* [PATCH v2] powerpc/85xx: Enable MTD/NOR/NAND options by default in defconfig
@ 2012-04-26 10:43 Shengzhou Liu
2012-04-26 19:43 ` Scott Wood
0 siblings, 1 reply; 2+ messages in thread
From: Shengzhou Liu @ 2012-04-26 10:43 UTC (permalink / raw)
To: linuxppc-dev; +Cc: linux-mtd, Shengzhou Liu
Enable MTD/NOR/NAND options by default in mpc85xx_defconfig and
mpc85xx_smp_defconfig to support NOR, NAND flash.
Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>
---
based on master branch of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git
changes of v2: remove typo "CONFIG_MPC8xxx_GPIO=y" compared with v1.
arch/powerpc/configs/mpc85xx_defconfig | 25 +++++++++++++++++++++++++
arch/powerpc/configs/mpc85xx_smp_defconfig | 25 +++++++++++++++++++++++++
2 files changed, 50 insertions(+), 0 deletions(-)
diff --git a/arch/powerpc/configs/mpc85xx_defconfig b/arch/powerpc/configs/mpc85xx_defconfig
index d6b6df5..0f55408 100644
--- a/arch/powerpc/configs/mpc85xx_defconfig
+++ b/arch/powerpc/configs/mpc85xx_defconfig
@@ -74,6 +74,31 @@ CONFIG_INET_ESP=y
CONFIG_IPV6=y
CONFIG_IP_SCTP=m
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_FTL=y
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_CFI_UTIL=y
+CONFIG_MTD_PHYSMAP_OF=y
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_OF_PARTS=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_VERIFY_WRITE=y
+CONFIG_MTD_NAND_FSL_ELBC=y
+CONFIG_MTD_NAND_FSL_IFC=y
+CONFIG_MTD_NAND_IDS=y
+CONFIG_MTD_NAND_ECC=y
+CONFIG_MTD_M25P80=y
CONFIG_PROC_DEVICETREE=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_NBD=y
diff --git a/arch/powerpc/configs/mpc85xx_smp_defconfig b/arch/powerpc/configs/mpc85xx_smp_defconfig
index 5b0e292..31ef74f 100644
--- a/arch/powerpc/configs/mpc85xx_smp_defconfig
+++ b/arch/powerpc/configs/mpc85xx_smp_defconfig
@@ -76,6 +76,31 @@ CONFIG_INET_ESP=y
CONFIG_IPV6=y
CONFIG_IP_SCTP=m
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_FTL=y
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_CFI_UTIL=y
+CONFIG_MTD_PHYSMAP_OF=y
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_OF_PARTS=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_VERIFY_WRITE=y
+CONFIG_MTD_NAND_FSL_ELBC=y
+CONFIG_MTD_NAND_FSL_IFC=y
+CONFIG_MTD_NAND_IDS=y
+CONFIG_MTD_NAND_ECC=y
+CONFIG_MTD_M25P80=y
CONFIG_PROC_DEVICETREE=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_NBD=y
--
1.6.4
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH v2] powerpc/85xx: Enable MTD/NOR/NAND options by default in defconfig
2012-04-26 10:43 [PATCH v2] powerpc/85xx: Enable MTD/NOR/NAND options by default in defconfig Shengzhou Liu
@ 2012-04-26 19:43 ` Scott Wood
0 siblings, 0 replies; 2+ messages in thread
From: Scott Wood @ 2012-04-26 19:43 UTC (permalink / raw)
To: Shengzhou Liu; +Cc: linux-mtd, linuxppc-dev
On 04/26/2012 05:43 AM, Shengzhou Liu wrote:
> +CONFIG_MTD_NAND_VERIFY_WRITE=y
I don't think we want this on by default.
-Scott
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2012-04-26 19:43 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2012-04-26 10:43 [PATCH v2] powerpc/85xx: Enable MTD/NOR/NAND options by default in defconfig Shengzhou Liu
2012-04-26 19:43 ` Scott Wood
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).