From: Christophe Leroy <christophe.leroy@c-s.fr>
To: Benjamin Herrenschmidt <benh@kernel.crashing.org>,
Paul Mackerras <paulus@samba.org>,
Michael Ellerman <mpe@ellerman.id.au>,
Nicholas Piggin <npiggin@gmail.com>
Cc: linuxppc-dev@lists.ozlabs.org, linux-kernel@vger.kernel.org
Subject: [PATCH v15 06/13] powerpc: Rename THREAD_INFO to TASK_STACK
Date: Thu, 31 Jan 2019 10:08:54 +0000 (UTC) [thread overview]
Message-ID: <b3d5109b8b34a51ec0c51eeb18d69ca07c44ed83.1548852243.git.christophe.leroy@c-s.fr> (raw)
In-Reply-To: <cover.1548852242.git.christophe.leroy@c-s.fr>
This patch renames THREAD_INFO to TASK_STACK, because it is in fact
the offset of the pointer to the stack in task_struct so this pointer
will not be impacted by the move of THREAD_INFO.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
---
arch/powerpc/kernel/asm-offsets.c | 2 +-
arch/powerpc/kernel/entry_32.S | 2 +-
arch/powerpc/kernel/head_32.S | 2 +-
arch/powerpc/kernel/head_40x.S | 4 ++--
arch/powerpc/kernel/head_8xx.S | 2 +-
arch/powerpc/kernel/head_booke.h | 4 ++--
arch/powerpc/kernel/head_fsl_booke.S | 2 +-
7 files changed, 9 insertions(+), 9 deletions(-)
diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c
index 9ffc72ded73a..23456ba3410a 100644
--- a/arch/powerpc/kernel/asm-offsets.c
+++ b/arch/powerpc/kernel/asm-offsets.c
@@ -90,7 +90,7 @@ int main(void)
DEFINE(SIGSEGV, SIGSEGV);
DEFINE(NMI_MASK, NMI_MASK);
#else
- OFFSET(THREAD_INFO, task_struct, stack);
+ OFFSET(TASK_STACK, task_struct, stack);
DEFINE(THREAD_INFO_GAP, _ALIGN_UP(sizeof(struct thread_info), 16));
OFFSET(KSP_LIMIT, thread_struct, ksp_limit);
#endif /* CONFIG_PPC64 */
diff --git a/arch/powerpc/kernel/entry_32.S b/arch/powerpc/kernel/entry_32.S
index d4c6186aa7e8..f1646d845404 100644
--- a/arch/powerpc/kernel/entry_32.S
+++ b/arch/powerpc/kernel/entry_32.S
@@ -1168,7 +1168,7 @@ ret_from_debug_exc:
mfspr r9,SPRN_SPRG_THREAD
lwz r10,SAVED_KSP_LIMIT(r1)
stw r10,KSP_LIMIT(r9)
- lwz r9,THREAD_INFO-THREAD(r9)
+ lwz r9,TASK_STACK-THREAD(r9)
CURRENT_THREAD_INFO(r10, r1)
lwz r10,TI_PREEMPT(r10)
stw r10,TI_PREEMPT(r9)
diff --git a/arch/powerpc/kernel/head_32.S b/arch/powerpc/kernel/head_32.S
index 05b08db3901d..9268e5e87949 100644
--- a/arch/powerpc/kernel/head_32.S
+++ b/arch/powerpc/kernel/head_32.S
@@ -261,7 +261,7 @@ __secondary_hold_acknowledge:
tophys(r11,r1); /* use tophys(r1) if kernel */ \
beq 1f; \
mfspr r11,SPRN_SPRG_THREAD; \
- lwz r11,THREAD_INFO-THREAD(r11); \
+ lwz r11,TASK_STACK-THREAD(r11); \
addi r11,r11,THREAD_SIZE; \
tophys(r11,r11); \
1: subi r11,r11,INT_FRAME_SIZE /* alloc exc. frame */
diff --git a/arch/powerpc/kernel/head_40x.S b/arch/powerpc/kernel/head_40x.S
index b19d78410511..3088c9f29f5e 100644
--- a/arch/powerpc/kernel/head_40x.S
+++ b/arch/powerpc/kernel/head_40x.S
@@ -115,7 +115,7 @@ _ENTRY(saved_ksp_limit)
andi. r11,r11,MSR_PR; \
beq 1f; \
mfspr r1,SPRN_SPRG_THREAD; /* if from user, start at top of */\
- lwz r1,THREAD_INFO-THREAD(r1); /* this thread's kernel stack */\
+ lwz r1,TASK_STACK-THREAD(r1); /* this thread's kernel stack */\
addi r1,r1,THREAD_SIZE; \
1: subi r1,r1,INT_FRAME_SIZE; /* Allocate an exception frame */\
tophys(r11,r1); \
@@ -158,7 +158,7 @@ _ENTRY(saved_ksp_limit)
beq 1f; \
/* COMING FROM USER MODE */ \
mfspr r11,SPRN_SPRG_THREAD; /* if from user, start at top of */\
- lwz r11,THREAD_INFO-THREAD(r11); /* this thread's kernel stack */\
+ lwz r11,TASK_STACK-THREAD(r11); /* this thread's kernel stack */\
1: addi r11,r11,THREAD_SIZE-INT_FRAME_SIZE; /* Alloc an excpt frm */\
tophys(r11,r11); \
stw r10,_CCR(r11); /* save various registers */\
diff --git a/arch/powerpc/kernel/head_8xx.S b/arch/powerpc/kernel/head_8xx.S
index 20cc816b3508..ca9207013579 100644
--- a/arch/powerpc/kernel/head_8xx.S
+++ b/arch/powerpc/kernel/head_8xx.S
@@ -142,7 +142,7 @@ instruction_counter:
tophys(r11,r1); /* use tophys(r1) if kernel */ \
beq 1f; \
mfspr r11,SPRN_SPRG_THREAD; \
- lwz r11,THREAD_INFO-THREAD(r11); \
+ lwz r11,TASK_STACK-THREAD(r11); \
addi r11,r11,THREAD_SIZE; \
tophys(r11,r11); \
1: subi r11,r11,INT_FRAME_SIZE /* alloc exc. frame */
diff --git a/arch/powerpc/kernel/head_booke.h b/arch/powerpc/kernel/head_booke.h
index 306e26c073a0..69e80e6d0d16 100644
--- a/arch/powerpc/kernel/head_booke.h
+++ b/arch/powerpc/kernel/head_booke.h
@@ -55,7 +55,7 @@ END_BTB_FLUSH_SECTION
beq 1f; \
BOOKE_CLEAR_BTB(r11) \
/* if from user, start at top of this thread's kernel stack */ \
- lwz r11, THREAD_INFO-THREAD(r10); \
+ lwz r11, TASK_STACK - THREAD(r10); \
ALLOC_STACK_FRAME(r11, THREAD_SIZE); \
1 : subi r11, r11, INT_FRAME_SIZE; /* Allocate exception frame */ \
stw r13, _CCR(r11); /* save various registers */ \
@@ -142,7 +142,7 @@ END_BTB_FLUSH_SECTION
BOOKE_CLEAR_BTB(r10) \
andi. r11,r11,MSR_PR; \
mfspr r11,SPRN_SPRG_THREAD; /* if from user, start at top of */\
- lwz r11,THREAD_INFO-THREAD(r11); /* this thread's kernel stack */\
+ lwz r11, TASK_STACK - THREAD(r11); /* this thread's kernel stack */\
addi r11,r11,EXC_LVL_FRAME_OVERHEAD; /* allocate stack frame */\
beq 1f; \
/* COMING FROM USER MODE */ \
diff --git a/arch/powerpc/kernel/head_fsl_booke.S b/arch/powerpc/kernel/head_fsl_booke.S
index 2c21e8642a00..42d8d6fc00cb 100644
--- a/arch/powerpc/kernel/head_fsl_booke.S
+++ b/arch/powerpc/kernel/head_fsl_booke.S
@@ -719,7 +719,7 @@ finish_tlb_load:
/* Get the next_tlbcam_idx percpu var */
#ifdef CONFIG_SMP
- lwz r12, THREAD_INFO-THREAD(r12)
+ lwz r12, TASK_STACK-THREAD(r12)
lwz r15, TI_CPU(r12)
lis r14, __per_cpu_offset@h
ori r14, r14, __per_cpu_offset@l
--
2.13.3
next prev parent reply other threads:[~2019-01-31 10:22 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-01-31 10:08 [PATCH v15 00/13] powerpc: Switch to CONFIG_THREAD_INFO_IN_TASK Christophe Leroy
2019-01-31 10:08 ` [PATCH v15 01/13] powerpc/irq: use memblock functions returning virtual address Christophe Leroy
2019-01-31 10:08 ` [PATCH v15 02/13] powerpc/32: Fix CONFIG_VIRT_CPU_ACCOUNTING_NATIVE for 40x/booke Christophe Leroy
2019-01-31 10:08 ` [PATCH v15 03/13] book3s/64: avoid circular header inclusion in mmu-hash.h Christophe Leroy
2019-01-31 10:08 ` [PATCH v15 04/13] powerpc: Only use task_struct 'cpu' field on SMP Christophe Leroy
2019-01-31 10:08 ` [PATCH v15 05/13] powerpc: prep stack walkers for THREAD_INFO_IN_TASK Christophe Leroy
2019-01-31 10:08 ` Christophe Leroy [this message]
2019-01-31 10:08 ` [PATCH v15 07/13] powerpc: Prepare for moving thread_info into task_struct Christophe Leroy
2019-01-31 10:08 ` [PATCH v15 08/13] powerpc: Activate CONFIG_THREAD_INFO_IN_TASK Christophe Leroy
2019-01-31 10:09 ` [PATCH v15 09/13] powerpc: regain entire stack space Christophe Leroy
2019-01-31 10:09 ` [PATCH v15 10/13] powerpc: 'current_set' is now a table of task_struct pointers Christophe Leroy
2019-01-31 10:09 ` [PATCH v15 11/13] powerpc/32: Remove CURRENT_THREAD_INFO and rename TI_CPU Christophe Leroy
2019-01-31 10:09 ` [PATCH v15 12/13] powerpc/64: Remove CURRENT_THREAD_INFO Christophe Leroy
2019-01-31 10:09 ` [PATCH v15 13/13] powerpc: clean stack pointers naming Christophe Leroy
2019-02-04 11:20 ` [PATCH v15 00/13] powerpc: Switch to CONFIG_THREAD_INFO_IN_TASK Michael Ellerman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=b3d5109b8b34a51ec0c51eeb18d69ca07c44ed83.1548852243.git.christophe.leroy@c-s.fr \
--to=christophe.leroy@c-s.fr \
--cc=benh@kernel.crashing.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=mpe@ellerman.id.au \
--cc=npiggin@gmail.com \
--cc=paulus@samba.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).