305,7 +305,8 @@ static int mpc52xx_fec_close(struct net_device *dev)
  * invariant will hold if you make sure that the netif_*_queue()
  * calls are done at the proper times.
  */
-static int mpc52xx_fec_start_xmit(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t
+mpc52xx_fec_start_xmit(struct sk_buff *skb, struct net_device *dev)
 {
 	struct mpc52xx_fec_priv *priv = netdev_priv(dev);
 	struct bcom_fec_bd *bd;
diff --git a/drivers/net/ethernet/freescale/fs_enet/fs_enet-main.c b/drivers/net/ethernet/freescale/fs_enet/fs_enet-main.c
index 2c2976a2dda6b..7c548ed535da5 100644
--- a/drivers/net/ethernet/freescale/fs_enet/fs_enet-main.c
+++ b/drivers/net/ethernet/freescale/fs_enet/fs_enet-main.c
@@ -481,7 +481,8 @@ static struct sk_buff *tx_skb_align_workaround(struct net_device *dev,
 }
 #endif
 
-static int fs_enet_start_xmit(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t
+fs_enet_start_xmit(struct sk_buff *skb, struct net_device *dev)
 {
 	struct fs_enet_private *fep = netdev_priv(dev);
 	cbd_t __iomem *bdp;
diff --git a/drivers/net/ethernet/freescale/gianfar.c b/drivers/net/ethernet/freescale/gianfar.c
index f27f9bae1a4ac..c97c4edfa31bc 100644
--- a/drivers/net/ethernet/freescale/gianfar.c
+++ b/drivers/net/ethernet/freescale/gianfar.c
@@ -112,7 +112,7 @@
 const char gfar_driver_version[] = "2.0";
 
 static int gfar_enet_open(struct net_device *dev);
-static int gfar_start_xmit(struct sk_buff *skb, struct net_device *dev);
+static netdev_tx_t gfar_start_xmit(struct sk_buff *skb, struct net_device *dev);
 static void gfar_reset_task(struct work_struct *work);
 static void gfar_timeout(struct net_device *dev);
 static int gfar_close(struct net_device *dev);
@@ -2334,7 +2334,7 @@ static inline bool gfar_csum_errata_76(struct gfar_private *priv,
 /* This is called by the kernel when a frame is ready for transmission.
  * It is pointed to by the dev->hard_start_xmit function pointer
  */
-static int gfar_start_xmit(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t gfar_start_xmit(struct sk_buff *skb, struct net_device *dev)
 {
 	struct gfar_private *priv = netdev_priv(dev);
 	struct gfar_priv_tx_q *tx_queue = NULL;
diff --git a/drivers/net/ethernet/freescale/ucc_geth.c b/drivers/net/ethernet/freescale/ucc_geth.c
index 1e2b53a934fb9..a5bf02ae4bc5c 100644
--- a/drivers/net/ethernet/freescale/ucc_geth.c
+++ b/drivers/net/ethernet/freescale/ucc_geth.c
@@ -3085,7 +3085,8 @@ static int ucc_geth_startup(struct ucc_geth_private *ugeth)
 
 /* This is called by the kernel when a frame is ready for transmission. */
 /* It is pointed to by the dev->hard_start_xmit function pointer */
-static int ucc_geth_start_xmit(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t
+ucc_geth_start_xmit(struct sk_buff *skb, struct net_device *dev)
 {
 	struct ucc_geth_private *ugeth = netdev_priv(dev);
 #ifdef CONFIG_UGETH_TX_ON_DEMAND
-- 
2.20.1

[PATCH AUTOSEL 4.19 145/191] PCI/ERR: Run error recovery callbacks for all affected devices

[Sasha Levin]

From: Keith Busch <keith.busch@intel.com>

[ Upstream commit bfcb79fca19d267712e425af1dd48812c40dec0c ]

If an Endpoint reported an error with ERR_FATAL, we previously ran driver
error recovery callbacks only for the Endpoint's driver.  But if we reset a
Link to recover from the error, all downstream components are affected,
including the Endpoint, any multi-function peers, and children of those
peers.

Initiate the Link reset from the deepest Downstream Port that is
reliable, and call the error recovery callbacks for all its children.

If a Downstream Port (including a Root Port) reports an error, we assume
the Port itself is reliable and we need to reset its downstream Link.  In
all other cases (Switch Upstream Ports, Endpoints, Bridges, etc), we assume
the Link leading to the component needs to be reset, so we initiate the
reset at the parent Downstream Port.

This allows two other clean-ups.  First, we currently only use a Link
reset, which can only be initiated using a Downstream Port, so we can
remove checks for Endpoints.  Second, the Downstream Port where we initiate
the Link reset is reliable (unlike components downstream from it), so the
special cases for error detect and resume are no longer necessary.

Signed-off-by: Keith Busch <keith.busch@intel.com>
[bhelgaas: changelog]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Sinan Kaya <okaya@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/pcie/err.c | 85 +++++++++++-------------------------------
 1 file changed, 21 insertions(+), 64 deletions(-)

diff --git a/drivers/pci/pcie/err.c b/drivers/pci/pcie/err.c
index 12c1205e1d804..2c3b5bd59b18f 100644
--- a/drivers/pci/pcie/err.c
+++ b/drivers/pci/pcie/err.c
@@ -63,30 +63,12 @@ static int report_error_detected(struct pci_dev *dev, void *data)
 	if (!dev->driver ||
 		!dev->driver->err_handler ||
 		!dev->driver->err_handler->error_detected) {
-		if (result_data->state == pci_channel_io_frozen &&
-			dev->hdr_type != PCI_HEADER_TYPE_BRIDGE) {
-			/*
-			 * In case of fatal recovery, if one of down-
-			 * stream device has no driver. We might be
-			 * unable to recover because a later insmod
-			 * of a driver for this device is unaware of
-			 * its hw state.
-			 */
-			pci_printk(KERN_DEBUG, dev, "device has %s\n",
-				   dev->driver ?
-				   "no AER-aware driver" : "no driver");
-		}
-
 		/*
-		 * If there's any device in the subtree that does not
-		 * have an error_detected callback, returning
-		 * PCI_ERS_RESULT_NO_AER_DRIVER prevents calling of
-		 * the subsequent mmio_enabled/slot_reset/resume
-		 * callbacks of "any" device in the subtree. All the
-		 * devices in the subtree are left in the error state
-		 * without recovery.
+		 * If any device in the subtree does not have an error_detected
+		 * callback, PCI_ERS_RESULT_NO_AER_DRIVER prevents subsequent
+		 * error callbacks of "any" device in the subtree, and will
+		 * exit in the disconnected error state.
 		 */
-
 		if (dev->hdr_type != PCI_HEADER_TYPE_BRIDGE)
 			vote = PCI_ERS_RESULT_NO_AER_DRIVER;
 		else
@@ -184,34 +166,23 @@ static pci_ers_result_t default_reset_link(struct pci_dev *dev)
 
 static pci_ers_result_t reset_link(struct pci_dev *dev, u32 service)
 {
-	struct pci_dev *udev;
 	pci_ers_result_t status;
 	struct pcie_port_service_driver *driver = NULL;
 
-	if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
-		/* Reset this port for all subordinates */
-		udev = dev;
-	} else {
-		/* Reset the upstream component (likely downstream port) */
-		udev = dev->bus->self;
-	}
-
-	/* Use the aer driver of the component firstly */
-	driver = pcie_port_find_service(udev, service);
-
+	driver = pcie_port_find_service(dev, service);
 	if (driver && driver->reset_link) {
-		status = driver->reset_link(udev);
-	} else if (udev->has_secondary_link) {
-		status = default_reset_link(udev);
+		status = driver->reset_link(dev);
+	} else if (dev->has_secondary_link) {
+		status = default_reset_link(dev);
 	} else {
 		pci_printk(KERN_DEBUG, dev, "no link-reset support at upstream device %s\n",
-			pci_name(udev));
+			pci_name(dev));
 		return PCI_ERS_RESULT_DISCONNECT;
 	}
 
 	if (status != PCI_ERS_RESULT_RECOVERED) {
 		pci_printk(KERN_DEBUG, dev, "link reset at upstream device %s failed\n",
-			pci_name(udev));
+			pci_name(dev));
 		return PCI_ERS_RESULT_DISCONNECT;
 	}
 
@@ -243,31 +214,7 @@ static pci_ers_result_t broadcast_error_message(struct pci_dev *dev,
 	else
 		result_data.result = PCI_ERS_RESULT_RECOVERED;
 
-	if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
-		/*
-		 * If the error is reported by a bridge, we think this error
-		 * is related to the downstream link of the bridge, so we
-		 * do error recovery on all subordinates of the bridge instead
-		 * of the bridge and clear the error status of the bridge.
-		 */
-		if (cb == report_error_detected)
-			dev->error_state = state;
-		pci_walk_bus(dev->subordinate, cb, &result_data);
-		if (cb == report_resume) {
-			pci_aer_clear_device_status(dev);
-			pci_cleanup_aer_uncorrect_error_status(dev);
-			dev->error_state = pci_channel_io_normal;
-		}
-	} else {
-		/*
-		 * If the error is reported by an end point, we think this
-		 * error is related to the upstream link of the end point.
-		 * The error is non fatal so the bus is ok; just invoke
-		 * the callback for the function that logged the error.
-		 */
-		cb(dev, &result_data);
-	}
-
+	pci_walk_bus(dev->subordinate, cb, &result_data);
 	return result_data.result;
 }
 
@@ -347,6 +294,14 @@ void pcie_do_nonfatal_recovery(struct pci_dev *dev)
 
 	state = pci_channel_io_normal;
 
+	/*
+	 * Error recovery runs on all subordinates of the first downstream port.
+	 * If the downstream port detected the error, it is cleared at the end.
+	 */
+	if (!(pci_pcie_type(dev) == PCI_EXP_TYPE_ROOT_PORT ||
+	      pci_pcie_type(dev) == PCI_EXP_TYPE_DOWNSTREAM))
+		dev = dev->bus->self;
+
 	status = broadcast_error_message(dev,
 			state,
 			"error_detected",
@@ -378,6 +333,8 @@ void pcie_do_nonfatal_recovery(struct pci_dev *dev)
 				"resume",
 				report_resume);
 
+	pci_aer_clear_device_status(dev);
+	pci_cleanup_aer_uncorrect_error_status(dev);
 	pci_info(dev, "AER: Device recovery successful\n");
 	return;
 
-- 
2.20.1