From: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
To: David Hildenbrand <david@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>,
linux-kernel@vger.kernel.org, Michal Hocko <mhocko@kernel.org>,
linux-mm@kvack.org, Mel Gorman <mgorman@suse.de>,
"Kirill A. Shutemov" <kirill@shutemov.name>,
Andrew Morton <akpm@linux-foundation.org>,
linuxppc-dev@lists.ozlabs.org, Christopher Lameter <cl@linux.com>,
Vlastimil Babka <vbabka@suse.cz>
Subject: Re: [PATCH v2 3/3] mm/page_alloc: Keep memoryless cpuless node 0 offline
Date: Mon, 11 May 2020 23:17:31 +0530 [thread overview]
Message-ID: <20200511174731.GD1961@linux.vnet.ibm.com> (raw)
In-Reply-To: <ce9d47bc-f92c-dd22-0d59-e8d59c913526@redhat.com>
* David Hildenbrand <david@redhat.com> [2020-05-08 15:42:12]:
Hi David,
Thanks for the steps to tryout.
> >
> > #! /bin/bash
> > sudo x86_64-softmmu/qemu-system-x86_64 \
> > --enable-kvm \
> > -m 4G,maxmem=20G,slots=2 \
> > -smp sockets=2,cores=2 \
> > -numa node,nodeid=0,cpus=0-1,mem=4G -numa node,nodeid=1,cpus=2-3,mem=0G \
>
> Sorry, this line has to be
>
> -numa node,nodeid=0,cpus=0-3,mem=4G -numa node,nodeid=1,mem=0G \
>
> > -kernel /home/dhildenb/git/linux/arch/x86_64/boot/bzImage \
> > -append "console=ttyS0 rd.shell rd.luks=0 rd.lvm=0 rd.md=0 rd.dm=0" \
> > -initrd /boot/initramfs-5.2.8-200.fc30.x86_64.img \
> > -machine pc,nvdimm \
> > -nographic \
> > -nodefaults \
> > -chardev stdio,id=serial \
> > -device isa-serial,chardev=serial \
> > -chardev socket,id=monitor,path=/var/tmp/monitor,server,nowait \
> > -mon chardev=monitor,mode=readline
> >
> > to get a cpu-less and memory-less node 1. Never tried with node 0.
> >
I tried
qemu-system-x86_64 -enable-kvm -m 4G,maxmem=20G,slots=2 -smp sockets=2,cores=2 -cpu host -numa node,nodeid=0,cpus=0-3,mem=4G -numa node,nodeid=1,mem=0G -vga none -nographic -serial mon:stdio /home/srikar/fedora.qcow2
and the resulting guest was.
[root@localhost ~]# numactl -H
available: 1 nodes (0)
node 0 cpus: 0 1 2 3
node 0 size: 3927 MB
node 0 free: 3316 MB
node distances:
node 0
0: 10
[root@localhost ~]# lscpu
Architecture: x86_64
CPU op-mode(s): 32-bit, 64-bit
Byte Order: Little Endian
Address sizes: 40 bits physical, 48 bits virtual
CPU(s): 4
On-line CPU(s) list: 0-3
Thread(s) per core: 1
Core(s) per socket: 2
Socket(s): 2
NUMA node(s): 1
Vendor ID: GenuineIntel
CPU family: 6
Model: 46
Model name: Intel(R) Xeon(R) CPU X7560 @ 2.27GHz
Stepping: 6
CPU MHz: 2260.986
BogoMIPS: 4521.97
Virtualization: VT-x
Hypervisor vendor: KVM
Virtualization type: full
L1d cache: 32K
L1i cache: 32K
L2 cache: 4096K
L3 cache: 16384K
NUMA node0 CPU(s): 0-3
Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx rdtscp lm constant_tsc arch_perfmon rep_good nopl xtopology cpuid tsc_known_freq pni vmx ssse3 cx16 sse4_1 sse4_2 x2apic popcnt tsc_deadline_timer hypervisor lahf_lm cpuid_fault pti ssbd ibrs ibpb tpr_shadow vnmi flexpriority ept vpid tsc_adjust arat umip arch_capabilities
[root@localhost ~]# cat /sys/devices/system/node/online
0
[root@localhost ~]# cat /sys/devices/system/node/possible
0-1
---------------------------------------------------------------------------------
I also tried
qemu-system-x86_64 -enable-kvm -m 4G,maxmem=20G,slots=2 -smp sockets=2,cores=2 -cpu host -numa node,nodeid=1,cpus=0-3,mem=4G -numa node,nodeid=0,mem=0G -vga none -nographic -serial mon:stdio /home/srikar/fedora.qcow2
and the resulting guest was.
[root@localhost ~]# numactl -H
available: 1 nodes (0)
node 0 cpus: 0 1 2 3
node 0 size: 3927 MB
node 0 free: 3316 MB
node distances:
node 0
0: 10
[root@localhost ~]# lscpu
Architecture: x86_64
CPU op-mode(s): 32-bit, 64-bit
Byte Order: Little Endian
Address sizes: 40 bits physical, 48 bits virtual
CPU(s): 4
On-line CPU(s) list: 0-3
Thread(s) per core: 1
Core(s) per socket: 2
Socket(s): 2
NUMA node(s): 1
Vendor ID: GenuineIntel
CPU family: 6
Model: 46
Model name: Intel(R) Xeon(R) CPU X7560 @ 2.27GHz
Stepping: 6
CPU MHz: 2260.986
BogoMIPS: 4521.97
Virtualization: VT-x
Hypervisor vendor: KVM
Virtualization type: full
L1d cache: 32K
L1i cache: 32K
L2 cache: 4096K
L3 cache: 16384K
NUMA node0 CPU(s): 0-3
Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx rdtscp lm constant_tsc arch_perfmon rep_good nopl xtopology cpuid tsc_known_freq pni vmx ssse3 cx16 sse4_1 sse4_2 x2apic popcnt tsc_deadline_timer hypervisor lahf_lm cpuid_fault pti ssbd ibrs ibpb tpr_shadow vnmi flexpriority ept vpid tsc_adjust arat umip arch_capabilities
[root@localhost ~]# cat /sys/devices/system/node/online
0
[root@localhost ~]# cat /sys/devices/system/node/possible
0-1
Even without my patch, both the combinations, I am still unable to see a
cpuless, memoryless node being online. And the interesting part being even
if I mark node 0 as cpuless,memoryless and node 1 as actual node, the system
somewhere marks node 0 as the actual node.
>
> David / dhildenb
>
--
Thanks and Regards
Srikar Dronamraju
next prev parent reply other threads:[~2020-05-11 17:53 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-04-28 9:38 [PATCH v2 0/3] Offline memoryless cpuless node 0 Srikar Dronamraju
2020-04-28 9:38 ` [PATCH v2 1/3] powerpc/numa: Set numa_node for all possible cpus Srikar Dronamraju
2020-04-28 9:38 ` [PATCH v2 2/3] powerpc/numa: Prefer node id queried from vphn Srikar Dronamraju
2020-04-29 6:52 ` Gautham R Shenoy
2020-04-30 4:34 ` Srikar Dronamraju
2020-04-28 9:38 ` [PATCH v2 3/3] mm/page_alloc: Keep memoryless cpuless node 0 offline Srikar Dronamraju
2020-04-28 23:59 ` Andrew Morton
2020-04-29 1:41 ` Srikar Dronamraju
2020-04-29 12:22 ` Michal Hocko
2020-04-30 7:18 ` Srikar Dronamraju
2020-05-04 9:37 ` Michal Hocko
2020-05-08 13:03 ` Srikar Dronamraju
2020-05-08 13:39 ` David Hildenbrand
2020-05-08 13:42 ` David Hildenbrand
2020-05-11 17:47 ` Srikar Dronamraju [this message]
2020-05-12 7:49 ` David Hildenbrand
2020-05-12 10:42 ` Srikar Dronamraju
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200511174731.GD1961@linux.vnet.ibm.com \
--to=srikar@linux.vnet.ibm.com \
--cc=akpm@linux-foundation.org \
--cc=cl@linux.com \
--cc=david@redhat.com \
--cc=kirill@shutemov.name \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=mgorman@suse.de \
--cc=mhocko@kernel.org \
--cc=torvalds@linux-foundation.org \
--cc=vbabka@suse.cz \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).