[PATCH AUTOSEL 4.14 062/371] ASoC: imx-sgtl5000: put of nodes if finding codec fails

[PATCH AUTOSEL 4.14 062/371] ASoC: imx-sgtl5000: put of nodes if finding codec fails

[Sasha Levin]

From: Stefan Agner <stefan@agner.ch>

[ Upstream commit d9866572486802bc598a3e8576a5231378d190de ]

Make sure to properly put the of node in case finding the codec
fails.

Fixes: 81e8e4926167 ("ASoC: fsl: add sgtl5000 clock support for imx-sgtl5000")
Signed-off-by: Stefan Agner <stefan@agner.ch>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/fsl/imx-sgtl5000.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/sound/soc/fsl/imx-sgtl5000.c b/sound/soc/fsl/imx-sgtl5000.c
index 8e525f7ac08d..3d99a8579c99 100644
--- a/sound/soc/fsl/imx-sgtl5000.c
+++ b/sound/soc/fsl/imx-sgtl5000.c
@@ -119,7 +119,8 @@ static int imx_sgtl5000_probe(struct platform_device *pdev)
 	codec_dev = of_find_i2c_device_by_node(codec_np);
 	if (!codec_dev) {
 		dev_err(&pdev->dev, "failed to find codec platform device\n");
-		return -EPROBE_DEFER;
+		ret = -EPROBE_DEFER;
+		goto fail;
 	}
 
 	data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
-- 
2.20.1

[PATCH AUTOSEL 4.14 103/371] KVM: PPC: Release all hardware TCE tables attached to a group

[Sasha Levin]

From: Alexey Kardashevskiy <aik@ozlabs.ru>

[ Upstream commit a67614cc05a5052b265ea48196dab2fce11f5f2e ]

The SPAPR TCE KVM device references all hardware IOMMU tables assigned to
some IOMMU group to ensure that in-kernel KVM acceleration of H_PUT_TCE
can work. The tables are references when an IOMMU group gets registered
with the VFIO KVM device by the KVM_DEV_VFIO_GROUP_ADD ioctl;
KVM_DEV_VFIO_GROUP_DEL calls into the dereferencing code
in kvm_spapr_tce_release_iommu_group() which walks through the list of
LIOBNs, finds a matching IOMMU table and calls kref_put() when found.

However that code stops after the very first successful derefencing
leaving other tables referenced till the SPAPR TCE KVM device is destroyed
which normally happens on guest reboot or termination so if we do hotplug
and unplug in a loop, we are leaking IOMMU tables here.

This removes a premature return to let kvm_spapr_tce_release_iommu_group()
find and dereference all attached tables.

Fixes: 121f80ba68f ("KVM: PPC: VFIO: Add in-kernel acceleration for VFIO")
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/kvm/book3s_64_vio.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/powerpc/kvm/book3s_64_vio.c b/arch/powerpc/kvm/book3s_64_vio.c
index 5e4446296021..ef6a58838e7c 100644
--- a/arch/powerpc/kvm/book3s_64_vio.c
+++ b/arch/powerpc/kvm/book3s_64_vio.c
@@ -134,7 +134,6 @@ extern void kvm_spapr_tce_release_iommu_group(struct kvm *kvm,
 					continue;
 
 				kref_put(&stit->kref, kvm_spapr_tce_liobn_put);
-				return;
 			}
 		}
 	}
-- 
2.20.1

[PATCH AUTOSEL 4.14 116/371] powerpc/64s: Fix logic when handling unknown CPU features

[Sasha Levin]

From: Michael Ellerman <mpe@ellerman.id.au>

[ Upstream commit 8cfaf106918a8c13abb24c641556172afbb9545c ]

In cpufeatures_process_feature(), if a provided CPU feature is unknown and
enable_unknown is false, we erroneously print that the feature is being
enabled and return true, even though no feature has been enabled, and
may also set feature bits based on the last entry in the match table.

Fix this so that we only set feature bits from the match table if we have
actually enabled a feature from that table, and when failing to enable an
unknown feature, always print the "not enabling" message and return false.

Coincidentally, some older gccs (<GCC 7), when invoked with
-fsanitize-coverage=trace-pc, cause a spurious uninitialised variable
warning in this function:

  arch/powerpc/kernel/dt_cpu_ftrs.c: In function ‘cpufeatures_process_feature’:
  arch/powerpc/kernel/dt_cpu_ftrs.c:686:7: warning: ‘m’ may be used uninitialized in this function [-Wmaybe-uninitialized]
    if (m->cpu_ftr_bit_mask)

An upcoming patch will enable support for kcov, which requires this option.
This patch avoids the warning.

Fixes: 5a61ef74f269 ("powerpc/64s: Support new device tree binding for discovering CPU features")
Reported-by: Segher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
[ajd: add commit message]
Signed-off-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/kernel/dt_cpu_ftrs.c | 17 +++++++----------
 1 file changed, 7 insertions(+), 10 deletions(-)

diff --git a/arch/powerpc/kernel/dt_cpu_ftrs.c b/arch/powerpc/kernel/dt_cpu_ftrs.c
index 2357df60de95..7ed2b1b6643c 100644
--- a/arch/powerpc/kernel/dt_cpu_ftrs.c
+++ b/arch/powerpc/kernel/dt_cpu_ftrs.c
@@ -705,8 +705,10 @@ static bool __init cpufeatures_process_feature(struct dt_cpu_feature *f)
 		m = &dt_cpu_feature_match_table[i];
 		if (!strcmp(f->name, m->name)) {
 			known = true;
-			if (m->enable(f))
+			if (m->enable(f)) {
+				cur_cpu_spec->cpu_features |= m->cpu_ftr_bit_mask;
 				break;
+			}
 
 			pr_info("not enabling: %s (disabled or unsupported by kernel)\n",
 				f->name);
@@ -714,17 +716,12 @@ static bool __init cpufeatures_process_feature(struct dt_cpu_feature *f)
 		}
 	}
 
-	if (!known && enable_unknown) {
-		if (!feat_try_enable_unknown(f)) {
-			pr_info("not enabling: %s (unknown and unsupported by kernel)\n",
-				f->name);
-			return false;
-		}
+	if (!known && (!enable_unknown || !feat_try_enable_unknown(f))) {
+		pr_info("not enabling: %s (unknown and unsupported by kernel)\n",
+			f->name);
+		return false;
 	}
 
-	if (m->cpu_ftr_bit_mask)
-		cur_cpu_spec->cpu_features |= m->cpu_ftr_bit_mask;
-
 	if (known)
 		pr_debug("enabling: %s\n", f->name);
 	else
-- 
2.20.1

[PATCH AUTOSEL 4.14 129/371] powerpc/mm: Check secondary hash page table

[Sasha Levin]

From: Rashmica Gupta <rashmica.g@gmail.com>

[ Upstream commit 790845e2f12709d273d08ea7a2af7c2593689519 ]

We were always calling base_hpte_find() with primary = true,
even when we wanted to check the secondary table.

mpe: I broke this when refactoring Rashmica's original patch.

Fixes: 1515ab932156 ("powerpc/mm: Dump hash table")
Signed-off-by: Rashmica Gupta <rashmica.g@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/mm/dump_hashpagetable.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/powerpc/mm/dump_hashpagetable.c b/arch/powerpc/mm/dump_hashpagetable.c
index 5c4c93dcff19..f666d74f05f5 100644
--- a/arch/powerpc/mm/dump_hashpagetable.c
+++ b/arch/powerpc/mm/dump_hashpagetable.c
@@ -343,7 +343,7 @@ static unsigned long hpte_find(struct pg_state *st, unsigned long ea, int psize)
 
 	/* Look in secondary table */
 	if (slot == -1)
-		slot = base_hpte_find(ea, psize, true, &v, &r);
+		slot = base_hpte_find(ea, psize, false, &v, &r);
 
 	/* No entry found */
 	if (slot == -1)
-- 
2.20.1

[PATCH AUTOSEL 4.14 155/371] soc/fsl/qe: Fix an error code in qe_pin_request()

[Sasha Levin]

From: Dan Carpenter <dan.carpenter@oracle.com>

[ Upstream commit 5674a92ca4b7e5a6a19231edd10298d30324cd27 ]

We forgot to set "err" on this error path.

Fixes: 1a2d397a6eb5 ("gpio/powerpc: Eliminate duplication of of_get_named_gpio_flags()")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/soc/fsl/qe/gpio.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/soc/fsl/qe/gpio.c b/drivers/soc/fsl/qe/gpio.c
index 3b27075c21a7..5cbc5ce5ac15 100644
--- a/drivers/soc/fsl/qe/gpio.c
+++ b/drivers/soc/fsl/qe/gpio.c
@@ -152,8 +152,10 @@ struct qe_pin *qe_pin_request(struct device_node *np, int index)
 	if (err < 0)
 		goto err0;
 	gc = gpio_to_chip(err);
-	if (WARN_ON(!gc))
+	if (WARN_ON(!gc)) {
+		err = -ENODEV;
 		goto err0;
+	}
 
 	if (!of_device_is_compatible(gc->of_node, "fsl,mpc8323-qe-pario-bank")) {
 		pr_debug("%s: tried to get a non-qe pin\n", __func__);
-- 
2.20.1

[PATCH AUTOSEL 4.14 166/371] powerpc: vdso: Make vdso32 installation conditional in vdso_install

[Sasha Levin]

From: Ben Hutchings <ben@decadent.org.uk>

[ Upstream commit ff6d27823f619892ab96f7461764840e0d786b15 ]

The 32-bit vDSO is not needed and not normally built for 64-bit
little-endian configurations.  However, the vdso_install target still
builds and installs it.  Add the same config condition as is normally
used for the build.

Fixes: e0d005916994 ("powerpc/vdso: Disable building the 32-bit VDSO ...")
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/Makefile | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile
index 0f04c878113e..9c78ef298257 100644
--- a/arch/powerpc/Makefile
+++ b/arch/powerpc/Makefile
@@ -385,7 +385,9 @@ vdso_install:
 ifeq ($(CONFIG_PPC64),y)
 	$(Q)$(MAKE) $(build)=arch/$(ARCH)/kernel/vdso64 $@
 endif
+ifdef CONFIG_VDSO32
 	$(Q)$(MAKE) $(build)=arch/$(ARCH)/kernel/vdso32 $@
+endif
 
 archclean:
 	$(Q)$(MAKE) $(clean)=$(boot)
-- 
2.20.1

[PATCH AUTOSEL 4.14 228/371] powerpc/cacheinfo: add cacheinfo_teardown, cacheinfo_rebuild

[Sasha Levin]

From: Nathan Lynch <nathanl@linux.ibm.com>

[ Upstream commit d4aa219a074a5abaf95a756b9f0d190b5c03a945 ]

Allow external callers to force the cacheinfo code to release all its
references to cache nodes, e.g. before processing device tree updates
post-migration, and to rebuild the hierarchy afterward.

CPU online/offline must be blocked by callers; enforce this.

Fixes: 410bccf97881 ("powerpc/pseries: Partition migration in the kernel")
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/kernel/cacheinfo.c | 21 +++++++++++++++++++++
 arch/powerpc/kernel/cacheinfo.h |  4 ++++
 2 files changed, 25 insertions(+)

diff --git a/arch/powerpc/kernel/cacheinfo.c b/arch/powerpc/kernel/cacheinfo.c
index a8f20e5928e1..9edb45430133 100644
--- a/arch/powerpc/kernel/cacheinfo.c
+++ b/arch/powerpc/kernel/cacheinfo.c
@@ -865,4 +865,25 @@ void cacheinfo_cpu_offline(unsigned int cpu_id)
 	if (cache)
 		cache_cpu_clear(cache, cpu_id);
 }
+
+void cacheinfo_teardown(void)
+{
+	unsigned int cpu;
+
+	lockdep_assert_cpus_held();
+
+	for_each_online_cpu(cpu)
+		cacheinfo_cpu_offline(cpu);
+}
+
+void cacheinfo_rebuild(void)
+{
+	unsigned int cpu;
+
+	lockdep_assert_cpus_held();
+
+	for_each_online_cpu(cpu)
+		cacheinfo_cpu_online(cpu);
+}
+
 #endif /* (CONFIG_PPC_PSERIES && CONFIG_SUSPEND) || CONFIG_HOTPLUG_CPU */
diff --git a/arch/powerpc/kernel/cacheinfo.h b/arch/powerpc/kernel/cacheinfo.h
index 955f5e999f1b..52bd3fc6642d 100644
--- a/arch/powerpc/kernel/cacheinfo.h
+++ b/arch/powerpc/kernel/cacheinfo.h
@@ -6,4 +6,8 @@
 extern void cacheinfo_cpu_online(unsigned int cpu_id);
 extern void cacheinfo_cpu_offline(unsigned int cpu_id);
 
+/* Allow migration/suspend to tear down and rebuild the hierarchy. */
+extern void cacheinfo_teardown(void);
+extern void cacheinfo_rebuild(void);
+
 #endif /* _PPC_CACHEINFO_H */
-- 
2.20.1

[PATCH AUTOSEL 4.14 229/371] powerpc/pseries/mobility: rebuild cacheinfo hierarchy post-migration

[Sasha Levin]

From: Nathan Lynch <nathanl@linux.ibm.com>

[ Upstream commit e610a466d16a086e321f0bd421e2fc75cff28605 ]

It's common for the platform to replace the cache device nodes after a
migration. Since the cacheinfo code is never informed about this, it
never drops its references to the source system's cache nodes, causing
it to wind up in an inconsistent state resulting in warnings and oopses
as soon as CPU online/offline occurs after the migration, e.g.

  cache for /cpus/l3-cache@3113(Unified) refers to cache for /cpus/l2-cache@200d(Unified)
  WARNING: CPU: 15 PID: 86 at arch/powerpc/kernel/cacheinfo.c:176 release_cache+0x1bc/0x1d0
  [...]
  NIP release_cache+0x1bc/0x1d0
  LR  release_cache+0x1b8/0x1d0
  Call Trace:
    release_cache+0x1b8/0x1d0 (unreliable)
    cacheinfo_cpu_offline+0x1c4/0x2c0
    unregister_cpu_online+0x1b8/0x260
    cpuhp_invoke_callback+0x114/0xf40
    cpuhp_thread_fun+0x270/0x310
    smpboot_thread_fn+0x2c8/0x390
    kthread+0x1b8/0x1c0
    ret_from_kernel_thread+0x5c/0x68

Using device tree notifiers won't work since we want to rebuild the
hierarchy only after all the removals and additions have occurred and
the device tree is in a consistent state. Call cacheinfo_teardown()
before processing device tree updates, and rebuild the hierarchy
afterward.

Fixes: 410bccf97881 ("powerpc/pseries: Partition migration in the kernel")
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/platforms/pseries/mobility.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/arch/powerpc/platforms/pseries/mobility.c b/arch/powerpc/platforms/pseries/mobility.c
index 9739a055e5f7..2d3668acb6ef 100644
--- a/arch/powerpc/platforms/pseries/mobility.c
+++ b/arch/powerpc/platforms/pseries/mobility.c
@@ -23,6 +23,7 @@
 #include <asm/machdep.h>
 #include <asm/rtas.h>
 #include "pseries.h"
+#include "../../kernel/cacheinfo.h"
 
 static struct kobject *mobility_kobj;
 
@@ -359,11 +360,20 @@ void post_mobility_fixup(void)
 	 */
 	cpus_read_lock();
 
+	/*
+	 * It's common for the destination firmware to replace cache
+	 * nodes.  Release all of the cacheinfo hierarchy's references
+	 * before updating the device tree.
+	 */
+	cacheinfo_teardown();
+
 	rc = pseries_devicetree_update(MIGRATION_SCOPE);
 	if (rc)
 		printk(KERN_ERR "Post-mobility device tree update "
 			"failed: %d\n", rc);
 
+	cacheinfo_rebuild();
+
 	cpus_read_unlock();
 
 	/* Possibly switch to a new RFI flush type */
-- 
2.20.1

[PATCH AUTOSEL 4.14 237/371] perf/ioctl: Add check for the sample_period value

[Sasha Levin]

From: Ravi Bangoria <ravi.bangoria@linux.ibm.com>

[ Upstream commit 913a90bc5a3a06b1f04c337320e9aeee2328dd77 ]

perf_event_open() limits the sample_period to 63 bits. See:

  0819b2e30ccb ("perf: Limit perf_event_attr::sample_period to 63 bits")

Make ioctl() consistent with it.

Also on PowerPC, negative sample_period could cause a recursive
PMIs leading to a hang (reported when running perf-fuzzer).

Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: acme@kernel.org
Cc: linuxppc-dev@lists.ozlabs.org
Cc: maddy@linux.vnet.ibm.com
Cc: mpe@ellerman.id.au
Fixes: 0819b2e30ccb ("perf: Limit perf_event_attr::sample_period to 63 bits")
Link: https://lkml.kernel.org/r/20190604042953.914-1-ravi.bangoria@linux.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/events/core.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/kernel/events/core.c b/kernel/events/core.c
index ea4f3f7a0c6f..2ac73b4cb8a9 100644
--- a/kernel/events/core.c
+++ b/kernel/events/core.c
@@ -4762,6 +4762,9 @@ static int perf_event_period(struct perf_event *event, u64 __user *arg)
 	if (perf_event_check_period(event, value))
 		return -EINVAL;
 
+	if (!event->attr.freq && (value & (1ULL << 63)))
+		return -EINVAL;
+
 	event_function_call(event, __perf_event_period, &value);
 
 	return 0;
-- 
2.20.1

[PATCH AUTOSEL 4.14 257/371] ALSA: aoa: onyx: always initialize register read value

[Sasha Levin]

From: Johannes Berg <johannes@sipsolutions.net>

[ Upstream commit f474808acb3c4b30552d9c59b181244e0300d218 ]

A lot of places in the driver use onyx_read_register() without
checking the return value, and it's been working OK for ~10 years
or so, so probably never fails ... Rather than trying to check the
return value everywhere, which would be relatively intrusive, at
least make sure we don't use an uninitialized value.

Fixes: f3d9478b2ce4 ("[ALSA] snd-aoa: add snd-aoa")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/aoa/codecs/onyx.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/sound/aoa/codecs/onyx.c b/sound/aoa/codecs/onyx.c
index d2d96ca082b7..6224fd3bbf7c 100644
--- a/sound/aoa/codecs/onyx.c
+++ b/sound/aoa/codecs/onyx.c
@@ -74,8 +74,10 @@ static int onyx_read_register(struct onyx *onyx, u8 reg, u8 *value)
 		return 0;
 	}
 	v = i2c_smbus_read_byte_data(onyx->i2c, reg);
-	if (v < 0)
+	if (v < 0) {
+		*value = 0;
 		return -1;
+	}
 	*value = (u8)v;
 	onyx->cache[ONYX_REG_CONTROL-FIRSTREGISTER] = *value;
 	return 0;
-- 
2.20.1

[PATCH AUTOSEL 4.14 360/371] powerpc/powernv: Disable native PCIe port management

[Sasha Levin]

From: Oliver O'Halloran <oohall@gmail.com>

[ Upstream commit 9d72dcef891030545f39ad386a30cf91df517fb2 ]

On PowerNV the PCIe topology is (currently) managed by the powernv platform
code in Linux in cooperation with the platform firmware. Linux's native
PCIe port service drivers operate independently of both and this can cause
problems.

The main issue is that the portbus driver will conflict with the platform
specific hotplug driver (pnv_php) over ownership of the MSI used to notify
the host when a hotplug event occurs. The portbus driver claims this MSI on
behalf of the individual port services because the same interrupt is used
for hotplug events, PMEs (on root ports), and link bandwidth change
notifications. The portbus driver will always claim the interrupt even if
the individual port service drivers, such as pciehp, are compiled out.

The second, bigger, problem is that the hotplug port service driver
fundamentally does not work on PowerNV. The platform assumes that all
PCI devices have a corresponding arch-specific handle derived from the DT
node for the device (pci_dn) and without one the platform will not allow
a PCI device to be enabled. This problem is largely due to historical
baggage, but it can't be resolved without significant re-factoring of the
platform PCI support.

We can fix these problems in the interim by setting the
"pcie_ports_disabled" flag during platform initialisation. The flag
indicates the platform owns the PCIe ports which stops the portbus driver
from being registered.

This does have the side effect of disabling all port services drivers
that is: AER, PME, BW notifications, hotplug, and DPC. However, this is
not a huge disadvantage on PowerNV since these services are either unused
or handled through other means.

Fixes: 66725152fb9f ("PCI/hotplug: PowerPC PowerNV PCI hotplug driver")
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191118065553.30362-1-oohall@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/platforms/powernv/pci.c | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)

diff --git a/arch/powerpc/platforms/powernv/pci.c b/arch/powerpc/platforms/powernv/pci.c
index e2d031a3ec15..961c131a5b7e 100644
--- a/arch/powerpc/platforms/powernv/pci.c
+++ b/arch/powerpc/platforms/powernv/pci.c
@@ -1118,6 +1118,23 @@ void __init pnv_pci_init(void)
 	if (!firmware_has_feature(FW_FEATURE_OPAL))
 		return;
 
+#ifdef CONFIG_PCIEPORTBUS
+	/*
+	 * On PowerNV PCIe devices are (currently) managed in cooperation
+	 * with firmware. This isn't *strictly* required, but there's enough
+	 * assumptions baked into both firmware and the platform code that
+	 * it's unwise to allow the portbus services to be used.
+	 *
+	 * We need to fix this eventually, but for now set this flag to disable
+	 * the portbus driver. The AER service isn't required since that AER
+	 * events are handled via EEH. The pciehp hotplug driver can't work
+	 * without kernel changes (and portbus binding breaks pnv_php). The
+	 * other services also require some thinking about how we're going
+	 * to integrate them.
+	 */
+	pcie_ports_disabled = true;
+#endif
+
 	/* Look for IODA IO-Hubs. */
 	for_each_compatible_node(np, NULL, "ibm,ioda-hub") {
 		pnv_pci_init_ioda_hub(np);
-- 
2.20.1

[PATCH AUTOSEL 4.14 369/371] powerpc/archrandom: fix arch_get_random_seed_int()

[Sasha Levin]

From: Ard Biesheuvel <ardb@kernel.org>

[ Upstream commit b6afd1234cf93aa0d71b4be4788c47534905f0be ]

Commit 01c9348c7620ec65

  powerpc: Use hardware RNG for arch_get_random_seed_* not arch_get_random_*

updated arch_get_random_[int|long]() to be NOPs, and moved the hardware
RNG backing to arch_get_random_seed_[int|long]() instead. However, it
failed to take into account that arch_get_random_int() was implemented
in terms of arch_get_random_long(), and so we ended up with a version
of the former that is essentially a NOP as well.

Fix this by calling arch_get_random_seed_long() from
arch_get_random_seed_int() instead.

Fixes: 01c9348c7620ec65 ("powerpc: Use hardware RNG for arch_get_random_seed_* not arch_get_random_*")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191204115015.18015-1-ardb@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/include/asm/archrandom.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/powerpc/include/asm/archrandom.h b/arch/powerpc/include/asm/archrandom.h
index 9c63b596e6ce..a09595f00cab 100644
--- a/arch/powerpc/include/asm/archrandom.h
+++ b/arch/powerpc/include/asm/archrandom.h
@@ -28,7 +28,7 @@ static inline int arch_get_random_seed_int(unsigned int *v)
 	unsigned long val;
 	int rc;
 
-	rc = arch_get_random_long(&val);
+	rc = arch_get_random_seed_long(&val);
 	if (rc)
 		*v = val;
 
-- 
2.20.1