* How to setup linux to the vxworks system?
@ 2013-10-14 14:47 Alexey Karpov
0 siblings, 0 replies; only message in thread
From: Alexey Karpov @ 2013-10-14 14:47 UTC (permalink / raw)
To: linuxppc-dev
Hello!
I have a xerox print controller (an "serial number HFT"), used in xerox
8825, 8830 and 510 wide format print systems, and wish to use it as a
little home server. It based on powerpc G4 (MPC7410) and equipped with 2
PCI slots, 2 DIMM slots, intel-based integrated network card and 2
firewire ports. There is no video adapter, communication is done via
RS-232 port.
The problem is installed OS - vxworks and vxworks bootloader. I try to
load linux kernel with this bootloader, but kernel crashed. Next i try
to load yaboot (i get it from debian), yaboot seems to be running, but
trying to write her output to nonexistent videocard. I was try to google
about how to compile yaboot with uart support, but can't find anything.
Can you help me with booting linux kernel with vxworks bootloader, or
reflashing this strange device to openfirmware, u-boot, or other
bootloader to boot linux.
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2013-10-14 14:48 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2013-10-14 14:47 How to setup linux to the vxworks system? Alexey Karpov
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).