linuxppc-dev.lists.ozlabs.org archive mirror
 help / color / mirror / Atom feed
* [PATCH v17 0/6] powerpc/crash: Kernel handling of CPU and memory hotplug
@ 2024-02-26  8:41 Sourabh Jain
  2024-02-26  8:41 ` [PATCH v17 1/6] crash: forward memory_notify arg to arch crash hotplug handler Sourabh Jain
                   ` (6 more replies)
  0 siblings, 7 replies; 18+ messages in thread
From: Sourabh Jain @ 2024-02-26  8:41 UTC (permalink / raw)
  To: linuxppc-dev
  Cc: David Hildenbrand, Dave Hansen, Mimi Zohar, Boris Ostrovsky,
	Valentin Schneider, Baoquan He, x86, Aneesh Kumar K . V,
	Laurent Dufour, Dave Young, Vivek Goyal, Naveen N Rao,
	Borislav Petkov, Thomas Gleixner, Hari Bathini, Oscar Salvador,
	Greg Kroah-Hartman, kexec, Mahesh Salgaonkar, Sourabh Jain,
	Akhil Raj, Andrew Morton

Commit 247262756121 ("crash: add generic infrastructure for crash
hotplug support") added a generic infrastructure that allows
architectures to selectively update the kdump image component during CPU
or memory add/remove events within the kernel itself.

This patch series adds crash hotplug handler for PowerPC and enable
support to update the kdump image on CPU/Memory add/remove events.

Among the 5 patches in this series, the first two patches make changes
to the generic crash hotplug handler to assist PowerPC in adding support
for this feature. The last three patches add support for this feature.

The following section outlines the problem addressed by this patch
series, along with the current solution, its shortcomings, and the
proposed resolution.

Problem:
========
Due to CPU/Memory hotplug or online/offline events the elfcorehdr
(which describes the CPUs and memory of the crashed kernel) and FDT
(Flattened Device Tree) of kdump image becomes outdated. Consequently,
attempting dump collection with an outdated elfcorehdr or FDT can lead
to failed or inaccurate dump collection.

Going forward CPU hotplug or online/offline events are referred as
CPU/Memory add/remove events.

Existing solution and its shortcoming:
======================================
The current solution to address the above issue involves monitoring the
CPU/memory add/remove events in userspace using udev rules and whenever
there are changes in CPU and memory resources, the entire kdump image
is loaded again. The kdump image includes kernel, initrd, elfcorehdr,
FDT, purgatory. Given that only elfcorehdr and FDT get outdated due to
CPU/Memory add/remove events, reloading the entire kdump image is
inefficient. More importantly, kdump remains inactive for a substantial
amount of time until the kdump reload completes.

Proposed solution:
==================
Instead of initiating a full kdump image reload from userspace on
CPU/Memory hotplug and online/offline events, the proposed solution aims
to update only the necessary kdump image component within the kernel
itself.

Git tree for testing:
=====================
https://github.com/sourabhjains/linux/tree/kdump-in-kernel-crash-update-v17

Above tree is rebased on top of linux-next and the below patch series:
https://lore.kernel.org/all/20240213113150.1148276-1-hbathini@linux.ibm.com/

To realize this feature, the kdump udev rule must be updated. On RHEL,
add the following two lines at the top of the
"/usr/lib/udev/rules.d/98-kexec.rules" file.

SUBSYSTEM=="cpu", ATTRS{crash_hotplug}=="1", GOTO="kdump_reload_end"
SUBSYSTEM=="memory", ATTRS{crash_hotplug}=="1", GOTO="kdump_reload_end"

With the above change to the kdump udev rule, kdump reload is avoided
during CPU/Memory add/remove events if this feature is enabled in the
kernel.

Note: only kexec_file_load syscall will work. For kexec_load minor changes
are required in kexec tool.

Changelog:
----------
v17:
  - Rebase the patch series on top linux-next tree and below patch series
    https://lore.kernel.org/all/20240213113150.1148276-1-hbathini@linux.ibm.com/
  - Split 0003 patch from v16 into two patches
       1. Move get_crash_memory_ranges() along with other *_memory_ranges()
          functions to ranges.c and make them public.
       2. Make update_cpus_node function public and take this function
          out of file_load_64.c
  - Keep arch_crash_hotplug_support in crash.c instead of core_64.c [05/06]
  - Use CONFIG_CRASH_MAX_MEMORY_RANGES to find extra elfcorehdr size [06/06]

v16: [https://lore.kernel.org/all/20240217081452.164571-1-sourabhjain@linux.ibm.com/]
  - Remove the unused #define `crash_hotplug_cpu_support`
    and `crash_hotplug_memory_support` in `arch/x86/include/asm/kexec.h`.
  - Document why two kexec flag bits are used in
    `arch_crash_hotplug_memory_support` (x86).
  - Use a switch case to handle different hotplug operations
    in `arch_crash_handle_hotplug_event` for PowerPC.
  - Fix a typo in 4/5.

v15:
  - Remove the patch that adds a new kexec flag for FDT update.
  - Introduce a generic kexec flag bit to share hotplug support
    intent between the kexec tool and the kernel for the kexec_load
    syscall. (2/5)
  - Introduce an architecture-specific handler to process the kexec
    flag for crash hotplug support. (2/5)
  - Rename the @update_elfcorehdr member of the struct kimage to
    @hotplug_support. (2/5)
  - Use a common function to advertise hotplug support for both CPU
    and Memory. (2/5)

v14:
  - Fix build warnings by including necessary header files
  - Rebase to v6.7-rc5

v13:
  - Fix a build warning, take ranges.c out of CONFIG_KEXEC_FILE
  - Rebase to v6.7-rc4

v12:
  - A patch to add new kexec flags to support this feature on kexec_load
    system call
  - Change in the way this feature is advertise to userspace for both
    kexec_load syscall
  - Rebase to v6.6-rc7

v11:
  - Rebase to v6.4-rc6
  - The patch that introduced CONFIG_CRASH_HOTPLUG for PowerPC has been
    removed. The config is now part of common configuration:
    https://lore.kernel.org/all/87ilbpflsk.fsf@mail.lhotse/

v10:
  - Drop the patch that adds fdt_index attribute to struct kimage_arch
    Find the fdt segment index when needed.
  - Added more details into commits messages.
  - Rebased onto 6.3.0-rc5

v9:
  - Removed patch to prepare elfcorehdr crash notes for possible CPUs.
    The patch is moved to generic patch series that introduces generic
    infrastructure for in kernel crash update.
  - Removed patch to pass the hotplug action type to the arch crash
    hotplug handler function. The generic patch series has introduced
    the hotplug action type in kimage struct.
  - Add detail commit message for better understanding.

v8:
  - Restrict fdt_index initialization to machine_kexec_post_load
    it work for both kexec_load and kexec_file_load.[3/8] Laurent Dufour

  - Updated the logic to find the number of offline core. [6/8]

  - Changed the logic to find the elfcore program header to accommodate
    future memory ranges due memory hotplug events. [8/8]

v7
  - added a new config to configure this feature
  - pass hotplug action type to arch specific handler

v6
  - Added crash memory hotplug support

v5:
  - Replace COFNIG_CRASH_HOTPLUG with CONFIG_HOTPLUG_CPU.
  - Move fdt segment identification for kexec_load case to load path
    instead of crash hotplug handler
  - Keep new attribute defined under kimage_arch to track FDT segment
    under CONFIG_HOTPLUG_CPU config.

v4:
  - Update the logic to find the additional space needed for hotadd CPUs
    post kexec load. Refer "[RFC v4 PATCH 4/5] powerpc/crash hp: add crash
    hotplug support for kexec_file_load" patch to know more about the
    change.
  - Fix a couple of typo.
  - Replace pr_err to pr_info_once to warn user about memory hotplug
    support.
  - In crash hotplug handle exit the for loop if FDT segment is found.

v3
  - Move fdt_index and fdt_index_vaild variables to kimage_arch struct.
  - Rebase patche on top of
    https://lore.kernel.org/lkml/20220303162725.49640-1-eric.devolder@oracle.com/
  - Fixed warning reported by checpatch script

v2:
  - Use generic hotplug handler introduced by
    https://lore.kernel.org/lkml/20220209195706.51522-1-eric.devolder@oracle.com/
    a significant change from v1.

Cc: Akhil Raj <lf32.dev@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Aneesh Kumar K.V <aneesh.kumar@kernel.org>
Cc: Baoquan He <bhe@redhat.com>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Hari Bathini <hbathini@linux.ibm.com>
Cc: Laurent Dufour <laurent.dufour@fr.ibm.com>
Cc: Mahesh Salgaonkar <mahesh@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Mimi Zohar <zohar@linux.ibm.com>
Cc: Naveen N Rao <naveen@kernel.org>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Valentin Schneider <vschneid@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: kexec@lists.infradead.org
Cc: x86@kernel.org

Sourabh Jain (6):
  crash: forward memory_notify arg to arch crash hotplug handler
  crash: add a new kexec flag for hotplug support
  powerpc/kexec: move *_memory_ranges functions to ranges.c
  PowerPC/kexec: make the update_cpus_node() function public
  powerpc/crash: add crash CPU hotplug support
  powerpc/crash: add crash memory hotplug support

 arch/powerpc/Kconfig                    |   4 +
 arch/powerpc/include/asm/kexec.h        |  15 ++
 arch/powerpc/include/asm/kexec_ranges.h |  20 +-
 arch/powerpc/kexec/Makefile             |   4 +-
 arch/powerpc/kexec/core_64.c            |  91 +++++++
 arch/powerpc/kexec/crash.c              | 196 +++++++++++++++
 arch/powerpc/kexec/elf_64.c             |   3 +-
 arch/powerpc/kexec/file_load_64.c       | 314 +++---------------------
 arch/powerpc/kexec/ranges.c             | 312 ++++++++++++++++++++++-
 arch/x86/include/asm/kexec.h            |  13 +-
 arch/x86/kernel/crash.c                 |  32 ++-
 drivers/base/cpu.c                      |   2 +-
 drivers/base/memory.c                   |   2 +-
 include/linux/crash_core.h              |  15 +-
 include/linux/kexec.h                   |  11 +-
 include/uapi/linux/kexec.h              |   1 +
 kernel/crash_core.c                     |  25 +-
 kernel/kexec.c                          |   4 +-
 kernel/kexec_file.c                     |   5 +
 19 files changed, 712 insertions(+), 357 deletions(-)

-- 
2.43.0


^ permalink raw reply	[flat|nested] 18+ messages in thread
* Re: [PATCH v17 5/6] powerpc/crash: add crash CPU hotplug support
@ 2024-03-02 13:18 Hari Bathini
  0 siblings, 0 replies; 18+ messages in thread
From: Hari Bathini @ 2024-03-02 13:18 UTC (permalink / raw)
  To: Sourabh Jain, linuxppc-dev
  Cc: David Hildenbrand, Dave Hansen, Mimi Zohar, Boris Ostrovsky,
	Valentin Schneider, Baoquan He, x86, Aneesh Kumar K . V,
	Laurent Dufour, Dave Young, Vivek Goyal, Naveen N Rao,
	Borislav Petkov, Thomas Gleixner, Oscar Salvador,
	Greg Kroah-Hartman, kexec, Mahesh Salgaonkar, Akhil Raj,
	Andrew Morton



On 26/02/24 2:11 pm, Sourabh Jain wrote:
> Due to CPU/Memory hotplug or online/offline events, the elfcorehdr
> (which describes the CPUs and memory of the crashed kernel) and FDT
> (Flattened Device Tree) of kdump image becomes outdated. Consequently,
> attempting dump collection with an outdated elfcorehdr or FDT can lead
> to failed or inaccurate dump collection.
> 
> Going forward, CPU hotplug or online/offline events are referred as
> CPU/Memory add/remove events.
> 
> The current solution to address the above issue involves monitoring the
> CPU/Memory add/remove events in userspace using udev rules and whenever
> there are changes in CPU and memory resources, the entire kdump image
> is loaded again. The kdump image includes kernel, initrd, elfcorehdr,
> FDT, purgatory. Given that only elfcorehdr and FDT get outdated due to
> CPU/Memory add/remove events, reloading the entire kdump image is
> inefficient. More importantly, kdump remains inactive for a substantial
> amount of time until the kdump reload completes.
> 
> To address the aforementioned issue, commit 247262756121 ("crash: add
> generic infrastructure for crash hotplug support") added a generic
> infrastructure that allows architectures to selectively update the kdump
> image component during CPU or memory add/remove events within the kernel
> itself.
> 
> In the event of a CPU or memory add/remove events, the generic crash
> hotplug event handler, `crash_handle_hotplug_event()`, is triggered. It
> then acquires the necessary locks to update the kdump image and invokes
> the architecture-specific crash hotplug handler,
> `arch_crash_handle_hotplug_event()`, to update the required kdump image
> components.
> 
> This patch adds crash hotplug handler for PowerPC and enable support to
> update the kdump image on CPU add/remove events. Support for memory
> add/remove events is added in a subsequent patch with the title
> "powerpc: add crash memory hotplug support"
> 
> As mentioned earlier, only the elfcorehdr and FDT kdump image components
> need to be updated in the event of CPU or memory add/remove events.
> However, on PowerPC architecture crash hotplug handler only updates the
> FDT to enable crash hotplug support for CPU add/remove events. Here's
> why.
> 
> The elfcorehdr on PowerPC is built with possible CPUs, and thus, it does
> not need an update on CPU add/remove events. On the other hand, the FDT
> needs to be updated on CPU add events to include the newly added CPU. If
> the FDT is not updated and the kernel crashes on a newly added CPU, the
> kdump kernel will fail to boot due to the unavailability of the crashing
> CPU in the FDT. During the early boot, it is expected that the boot CPU
> must be a part of the FDT; otherwise, the kernel will raise a BUG and
> fail to boot. For more information, refer to commit 36ae37e3436b0
> ("powerpc: Make boot_cpuid common between 32 and 64-bit"). Since it is
> okay to have an offline CPU in the kdump FDT, no action is taken in case
> of CPU removal.
> 
> There are two system calls, `kexec_file_load` and `kexec_load`, used to
> load the kdump image. Few changes have been made to ensure kernel can
> safely update the FDT of kdump image loaded using both system calls.
> 
> For kexec_file_load syscall the kdump image is prepared in kernel. So to
> support an increasing number of CPUs, the FDT is constructed with extra
> buffer space to ensure it can accommodate a possible number of CPU
> nodes. Additionally, a call to fdt_pack (which trims the unused space
> once the FDT is prepared) is avoided if this feature is enabled.
> 
> For the kexec_load syscall, the FDT is updated only if the
> KEXEC_CRASH_HOTPLUG_SUPPORT kexec flag is passed to the kernel by
> userspace (kexec tools). When userspace passes this flag to the kernel,
> it indicates that the FDT is built to accommodate possible CPUs, and the
> FDT segment is excluded from SHA calculation, making it safe to update.
> 
> The changes related to this feature are kept under the CRASH_HOTPLUG
> config, and it is enabled by default.
> 

Looks good.

Acked-by: Hari Bathini <hbathini@linux.ibm.com>

> Signed-off-by: Sourabh Jain <sourabhjain@linux.ibm.com>
> Cc: Akhil Raj <lf32.dev@gmail.com>
> Cc: Andrew Morton <akpm@linux-foundation.org>
> Cc: Aneesh Kumar K.V <aneesh.kumar@kernel.org>
> Cc: Baoquan He <bhe@redhat.com>
> Cc: Borislav Petkov (AMD) <bp@alien8.de>
> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
> Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
> Cc: Dave Hansen <dave.hansen@linux.intel.com>
> Cc: Dave Young <dyoung@redhat.com>
> Cc: David Hildenbrand <david@redhat.com>
> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> Cc: Hari Bathini <hbathini@linux.ibm.com>
> Cc: Laurent Dufour <laurent.dufour@fr.ibm.com>
> Cc: Mahesh Salgaonkar <mahesh@linux.ibm.com>
> Cc: Michael Ellerman <mpe@ellerman.id.au>
> Cc: Mimi Zohar <zohar@linux.ibm.com>
> Cc: Naveen N Rao <naveen@kernel.org>
> Cc: Oscar Salvador <osalvador@suse.de>
> Cc: Thomas Gleixner <tglx@linutronix.de>
> Cc: Valentin Schneider <vschneid@redhat.com>
> Cc: Vivek Goyal <vgoyal@redhat.com>
> Cc: kexec@lists.infradead.org
> Cc: x86@kernel.org
> ---
>   arch/powerpc/Kconfig              |   4 ++
>   arch/powerpc/include/asm/kexec.h  |   8 +++
>   arch/powerpc/kexec/crash.c        | 103 ++++++++++++++++++++++++++++++
>   arch/powerpc/kexec/elf_64.c       |   3 +-
>   arch/powerpc/kexec/file_load_64.c |  17 +++++
>   5 files changed, 134 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
> index e377deefa2dc..16d2b20574c4 100644
> --- a/arch/powerpc/Kconfig
> +++ b/arch/powerpc/Kconfig
> @@ -686,6 +686,10 @@ config ARCH_SELECTS_CRASH_DUMP
>   	depends on CRASH_DUMP
>   	select RELOCATABLE if PPC64 || 44x || PPC_85xx
>   
> +config ARCH_SUPPORTS_CRASH_HOTPLUG
> +	def_bool y
> +	depends on PPC64
> +
>   config FA_DUMP
>   	bool "Firmware-assisted dump"
>   	depends on CRASH_DUMP && PPC64 && (PPC_RTAS || PPC_POWERNV)
> diff --git a/arch/powerpc/include/asm/kexec.h b/arch/powerpc/include/asm/kexec.h
> index d9ff4d0e392d..e75970351bcd 100644
> --- a/arch/powerpc/include/asm/kexec.h
> +++ b/arch/powerpc/include/asm/kexec.h
> @@ -135,6 +135,14 @@ static inline void crash_setup_regs(struct pt_regs *newregs,
>   		ppc_save_regs(newregs);
>   }
>   
> +#ifdef CONFIG_CRASH_HOTPLUG
> +void arch_crash_handle_hotplug_event(struct kimage *image, void *arg);
> +#define arch_crash_handle_hotplug_event arch_crash_handle_hotplug_event
> +
> +int arch_crash_hotplug_support(struct kimage *image, unsigned long kexec_flags);
> +#define arch_crash_hotplug_support arch_crash_hotplug_support
> +#endif /* CONFIG_CRASH_HOTPLUG */
> +
>   extern int crashing_cpu;
>   extern void crash_send_ipi(void (*crash_ipi_callback)(struct pt_regs *));
>   extern void crash_ipi_callback(struct pt_regs *regs);
> diff --git a/arch/powerpc/kexec/crash.c b/arch/powerpc/kexec/crash.c
> index ef5c2d25ec39..8938a19af12f 100644
> --- a/arch/powerpc/kexec/crash.c
> +++ b/arch/powerpc/kexec/crash.c
> @@ -16,6 +16,7 @@
>   #include <linux/delay.h>
>   #include <linux/irq.h>
>   #include <linux/types.h>
> +#include <linux/libfdt.h>
>   
>   #include <asm/processor.h>
>   #include <asm/machdep.h>
> @@ -392,3 +393,105 @@ void default_machine_crash_shutdown(struct pt_regs *regs)
>   	if (ppc_md.kexec_cpu_down)
>   		ppc_md.kexec_cpu_down(1, 0);
>   }
> +
> +#ifdef CONFIG_CRASH_HOTPLUG
> +#undef pr_fmt
> +#define pr_fmt(fmt) "crash hp: " fmt
> +
> +/**
> + * get_fdt_index - Loop through the kexec segment array and find
> + *		   the index of the FDT segment.
> + * @image: a pointer to kexec_crash_image
> + *
> + * Returns the index of FDT segment in the kexec segment array
> + * if found; otherwise -1.
> + */
> +static int get_fdt_index(struct kimage *image)
> +{
> +	void *ptr;
> +	unsigned long mem;
> +	int i, fdt_index = -1;
> +
> +	/* Find the FDT segment index in kexec segment array. */
> +	for (i = 0; i < image->nr_segments; i++) {
> +		mem = image->segment[i].mem;
> +		ptr = __va(mem);
> +
> +		if (ptr && fdt_magic(ptr) == FDT_MAGIC) {
> +			fdt_index = i;
> +			break;
> +		}
> +	}
> +
> +	return fdt_index;
> +}
> +
> +/**
> + * update_crash_fdt - updates the cpus node of the crash FDT.
> + *
> + * @image: a pointer to kexec_crash_image
> + */
> +static void update_crash_fdt(struct kimage *image)
> +{
> +	void *fdt;
> +	int fdt_index;
> +
> +	fdt_index = get_fdt_index(image);
> +	if (fdt_index < 0) {
> +		pr_err("Unable to locate FDT segment.\n");
> +		return;
> +	}
> +
> +	fdt = __va((void *)image->segment[fdt_index].mem);
> +
> +	/* Temporarily invalidate the crash image while it is replaced */
> +	xchg(&kexec_crash_image, NULL);
> +
> +	/* update FDT to reflect changes in CPU resources */
> +	if (update_cpus_node(fdt))
> +		pr_err("Failed to update crash FDT");
> +
> +	/* The crash image is now valid once again */
> +	xchg(&kexec_crash_image, image);
> +}
> +
> +int arch_crash_hotplug_support(struct kimage *image, unsigned long kexec_flags)
> +{
> +#ifdef CONFIG_KEXEC_FILE
> +	if (image->file_mode)
> +		return 1;
> +#endif
> +	return kexec_flags & KEXEC_CRASH_HOTPLUG_SUPPORT;
> +}
> +
> +/**
> + * arch_crash_handle_hotplug_event - Handle crash CPU/Memory hotplug events to update the
> + *				     necessary kexec segments based on the hotplug event.
> + * @image: a pointer to kexec_crash_image
> + * @arg: struct memory_notify handler for memory hotplug case and NULL for CPU hotplug case.
> + *
> + * Update the kdump image based on the type of hotplug event, represented by image->hp_action.
> + * CPU add: Update the FDT segment to include the newly added CPU.
> + * CPU remove: No action is needed, with the assumption that it's okay to have offline CPUs
> + *	       part of the FDT.
> + * Memory add/remove: No action is taken as this is not yet supported.
> + */
> +void arch_crash_handle_hotplug_event(struct kimage *image, void *arg)
> +{
> +	switch (image->hp_action) {
> +	case KEXEC_CRASH_HP_REMOVE_CPU:
> +		return;
> +
> +	case KEXEC_CRASH_HP_ADD_CPU:
> +		update_crash_fdt(image);
> +		break;
> +
> +	case KEXEC_CRASH_HP_REMOVE_MEMORY:
> +	case KEXEC_CRASH_HP_ADD_MEMORY:
> +		pr_info_once("Crash update is not supported for memory hotplug\n");
> +		return;
> +	default:
> +		pr_warn_once("Unknown hotplug action\n");
> +	}
> +}
> +#endif /* CONFIG_CRASH_HOTPLUG */
> diff --git a/arch/powerpc/kexec/elf_64.c b/arch/powerpc/kexec/elf_64.c
> index 6d8951e8e966..214c071c58ed 100644
> --- a/arch/powerpc/kexec/elf_64.c
> +++ b/arch/powerpc/kexec/elf_64.c
> @@ -116,7 +116,8 @@ static void *elf64_load(struct kimage *image, char *kernel_buf,
>   	if (ret)
>   		goto out_free_fdt;
>   
> -	fdt_pack(fdt);
> +	if (!IS_ENABLED(CONFIG_CRASH_HOTPLUG) || image->type != KEXEC_TYPE_CRASH)
> +		fdt_pack(fdt);
>   
>   	kbuf.buffer = fdt;
>   	kbuf.bufsz = kbuf.memsz = fdt_totalsize(fdt);
> diff --git a/arch/powerpc/kexec/file_load_64.c b/arch/powerpc/kexec/file_load_64.c
> index 4b94c31e3172..2640a804fcdf 100644
> --- a/arch/powerpc/kexec/file_load_64.c
> +++ b/arch/powerpc/kexec/file_load_64.c
> @@ -30,6 +30,7 @@
>   #include <asm/iommu.h>
>   #include <asm/prom.h>
>   #include <asm/plpks.h>
> +#include <asm/cputhreads.h>
>   
>   struct umem_info {
>   	__be64 *buf;		/* data buffer for usable-memory property */
> @@ -789,6 +790,9 @@ static unsigned int kdump_extra_fdt_size_ppc64(struct kimage *image)
>   	unsigned int cpu_nodes, extra_size = 0;
>   	struct device_node *dn;
>   	u64 usm_entries;
> +#ifdef CONFIG_CRASH_HOTPLUG
> +	unsigned int possible_cpu_nodes;
> +#endif
>   
>   	if (!IS_ENABLED(CONFIG_CRASH_DUMP) || image->type != KEXEC_TYPE_CRASH)
>   		return 0;
> @@ -816,6 +820,19 @@ static unsigned int kdump_extra_fdt_size_ppc64(struct kimage *image)
>   	if (cpu_nodes > boot_cpu_node_count)
>   		extra_size += (cpu_nodes - boot_cpu_node_count) * cpu_node_size();
>   
> +#ifdef CONFIG_CRASH_HOTPLUG
> +	/*
> +	 * Make sure enough space is reserved to accommodate possible CPU nodes
> +	 * in the crash FDT. This allows packing possible CPU nodes which are
> +	 * not yet present in the system without regenerating the entire FDT.
> +	 */
> +	if (image->type == KEXEC_TYPE_CRASH) {
> +		possible_cpu_nodes = num_possible_cpus() / threads_per_core;
> +		if (possible_cpu_nodes > cpu_nodes)
> +			extra_size += (possible_cpu_nodes - cpu_nodes) * cpu_node_size();
> +	}
> +#endif
> +
>   	return extra_size;
>   }
>   

^ permalink raw reply	[flat|nested] 18+ messages in thread

end of thread, other threads:[~2024-03-02 13:22 UTC | newest]

Thread overview: 18+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2024-02-26  8:41 [PATCH v17 0/6] powerpc/crash: Kernel handling of CPU and memory hotplug Sourabh Jain
2024-02-26  8:41 ` [PATCH v17 1/6] crash: forward memory_notify arg to arch crash hotplug handler Sourabh Jain
2024-02-26  8:41 ` [PATCH v17 2/6] crash: add a new kexec flag for hotplug support Sourabh Jain
2024-02-29  5:05   ` Sourabh Jain
2024-02-29  5:56     ` Baoquan He
2024-02-29  7:58       ` Sourabh Jain
2024-02-29  7:28   ` Baoquan He
2024-02-29  8:14     ` Sourabh Jain
2024-02-29  8:34     ` Sourabh Jain
2024-02-26  8:41 ` [PATCH v17 3/6] powerpc/kexec: move *_memory_ranges functions to ranges.c Sourabh Jain
2024-02-29  8:11   ` Baoquan He
2024-02-29  8:16     ` Sourabh Jain
2024-02-26  8:41 ` [PATCH v17 4/6] PowerPC/kexec: make the update_cpus_node() function public Sourabh Jain
2024-02-26  8:41 ` [PATCH v17 5/6] powerpc/crash: add crash CPU hotplug support Sourabh Jain
2024-02-26  8:41 ` [PATCH v17 6/6] powerpc/crash: add crash memory " Sourabh Jain
2024-02-29 13:51 ` [PATCH v17 0/6] powerpc/crash: Kernel handling of CPU and memory hotplug Baoquan He
2024-03-01  5:13   ` Sourabh Jain
2024-03-02 13:18 [PATCH v17 5/6] powerpc/crash: add crash CPU hotplug support Hari Bathini

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).