* Problem with console init
@ 2009-01-27 9:54 Eduard Fuchs
0 siblings, 0 replies; 2+ messages in thread
From: Eduard Fuchs @ 2009-01-27 9:54 UTC (permalink / raw)
To: linuxppc-dev
Hi all,
I'm working on porting of a Linux Kernel ( Linux-2.6.27-rc5) on an
MPC7448 & Marvell 64460 based PowerPC system. At kernel booting,
messages seems as usually on the serial output. Nevertheless at loading
of the system trough NFS, appears only printk messages from the kernel.
By trying to connect with the system via Telnet, returns following error
„telnetd: getpty: No such file or directory“. Node files in „/dev“ are
existing and the same system works just fine with an older Kernel (2.6.12).
The kernel is started with follows parameters (DTS-file):
bootargs = "console=/dev/ttyS0,115200 root=/dev/nfs
nfsroot=192.168.101.87:/mnt/share/uroot
ip=192.168.102.115:192.168.101.87:192.168.100.1:255.255.252.0:board5:eth0:off";
linux,stdout-path = "/system-controller@fbe00000/serial@12000";
May be somebody can give to me some tips, where can be my eventual
problem, or where I have search for errors! If it is necessary, I can
post more information.
Thank you in advance
Best regards,
Eduard Fuchs
--
Eduard Fuchs Telefon: +49 (561) 804-6596
Universität Kassel Fax: +49 (561) 804-6588
Wilhelmshöher Allee 71 E-Mail: edfuchs@uni-kassel.de
34121 Kassel WWW: http://www.rs.eecs.uni-kassel.de
Raum 1125:1127 FG Rechnerarchitektur und Systemprogrammierung
^ permalink raw reply [flat|nested] 2+ messages in thread
* Problem with console init
@ 2009-01-27 13:06 Eduard Fuchs
0 siblings, 0 replies; 2+ messages in thread
From: Eduard Fuchs @ 2009-01-27 13:06 UTC (permalink / raw)
To: linuxppc-dev
Hi all,
I'm working on porting of a Linux Kernel ( Linux-2.6.27-rc5) on an
MPC7448 & Marvell 64460 based PowerPC system. At kernel booting,
messages seems as usually on the serial output. Nevertheless at loading
of the system trough NFS, appears only printk messages from the kernel.
By trying to connect with the system via Telnet, returns following error
„telnetd: getpty: No such file or directory“. Node files in „/dev“ are
existing and the same system works just fine with an older Kernel (2.6.12).
The kernel is started with follows parameters (DTS-file):
bootargs = "console=/dev/ttyS0,115200 root=/dev/nfs
nfsroot=192.168.101.87:/mnt/share/uroot
ip=192.168.102.115:192.168.101.87:192.168.100.1:255.255.252.0:board5:eth0:off";
linux,stdout-path = "/system-controller@fbe00000/serial@12000";
May be somebody can give to me some tips, where can be my eventual
problem, or where I have search for errors! If it is necessary, I can
post more information.
Thank you in advance
Best regards,
Eduard Fuchs
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2009-01-27 13:25 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2009-01-27 9:54 Problem with console init Eduard Fuchs
2009-01-27 13:06 Eduard Fuchs
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).