* [PATCH v2 0/2] powerpc: define and implement MPIC message register support
@ 2011-05-20 16:36 Meador Inge
2011-05-20 16:36 ` [PATCH v2 1/2] powerpc: document the FSL MPIC message register binding Meador Inge
` (2 more replies)
0 siblings, 3 replies; 7+ messages in thread
From: Meador Inge @ 2011-05-20 16:36 UTC (permalink / raw)
To: linuxppc-dev; +Cc: openmcapi-dev, devicetree-discuss, Hollis Blanchard
This patch set defines a binding for FSL MPIC message registers and implements
an API for accessing those message registers. Testing was done on a MPC8572DS
in an Linux-Linux AMP setup using OpenMCAPI (www.openmcapi.org) to communicate
between OS instances. The message register API is used by the OpenMCAPI shared
memory driver to send notifications between cores.
* v2 - Incorporate feedback from Scott Wood
* Make binding less implementation specific.
* Add 'mpic-' prefix to message register node properties and aliases.
* Remove 'interrupt-parent' from binding.
* Fixed some example bugs with receive masks.
Signed-off-by: Meador Inge <meador_inge@mentor.com>
Cc: Hollis Blanchard <hollis_blanchard@mentor.com>
Meador Inge (2):
powerpc: document the FSL MPIC message register binding
powerpc: add support for MPIC message register API
.../devicetree/bindings/powerpc/fsl/mpic-msgr.txt | 62 +++++
arch/powerpc/include/asm/mpic_msgr.h | 35 +++
arch/powerpc/platforms/Kconfig | 8 +
arch/powerpc/sysdev/Makefile | 3 +-
arch/powerpc/sysdev/mpic_msgr.c | 279 ++++++++++++++++++++
5 files changed, 386 insertions(+), 1 deletions(-)
create mode 100644 Documentation/devicetree/bindings/powerpc/fsl/mpic-msgr.txt
create mode 100644 arch/powerpc/include/asm/mpic_msgr.h
create mode 100644 arch/powerpc/sysdev/mpic_msgr.c
^ permalink raw reply [flat|nested] 7+ messages in thread
* [PATCH v2 1/2] powerpc: document the FSL MPIC message register binding
2011-05-20 16:36 [PATCH v2 0/2] powerpc: define and implement MPIC message register support Meador Inge
@ 2011-05-20 16:36 ` Meador Inge
2011-05-26 20:03 ` Scott Wood
2011-05-26 20:06 ` Scott Wood
2011-05-20 16:36 ` [PATCH v2 2/2] powerpc: add support for MPIC message register API Meador Inge
[not found] ` <BANLkTikvDEG4DSvVMtxa8=i=NV=o=DQLXA@mail.gmail.com>
2 siblings, 2 replies; 7+ messages in thread
From: Meador Inge @ 2011-05-20 16:36 UTC (permalink / raw)
To: linuxppc-dev; +Cc: openmcapi-dev, devicetree-discuss, Hollis Blanchard
This binding documents how the message register blocks found in some FSL
MPIC implementations shall be represented in a device tree.
Signed-off-by: Meador Inge <meador_inge@mentor.com>
Cc: Hollis Blanchard <hollis_blanchard@mentor.com>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
.../devicetree/bindings/powerpc/fsl/mpic-msgr.txt | 62 ++++++++++++++++++++
1 files changed, 62 insertions(+), 0 deletions(-)
create mode 100644 Documentation/devicetree/bindings/powerpc/fsl/mpic-msgr.txt
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/mpic-msgr.txt b/Documentation/devicetree/bindings/powerpc/fsl/mpic-msgr.txt
new file mode 100644
index 0000000..385dba6
--- /dev/null
+++ b/Documentation/devicetree/bindings/powerpc/fsl/mpic-msgr.txt
@@ -0,0 +1,62 @@
+* FSL MPIC Message Registers
+
+This binding specifies what properties must be available in the device tree
+representation of the message register groups found in some FSL MPIC
+implementations.
+
+Required properties:
+
+ - compatible: Specifies the compatibility list for the message register
+ block. The type shall be <string> and the value shall be of the form
+ "fsl,mpic-v<version>-msgr", where <version> is the version number of
+ the MPIC containing the message registers.
+
+ - reg: Specifies the base physical address(s) and size(s) of the
+ message register block's addressable register space. The type shall be
+ <prop-encoded-array>.
+
+ - interrupts: Specifies a list of interrupt source and level-sense pairs.
+ The type shall be <prop-encoded-array>. The length shall be equal to
+ the number of bits set in the 'msg-receive-mask' property value.
+
+Optional properties:
+
+ - mpic-msgr-receive-mask: Specifies what registers in the containing block
+ are allowed to receive interrupts. The value is a bit mask where a set
+ bit at bit 'n' indicates that message register 'n' can receive interrupts.
+ The type shall be <prop-encoded-array>. If not present, then all of
+ the message registers in the block are available.
+
+Aliases:
+
+ An alias should be created for every message register block. They are not
+ required, though. However, are particular implementation of this binding
+ may require aliases to be present. Aliases are of the form
+ 'mpic-msgr-block<n>', where <n> is an integer specifying the block's number.
+ Numbers shall start at 0.
+
+Example:
+
+ aliases {
+ mpic-msgr-block0 = &mpic_msgr_block0;
+ mpic-msgr-block1 = &mpic_msgr_block1;
+ };
+
+ mpic_msgr_block0: mpic-msgr-block@41400 {
+ compatible = "fsl,mpic-v3.1-msgr";
+ reg = <0x41400 0x200>;
+ // Message registers 0 and 2 in this block can receive interrupts on
+ // sources 0xb0 and 0xb2, respectively.
+ interrupts = <0xb0 2 0xb2 2>;
+ mpic-msgr-receive-mask = <0x5>;
+ };
+
+ mpic_msgr_block1: mpic-msgr-block@42400 {
+ compatible = "fsl,mpic-v3.1-msgr";
+ reg = <0x42400 0x200>;
+ // Message registers 0 and 2 in this block can receive interrupts on
+ // sources 0xb4 and 0xb6, respectively.
+ interrupts = <0xb4 2 0xb6 2>;
+ mpic-msgr-receive-mask = <0x5>;
+ };
+
--
1.6.3.3
^ permalink raw reply related [flat|nested] 7+ messages in thread
* [PATCH v2 2/2] powerpc: add support for MPIC message register API
2011-05-20 16:36 [PATCH v2 0/2] powerpc: define and implement MPIC message register support Meador Inge
2011-05-20 16:36 ` [PATCH v2 1/2] powerpc: document the FSL MPIC message register binding Meador Inge
@ 2011-05-20 16:36 ` Meador Inge
[not found] ` <BANLkTikvDEG4DSvVMtxa8=i=NV=o=DQLXA@mail.gmail.com>
2 siblings, 0 replies; 7+ messages in thread
From: Meador Inge @ 2011-05-20 16:36 UTC (permalink / raw)
To: linuxppc-dev; +Cc: openmcapi-dev, devicetree-discuss, Hollis Blanchard
Some MPIC implementations contain one or more blocks of message registers
that are used to send messages between cores via IPIs. A simple API has
been added to access (get/put, read, write, etc ...) these message registers.
The available message registers are initially discovered via nodes in the
device tree. A separate commit contains a binding for the message register
nodes.
Signed-off-by: Meador Inge <meador_inge@mentor.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Hollis Blanchard <hollis_blanchard@mentor.com>
---
arch/powerpc/include/asm/mpic_msgr.h | 35 +++++
arch/powerpc/platforms/Kconfig | 8 +
arch/powerpc/sysdev/Makefile | 3 +-
arch/powerpc/sysdev/mpic_msgr.c | 279 ++++++++++++++++++++++++++++++++++
4 files changed, 324 insertions(+), 1 deletions(-)
create mode 100644 arch/powerpc/include/asm/mpic_msgr.h
create mode 100644 arch/powerpc/sysdev/mpic_msgr.c
diff --git a/arch/powerpc/include/asm/mpic_msgr.h b/arch/powerpc/include/asm/mpic_msgr.h
new file mode 100644
index 0000000..370dcb4
--- /dev/null
+++ b/arch/powerpc/include/asm/mpic_msgr.h
@@ -0,0 +1,35 @@
+/*
+ * Copyright 2011-2012, Meador Inge, Mentor Graphics Corporation.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2 of the
+ * License.
+ *
+ */
+
+#ifndef _ASM_MPIC_MSGR_H
+#define _ASM_MPIC_MSGR_H
+
+#include <linux/types.h>
+
+struct mpic_msgr {
+ u32 __iomem *addr;
+ u32 __iomem *mer;
+ u32 __iomem *msr;
+ int irq;
+ atomic_t in_use;
+ int num;
+};
+
+extern struct mpic_msgr* mpic_msgr_get(unsigned int reg_num);
+extern void mpic_msgr_put(struct mpic_msgr* msgr);
+extern void mpic_msgr_enable(struct mpic_msgr *msgr);
+extern void mpic_msgr_disable(struct mpic_msgr *msgr);
+extern void mpic_msgr_write(struct mpic_msgr *msgr, u32 message);
+extern u32 mpic_msgr_read(struct mpic_msgr *msgr);
+extern void mpic_msgr_clear(struct mpic_msgr *msgr);
+extern void mpic_msgr_set_destination(struct mpic_msgr *msgr, u32 cpu_num);
+extern int mpic_msgr_get_irq(struct mpic_msgr *msgr);
+
+#endif
diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig
index f7b0772..4d65593 100644
--- a/arch/powerpc/platforms/Kconfig
+++ b/arch/powerpc/platforms/Kconfig
@@ -78,6 +78,14 @@ config MPIC_WEIRD
bool
default n
+config MPIC_MSGR
+ bool "MPIC message register support"
+ depends on MPIC
+ default n
+ help
+ Enables support for the MPIC message registers. These
+ registers are used for inter-processor communication.
+
config PPC_I8259
bool
default n
diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile
index 1e0c933..6d40185 100644
--- a/arch/powerpc/sysdev/Makefile
+++ b/arch/powerpc/sysdev/Makefile
@@ -3,7 +3,8 @@ subdir-ccflags-$(CONFIG_PPC_WERROR) := -Werror
ccflags-$(CONFIG_PPC64) := -mno-minimal-toc
mpic-msi-obj-$(CONFIG_PCI_MSI) += mpic_msi.o mpic_u3msi.o mpic_pasemi_msi.o
-obj-$(CONFIG_MPIC) += mpic.o $(mpic-msi-obj-y)
+mpic-msgr-obj-$(CONFIG_MPIC_MSGR) += mpic_msgr.o
+obj-$(CONFIG_MPIC) += mpic.o $(mpic-msi-obj-y) $(mpic-msgr-obj-y)
fsl-msi-obj-$(CONFIG_PCI_MSI) += fsl_msi.o
obj-$(CONFIG_PPC_MSI_BITMAP) += msi_bitmap.o
diff --git a/arch/powerpc/sysdev/mpic_msgr.c b/arch/powerpc/sysdev/mpic_msgr.c
new file mode 100644
index 0000000..bfa0612
--- /dev/null
+++ b/arch/powerpc/sysdev/mpic_msgr.c
@@ -0,0 +1,279 @@
+/*
+ * Copyright 2011-2012, Meador Inge, Mentor Graphics Corporation.
+ *
+ * Some ideas based on un-pushed work done by Vivek Mahajan, Jason Jin, and
+ * Mingkai Hu from Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2 of the
+ * License.
+ *
+ */
+
+#include <linux/list.h>
+#include <linux/of_platform.h>
+#include <linux/errno.h>
+#include <asm/prom.h>
+#include <asm/hw_irq.h>
+#include <asm/ppc-pci.h>
+#include <asm/mpic_msgr.h>
+
+#define MPIC_MSGR_REGISTERS_PER_BLOCK 4
+#define MSGR_INUSE 0
+#define MSGR_FREE 1
+
+/* Internal structure used *only* for IO mapping register blocks. */
+struct mpic_msgr_block {
+ struct msgr {
+ u32 msgr;
+ u8 res[12];
+ } msgrs[MPIC_MSGR_REGISTERS_PER_BLOCK];
+ u8 res0[192];
+ u32 mer;
+ u8 res1[12];
+ u32 msr;
+};
+
+static struct mpic_msgr **mpic_msgrs = 0;
+static unsigned int mpic_msgr_count = 0;
+
+struct mpic_msgr* mpic_msgr_get(unsigned int reg_num)
+{
+ struct mpic_msgr* msgr;
+
+ if (reg_num >= mpic_msgr_count)
+ return ERR_PTR(-ENODEV);
+
+ msgr = mpic_msgrs[reg_num];
+
+ if (atomic_cmpxchg(&msgr->in_use, MSGR_FREE, MSGR_INUSE) == MSGR_FREE)
+ return msgr;
+
+ return ERR_PTR(-EBUSY);
+}
+EXPORT_SYMBOL(mpic_msgr_get);
+
+void mpic_msgr_put(struct mpic_msgr* msgr)
+{
+ atomic_set(&msgr->in_use, MSGR_FREE);
+}
+EXPORT_SYMBOL(mpic_msgr_put);
+
+void mpic_msgr_enable(struct mpic_msgr *msgr)
+{
+ out_be32(msgr->mer, in_be32(msgr->mer) | (1 << msgr->num));
+}
+EXPORT_SYMBOL(mpic_msgr_enable);
+
+void mpic_msgr_disable(struct mpic_msgr *msgr)
+{
+ out_be32(msgr->mer, in_be32(msgr->mer) & ~(1 << msgr->num));
+}
+EXPORT_SYMBOL(mpic_msgr_disable);
+
+void mpic_msgr_write(struct mpic_msgr *msgr, u32 message)
+{
+ out_be32(msgr->addr, message);
+}
+EXPORT_SYMBOL(mpic_msgr_write);
+
+u32 mpic_msgr_read(struct mpic_msgr *msgr)
+{
+ return in_be32(msgr->addr);
+}
+EXPORT_SYMBOL(mpic_msgr_read);
+
+void mpic_msgr_clear(struct mpic_msgr *msgr)
+{
+ (void) mpic_msgr_read(msgr);
+}
+EXPORT_SYMBOL(mpic_msgr_clear);
+
+void mpic_msgr_set_destination(struct mpic_msgr *msgr, u32 cpu_num)
+{
+ out_be32(msgr->addr, 1 << cpu_num);
+}
+EXPORT_SYMBOL(mpic_msgr_set_destination);
+
+int mpic_msgr_get_irq(struct mpic_msgr *msgr)
+{
+ return msgr->irq;
+}
+EXPORT_SYMBOL(mpic_msgr_get_irq);
+
+/* The following three functions are used to compute the order and number of
+ * the message register blocks. They are clearly very inefficent. However,
+ * they are called *only* a few times during device initialization.
+ */
+static unsigned int mpic_msgr_number_of_blocks(void)
+{
+ unsigned int count;
+ struct device_node *aliases;
+
+ count = 0;
+ aliases = of_find_node_by_name(NULL, "aliases");
+
+ if (aliases) {
+ char buf[32];
+
+ for (;;) {
+ snprintf(buf, sizeof(buf), "mpic-msgr-block%d", count);
+ if (!of_find_property(aliases, buf, NULL))
+ break;
+
+ count += 1;
+ }
+ }
+
+ return count;
+}
+
+static unsigned int mpic_msgr_number_of_registers(void)
+{
+ return mpic_msgr_number_of_blocks() * MPIC_MSGR_REGISTERS_PER_BLOCK;
+}
+
+static int mpic_msgr_block_number(struct device_node *node)
+{
+ struct device_node *aliases;
+ unsigned int index, number_of_blocks;
+ char buf[64];
+
+ number_of_blocks = mpic_msgr_number_of_blocks();
+ aliases = of_find_node_by_name(NULL, "aliases");
+ if (!aliases)
+ return -1;
+
+ for (index = 0; index < number_of_blocks; ++index) {
+ struct property *prop;
+
+ snprintf(buf, sizeof(buf), "mpic-msgr-block%d", index);
+ prop = of_find_property(aliases, buf, NULL);
+ if (node == of_find_node_by_path(prop->value))
+ break;
+ }
+
+ return index == number_of_blocks ? -1 : index;
+}
+
+/* The probe function for a single message register block.
+ */
+static __devinit int mpic_msgr_probe(struct platform_device *dev)
+{
+ struct mpic_msgr_block __iomem *msgr_block;
+ int block_number;
+ struct resource rsrc;
+ unsigned int i;
+ unsigned int irq_index;
+ struct device_node *np = dev->dev.of_node;
+ unsigned int receive_mask;
+ const unsigned int *prop;
+
+ if (!np) {
+ dev_err(&dev->dev, "Device OF-Node is NULL");
+ return -EFAULT;
+ }
+
+ /* Allocate the message register array upon the first device
+ * registered.
+ */
+ if (!mpic_msgrs) {
+ mpic_msgr_count = mpic_msgr_number_of_registers();
+ dev_info(&dev->dev, "Found %d message registers\n", mpic_msgr_count);
+
+ mpic_msgrs = kzalloc(sizeof(struct mpic_msgr) * mpic_msgr_count,
+ GFP_KERNEL);
+ if (!mpic_msgrs) {
+ dev_err(&dev->dev, "No memory for message register blocks\n");
+ return -ENOMEM;
+ }
+ }
+ dev_info(&dev->dev, "Of-device full name %s\n", np->full_name);
+
+ /* IO map the message register block. */
+ of_address_to_resource(np, 0, &rsrc);
+ msgr_block = ioremap(rsrc.start, rsrc.end - rsrc.start);
+ if (!msgr_block) {
+ dev_err(&dev->dev, "Failed to iomap MPIC message registers");
+ return -EFAULT;
+ }
+
+ /* Ensure the block has a defined order. */
+ block_number = mpic_msgr_block_number(np);
+ if (block_number < 0) {
+ dev_err(&dev->dev, "Failed to find message register block alias\n");
+ return -ENODEV;
+ }
+ dev_info(&dev->dev, "Setting up message register block %d\n", block_number);
+
+ /* Grab the receive mask which specifies what registers can receive
+ * interrupts.
+ */
+ prop = of_get_property(np, "mpic-msgr-receive-mask", NULL);
+ receive_mask = (prop) ? *prop : 0xF;
+
+ /* Build up the appropriate message register data structures. */
+ for (i = 0, irq_index = 0; i < MPIC_MSGR_REGISTERS_PER_BLOCK; ++i) {
+ struct mpic_msgr *msgr;
+ unsigned int reg_number;
+
+ msgr = kzalloc(sizeof(struct mpic_msgr), GFP_KERNEL);
+ if (!msgr) {
+ dev_err(&dev->dev, "No memory for message register\n");
+ return -ENOMEM;
+ }
+
+ reg_number = block_number * MPIC_MSGR_REGISTERS_PER_BLOCK + i;
+ msgr->addr = &msgr_block->msgrs[i].msgr;
+ msgr->mer = &msgr_block->mer;
+ msgr->msr = &msgr_block->msr;
+ atomic_set(&msgr->in_use, MSGR_FREE);
+ msgr->num = reg_number;
+
+ if (receive_mask & (1 << i)) {
+ struct resource irq;
+
+ if (of_irq_to_resource(np, irq_index, &irq) == NO_IRQ) {
+ dev_err(&dev->dev, "Missing interrupt specifier");
+ kfree(msgr);
+ return -EFAULT;
+ }
+ msgr->irq = irq.start;
+ irq_index += 1;
+ } else {
+ msgr->irq = NO_IRQ;
+ }
+
+ mpic_msgrs[reg_number] = msgr;
+ mpic_msgr_disable(msgr);
+ dev_info(&dev->dev, "Register %d initialized: irq %d\n",
+ msgr->num, msgr->irq);
+
+ }
+
+ return 0;
+}
+
+static const struct of_device_id mpic_msgr_ids[] = {
+ {
+ .compatible = "fsl,mpic-v3.1-msgr",
+ .data = NULL,
+ },
+ {}
+};
+
+static struct platform_driver mpic_msgr_driver = {
+ .driver = {
+ .name = "mpic-msgr",
+ .owner = THIS_MODULE,
+ .of_match_table = mpic_msgr_ids,
+ },
+ .probe = mpic_msgr_probe,
+};
+
+static __init int mpic_msgr_init(void)
+{
+ return platform_driver_register(&mpic_msgr_driver);
+}
+subsys_initcall(mpic_msgr_init);
--
1.6.3.3
^ permalink raw reply related [flat|nested] 7+ messages in thread
* Re: [PATCH v2 0/2] powerpc: define and implement MPIC message register support
[not found] ` <BANLkTikvDEG4DSvVMtxa8=i=NV=o=DQLXA@mail.gmail.com>
@ 2011-05-26 14:21 ` Meador Inge
0 siblings, 0 replies; 7+ messages in thread
From: Meador Inge @ 2011-05-26 14:21 UTC (permalink / raw)
To: linuxppc-dev; +Cc: Scott Wood
Scott, I addressed your feedback in this patch set:
* 1/2 - http://lists.ozlabs.org/pipermail/linuxppc-dev/2011-May/090405.html
* 2/2 - http://lists.ozlabs.org/pipermail/linuxppc-dev/2011-May/090406.html
Ben, my Cc for you didn't go through the first time.
> This patch set defines a binding for FSL MPIC message registers and implements
> an API for accessing those message registers. Testing was done on a MPC8572DS
> in an Linux-Linux AMP setup using OpenMCAPI (www.openmcapi.org) to communicate
> between OS instances. The message register API is used by the OpenMCAPI shared
> memory driver to send notifications between cores.
>
> * v2 - Incorporate feedback from Scott Wood
> * Make binding less implementation specific.
> * Add 'mpic-' prefix to message register node properties and aliases.
> * Remove 'interrupt-parent' from binding.
> * Fixed some example bugs with receive masks.
>
> Signed-off-by: Meador Inge <meador_inge@mentor.com>
> Cc: Hollis Blanchard <hollis_blanchard@mentor.com>
>
> Meador Inge (2):
> powerpc: document the FSL MPIC message register binding
> powerpc: add support for MPIC message register API
>
> .../devicetree/bindings/powerpc/fsl/mpic-msgr.txt | 62 +++++
> arch/powerpc/include/asm/mpic_msgr.h | 35 +++
> arch/powerpc/platforms/Kconfig | 8 +
> arch/powerpc/sysdev/Makefile | 3 +-
> arch/powerpc/sysdev/mpic_msgr.c | 279 ++++++++++++++++++++
> 5 files changed, 386 insertions(+), 1 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/powerpc/fsl/mpic-msgr.txt
> create mode 100644 arch/powerpc/include/asm/mpic_msgr.h
> create mode 100644 arch/powerpc/sysdev/mpic_msgr.c
>
> _______________________________________________
> Linuxppc-dev mailing list
> Linuxppc-dev@lists.ozlabs.org
> https://lists.ozlabs.org/listinfo/linuxppc-dev
--
Meador Inge
CodeSourcery / Mentor Embedded
http://www.mentor.com/embedded-software
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH v2 1/2] powerpc: document the FSL MPIC message register binding
2011-05-20 16:36 ` [PATCH v2 1/2] powerpc: document the FSL MPIC message register binding Meador Inge
@ 2011-05-26 20:03 ` Scott Wood
2011-05-26 20:06 ` Scott Wood
1 sibling, 0 replies; 7+ messages in thread
From: Scott Wood @ 2011-05-26 20:03 UTC (permalink / raw)
To: Meador Inge
Cc: openmcapi-dev, Hollis Blanchard, devicetree-discuss, linuxppc-dev
On Fri, 20 May 2011 11:36:38 -0500
Meador Inge <meador_inge@mentor.com> wrote:
> This binding documents how the message register blocks found in some FSL
> MPIC implementations shall be represented in a device tree.
>
> Signed-off-by: Meador Inge <meador_inge@mentor.com>
> Cc: Hollis Blanchard <hollis_blanchard@mentor.com>
> Cc: Grant Likely <grant.likely@secretlab.ca>
> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Scott Wood <scottwood@freescale.com>
> ---
> .../devicetree/bindings/powerpc/fsl/mpic-msgr.txt | 62 ++++++++++++++++++++
> 1 files changed, 62 insertions(+), 0 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/powerpc/fsl/mpic-msgr.txt
>
> diff --git a/Documentation/devicetree/bindings/powerpc/fsl/mpic-msgr.txt b/Documentation/devicetree/bindings/powerpc/fsl/mpic-msgr.txt
> new file mode 100644
> index 0000000..385dba6
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/powerpc/fsl/mpic-msgr.txt
> @@ -0,0 +1,62 @@
> +* FSL MPIC Message Registers
> +
> +This binding specifies what properties must be available in the device tree
> +representation of the message register groups found in some FSL MPIC
> +implementations.
> +
> +Required properties:
> +
> + - compatible: Specifies the compatibility list for the message register
> + block. The type shall be <string> and the value shall be of the form
> + "fsl,mpic-v<version>-msgr", where <version> is the version number of
> + the MPIC containing the message registers.
> +
> + - reg: Specifies the base physical address(s) and size(s) of the
> + message register block's addressable register space. The type shall be
> + <prop-encoded-array>.
> +
> + - interrupts: Specifies a list of interrupt source and level-sense pairs.
> + The type shall be <prop-encoded-array>. The length shall be equal to
> + the number of bits set in the 'msg-receive-mask' property value.
> +
> +Optional properties:
> +
> + - mpic-msgr-receive-mask: Specifies what registers in the containing block
> + are allowed to receive interrupts. The value is a bit mask where a set
> + bit at bit 'n' indicates that message register 'n' can receive interrupts.
> + The type shall be <prop-encoded-array>. If not present, then all of
> + the message registers in the block are available.
> +
> +Aliases:
> +
> + An alias should be created for every message register block. They are not
> + required, though. However, are particular implementation of this binding
> + may require aliases to be present. Aliases are of the form
> + 'mpic-msgr-block<n>', where <n> is an integer specifying the block's number.
> + Numbers shall start at 0.
> +
> +Example:
> +
> + aliases {
> + mpic-msgr-block0 = &mpic_msgr_block0;
> + mpic-msgr-block1 = &mpic_msgr_block1;
> + };
> +
> + mpic_msgr_block0: mpic-msgr-block@41400 {
> + compatible = "fsl,mpic-v3.1-msgr";
> + reg = <0x41400 0x200>;
> + // Message registers 0 and 2 in this block can receive interrupts on
> + // sources 0xb0 and 0xb2, respectively.
> + interrupts = <0xb0 2 0xb2 2>;
> + mpic-msgr-receive-mask = <0x5>;
> + };
> +
> + mpic_msgr_block1: mpic-msgr-block@42400 {
> + compatible = "fsl,mpic-v3.1-msgr";
> + reg = <0x42400 0x200>;
> + // Message registers 0 and 2 in this block can receive interrupts on
> + // sources 0xb4 and 0xb6, respectively.
> + interrupts = <0xb4 2 0xb6 2>;
> + mpic-msgr-receive-mask = <0x5>;
> + };
> +
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH v2 1/2] powerpc: document the FSL MPIC message register binding
2011-05-20 16:36 ` [PATCH v2 1/2] powerpc: document the FSL MPIC message register binding Meador Inge
2011-05-26 20:03 ` Scott Wood
@ 2011-05-26 20:06 ` Scott Wood
2011-05-31 19:19 ` Meador Inge
1 sibling, 1 reply; 7+ messages in thread
From: Scott Wood @ 2011-05-26 20:06 UTC (permalink / raw)
To: Meador Inge
Cc: openmcapi-dev, Hollis Blanchard, devicetree-discuss, linuxppc-dev
On Fri, 20 May 2011 11:36:38 -0500
Meador Inge <meador_inge@mentor.com> wrote:
> This binding documents how the message register blocks found in some FSL
> MPIC implementations shall be represented in a device tree.
>
> Signed-off-by: Meador Inge <meador_inge@mentor.com>
> Cc: Hollis Blanchard <hollis_blanchard@mentor.com>
> Cc: Grant Likely <grant.likely@secretlab.ca>
> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
> ---
> .../devicetree/bindings/powerpc/fsl/mpic-msgr.txt | 62 ++++++++++++++++++++
> 1 files changed, 62 insertions(+), 0 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/powerpc/fsl/mpic-msgr.txt
>
> diff --git a/Documentation/devicetree/bindings/powerpc/fsl/mpic-msgr.txt b/Documentation/devicetree/bindings/powerpc/fsl/mpic-msgr.txt
> new file mode 100644
> index 0000000..385dba6
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/powerpc/fsl/mpic-msgr.txt
> @@ -0,0 +1,62 @@
> +* FSL MPIC Message Registers
> +
> +This binding specifies what properties must be available in the device tree
> +representation of the message register groups found in some FSL MPIC
> +implementations.
> +
> +Required properties:
> +
> + - compatible: Specifies the compatibility list for the message register
> + block. The type shall be <string> and the value shall be of the form
> + "fsl,mpic-v<version>-msgr", where <version> is the version number of
> + the MPIC containing the message registers.
> +
> + - reg: Specifies the base physical address(s) and size(s) of the
> + message register block's addressable register space. The type shall be
> + <prop-encoded-array>.
> +
> + - interrupts: Specifies a list of interrupt source and level-sense pairs.
> + The type shall be <prop-encoded-array>. The length shall be equal to
> + the number of bits set in the 'msg-receive-mask' property value.
Oh, just noticed -- mismatch between msg-receive-mask here...
> +
> +Optional properties:
> +
> + - mpic-msgr-receive-mask: Specifies what registers in the containing block
> + are allowed to receive interrupts. The value is a bit mask where a set
> + bit at bit 'n' indicates that message register 'n' can receive interrupts.
> + The type shall be <prop-encoded-array>. If not present, then all of
> + the message registers in the block are available.
...and mpic-msgr-receive-mask here.
Might want to just say "equal to the number of registers that are
available for receiving interrupts", to more clearly apply to the case where
mpic-msgr-receive-mask is missing.
-Scott
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH v2 1/2] powerpc: document the FSL MPIC message register binding
2011-05-26 20:06 ` Scott Wood
@ 2011-05-31 19:19 ` Meador Inge
0 siblings, 0 replies; 7+ messages in thread
From: Meador Inge @ 2011-05-31 19:19 UTC (permalink / raw)
To: Scott Wood
Cc: openmcapi-dev, Hollis Blanchard, devicetree-discuss, linuxppc-dev
On 05/26/2011 03:06 PM, Scott Wood wrote:
>> > + - interrupts: Specifies a list of interrupt source and level-sense pairs.
>> > + The type shall be <prop-encoded-array>. The length shall be equal to
>> > + the number of bits set in the 'msg-receive-mask' property value.
> Oh, just noticed -- mismatch between msg-receive-mask here...
>
>> > +
>> > +Optional properties:
>> > +
>> > + - mpic-msgr-receive-mask: Specifies what registers in the containing block
>> > + are allowed to receive interrupts. The value is a bit mask where a set
>> > + bit at bit 'n' indicates that message register 'n' can receive interrupts.
>> > + The type shall be <prop-encoded-array>. If not present, then all of
>> > + the message registers in the block are available.
> ...and mpic-msgr-receive-mask here.
>
> Might want to just say "equal to the number of registers that are
> available for receiving interrupts", to more clearly apply to the case where
> mpic-msgr-receive-mask is missing.
>
Thanks; fixed.
--
Meador Inge
CodeSourcery / Mentor Embedded
http://www.mentor.com/embedded-software
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2011-05-31 19:19 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2011-05-20 16:36 [PATCH v2 0/2] powerpc: define and implement MPIC message register support Meador Inge
2011-05-20 16:36 ` [PATCH v2 1/2] powerpc: document the FSL MPIC message register binding Meador Inge
2011-05-26 20:03 ` Scott Wood
2011-05-26 20:06 ` Scott Wood
2011-05-31 19:19 ` Meador Inge
2011-05-20 16:36 ` [PATCH v2 2/2] powerpc: add support for MPIC message register API Meador Inge
[not found] ` <BANLkTikvDEG4DSvVMtxa8=i=NV=o=DQLXA@mail.gmail.com>
2011-05-26 14:21 ` [PATCH v2 0/2] powerpc: define and implement MPIC message register support Meador Inge
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).