linuxppc-dev.lists.ozlabs.org archive mirror
 help / color / mirror / Atom feed
From: Michael Ellerman <mpe@ellerman.id.au>
To: Christophe Leroy <christophe.leroy@c-s.fr>,
	Benjamin Herrenschmidt <benh@kernel.crashing.org>,
	Paul Mackerras <paulus@samba.org>,
	Nicholas Piggin <npiggin@gmail.com>
Cc: linuxppc-dev@lists.ozlabs.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v15 00/13] powerpc: Switch to CONFIG_THREAD_INFO_IN_TASK
Date: Mon, 04 Feb 2019 22:20:20 +1100	[thread overview]
Message-ID: <8736p3ol57.fsf@concordia.ellerman.id.au> (raw)
In-Reply-To: <cover.1548852242.git.christophe.leroy@c-s.fr>

Christophe Leroy <christophe.leroy@c-s.fr> writes:

> The purpose of this serie is to activate CONFIG_THREAD_INFO_IN_TASK which
> moves the thread_info into task_struct.

Hi Christophe,

I've taken this series and split some of the patches up a bit more.

I'll just run it through some tests and then post my version.

cheers


> Moving thread_info into task_struct has the following advantages:
> - It protects thread_info from corruption in the case of stack
> overflows.
> - Its address is harder to determine if stack addresses are
> leaked, making a number of attacks more difficult.
>
> Changes in v15:
>  - switched patch 1 and 2.
>  - resync patch 1 with linux/next. As memblock modifications are now fully merged in
>  linux-mm tree, this patch voids as soon as linux-mm gets merged into powerpc/merge branch
>  - Fixed build failure on 64le due to call to __save_stack_trace_tsk_reliable() (patch 5)
>  - Taken the renaming of THREAD_INFO to TASK_STACK out of the preparation patch to ease review (hence new patch 6)
>  - Fixed one place where r11 (physical address of stack) was used instead of r1 to locate
>  thread_info, inducing a bug when switching to r2 which is virtual address of current (patch 7)
>  - Keeping physical address of current in r2 until MMU translation is reactivated (patch 11)
>
> Changes in v14 (ie since v13):
>  - Added in front a fixup patch which conflicts with this serie
>  - Added a patch for using try_get_task_stack()/put_task_stack() in stack walkers.
>  - Fixed compilation failure in the preparation patch (by moving the modification
>  of klp_init_thread_info() to the following patch)
>
> Changes since v12:
>  - Patch 1: Taken comment from Mike (re-introduced the 'panic' in case memblock allocation fails in setup_64.c
>  - Patch 1: Added alloc_stack() function in setup_32.c to also panic in case of allocation failure.
>
> Changes since v11:
>  - Rebased on 81775f5563fa ("Automatic merge of branches 'master', 'next' and 'fixes' into merge")
>  - Added a first patch to change memblock allocs to functions returning virtual addrs. This removes
>    the memset() which were the only remaining stuff in irq_ctx_init() and exc_lvl_ctx_init() at the end.
>  - dropping irq_ctx_init() and exc_lvl_ctx_init() in patch 5 (powerpc: Activate CONFIG_THREAD_INFO_IN_TASK)
>  - A few cosmetic changes in commit log and code.
>
> Changes since v10:
>  - Rebased on 21622a0d2023 ("Automatic merge of branches 'master', 'next' and 'fixes' into merge")
>   ==> Fixed conflict in setup_32.S
>
> Changes since v9:
>  - Rebased on 183cbf93be88 ("Automatic merge of branches 'master', 'next' and 'fixes' into merge")
>   ==> Fixed conflict on xmon
>
> Changes since v8:
>  - Rebased on e589b79e40d9 ("Automatic merge of branches 'master', 'next' and 'fixes' into merge")
>   ==> Main impact was conflicts due to commit 9a8dd708d547 ("memblock: rename memblock_alloc{_nid,_try_nid} to memblock_phys_alloc*")
>
> Changes since v7:
>  - Rebased on fb6c6ce7907d ("Automatic merge of branches 'master', 'next' and 'fixes' into merge")
>
> Changes since v6:
>  - Fixed validate_sp() to exclude NULL sp in 'regain entire stack space' patch (early crash with CONFIG_KMEMLEAK)
>
> Changes since v5:
>  - Fixed livepatch_sp setup by using end_of_stack() instead of hardcoding
>  - Fixed PPC_BPF_LOAD_CPU() macro
>
> Changes since v4:
>  - Fixed a build failure on 32bits SMP when include/generated/asm-offsets.h is not
>  already existing, was due to spaces instead of a tab in the Makefile
>
> Changes since RFC v3: (based on Nick's review)
>  - Renamed task_size.h to task_size_user64.h to better relate to what it contains.
>  - Handling of the isolation of thread_info cpu field inside CONFIG_SMP #ifdefs moved to a separate patch.
>  - Removed CURRENT_THREAD_INFO macro completely.
>  - Added a guard in asm/smp.h to avoid build failure before _TASK_CPU is defined.
>  - Added a patch at the end to rename 'tp' pointers to 'sp' pointers
>  - Renamed 'tp' into 'sp' pointers in preparation patch when relevant
>  - Fixed a few commit logs
>  - Fixed checkpatch report.
>
> Changes since RFC v2:
>  - Removed the modification of names in asm-offsets
>  - Created a rule in arch/powerpc/Makefile to append the offset of current->cpu in CFLAGS
>  - Modified asm/smp.h to use the offset set in CFLAGS
>  - Squashed the renaming of THREAD_INFO to TASK_STACK in the preparation patch
>  - Moved the modification of current_pt_regs in the patch activating CONFIG_THREAD_INFO_IN_TASK
>
> Changes since RFC v1:
>  - Removed the first patch which was modifying header inclusion order in timer
>  - Modified some names in asm-offsets to avoid conflicts when including asm-offsets in C files
>  - Modified asm/smp.h to avoid having to include linux/sched.h (using asm-offsets instead)
>  - Moved some changes from the activation patch to the preparation patch.
>
> Christophe Leroy (13):
>   powerpc/irq: use memblock functions returning virtual address
>   powerpc/32: Fix CONFIG_VIRT_CPU_ACCOUNTING_NATIVE for 40x/booke
>   book3s/64: avoid circular header inclusion in mmu-hash.h
>   powerpc: Only use task_struct 'cpu' field on SMP
>   powerpc: prep stack walkers for THREAD_INFO_IN_TASK
>   powerpc: Rename THREAD_INFO to TASK_STACK
>   powerpc: Prepare for moving thread_info into task_struct
>   powerpc: Activate CONFIG_THREAD_INFO_IN_TASK
>   powerpc: regain entire stack space
>   powerpc: 'current_set' is now a table of task_struct pointers
>   powerpc/32: Remove CURRENT_THREAD_INFO and rename TI_CPU
>   powerpc/64: Remove CURRENT_THREAD_INFO
>   powerpc: clean stack pointers naming
>
>  arch/powerpc/Kconfig                           |   1 +
>  arch/powerpc/Makefile                          |   7 ++
>  arch/powerpc/include/asm/asm-prototypes.h      |   4 +-
>  arch/powerpc/include/asm/book3s/64/mmu-hash.h  |   2 +-
>  arch/powerpc/include/asm/exception-64s.h       |   4 +-
>  arch/powerpc/include/asm/irq.h                 |  18 ++--
>  arch/powerpc/include/asm/livepatch.h           |   6 +-
>  arch/powerpc/include/asm/processor.h           |  39 +--------
>  arch/powerpc/include/asm/ptrace.h              |   2 +-
>  arch/powerpc/include/asm/reg.h                 |   2 +-
>  arch/powerpc/include/asm/smp.h                 |  17 +++-
>  arch/powerpc/include/asm/task_size_user64.h    |  42 +++++++++
>  arch/powerpc/include/asm/thread_info.h         |  19 -----
>  arch/powerpc/kernel/asm-offsets.c              |  10 ++-
>  arch/powerpc/kernel/entry_32.S                 |  80 ++++++-----------
>  arch/powerpc/kernel/entry_64.S                 |  12 +--
>  arch/powerpc/kernel/epapr_hcalls.S             |   5 +-
>  arch/powerpc/kernel/exceptions-64e.S           |  13 +--
>  arch/powerpc/kernel/exceptions-64s.S           |   2 +-
>  arch/powerpc/kernel/head_32.S                  |  14 +--
>  arch/powerpc/kernel/head_40x.S                 |   4 +-
>  arch/powerpc/kernel/head_44x.S                 |   8 +-
>  arch/powerpc/kernel/head_64.S                  |   1 +
>  arch/powerpc/kernel/head_8xx.S                 |   2 +-
>  arch/powerpc/kernel/head_booke.h               |  12 +--
>  arch/powerpc/kernel/head_fsl_booke.S           |  16 ++--
>  arch/powerpc/kernel/idle_6xx.S                 |   8 +-
>  arch/powerpc/kernel/idle_book3e.S              |   2 +-
>  arch/powerpc/kernel/idle_e500.S                |   8 +-
>  arch/powerpc/kernel/idle_power4.S              |   2 +-
>  arch/powerpc/kernel/irq.c                      | 114 +++----------------------
>  arch/powerpc/kernel/kgdb.c                     |  28 ------
>  arch/powerpc/kernel/machine_kexec_64.c         |   6 +-
>  arch/powerpc/kernel/misc_32.S                  |  17 ++--
>  arch/powerpc/kernel/process.c                  |  63 ++++++++------
>  arch/powerpc/kernel/setup-common.c             |   2 +-
>  arch/powerpc/kernel/setup_32.c                 |  26 +++---
>  arch/powerpc/kernel/setup_64.c                 |  51 +++--------
>  arch/powerpc/kernel/smp.c                      |  16 ++--
>  arch/powerpc/kernel/stacktrace.c               |  29 ++++++-
>  arch/powerpc/kernel/trace/ftrace_64_mprofile.S |   6 +-
>  arch/powerpc/kvm/book3s_hv_hmi.c               |   1 +
>  arch/powerpc/mm/hash_low_32.S                  |  14 ++-
>  arch/powerpc/net/bpf_jit32.h                   |   5 +-
>  arch/powerpc/sysdev/6xx-suspend.S              |   5 +-
>  arch/powerpc/xmon/xmon.c                       |   2 +-
>  46 files changed, 302 insertions(+), 445 deletions(-)
>  create mode 100644 arch/powerpc/include/asm/task_size_user64.h
>
> -- 
> 2.13.3

      parent reply	other threads:[~2019-02-04 11:22 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-01-31 10:08 [PATCH v15 00/13] powerpc: Switch to CONFIG_THREAD_INFO_IN_TASK Christophe Leroy
2019-01-31 10:08 ` [PATCH v15 01/13] powerpc/irq: use memblock functions returning virtual address Christophe Leroy
2019-01-31 10:08 ` [PATCH v15 02/13] powerpc/32: Fix CONFIG_VIRT_CPU_ACCOUNTING_NATIVE for 40x/booke Christophe Leroy
2019-01-31 10:08 ` [PATCH v15 03/13] book3s/64: avoid circular header inclusion in mmu-hash.h Christophe Leroy
2019-01-31 10:08 ` [PATCH v15 04/13] powerpc: Only use task_struct 'cpu' field on SMP Christophe Leroy
2019-01-31 10:08 ` [PATCH v15 05/13] powerpc: prep stack walkers for THREAD_INFO_IN_TASK Christophe Leroy
2019-01-31 10:08 ` [PATCH v15 06/13] powerpc: Rename THREAD_INFO to TASK_STACK Christophe Leroy
2019-01-31 10:08 ` [PATCH v15 07/13] powerpc: Prepare for moving thread_info into task_struct Christophe Leroy
2019-01-31 10:08 ` [PATCH v15 08/13] powerpc: Activate CONFIG_THREAD_INFO_IN_TASK Christophe Leroy
2019-01-31 10:09 ` [PATCH v15 09/13] powerpc: regain entire stack space Christophe Leroy
2019-01-31 10:09 ` [PATCH v15 10/13] powerpc: 'current_set' is now a table of task_struct pointers Christophe Leroy
2019-01-31 10:09 ` [PATCH v15 11/13] powerpc/32: Remove CURRENT_THREAD_INFO and rename TI_CPU Christophe Leroy
2019-01-31 10:09 ` [PATCH v15 12/13] powerpc/64: Remove CURRENT_THREAD_INFO Christophe Leroy
2019-01-31 10:09 ` [PATCH v15 13/13] powerpc: clean stack pointers naming Christophe Leroy
2019-02-04 11:20 ` Michael Ellerman [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=8736p3ol57.fsf@concordia.ellerman.id.au \
    --to=mpe@ellerman.id.au \
    --cc=benh@kernel.crashing.org \
    --cc=christophe.leroy@c-s.fr \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=npiggin@gmail.com \
    --cc=paulus@samba.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).