[PATCH] macintosh: therm_windtunnel: fix regression when instantiating devices

[PATCH] macintosh: therm_windtunnel: fix regression when instantiating devices

[Wolfram Sang]

Removing attach_adapter from this driver caused a regression for at
least some machines. Those machines had the sensors described in their
DT, too, so they didn't need manual creation of the sensor devices. The
old code worked, though, because manual creation came first. Creation of
DT devices then failed later and caused error logs, but the sensors
worked nonetheless because of the manually created devices.

When removing attach_adaper, manual creation now comes later and loses
the race. The sensor devices were already registered via DT, yet with
another binding, so the driver could not be bound to it.

This fix refactors the code to remove the race and only manually creates
devices if there are no DT nodes present. Also, the DT binding is updated
to match both, the DT and manually created devices. Because we don't
know which device creation will be used at runtime, the code to start
the kthread is moved to do_probe() which will be called by both methods.

Fixes: 3e7bed52719d ("macintosh: therm_windtunnel: drop using attach_adapter")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=201723
Reported-by: Erhard Furtner <erhard_f@mailbox.org>
Tested-by: Erhard Furtner <erhard_f@mailbox.org>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
---

I suggest this stable-tag: # v4.19+

Adding the Debian-PPC List to reach further people maybe willing to
test.

This patch does not depend on "[PATCH RESEND] macintosh: convert to
i2c_new_scanned_device". In fact, this one here should go in first as
5.6 material. I will rebase and resend the i2c_new_scanned_device()
conversion on top of this regression fix.

I can also take this via I2C if easier.

 drivers/macintosh/therm_windtunnel.c | 52 +++++++++++++++++-----------
 1 file changed, 31 insertions(+), 21 deletions(-)

diff --git a/drivers/macintosh/therm_windtunnel.c b/drivers/macintosh/therm_windtunnel.c
index 8c744578122a..a0d87ed9da69 100644
--- a/drivers/macintosh/therm_windtunnel.c
+++ b/drivers/macintosh/therm_windtunnel.c
@@ -300,9 +300,11 @@ static int control_loop(void *dummy)
 /*	i2c probing and setup						*/
 /************************************************************************/
 
-static int
-do_attach( struct i2c_adapter *adapter )
+static void do_attach(struct i2c_adapter *adapter)
 {
+	struct i2c_board_info info = { };
+	struct device_node *np;
+
 	/* scan 0x48-0x4f (DS1775) and 0x2c-2x2f (ADM1030) */
 	static const unsigned short scan_ds1775[] = {
 		0x48, 0x49, 0x4a, 0x4b, 0x4c, 0x4d, 0x4e, 0x4f,
@@ -313,25 +315,24 @@ do_attach( struct i2c_adapter *adapter )
 		I2C_CLIENT_END
 	};
 
-	if( strncmp(adapter->name, "uni-n", 5) )
-		return 0;
-
-	if( !x.running ) {
-		struct i2c_board_info info;
+	if (x.running || strncmp(adapter->name, "uni-n", 5))
+		return;
 
-		memset(&info, 0, sizeof(struct i2c_board_info));
-		strlcpy(info.type, "therm_ds1775", I2C_NAME_SIZE);
+	np = of_find_compatible_node(adapter->dev.of_node, NULL, "MAC,ds1775");
+	if (np) {
+		of_node_put(np);
+	} else {
+		strlcpy(info.type, "MAC,ds1775", I2C_NAME_SIZE);
 		i2c_new_probed_device(adapter, &info, scan_ds1775, NULL);
+	}
 
-		strlcpy(info.type, "therm_adm1030", I2C_NAME_SIZE);
+	np = of_find_compatible_node(adapter->dev.of_node, NULL, "MAC,adm1030");
+	if (np) {
+		of_node_put(np);
+	} else {
+		strlcpy(info.type, "MAC,adm1030", I2C_NAME_SIZE);
 		i2c_new_probed_device(adapter, &info, scan_adm1030, NULL);
-
-		if( x.thermostat && x.fan ) {
-			x.running = 1;
-			x.poll_task = kthread_run(control_loop, NULL, "g4fand");
-		}
 	}
-	return 0;
 }
 
 static int
@@ -404,8 +405,8 @@ attach_thermostat( struct i2c_client *cl )
 enum chip { ds1775, adm1030 };
 
 static const struct i2c_device_id therm_windtunnel_id[] = {
-	{ "therm_ds1775", ds1775 },
-	{ "therm_adm1030", adm1030 },
+	{ "MAC,ds1775", ds1775 },
+	{ "MAC,adm1030", adm1030 },
 	{ }
 };
 MODULE_DEVICE_TABLE(i2c, therm_windtunnel_id);
@@ -414,6 +415,7 @@ static int
 do_probe(struct i2c_client *cl, const struct i2c_device_id *id)
 {
 	struct i2c_adapter *adapter = cl->adapter;
+	int ret = 0;
 
 	if( !i2c_check_functionality(adapter, I2C_FUNC_SMBUS_WORD_DATA
 				     | I2C_FUNC_SMBUS_WRITE_BYTE) )
@@ -421,11 +423,19 @@ do_probe(struct i2c_client *cl, const struct i2c_device_id *id)
 
 	switch (id->driver_data) {
 	case adm1030:
-		return attach_fan( cl );
+		ret = attach_fan(cl);
+		break;
 	case ds1775:
-		return attach_thermostat(cl);
+		ret = attach_thermostat(cl);
+		break;
 	}
-	return 0;
+
+	if (!x.running && x.thermostat && x.fan) {
+		x.running = 1;
+		x.poll_task = kthread_run(control_loop, NULL, "g4fand");
+	}
+
+	return ret;
 }
 
 static struct i2c_driver g4fan_driver = {
-- 
2.20.1

Re: [PATCH] macintosh: therm_windtunnel: fix regression when instantiating devices

[John Paul Adrian Glaubitz]

Hello!

On 2/25/20 3:12 PM, Wolfram Sang wrote:
> Adding the Debian-PPC List to reach further people maybe willing to
> test.

This might be related [1].

Adrian

> [1] https://lists.debian.org/debian-powerpc/2020/01/msg00062.html

-- 
 .''`.  John Paul Adrian Glaubitz
: :' :  Debian Developer - glaubitz@debian.org
`. `'   Freie Universitaet Berlin - glaubitz@physik.fu-berlin.de
  `-    GPG: 62FF 8A75 84E0 2956 9546  0006 7426 3B37 F5B5 F913

Re: [PATCH] macintosh: therm_windtunnel: fix regression when instantiating devices

[Wolfram Sang]

[-- Attachment #1: Type: text/plain, Size: 373 bytes --]

On Tue, Feb 25, 2020 at 03:41:22PM +0100, John Paul Adrian Glaubitz wrote:
> Hello!
> 
> On 2/25/20 3:12 PM, Wolfram Sang wrote:
> > Adding the Debian-PPC List to reach further people maybe willing to
> > test.
> 
> This might be related [1].

IIUC, this is the same as
https://bugzilla.kernel.org/show_bug.cgi?id=199471.

I don't think my patch helps here.


[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

Re: [PATCH] macintosh: therm_windtunnel: fix regression when instantiating devices

[Michael Ellerman]

Wolfram Sang <wsa@the-dreams.de> writes:
> Removing attach_adapter from this driver caused a regression for at
> least some machines. Those machines had the sensors described in their
> DT, too, so they didn't need manual creation of the sensor devices. The
> old code worked, though, because manual creation came first. Creation of
> DT devices then failed later and caused error logs, but the sensors
> worked nonetheless because of the manually created devices.
>
> When removing attach_adaper, manual creation now comes later and loses
> the race. The sensor devices were already registered via DT, yet with
> another binding, so the driver could not be bound to it.
>
> This fix refactors the code to remove the race and only manually creates
> devices if there are no DT nodes present. Also, the DT binding is updated
> to match both, the DT and manually created devices. Because we don't
> know which device creation will be used at runtime, the code to start
> the kthread is moved to do_probe() which will be called by both methods.
>
> Fixes: 3e7bed52719d ("macintosh: therm_windtunnel: drop using attach_adapter")
> Link: https://bugzilla.kernel.org/show_bug.cgi?id=201723
> Reported-by: Erhard Furtner <erhard_f@mailbox.org>
> Tested-by: Erhard Furtner <erhard_f@mailbox.org>
> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
> ---
>
> I suggest this stable-tag: # v4.19+

Looks right to me.

> Adding the Debian-PPC List to reach further people maybe willing to
> test.
>
> This patch does not depend on "[PATCH RESEND] macintosh: convert to
> i2c_new_scanned_device". In fact, this one here should go in first as
> 5.6 material. I will rebase and resend the i2c_new_scanned_device()
> conversion on top of this regression fix.
>
> I can also take this via I2C if easier.

I think that would be best, it's more I2C related than powerpc arch
stuff that I could review.

I don't have a machine setup to test this easily, but Erhard has been
doing a good job of testing things so I'm happy for you to take it with
his Tested-by.

Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)

cheers

Re: [PATCH] macintosh: therm_windtunnel: fix regression when instantiating devices

[Wolfram Sang]

[-- Attachment #1: Type: text/plain, Size: 169 bytes --]

> I think that would be best, it's more I2C related than powerpc arch
> stuff that I could review.

It is more DT handling than I2C, but I am happy to take this patch.


[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

Re: [PATCH] macintosh: therm_windtunnel: fix regression when instantiating devices

[Wolfram Sang]

[-- Attachment #1: Type: text/plain, Size: 1422 bytes --]

On Tue, Feb 25, 2020 at 03:12:29PM +0100, Wolfram Sang wrote:
> Removing attach_adapter from this driver caused a regression for at
> least some machines. Those machines had the sensors described in their
> DT, too, so they didn't need manual creation of the sensor devices. The
> old code worked, though, because manual creation came first. Creation of
> DT devices then failed later and caused error logs, but the sensors
> worked nonetheless because of the manually created devices.
> 
> When removing attach_adaper, manual creation now comes later and loses
> the race. The sensor devices were already registered via DT, yet with
> another binding, so the driver could not be bound to it.
> 
> This fix refactors the code to remove the race and only manually creates
> devices if there are no DT nodes present. Also, the DT binding is updated
> to match both, the DT and manually created devices. Because we don't
> know which device creation will be used at runtime, the code to start
> the kthread is moved to do_probe() which will be called by both methods.
> 
> Fixes: 3e7bed52719d ("macintosh: therm_windtunnel: drop using attach_adapter")
> Link: https://bugzilla.kernel.org/show_bug.cgi?id=201723
> Reported-by: Erhard Furtner <erhard_f@mailbox.org>
> Tested-by: Erhard Furtner <erhard_f@mailbox.org>
> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>

Applied to for-current, thanks!


[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

Re: [PATCH] macintosh: therm_windtunnel: fix regression when instantiating devices

[Michael Ellerman]

Wolfram Sang <wsa@the-dreams.de> writes:
> On Tue, Feb 25, 2020 at 03:12:29PM +0100, Wolfram Sang wrote:
>> Removing attach_adapter from this driver caused a regression for at
>> least some machines. Those machines had the sensors described in their
>> DT, too, so they didn't need manual creation of the sensor devices. The
>> old code worked, though, because manual creation came first. Creation of
>> DT devices then failed later and caused error logs, but the sensors
>> worked nonetheless because of the manually created devices.
>> 
>> When removing attach_adaper, manual creation now comes later and loses
>> the race. The sensor devices were already registered via DT, yet with
>> another binding, so the driver could not be bound to it.
>> 
>> This fix refactors the code to remove the race and only manually creates
>> devices if there are no DT nodes present. Also, the DT binding is updated
>> to match both, the DT and manually created devices. Because we don't
>> know which device creation will be used at runtime, the code to start
>> the kthread is moved to do_probe() which will be called by both methods.
>> 
>> Fixes: 3e7bed52719d ("macintosh: therm_windtunnel: drop using attach_adapter")
>> Link: https://bugzilla.kernel.org/show_bug.cgi?id=201723
>> Reported-by: Erhard Furtner <erhard_f@mailbox.org>
>> Tested-by: Erhard Furtner <erhard_f@mailbox.org>
>> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
>
> Applied to for-current, thanks!

Thanks.

cheers